Used Log Turner for sale (1,931)

Condition: used, SPRINGER revolver log turner Hsdpfszdq N Isx Agmenn

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Log turner, infeed-outfeed conveyors, heavy duty construction Hnodpfxju N Ac Sj Agmen Equipment from 2019

Condition: ready for operation (used), Log infeed line Tähkä, equipped with a lower device for turning logs Hnjdpfx Aexg Rvgsgmjn

Condition: good (used), Polar Mohr PW-1 Pile turner This machine is like new, fully functional, and ready to use. Hnsdpfxozc Rwke Agmen Technical specifications: Format: 660x800mm Stack height: 1250mm Load capacity: 500kg Device weight: 700kg Power supply: 380V Controlled from a control panel, fast operation, hydraulic drive. Noiseless operation. Compact design, space-saving.

Condition: good (used), Hotung LK-PW1 Paper Pallet Turner, B1+ Format The machine is like new, fully functional, and ready to use. Technical Specifications: Format: 1280×800 mm Stack height: max. 1340 mm Load capacity: 1000 kg Device weight: 860 kg Hjdpfxey Ehi Dj Agmonn 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. Hnjdoy I Nugjpfx Agmsn When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Dimensions: 700mm X 1450mm Hnjdpjyz R Unsfx Agmen

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system Hnjdpfxoxz R Nis Agmsn - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m Hodpfx Aeu Smq Ssgmsnn - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: used, Premier Pallet Inverter / Turner Model FS1600 Max opening - 1575mm, Min opening 900mm Max capacity load 7,000kg Load tables dimensions 1300mm x 1250mm Cycle time 45 seconds Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure Recover damaged materials from the bottom of a load Replace wood pallets with plastic, aluminum, or other more hygienic pallets Transfer materials from a damaged pallet Hedpfx Aewkhnqogmenn Change orientation for printing and other general purposes

Condition: good (used), Manfred Rachner R 1000 PA Pile Turner The machine is in very good condition and ready for operation. Technical specifications: Format: 1030 x 740mm Hedpfx Aozc Rwqegmenn Stack height: 1400mm Load capacity: 1000kg Device weight: 850kg Power supply: 380V Stack aeration + shaking Frequency inverter control. Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: used, Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 15,200 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2003 Hjdpfxjyglfdo Agmjnn Machine number: 1658 Track width (m): 3.0 Crane type: OBX II Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.2 m Grab: included Crane position: in front of the cabin Cabin side: left Saw: 1.3 m Alpha !! Sale on behalf of customer !!

Condition: used, mileage: 274,000 km, power: 360 kW (489.46 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 15,940 kg, maximum load weight: 9,985 kg, overall weight: 26,000 kg, axle configuration: 3 axles, wheelbase: 3,900 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, all wheel drive, central locking, compressed air brake, crane, cruise control, differential lock, fog lights, onboard computer, parking heater, truck registration, Scania G490 6x6 timber transporter | Penz crane 12Z 8.70 | 2 pairs of bolster stakes | Automatic transmission, EURO 6, air conditioning | Cruise control, heated seats, auxiliary heater | Radio | Unladen weight 15,940 kg | Loading length 5.5 m, up to the crane 5.95 m | 50 mm trailer coupling | Wheelbase 3,900/1,355 mm | Subject to errors and prior sale Hnsdpfsy Ifk Rox Agmon

Condition: used, empty load weight: 6,000 kg, maximum load weight: 32,270 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2012, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schwarzmüller timber trailer 3-axle | BPW axles with disc brakes | Dead weight 6000kg | Lift axle | Tires: 385/65 R22.5 Errors, input and advance sales excepted. Hsdewdwp Djpfx Agmsnn

Condition: used, empty load weight: 5,520 kg, maximum load weight: 32,480 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 08/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller timber trailer 3-axle | SAF axles with disc brakes | Unladen weight 5,520 kg | Payload: 32,480 kg | Lift axle | Tyres: 385/65 R22.5 | 10 pairs of stakes | Subject to error, input mistakes and prior sale. Hnodpfxex S N Ubs Agmsn

Condition: used, empty load weight: 5,730 kg, maximum load weight: 32,270 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2014, next inspection (TÜV): 05/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schwarzmüller timber trailer 3-axle | BPW axles with disc brakes | Dead weight 5730 kg | Payload: 32270 kg | Lift axle | Pickerl 05/25 | Tires: 385/65 R22.5 Errors, input and advance sales excepted. Hnsdpfxowc Apyo Agmsn

Condition: used, empty load weight: 4,200 kg, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2006, front tire size: 275/70R22,5, rear tire size: 275/70R22,5, Equipment: ABS, | Ressenig timber trailer | Year: 2006 | BPW axles with drum brakes | 2 pairs of stanchions | 275/70R22.5 twin tires | 50mm towing eye | Unladen weight: 5,300 kg | Payload: 13,800 kg | Gross weight: 18,000 kg | 6 meter timber | Austrian vehicle | Air suspension | Subject to errors, changes, and prior sale. Hnedpfjrg H Aujx Agmsn

Condition: excellent (used), Catalogue number 7979 TECHNICAL DATA - Max. diameter of processed dowels: 130mm - Installed bushing: 57mm - Min. input material length: 800mm - Knife head drive motor: 18.5kW - 4 feed speeds + forward/reverse - Feed motor: 2.2kW In order: - Infeed traction rolls, toothed: 6 pcs - 3-knife head - Outfeed traction rolls, smooth: 6 pcs - Extraction port diameter: 140mm - Additional bushings included: 40, 45, 50, 75mm - Dimensions (L/W/H): 3100x1300x1400mm - Weight: 2100kg ADVANTAGES – Polish manufacture – 3-knife head – Additional bushings included: 40, 45, 50, 75mm Hedjzcc Rvjpfx Agmenn – Used dowel rounding machine, very good condition Net price: 31,900 PLN Net price: 7,590 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change with higher fluctuations)

Condition: excellent (used), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB 1. PRIMULTINI Band Saw SIC 1600 -Roll diameter 1600 mm -Roll width 245 mm -Motor 75 kW 2. PRIMULTINI Band Saw Carriage Type CFE -3 Clamping Blocks -Max. Log Diameter 1000 mm 3. PRIMULTINI Operator's Cabin Complete with Control System 4. Complete Conveyor System -Cross Feed Conveyor, 4-strand, Length approx. 12 m -Hydraulic Log Feeder -Movable Unloading Roller Conveyor with Pressure Rollers Hedpfx Agev R Edqemsnn -Cross Reloading Conveyor -Conveyor Belt Under the Roller Conveyor for Slabs -Vibrating Table for Slabs -Roller Conveyor with Cross Unloading -Roller Conveyor with Cross Unloading The complete system was built in 1999

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - subject to prior sale Hnodpfehkz Hmsx Agmsn

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,135 kg, maximum load weight: 8,665 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, total length: 8,350 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Fine-grained steel welded construction Outer frame slightly inclined with "Load-Lock profile" for attaching lashing straps Gearbox support at the front Foldable rear support 2 chock blocks with holder Under-ride guard, steel, galvanized Splash flaps at the rear, covering the entire width Quarter panel fenders according to EC standards with anti-spray splash flaps according to EC standards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Storage compartment for lashing equipment, open, under the loading area 4 lashing/spar bars recessed in the floor, running transversely across the entire width to the outer frame (max. usable inner width between the outer spar bars approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, open halfway downwards. For lashing and inserting spar bars 80 x 80 mm. 4 pairs of spar pockets recessed in the outer frame, internal dimensions 83 x 83 mm 4 spar pockets recessed in the center of the floor, with reinforcements to the main frame, internal dimensions 83 x 83 mm 6 pairs of spar bars, W=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Spar pockets/insertions are not designed for the sole securing of long materials, pipes, etc. without wrapping around. Side impact protection, aluminum Coupling device, tandem trailer Drawbar with tested 40 mm towing eye Drawbar mechanically adjustable in length by 4 x 500 mm, from 1800 - 3800 mm, drawbar length set to 1800 mm Axles + Suspension Axles according to manufacturer's choice, with tapered roller bearings and S-cam brake "Axle/chassis laser measured" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels and tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring brake parking brake Integral air reservoir 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pole fail-safe plugs at the front, with connecting cable Floor Plywood panels, approx. 30 mm thick, for high point load capacity Hnsdpoi Ri H Dofx Agmen Note: Floor deflection due to weather influences is possible! Platform length approx. 6,200 mm Operating instructions Special permit required if the overall length of the combination exceeds 18,750 mm. Observe country-specific registration regulations. Approval / Signs Country of registration: Germany with Dekra inspection and certificate Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against rust perforation

Condition: good (used), functionality: fully functional, machine/vehicle number: W092132364GA36594, empty load weight: 6,740 kg, maximum load weight: 28,260 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 07/2024, next inspection (TÜV): 08/2026, loading space length: 11,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 445/65, tire condition: 90 %, color: green, Equipment: ABS, our vehicle number #30835 2x SAF axles Hnedpszcp Ihjfx Agmon Tire size 445/65 R 22.5 Permissible total weight 35,000 kg Payload 28,260 kg Unladen weight 6,740 kg Color: green 6 pairs of extendable ExTe outriggers 2x electro-hydraulic steering axles 2x 10-ton Tecma axles Aluminum rims 40mm Meranti planks laid lengthwise ABS/EBS Raising/lowering function LT aluminum support legs Side underrun protection LED lighting Work lights 2x stainless steel toolboxes Open grid box 22 pairs of lashing points on the outside 6 pairs of outrigger pockets 6 outrigger pockets on the front wall Financing available upon request!!!

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 84010, load capacity: 1,000 kg, platform width: 800 mm, empty load weight: 1,000 kg, overall weight: 800 kg, lifting power: 1,000 kg/m, input voltage: 24 V, TOPPY pallet turner. Hodpfx Aezcnbgogmsnn

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Cab L-cab StreamSpace, 2.30 m, 170 mm tunnel * Cab suspension, comfort, air-sprung * Cab rear wall, without window * External storage compartment door, left * Exterior sun visor, transparent * Air horn * Beacon Hedpfex Tnitjx Agmonn * Central locking system * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Reversing camera * Automatic climate control * Residual heat utilization * Hot water auxiliary heater, cab * Electric stationary air conditioning system * Construction site filter * Storage compartment covers, driver and passenger side * Drawers, under bed & under sill * Storage compartment flaps, above windscreen * Electric sunroof * Refrigerator, in drawer, under bed ----Electrics & electronics Additional 12 V/15 A socket in passenger footwell * Power socket 24 V/25 A in passenger footwell * Socket 24 V/15 A in right sidewall storage * Additional functions for bodybuilder * Trailer socket 24 V, 15-pin * Reversing warning system ----Safety and assistance systems Stability control assistant * Anti-roll control assistant * Lane keeping assistant * Distance control assistant * Attention assistant * Active Brake Assist 4 * Driver airbag * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine OM470, inline 6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High performance engine brake * Air compressor, 2-cylinder * Insect protection mesh, in front of cooling system * Regulated water pump ----Powertrain Twin-plate clutch * Transmission G 281-12/14.93-1.0 * Hydraulic Auxiliary Drive (HAD) ----Chassis Leaf/air suspension * Steerable & liftable trailing axle * Drawbar trailer coupling with Doumatik ----Palfinger M10L80 YCrane_on_2 LK: * 2 hydraulic outriggers * 4 adjustable timber bolsters (ECCO ALU 4) * Elevated seat * Wood grapple * Year of manufacture: 2019 * Operating hours: 4,459 hrs * Next inspection: * Tire size front axle: 385/65R22.5 * Tire size rear axle: 315/80R22.5 * Fuel tank: 510 L * AdBlue tank: 60 L * Gross vehicle weight rating: 26,000 kg * Tare weight: 13,630 kg * Perm. trailer load: 35,000 kg * Overall length: 10,200 mm * Safety inspection valid until: 05/2026 ----Vehicle number: 11675----Subject to errors and prior sale----Advertising and various decals digitally removed.----We are happy to assist you with all paperwork involved in purchasing a vehicle. Simply let us know your requirements and suggestions and we’ll take care of the rest. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/safety inspection * Complete export processing * Arrangement of financing * Application for export license plates * Transfer of vehicles * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, The tractor unit and trailer can also be sold separately upon request. Mercedes Arocs 2546 6x4 HAD (Vehicle Number: 11765) L-cab StreamSpace driver’s cab, 2.30 m wide, 170 mm engine tunnel * Driver’s cab suspension, comfort, air-sprung * Rear cab wall without window * External storage compartment flap, left * Exterior sun visor, transparent * Air horn * Rotating beacon * Central locking system * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Reversing camera * Automatic climate control * Residual heat utilization * Additional water heating, cab * Electric stationary air conditioning * Construction site air filter * Storage compartment lids, driver and passenger side * Drawers under bed & under window ledge * Overhead storage compartments above windscreen * Electrically operated tilting roof * Refrigerator, drawer type, under bed ----Electric and electronics: additional 12 V/15 A socket, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, right sidewall storage * Additional functions for bodybuilder * 15-pin trailer socket, 24 V * Reverse warning system ----Safety and assistance systems: Stability control assistant * Anti-roll assistant * Lane keeping assistant * Distance assistant * Attention assistant * Active Brake Assist 4 * Driver airbag * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: OM470, I6, 10.7 L, 335 kW (455 hp), 2200 Nm * Euro VI D engine spec (Truck) * High performance engine brake * Two-cylinder air compressor * Insect protection grille, in front of radiator * Regulated water pump ----Drivetrain: twin-disc clutch * Transmission: G 281-12/14.93-1.0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: leaf/air suspension * Steerable and liftable trailing axle Hsdpfx Aex Tylgegmjnn * Drawbar coupling with Doumatik ----Palfinger M10L80 YCrane on 2 LK: * 2 hydraulic outriggers * 4 adjustable timber stanchions (ECCO ALU 4) * Logging seat * Timber grab * Year of manufacture: 2019 * Operating hours: 4,459 h * Next inspection: Technical data * Front axle tyre size: 385/65R22.5 * Rear axle tyre size: 315/80R22.5 * Fuel tank: 510 l * AdBlue tank: 60 l * Permissible gross weight: 26,000 kg * Curb weight: 13,630 kg * Permissible towing capacity: 35,000 kg * Overall length: 10,200 mm * Safety inspection due: 05/2026 -----Janzen System T19 tandem timber trailer (Vehicle Number: 11676) * 4 adjustable stanchions ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes * First registration: 01.11.2019 * Total length: 7,650 mm * Perm./tech. gross weight: 18,000/19,000 kg * Curb weight: 2,950 kg * Tyre size: 385/65R22.5 * MOT: 11/2026 * Safety inspection: Vehicle number: 11675+1167----Subject to errors and prior sale----Advertising and lettering have been digitally removed.----We are happy to assist you with all necessary formalities involved in the purchase of a vehicle. Simply let us know your requirements and suggestions and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/safety inspections * Complete export processing * Arrangement of financing * Application for export number plates * Vehicle transfer * Vehicle registration * Vehicle recovery and transport ----YOUR VTS TEAM