Used Lisec Float (Low-E) + Laminated Glass Cutting for sale (81,850)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, LiSEC – PKL, SBL, ATL, LBR, GFB-60/30 RE-S, VB-45 Chsdpsy Rulisfx Afgoc Float (Low-E) and Laminated Glass Cutting Line with mobile overhead crane (gantry) with rotating suction frame for automatic pick-up of large-sized glass sheets (jumbo) and automatically movable shelf rack storage systems (LBR). Construction year: 2008 Max. glass size: 6000 x 3210 mm In good condition. Inspection is possible by appointment. Available: NOW

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table. Codpfex Tq S Dex Afgshc

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Chodpjz Dhm Ujfx Afgoc

Condition: excellent (used), Year of construction: 2008, Laminated glass cutting line with low-e deletion Maximum laminated glass cutting length: 4600 mm Maximum laminated glass thickness: 8 + 4.56 PVB + 8 mm Tilting loading table with belts 100 BLC-J is included More technical information and layout can be found attached as Tech. data file Chodpfxjz Dv U Ho Afgjc Very good and clean condition Good working order As is Available immediately

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1303, total width: 4,400 mm, total length: 3,300 mm, total height: 1,700 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 3,210 mm, feed length Y-axis: 3,300 mm, cutting length (max.): 3,300 mm, We offer this Hegla VSG-M 33 MT laminated glass cutting table, which is in very good condition and was manufactured in 2005. Manufacturer: Hegla Model: VSG-M 33 MT Year of manufacture: 2005 Condition: very good ID Category: 518 ID Machine Type: 898 Type: laminated glass cutting table Chjdpfxez Hl T Rs Afgsc If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2005, Shape float glass cutting table with low-e deletion Maximum glass size: 6100 x 3300 mm "4 in 1" - with tilting, cutting, breaking and low-e deletion Glass thickness: 2 - 19 mm Overall dimensions: 7000 x 4000 mm More technical information can be found attached as Tech. data file In very good and clean condition Good working order, tested See video As is Cjdpfx Aezaz Uusfgjhc Available immediately

Condition: excellent (used), Year of construction: 2015, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested Chsdpoxlq Nwjfx Afgec As is See video Availability immediate

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total length: 11 mm, total width: 2,500 mm, total height: 3,500 mm, working height: 520 mm, input voltage: 400 V, overall weight: 6,000 kg, type of input current: three-phase, power: 60 kW (81.58 HP), Lisec glass washing machine VHW-25V8, year 2002, working direction left/right, with 8 brushes for low-e, including following: - inlet conveyor (3,3 m) maker MBR (Maschinenbau Radovanovic) - Glass washing machine VHW-25V8 - outlet conveyor (4,4 m), maker MBR - 2 hot water tanks - 2 sandfilter Chedpszq S A Nsfx Afgjc - 1 blower The machine is in very good working order and is available from current location in Germany by the end of October

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic tiltable float glass cutting table for half jumbo sizes workable dimension : 3760 x 2760 mm 5 tool store the pc is supplied complate with CR ROM drive , 3,5" modem and network card , color monitor and windows Cedpjz Imnfjfx Afgohc with straight and shaped optimisation possibl for vinyl cut and digitalization with laser for templates glass thikness : 3 - 19 mm acceleration speed : 150 m/min cutting tolerance : 0,15 mm breaking bars : 2 + 1 workable table height : 900 mm machines sizes : L x w x H = 6000 x 2275 x 2250 mm installed power : 5,6 Kw weight : 2500 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts Chedpfx Afeyh T Rujgoc - laminated glass cutting module with cutting length : 4600 mm 4 unloading arms new heating element from december 2025 min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos

Year of construction: 1998, condition: ready for operation (used), A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible. Cjdpfsy Eg A Nex Afgjhc

Condition: like new (used), Year of construction: 2010, In-line shape glass cutting table with low-e grinding LISEC GFB-70/33RE Year of production: 2010 Maximum glass size: 7000 x 3300 mm Low-e deletion Glass transportation by belts In very good and clean condition Availability immediate Cjdpfxjiv Siro Afgehc

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Chedjwplgbspfx Afgsc Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, LISEC, 2500 mm x 3500 mm Year of manufacture: 2013 The line is in continuous operation. Codpfezkugdex Afgehc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, total width: 7,500 mm, total length: 35,000 mm, overall weight: 32,000 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Lisec combination line for jumbo-sized sheets with automatic storage and loading table: Configuration: LBR - ATF - GFB RE S - LKT - BHK Chodpez Abahsfx Afgsc

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: GG65LC-13642, input voltage: 380 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 543LMT-J: PLF float glass cutting table with Low-e coating grinder LMT. SN: GG65LC-13642 (2600Kg-39.1A-10kA) from 2007. Bottero 352 BCS at the end of the cutting/grinding line as a break-out table. SN: GG60SB-3040 (2250Kg - 50Hz - 14.5kVA-380V) from 1995. Cedew I Dvkepfx Afgshc

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit in case of furnace overheating. * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. -Log of all operations and alarms. -Program < EASY MAINTENANCE > for vacuum pumps. -Delayed start of the process (for night use) -kW meter. Chedpfx Afoz Ihikogsc -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame.

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Chodpsw Tyk Iefx Afgoc

Condition: used, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic positioning stops for length adjustment • CNC control system with operator guidance via monitor • Integrated cutting plan display • 2 special cutting heads for laminated glass (VSG) cutting • Lower cutting head can be deactivated for float glass cutting • Automatic cutting oil supply for both upper and lower cutting heads • Cutting oil canister with fill level monitoring • Automatic breaking roller for opening the lower cut • Lowerable take-off table for opening the upper cut • Separation device with hold-downs, also suitable for LOW-E coated glasses Cjdpfx Aew Uptzjfgohc • Continuous special heating element beneath, swiveling • Thermal-mechanical separation device for dividing multiple interlayers • Cut line marking for diagonal cuts by visible laser • Glass flow direction: right to left • Maximum cutting length VSG: 3700 mm • Maximum glass size: 6100 mm x 3210 mm • VSG glass thickness: 2x3 to 2x8 mm • Interlayer thickness: 0.38 to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min • Cutting accuracy: +/- 0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm • Operator-side turning device • Price on request

Condition: good (used), Year of construction: 2007, functionality: fully functional, total width: 4,015 mm, total length: 13,640 mm, total height: 940 mm, overall weight: 8,300 kg, input current: 32 A, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, Project / Item: Used Hegla glass cutting line (year of manufacture 2007) Cjdpfx Ajz Apcwofgohc Hegla EcoLam 37 Plus: Laminated safety glass (LSG) cutting system with integrated loading arms. (2007) Hegla LT 2034: Fixed transport table for glass transfer within the cutting line. (2007) Hegla LKTR 7034: Combined transport and tilting table, equipped with air cushions and conveyor belts. (2007) 2. TECHNICAL SPECIFICATIONS OF THE SYSTEMS 2.1 Hegla EcoLam 37 Plus (LSG cutting system) - Equipment: Integrated loading arms for automatic/manual glass handling - Dimensions: Length: 3,280 mm | Width: 4,780 mm | Table width: 4,015 mm - Working height: 940 mm - Maximum glass dimensions: 6,100 mm x 3,210 mm - Maximum cutting length: 3,700 mm - Stop length: 160 mm to 2,000 mm - Cutting accuracy: +/- 0.5 mm - Weight: 4000 kg - Glass thickness (LSG): 2 x 3 mm to 2 x 8 mm - PVB film thickness: 0.38 mm to 3.8 mm - Connection values: 3 x 400 V / PE, 50 Hz | Power: 20 kW - Air pressure: 6 bar 2.2 Hegla LT 2034 (Transport table) - Function: Fixed station for intermediate transport - Dimensions: Length: 2,000 mm | Width: 3,400 mm - Working height: 3,400 mm - Weight: 800 kg - Maximum glass dimensions: 3,210 mm x 6,100 mm - Connection values: 3 x 400 V / PE, 50 Hz | Air pressure: 6 bar 2.3 Hegla LKTR 7034 (Transport and tilting table) - Function: Transport table with tilting function, integrated conveyor belts and air cushion system - Dimensions: Length: 7,000 mm | Width: 3,450 mm - Working height: 940 mm - Total weight: approx. 3,500 kg - Connection values: 400 V, 50 Hz | Power: 11 kW (according to layout drawing max. 17 kW / 45A) | Air pressure: 6 to 8 bar Total length of the core line: 13,640 mm - EcoLam area: 4,610 mm - LT area: 2,030 mm - LKTR area: 7,000 mm

Condition: good (used), Year of construction: 2007, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, Glass cutting line for split strips - consisting of: Glass Hegla Cutting Table OPTIMAX3323F 6372 2007 00305 Glass Hegla Glass loading Table BBS 3323 7176 2007 00306 Glass Hegla Breakout Table LKB 4230 15811 2007 00307 Chedsu S R Ilopfx Afgec 3 racks included , fencing included

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 510000087, BAVELLONI MTS 42 For sale: a well-maintained Bavelloni MTS42 glass cutting machine, boasting the renowned reliability and quality of Bavelloni. It is an ideal choice for glass processing workshops, ensuring precise and efficient operation. Key features: – Working dimensions: 3700x2750 mm – Thickness: 3-19 mm – Speed: 120 m/min – Power: 21 kW Chjdpfey D Eq Nsx Afgsc – Precision cutting head with adjustable cutting pressure – Stable, robust machine frame designed for a long service life – Easy-to-use control system – Suitable for fast and accurate series production – Well-maintained, ready for immediate use A reliable, industrial-grade machine designed for heavy-duty use, offering excellent value for money. For sale due to company closure! European installation can be arranged!

Condition: used, Year of construction: 2007, functionality: fully functional, input current: 73 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this used Glaston Bavelloni MTS64 glass cutting desk, year of construction 2007. Voltage: 400 V Phase: 3 Frequency: 50 Hz Power: 29 kW Current: 73 A If you have any questions or need more information, feel free to send us a message or give us a call. Cjdpfxsyzxf Ue Afgshc

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm Codpjx Eb Abofx Afgjhc - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine Cjdpfezut Axex Afgehc It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.