Used Lhs Bbt2 for sale (137)

Condition: good (used), Year of construction: 2002, Big Bag Traverse, Lifting Gear, Adjustable Traverse, Crane Traverse, Indoor Crane, Crane Hook Traverse, Load Traverse, Heavy-Duty Traverse -Crane traverse: Big Bag traverse -Dimensions: see photo technical drawing -Transport dimensions: 985/985/H250 mm Bodpjwrrkfofx Amrsln -Own weight: 38 kg

Condition: good (used), Year of construction: 1997, Lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist Bsdey D Hk Repfx Amreln -Manufacturer: LHS load handling equipment, compensating spreader beam for transporting different loads -Type: TIV 10-6 -Loading capacity: 10 t -Transport dimensions: 6030/410/H930 mm -Empty weight: 720 kg

Condition: good (used), machine/vehicle number: 0284, Year of construction: 2010, Offer 22650 Technical Specifications: - Load capacity 2100 t - Y span (width) 4.0 m - Y dimension (length) 3.5 m - 3 load hooks at the ends of the Y, each with a capacity of 1000 kg - Forklift entry pockets: W 500 x H 230 mm - Spreader beam dimensions approx.: L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Central spreader beam tube made of square tube 140 mm - Construction height approx. 510 mm - Transport dimensions: L 3.2 x W 2.1 x H 0.55 m Bodpfx Aew Rnzvjmrsln - Weight: 600 kg

Condition: like new (used), Heavy-duty shelving / pallet racking 4 bays each with 3 levels (plus base) Height: approx. 4.00 m Bodpfjz D Nhgsx Amrjln Length: approx. 11.00 m Scope of delivery: 5 upright frames (height: approx. 4.00 m each) 24 shelf beams (length: approx. 2.70 m each) 48 safety pins Inspection is possible by appointment at the warehouse in 46384 Raesfeld.

Condition: good (used), Big bag traverse, lifting sling, load traverse, heavy-duty traverse, cross traverse, H-traverse, lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist -Crane traverse: Traverse for reinforcing steel mesh or similar -Load capacity: 5 tons -Hook chain: Length 940 mm -Transport dimensions: 2920/2365/H540 mm Bsdpfx Amox Ngp Roroln -Empty weight: 315 kg

Condition: used, functionality: fully functional, Year of construction: 1987, Trailers with loading ramps for the transport of construction machinery and equipment. Special design: side-tipping. Bodpfx Amszb Nkgjrjln

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 650 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 500 mm, number of axes: 3, This 3-axis Wenzel LH 65 was manufactured in 2018. It features a measuring range of 650 × 750 × 500 mm and includes a Renishaw PH6M probe head with a TP200 probe. The machine is equipped with online temperature compensation and active vibration damping for enhanced precision. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 65 CMM machine we have for sale. Contact us for further details. Bledpfx Ajzt Nr Homrjn Technical Data • Measuring Range (X × Y × Z): 650 × 750 × 500 mm • Accuracy Standard: DIN EN ISO 10360 • Accuracy Class: Premium • Temperature Range: 18 °C – 22 °C • Maximum Temperature Gradient: 1 K/h • Maximum Temperature Gradient: 1 K/m • Maximum Temperature Gradient: 2 K/day • Probe Head: Renishaw PH6M • Probe: Renishaw TP200 • Probe Module: Standard Force (SF) • Probe Interface: PI200-3 • Probe Ball Diameter: Ø 4 mm • Probe Extension: 50 mm • Probe Extension: 100 mm • Adapter: PAA1 • PFTU, MPE: 1.6 µm • E0, MPE: 1.6 + L/350 µm (L in mm) • E150, MPE: 1.6 + L/350 µm (L in mm) • R0, MPL: 1.6 µm • Standard Module • Stylus: 4 ×

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included Bljdpfxoyr Aiwe Amron 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 3L3YF03390, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 262 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, This lot consists of six JUKI LH-series industrial twin-needle lockstitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI LH-3100 Series is one of the world's most widely used industrial twin-needle sewing platforms, renowned for exceptional reliability, precise parallel stitching and outstanding productivity in demanding garment manufacturing environments. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched production set with identical operating principles, common spare parts inventory and simplified maintenance. These machines are ideally suited for denim manufacturing, jeans assembly, workwear, uniforms, technical garments and other applications requiring strong, accurate parallel seams. Bundle Contents Machine 1 Model: JUKI LH-3188-7 Internal Reference: 3A-V256 Machine 2 Model: JUKI LH-3188-7 Year: 2004 Internal Reference: 7A-V257 Machine 3 Model: JUKI LH-3128-7 Year: 1998 Internal Reference: 37A-5470 Machine 4 Model: JUKI LH-3178-7 Year: 2008 Internal Reference: 32A-V459 Machine 5 Model: JUKI LH-3178-7 Year: 2002 Internal Reference: 28A-V249 Machine 6 Model: JUKI LH-3188-7 Internal Reference: 47A-K525 Technical Specifications Manufacturer: JUKI Corporation Model Series: LH-3128-7 / LH-3178-7 / LH-3188-7 Machine Type: Industrial Twin-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Twin-Needle Lockstitch System Bledpfx Aoznbtlsmron Vertical Hook System Automatic Lubrication Integrated Electronic Control System (-7 Models) Automatic Thread Trimmer Automatic Backtacking Automatic Needle Positioning Industrial Sewing Tables Heavy-Duty Steel Stands Production Benefits • Factory-matched production set • High-speed twin-needle sewing • Excellent seam consistency • Accurate parallel stitch formation • Reliable performance during continuous production • Reduced operator training requirements • Common spare parts across the production cell Why Purchase This Lot • Six professional JUKI twin-needle sewing machines • Matching machines from one factory • Shared maintenance procedures • Common spare parts inventory • Cost-effective production line expansion • Ideal for new or expanding garment factories • Excellent investment for denim and workwear manufacturers Applications • Jeans production • Denim manufacturing • Double-row topstitching • Waistband sewing • Pocket attachment • Decorative topstitching • Workwear manufacturing • Uniform production • Technical garments • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 2015, operating hours: 15,583 h, Equipment: ABS, LIEBHERR LH 22 M LITRONIC Blodpfx Ameycbb Horen Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? BETRIEBSSTD. 15 583 Std TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Bljdezv Utnjpfx Amron Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: excellent (used), functionality: fully functional, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 26,390 kg, drive condition: 75 %, Year of construction: 2023, operating hours: 2,360 h, Equipment: UVV, adjustable boom, gripper hydraulics, hammer hydraulics, Hyundai, Crawler Excavator, HX235ALCR ENGINE Cummins B6.7 / STAGE V Engine Power: 173 hp (129 kW) at 2,200 rpm HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power Modes, 2 Work Modes, User Mode Variable Power Control Electronic Pump Flow Control (EPFC) Flow control for attachment mode Idle Auto Function Automatic Engine Shutdown Electronic Fan Control CAB AND INTERIOR CAB ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12V power outlet (24 VDC to 12 VDC converter) Electric horn All-weather steel cab with 360° panoramic view Safety glass, toughened Windshield as a sliding window Sliding glass window (left) Lockable door Storage compartment and ashtray Bsdpfx Amozdrblsroln Transparent cab roof liner Sun visor Door and cab locks, one key Pilot-controlled joystick with pre-control pressure assist Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheater) CENTRAL MONITORING 8" LCD display Engine RPM or odometer/speedometer Engine coolant temperature gauge Maximum power Slow/fast travel speed Idle Auto Function Overload warning with alarm Engine check Air filter clogged Indicators ECO indicators Fuel level indicator Hydraulic oil temperature indicator Fuel preheater Warnings Communication error Low battery capacity Clock SEAT Mechanically suspended, heated driver's seat CAB WITH ROPS ROPS (Rollover Protective Structure) ISO 12117-2 SAFETY Work Mode Master switch, battery Rear-view camera Four front work lights (2 on the boom, 2 on the front frame) Driving alarm Electronic swing parking system Boom holding system Stick holding system Boom cylinder safety valve with overload warning device Two exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel pre-filter Self-diagnosis system Batteries (2 x 12 V × 100 Ah) Accumulator for lowering work equipment UNDERCARRAGE Lower frame cover (standard) Ground plates Triple-plate ground plates (600 mm) Track roller guides Boom 5650 mm (Variable length boom) Boom safety valves (Variable length boom) Stick 2920 mm Stick safety valve (on variable length boom) With bucket linkage Upper carriage for variable length boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for rotation function Lines for quick coupler Long crawler undercarriage with blade holder Ground plate 1 pedal (Variable length boom/2-way) Crawler tracks 600 mm (triple-plate) Front blade Reinforced lower frame plates 19 inch Kawasaki joysticks + EPFC Proportional joysticks Fine swing control Swing lock One-pedal straight-line travel system Air-suspended, heated seat SmartKey + button + auto shutdown Fuel filling pump Air compressor Hyundai HX paint With work light on the boom (LED) Work light at the front of the cab (LED) Work light at the rear (LED) All-around view monitor (AAVM) FOG protection (front and top) Laminated 7mm window glass Fuel preheater Central lubrication Beka (Variable length boom) (Europe) Hydraulic oil - VG46 Turbo II air precleaner Hydraulic quick coupler CW40 with LH, with one digging bucket

Year of construction: 2006, operating hours: 20,000 h, condition: used, functionality: fully functional, machine/vehicle number: 114058, Used Metla Toledo Safe Line Metal detector Used for 60,000 Buns per hour Taken out of commission in 2024 Air Reject system Reject Bin with Hood and sensor Belt Included Lh hand machine Bljdpfxey R S Ize Amron Rh Hand Machine

Condition: used, axle configuration: 2 axles, first registration: 02/1996, suspension: air, tire size: 265/70 R 19.5, wheelbase: 5,000 mm, Year of construction: 1996, = Additional Options and Accessories = - Air suspension = Additional Information = Axle configuration Tire size: 265/70 R 19.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Front axle: Dual tires; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Rear axle: Dual tires; Tire tread depth left inside: 65%; Tire tread depth left outside: 65%; Tire tread depth right inside: 65%; Tire tread depth right outside: 65% Weights Unladen weight: 4,600 kg Bodpfezvczgjx Amreln Payload: 15,400 kg GVWR: 20,000 kg Functional Loading platform height: 105 cm Condition Damage: none Identification License plate: WP-66-LH

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. Bljdpsy Dcivefx Amren PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 02/2009, total width: 2,550 mm, suspension: air, wheelbase: 5,570 mm, Year of construction: 2009, Cuppers 3-deck trailer 83-WD-LH 02-2009 BPW axles Automatic doors Swing floorboards Folding roof 3 decks Fans Remote control release = Further information = Suspension: Air suspension Blsdpfjywttxox Amrsn Front axle: Twin wheels; Max. axle load: 10,000 kg Rear axle: Twin wheels; Max. axle load: 10,000 kg Unladen weight: 6,520 kg Payload: 13,480 kg Gross vehicle weight: 20,000 kg Technical condition: good Visual condition: good Registration: 83-WD-LH

Condition: used, Year of construction: 2010, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, overall weight: 6,700 kg, Equipment: CE marking, Biesse Rover C 6.50 Config. 3 CNC machining centre 5-Axis Description Numerically controlled machining center ROVER C 6.50 Working fields - configuration 3 :X = 4600 mm; Y = 1535 mm; Z = 275 mm CE Safety devices 8 ATS panel supports - L = 152 5 mm - 32 sliding bases Automatic positioning of 8 panel supports and sliding bases (EPS X-Y ) Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas in X Blodpfx Amszqdmasron 8 rear reference stops with a stroke of 115 mm 8 Stops with a stroke of 140 mm positioned at 1175 mm (L= 12 80 - 1525 - 1800 mm) 4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system. 4 removable central stops with a stroke of 140 mm (2 Lh + 2 Rh) incl. of the pneumatic system Sensor for the detection of lowered stops Pneumatic system for lifting bar supports with double pneumatic stroke 6 lifting bar supports with double pneumatic stroke (H=74mm)uniclamps Vacuum system for a 250 m3/h pump 1 x 250 m3/h rotary veins vacuum pump for standard vacuum system Composition C3-A1 Operating unit with 5 interpolating axes Prearrangement for the assembly of chip deflectors with pneumatic or inductive sensor on a 5-axes operating unit Composition C3-P2 Chain tool changer with 33 places at 120 mm center distance Iron gripper on chain toolchanger for chip deflector compatible with 5-axes electrospindle RH Chip deflector for 5-axes operating unit Liquid cooling unit for liquid cooled systems Automatic lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: T/MS21-850125096, total length: 2,000 mm, input voltage: 240 V, track width: 900 mm, pressure: 7 bar, We have 2 off Ceia Metal detectors with full air reject systems , Excellent condition only used for 3 months Bodoy R S Tdopfx Amroln Did 65,00 Buns per hour Fully tested and ready to go in perfect condtion Lockable reject box Last Calibrated till Dec 2025 All passwords and manuals Lh / Rh Unit Please contact for Price and more information .

Condition: used, Year of construction: 2023, New demonstration machine! List price: €93,317 net. Basic machine complete in standard configuration for drilling and grooving: Detailed technical data can be found in the data sheet for ProTec Type 0571. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4-axis drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Milling unit Profit HSK63F with 3-position magazine for automatic tool changing, motor 5.5 kW (S1), 1000-20000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connection power 12 kVA, rated current 17.5 A, fuse 32 A, voltage 400 V, 50 Hz, 3 phases (without transformer). Power supply system TN or TT. Pneumatics connection 7 bar (102 psi). On the machine: coupling connector (quick coupling) ¼, DN7.2, brass, factory side. To the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, hose inner diameter 12 mm (min.). Compressed air requirement: continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection: 3x extraction nozzle dia. 80 mm. Extraction speed 30 m/sec - measured at the extraction nozzle. Extraction requirement: min. approx. 2500 m3/h min. Machine weight approx. 1650 kg (with options!). Machine installation location: In principle, a ProTec can be fixed to the floor with screws. A concrete floor (or foundation) is assumed (at least at the 4 machine edges/machine feet). Equipment: ProTec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for the front of the machine, width 500 mm. Roller table 765 mm (Y-axis), foldable, for the back of the machine, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device via slat curtain. Requirement for horizontal milling for Lamello P-system (without tools for Lamello P-system). Drill set for ProTec shaft ø 10 mm with clamping surface (JSO): 1 HW roofing drill 5x70mm (cutting depth 35mm), LH # 30566-5-05035-L3. 1 HW dowel drill 5x70mm (cutting depth 35mm), RH #30540-5-05035-R4. 1 HW dowel drill 5x70mm (cutting depth 35mm), LH #30540-5-05035-L3. 1 HW dowel drill 8x70mm (cutting depth 35mm), RH #30540-5-08035-R. 1 HW dowel drill 8x70mm (cutting depth 35mm), LH #30540-5-08035-L2. 1 HW dowel drill 10x70mm (cutting depth 35mm), LH #30540-5-10035-L1. 1 HW countersink drill 15x70mm (cutting depth 35mm), LH #30300-5-15070-L1. 1 HW countersink drill 20x70mm (cutting depth 35mm), RH #30300-5-20070-R1. 1 HW countersink drill 35x70mm (cutting depth 35mm), RH #30300-5-35070-R. 1 HW grooving cutter ø 125/30 mm, grooving cutter width (SB) 4.0 mm, Z=12, LH, Leitz. Only for chipboard and MDF, solid wood on request and by agreement. Tool holder HSK63 F, 3.0 pcs. For collet 462E/OZ25. Collet 462E/OZ25 for shank 25 mm, 3.0 pcs. Carbide shaft cutter Z1+1, 1.0 pcs. with WP drill cutter ø20, S25, LH 120, L2/L3 58 mm. Grooving cutter HW indexable insert Bsdew Tfzfspfx Amrsln

Condition: excellent (used), power: 190 kW (258.33 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 10,650 h, Year of manufacture: 2017 Drive: Wheeled Number of cylinders: 4 Unladen weight: 65,000 kg Superstructure brand: LIEBHERR LH 60 M LITRONIC CE marking: yes Technical condition: very good Optical condition: very good LIEBHERR LH 60 M LITRONIC MATERIAL HANDLER – YEAR OF MANUFACTURE 2017 – 20 M REACH For sale is a powerful and excellently equipped Liebherr LH 60 M Litronic material handler from 2017, ready for immediate use in scrap, recycling, port, and bulk material handling. This reliable machine offers an impressive reach of 20 meters and is powered by a powerful Liebherr D944 A7-04 engine with 190 kW (258 hp). The robust undercarriage with 4-point support provides maximum stability, while the hydraulically elevating cab ensures excellent all-round visibility and high operating comfort. Equipped with an industrial straight boom Z1 of 9.10 m and an industrial, heavily angled stick of 6.80 m, this machine is ideal for demanding handling operations. Includes a 5-tine grapple and a multi-shell grapple with a capacity of 1.10 to 1.70 m³. Blodpezdb Dqjfx Amren Technical data Manufacturer / Model: Liebherr LH 60 M Litronic Year of manufacture: 2017 Operating weight: 65,000 kg Reach: 20.0 m CE certified Engine: Liebherr D944 A7-04 Power: 190 kW / 258 hp Wheelbase: 3.40 m Ground clearance: 47.5 cm Undercarriage width: 3.53 m 4-point support Hydraulically elevating cab and 4th hydraulic function Industrial straight boom Z1 – 9.10 m Industrial, heavily angled stick – 6.80 m 5-tine grapple Multi-shell grapple 1.10 – 1.70 m³ Highlights ✔ 20-meter working reach ✔ Powerful and reliable Liebherr engine ✔ Hydraulically elevating cab for optimal visibility ✔ Including grapple equipment ✔ CE-certified machine ✔ Stable 4-point support ✔ Ready for immediate use ✔ Ideal for scrap, recycling, port, and bulk material handling Ready for Immediate Use The machine is in good working condition and ready for immediate use. For further information, photos, or to arrange a viewing, please do not hesitate to contact us. We speak German We speak English Hablamos Español

Condition: used, functionality: fully functional, mileage: 320,907 km, power: 338 kW (459.55 HP), first registration: 09/2022, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Blodpfez Ifbwex Amron Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 7 mm Rear left outer - 7 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Probe changer: -- Controller: Pantec Eagle Software: CMM Manager Lite 2024 Bljdpfsipq I Ijx Amrjn Year of construction: 2001 Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled;

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Bedpfx Aexuad Aemrsln Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Bodoy Uvfrjpfx Amreln Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: black, driver cabin: other, gearing type: other, Year of construction: 2006, Vehicle location: Bovenden, Bodywork: Hiab Multilift LHS 26256 hooklift system for containers up to 6.5m, dismantled from Daimler-Benz Actros 2541 L 6x2 with a 4500mm wheelbase! ACCESSORY SPECIFICATIONS WITHOUT WARRANTY, subject to changes, prior sale, and errors! Bjdpfoyg N Ucex Amreln