Used Lenze Component for sale (8,309)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. Nlodpszy Ndcsfx Af Seg 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Nsdpfxszy Hhxs Af Solg Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, Lenze Bachhofen AG, drive technology TYPE: MDFQABS100-22 Nsdpjzxbh Defx Af Selg 100 Hz 20.6 kW 2930 rpm Completely overhauled in 2023 See images.

Condition: used, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), overall weight: 30,000 kg, We offer a wide selection of used geared motors from conveyor systems for sale. Available manufacturers include: SEW NORD Siemens Lenze Demag Technical data: Power: from 0.55 kW to 2.2 kW Stock: over 1,600 units Total weight: approx. 30 tons Thanks to the large number of units, you are likely to find the right geared motor for your needs. Upon request, we will gladly send you a detailed Excel list with the available models and technical data. Large quantities available immediately Sales preferably as a complete package Price per unit: 100 to 150 € net (depending on the model and condition) If you are interested, we look forward to receiving your inquiry. Nlodpfx Afey Tg Sao Ssg Please note that unrealistic price offers will not be answered.

Condition: used, Year of construction: 2010, machine/vehicle number: 2067, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: AC, total height: 2,000 mm, total length: 1,500 mm, total width: 2,000 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, TARTLER NODOPUR VS-AR-2K – 2-Component Metering and Mixing System – Year of Manufacture 2010 – For sale is a used 2-component metering and mixing system, TARTLER NODOPUR VS-AR-2K. It was used in an industrial setting and shows corresponding signs of wear. Technical data: • Manufacturer: Ing. Büro Tartler GmbH / TARTLER • Type: NODOPUR VS-AR-2K • Machine No.: 2067 • Year of Manufacture: 2010 • Operating Voltage: 400 V AC • Frequency / Current Consumption: 50 Hz / 20 A • Power according to nameplate: 6.5 kW • Operating Pressure according to nameplate: 6–8 • Dimensions: approx. 1,500 × 2,000 × 2,000 mm incl. refill system • Weight: approx. 750 kg, depending on the equipment Control / Drive • Siemens PLC / SIMATIC Panel MP377 • Frequency Inverter A/B: Lenze, 1.50 kW • Drive Motor A/B: 1.50 kW Nsdpfozvmihsx Af Solg • Mixing Head Type: LC 6/3 • Electric Motor Mixing Head: Emod, 1.1 kW Metering Technology Component A • Metering Pump: KTS 32 • Delivery Volume: 32 cm³ / 30 ccm/stroke • Volumetric Meter: VSI 0.1/16 EPC S4V Component B • Metering Pump: FPN 16.0 • Delivery Volume: 16 cm³ / 16 ccm/stroke • Volumetric Meter: VSI 0.2/16 EPO 12 V Containers / Material Supply • 1 × Stainless Steel Container A, approx. 60 liters • 1 × Stainless Steel Container B, approx. 60 liters • Containers with Mini-/Maxi-Level Monitoring • Container Pre-Pressurization • Silica Gel Filter • Container Agitator • Automatic Refill from 200-Liter Containers • Diaphragm Pumps for Component A and B Hose Assembly • Component A: approx. 6.12 m / DN 16 • Component B: approx. 6.42 m / DN 10 Equipment: The equipment includes, among other things: • Metering and mixing system for two components • Mixing head • Siemens control panel • Metering pumps A and B • Volume flow measurement • Stainless steel material containers • Agitators • Automatic refill system • Diaphragm pumps • Hose package • Signal light / Traffic light • Control cabinet • Various sensors and pressure regulators Condition: The system is in used condition. Age- and use-related signs of wear as well as material residues are present. The optical condition can be clearly seen in the current photos. An inspection of the system is possible after prior appointment. A function test can also be carried out after consultation. Sale: Price: €17,500 (negotiable) plus VAT. Inspection and collection by appointment. Sale preferably to commercial businesses. If you are interested or have technical questions, we will be happy to send you further pictures and information.

Condition: good (used), Year of construction: 2019, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current power supply, power supply module, power supply module, servo converter, servo converter Nedpexm Tauofx Af Solg -Manufacturer: Lenze, L-force Multi Drive HighLine servo inverter -Type: E94AMHE0044 -Expansion modules: E94EYAB / E94AYM43 / E94AYFLF / E94AYCER -Number: 9x inverters available -Price: per piece -Dimensions: 460/60/H290 mm -Weight: 4.0 kg/piece

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, type of input current: three-phase, input voltage: 380 V, total length: 1,800 mm, total width: 1,500 mm, total height: 2,550 mm, inner diameter: 320 mm, workpiece height (max.): 75 mm, grinding wheel diameter: 720 mm, overall weight: 2,800 kg, input frequency: 50 Hz, Equipment: documentation/manual, 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine Used 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine for Sale – 720mm Grinding Wheels – 6 Carriers – Siemens SIMATIC Touch Control – Coolant Filtration System Nljdsz E A Icopfx Af Sjg Manufacturer: Lapmaster International Model: DSG 720 Machine Type: Double Side Fine Grinding Machine Year: 2014 Control: Siemens SIMATIC Touch Control Condition: In storage, Functional but top grinding plate damaged. Machine Description The Lapmaster DSG720 is a precision double-sided fine grinding machine designed to process both parallel faces of components simultaneously. This type of machine is suited to applications requiring close control of flatness, parallelism, thickness and surface finish. This machine is equipped with 720mm outside-diameter grinding wheels, a 6-carrier workholding system, independently controlled upper and lower grinding wheel speeds and a Siemens SIMATIC touchscreen control. Important Condition Note The top grinding plate / upper grinding wheel assembly is damaged and requires replacement. The machine is therefore being offered with this known defect clearly disclosed. Prospective purchasers should allow for the replacement of the top grinding plate before returning the machine to normal production use. Main Specifications Manufacturer: Lapmaster International Model: DSG 720 Year: 2014 Machine Type: Double Side Fine Grinding Machine / Double-Sided Grinding Machine Grinding System Grinding Wheel Outside Diameter: Approx. 720mm Grinding Wheel Inside Diameter: Approx. 320mm Wheel Size: Ø720 x Ø320mm Number of Workpiece Carriers: 6 Upper Grinding Wheel Speed: 0–130 rpm Lower Grinding Wheel Speed: 0–130 rpm Inner Pin Ring Speed: 0–100 rpm The double-sided grinding arrangement allows both sides of suitable components to be processed simultaneously, helping achieve consistent component thickness and parallelism. Electrical Specifications Operating Voltage: AC 380V, 3 Phase Frequency: 50Hz Installed Power: Approx. 18kW Current: Approx. 50A Pneumatic Requirements Normal Air Supply: Approx. 5–6 kg/cm² / 0.5–0.6MPa Minimum Working Pressure: Approx. 4 kg/cm² / 0.4MPa Siemens SIMATIC Touchscreen Control: The machine is equipped with a Siemens SIMATIC touchscreen operator control. Coolant Filtration System Included: The Lapmaster DSG 720 is supplied with a separate coolant filtration system. Approximate Machine Dimensions Machine Width: Approx. 1,800mm Machine Depth: Approx. 1,500mm Machine Height: Approx. 2,550mm Net Machine Weight: Approx. 2,800kg Key Features 2014 machine Lapmaster International DSG 720 Double-sided fine grinding process Ø720mm outer-diameter grinding wheels Ø320mm grinding wheel inner diameter 6 workpiece carriers Upper wheel speed 0–130 rpm Lower wheel speed 0–130 rpm Inner pin ring speed 0–100 rpm Siemens SIMATIC touchscreen control Separate coolant filtration system Feed Tables Included 18kW installed power 380V, 3-phase, 50Hz Approx. 2,800kg machine weight Precision simultaneous grinding of both component faces Please Note: All specifications, dimensions, capacities and machine details quoted above are approximate and are provided for guidance only. Prospective purchasers should verify all important specifications, machine condition, tooling requirements and operating requirements prior to purchase.

Condition: good (used), Year of construction: 2017, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current power supply, power supply module, power supply module -Manufacturer: Lenze, L-force Power Supply Module power supply module -Type: E94APNE1004 Nlsdpjxm S I Refx Af Ssg -Dimensions: 510/210/H290 mm -Weight: 13.6 kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2.7552.069, wire diameter (max.): 6 mm, power of the servo motor: 10,000 W, input voltage: 400 V, type of input current: three-phase, We are offering this very well-maintained Wafios BM 3 wire bending machine, manufactured in 1998, for sale. Nodpfx Afozvdd Aj Sslg Tool set for 3 - 6 mm wire is included. Complete documentation is available. The PC has already been replaced. We mainly produced 3D parts from 3 mm wire – brochure holders in all variations. Everyone knows what happens when you maintain the speed after the third bend... distortion. Therefore, this machine operated at a maximum speed of 15%. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, total height: 2,410 mm, total width: 2,110 mm, total length: 2,334 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 310,660 mm, table length: 700 mm, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 380 mm, input voltage: 415 V, overall weight: 2,500 kg, table load: 800 kg, input frequency: 50 Hz, tank capacity: 450 l, Equipment: documentation/manual, 2023 Excetek ED400C CNC Die Sink EDM Machine Used 2023 Excetek ED400C CNC Die Sink EDM Machine for Sale – C-Axis – EROWA 4-Station Automatic Tool Changer – Spinflo Oil Cooler – Magnetic Chuck – ViTiny Digital Microscope Manufacturer: Excetek Model: ED400C Machine Type: CNC Die Sink EDM / Sinker EDM / Spark Erosion Machine Year: 2023 Condition: Excellent Machine Description Modern 2023 Excetek ED400C CNC Die Sink EDM machine available for sale with an excellent specification and useful additional tooling and accessories. The Excetek ED400C is a compact CNC spark erosion / sinker EDM designed for accurate machining of complex cavities, moulds, dies, precision components and difficult-to-machine conductive materials. This machine is particularly well equipped and includes a C-axis, EROWA tooling, 4-station automatic EROWA tool changer, 600 x 200mm magnetic chuck, Spinflo ECEA oil cooler and ViTiny digital microscope with display screen. Main Machine Specification X-axis Travel: 400mm Y-axis Travel: 300mm Z-axis Travel: 350mm Worktable Size: 700 x 400mm Maximum Workpiece Size: 850 x 850 x 380mm Maximum Workpiece Weight: 800kg Maximum Electrode Weight: 120kg Electrode Head to Worktable Distance: 310–660mm Approx. Machine Dimensions: 2,334 x 2,110 x 2,410mm Machine Weight: Approx. 2,500kg Dielectric Oil Filtration System The ED400C is supplied with an integrated oil filtration arrangement. Oil filter tank capacity: Approx. 450 litres Paper filters: 3 A clean and stable dielectric oil system is important for maintaining consistent EDM performance, flushing efficiency and surface finish during spark erosion operations. Spinflo ECEA Oil Cooler The machine includes a Spinflo ECEA oil cooler / dielectric chiller. C-Axis The ED400C is equipped with a C-axis, allowing controlled rotary positioning of the electrode. EROWA 4-Station Automatic Tool Changer The machine is fitted with a 4-position automatic EROWA tool changer. This enables several electrodes to be loaded and automatically changed during a machining cycle, helping increase unattended machining capability and reducing operator intervention The machine also includes EROWA tooling, providing a recognised precision electrode holding and referencing system. 600 x 200mm Magnetic Chuck Included with the machine is a: 600 x 200mm magnetic chuck This provides an additional workholding option for suitable ferrous components and adds to the versatility of the machine for general precision EDM work. ViTiny Digital Microscope & Screen The machine also includes a ViTiny digital microscope with separate display screen. A digital microscope is particularly useful for close inspection of electrodes, fine features and machined surfaces and can assist with setup, inspection and process verification. Nsdpfx Afjz E A Hxe Sjlg Key Equipment Included Excetek ED400C CNC die-sink EDM C-axis EROWA tooling 4-station automatic EROWA tool changer Spinflo ECEA dielectric oil cooler 600 x 200mm magnetic chuck ViTiny digital microscope ViTiny display screen Integrated dielectric filtration system Approx. 450-litre oil tank 3 paper filters CNC control and EDM generator Please Note: All specifications, dimensions, capacities, accessories and machine details quoted above are approximate and are provided for guidance only.

Condition: excellent (used), WEISS SWT 600/800 Spray and Splash Water Test System IPX3 IPX4 Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800 Machine Type: Spray and Splash Water Test System Operating Hours: approx. 755.9 h according to the display For sale is a used WEISS SWT 600/800 spray and splash water test system for reproducible testing of enclosures, electrical products, components, and assemblies against penetrating water. The test specimen is positioned on the rotating table in the stainless steel test chamber. A pivoting tube with several spray nozzles moves around the test specimen and subjects it to water from alternating directions. Water flow rate and test duration can be adjusted and monitored via the integrated control system. Technical Data: Test medium: Water Test system: Pivoting tube / Rotating table Ingress Protection (IP) tests: IPX3 / IPX4 according to DIN EN 60529 Pivoting angle: adjustable Pivoting speed: approx. 60°/s according to series documentation Test specimen table: rotatable / height-adjustable Operating modes: Manual / Automatic Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 0.6 kW Rated current: 6.0 A CE marking available Water connections: Water inlet: max. 6 bar Water outlet: without back pressure Adjustable water flow rate Flow meter Regulating valve Manometer Control / Equipment: Touch operating panel Program editor / adjustable test time Operating hours, status and alarm display Stainless steel test chamber Large transparent test chamber door Pivoting tube with spray nozzles Rotating table / Test specimen table Height-adjustable test specimen holder Water inlet and outlet Side-mounted control cabinet Siemens SITOP power supply Lenze drive component Nsdpfxezzk Tbs Af Sjlg Expansion options: With appropriate additional equipment, further IP tests are possible with the SWT series, e.g., IPX1 / IPX2, IPX4K, IPX5 / IPX6 and IPX9K. The additional test equipment or high-pressure units required for this are not included in the scope of supply for this offer. Application areas: Spray and splash water testing IP protection testing Electronics and electrical components Automotive components Sensors and control units Enclosures and luminaires Quality assurance Development and testing laboratories Dimensions / Transport data: Test chamber (L × W × H): approx. 2,350 × 2,400 × 2,650 mm Without hinges / door locking: approx. 2,350 × 2,400 × 1,850 mm Weight of test chamber: approx. 650 kg Transport by forwarding agent Condition: Used Operating hours: approx. 755.9 h Optical condition according to the pictures. Scope of delivery: WEISS SWT 600/800 Spray and Splash Water Test System Pivoting tube spray device Rotating table / Test specimen table Touch control Side-mounted control cabinet Equipment according to the pictures Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, operating hours: 10,000 h, machine/vehicle number: 3936990, Equipment: all wheel drive, compressor, emergency stop, hydraulics, Complete MacFab Wet-Cast Concrete Panel Production Line and 29 steel moulds. Comprehensive Mould Package for the production of concrete sectional garages. Alternatively the moulds could be altered to produce products in a variety of sizes, shapes, textures and colours. Excellent / In Perfect Working order In daily operational use. Available for live operational viewings. Nlodpfxezndcco Af Seg Location: United Kingdom Terms: Ex Works (EXW) – Buyer to arrange decommissioning and transport. Overview, An exceptional opportunity to acquire a complete, turnkey precast concrete panel manufacturing setup from industry-leading manufacturer MacFab. This system is not sitting in storage; it is currently in day-to-day production, meticulously maintained, and performing to perfect operational standards. Ideal for an established precast yard looking to rapidly scale capacity, or an agricultural/civil contractor looking to bring high-volume panel manufacturing in-house without the long lead times of ordering new plant equipment. Fully operational hydraulic systems, premium vibration consolidation setup, and robust chassis engineering. Regularly serviced and completely reliable. 29 Heavy-Duty Steel Moulds Included: A massive inventory of robust commercial steel panel moulds engineered for high-cycle wet-cast production. Excellent face-side finish quality and squareness. Complete Turnkey Solution: Includes all necessary integrated controls and ancillaries to begin pouring immediately upon reassembly Zero Operational Risk: Buy with 100% confidence. Because the machine is in active use, buyers can verify hydraulic integrity, vibration consistency, and overall cycle efficiency first-hand. Massive Mould 29 commercial steel moulds independently represents substantial capital expense and manufacturing lead time. This package provides immediate scaling capability. Live Video / Inspections Available: Serious buyers are invited to visit the facility to see the machinery running in real-time. PRICE £59950.00 Plus VAT 70270 Euros (Open to sensible offers for a swift transaction) Sold Ex Works (EXW).

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2413, rotational speed (min.): 3,510 rpm, input voltage: 390 V, input current: 29 A, type of input current: three-phase, overall weight: 115 kg, torque: 36 Nm, type of cooling: air, protection type (IP code): IP54, This advertisement concerns: Nsdpszqx E Djfx Af Sslg - 1 Lenze asynchronous servo motor, model MCA19S35-SRMP2, new and never used; - 1 Lenze asynchronous servo motor, model MCA19S35-RS0P1-Z0G0-STBF1, new and never used.

Condition: ready for operation (used), Lenze MCA 10I40-RS0B0-n14N-ST5S00N-R0SU servo motor. 15548938, serial number 1554893810000173329586, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Njdjzz Epkjpfx Af Selg

Condition: good (used), Includes control module E82ZBC Input: 1(3) /N/PE AC 230/240 V, 3.0 A (3.9 A) Output: 3/PE AC 0–230/240 V / 3.0 A / 0.55 kW 0.75 hp / 0–650 Hz ID No.: 13435850 Serial No.: 0025 Application: Drive control Njdpfx Aozc Hx Rjf Selg Width: 60 mm Height: 220 mm Depth: 140 mm Weight: 1132 g Condition: good, second-hand

Condition: good (used), D No. 13015956 / Serial No. 000038 Input: 3-phase SC 400/480V 7.0A 5.8 kVA 50/60Hz Output: 3-phase AC 0/480V 7.0A 5.8 kVA 0-480Hz Application: Drive control Width: 98 mm Height: 350 mm Depth: 250 mm Weight: 4.9 kg Condition: good, second-hand Nedpfx Afjy Tufho Sjlg

Condition: used, Der Frequenzumrichter ist für eine Falzmaschine Heidelberg TH/KH 66 - 78 - 82 programmiert und getestet. The frequency converter is programmed and tested for a Folding machine Heidelberg TH/KH 66 - 78 - 82. Nljdpfx Asxvduhsf Ssg Frequenzumrichter / Inverter Lenze 8200 Vector for Heidelberg TH / KH 66 - 78/82 Prod.-No. Serial-No. 0031 Output 7,0 A, 1,5kW / 2.0hp, 0-650Hz Der Frequenzumrichter ist für eine Falzmaschine Heidelberg TH/KH 66 - 78 - 82 programmiert und getestet. The frequency converter is programmed and tested for a Folding machine Heidelberg TH/KH 66 - 78 - 82. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm Nsdpjrr Smlefx Af Sjlg - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 001, We offer for sale a custom-built automatic cutting machine AMT Plus PVA, designed for high-volume production of short wooden components from pre-machined timber profiles and square sections. The machine automatically feeds, positions, clamps and cuts workpieces according to preset dimensions, ensuring high productivity and repeatability. Technical Specifications Manufacturer: AMT Plus s.r.o. Model: PVA Year of manufacture: 2018 Nljdpfjzyrdlox Af Ssg Workpiece dimensions: Min.: 12 × 40 × 300 mm Max.: 70 × 160 × 800 mm Installed power: 40 kVA Power supply: 400 V / 50 Hz Air pressure: 0.6 MPa Air consumption: approx. 4.5 m³/h Features Servo-controlled positioning system Frequency-controlled saw drive Pneumatic clamping Multi-blade cutting unit Integrated waste conveyor Fully enclosed safety guarding with dust extraction connections Dimensions Approx. 3500 × 1320 × 2140 mm Condition Fully functional Good technical condition Available for inspection and testing Applications Ideal for the production of: furniture components hardwood blocks flooring elements window and door components other precision-cut wooden parts Sale Terms Available immediately Dismantling and transport to be arranged by the buyer Custom-built machine originally developed for accurate cutting of short wooden components in serial production.

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm Nljdpfxji Exp Eo Af Sjg -Weight: 332 kg

Condition: used, Year of construction: 2009, operating hours: 67,500 h, functionality: fully functional, machine/vehicle number: 2.7681.023, For sale: WAFIOS BMZ 42 CNC tube bending machine, year 2009. We are offering a CNC tube bending machine from the premium manufacturer WAFIOS, model BMZ 42. The machine has been used in production and is suitable for the precise, serial production of bent wire and tube components. Technical data: manufacturer WAFIOS, type BMZ 42, year of construction 2009, serial number 2.7681.023, operating hours approximately 67,500 h, location: Northern Italy, province of Bolzano. The machine has a robust construction and is currently still in operation and used for complex tube applications in the automotive industry. The machine is sold complete with protective casing. Used condition, machine in production, further details on condition and accessories available upon request. Machine supplied as inspected, including available documentation. Inspection possible by appointment, loading assistance provided. If interested, please contact us. Price negotiable. Nlsdpfx Aezb U Tgsf Ssg

Condition: good (used), Input: 3 / PEAC 400/480V 12.0A, 10.0kVA, 50/60Hz Output: 3 / PEAC 0-480V 13.0A, 10.8kVA, 0-480Hz ID no.: 13180666 Serial no.: 000010 Width: 135 mm Height: 350 mm Depth: 250 mm Weight: 6600 g Nodpfx Afeyrq Ibo Sjlg Condition: Good, second-hand

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Turning- and Milling Center - Universal | Brand: DMG MORI | Type: CLX 450 TC Year of manufacture: 2024 Nlsdpfx Afsz E A Uio Seg B-axis factor – added value compared to any turret lathe: * Shortest set-up times thanks to automatic tool change with 60 tools * Eliminates the need for angle tools: B-axis with a swivel angle of +/-120° and 0.001° resolution Complete 6-side machining via main and counter spindles: * Maximum positioning accuracy and performance thanks to integrated spindle drives up to 5,000 rpm and 345 Nm, as well as an integrated C-axis (0.001°) * No driven toolholders required, thanks to the compactMASTER with 12.000 rpm and 90 Nm * Generous working area for components up to Ø 400 mm x 1.100 mm Operating hours (September 2026): - Operating hours: 4.351 h - Spindle hours: 1.967 h The machine can be inspected under power by prior appointment. Condition: As good as new / ready for operation. TECHNICAL SPECIFICATIONS: Working area Max. travel on X-axis: 750 mm Max. travel on Y-axis: 200 mm Max. travel on Z-axis: 1.100 mm Workpiece Max. workpiece diameter: 400 mm Max. workpiece length: 1.100 mm Max. bar passage: 77 mm Main spindle as an integrated spindle motor Dynamic dual-pressure clamping Tailstock function for the sub-spindle Multi-thread cycle 2.0 EQUIPMENT: - Control system: SINUMERIK 840D sl Operate - 60-position chain magazine - Chip conveyor - Documentation - CE marking - A wide range of additional features ... Robo2Go loading and unloading system, offering flexibility with a 6-axis industrial robot. No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on features are available upon request.

Condition: excellent (used), Year of construction: 2019, Servo motor, geared motor, electric motor -Manufacturer: Lenze, servo motor with gearbox -Speed: 144.0 rpm Nledpext D Trjfx Af Seg -Engine: Type MCA 10140-RS0B0 -Voltage: 390 V / 140 Hz -Power: 0.80 kW -Transmission: Type G50BH114MVAR2C00 i=27.415 -Shaft: Ø 25 x 50 mm -Number: 3x geared motors available Price: per piece -Dimensions: 455/145/H155 mm -Weight: 11.1 kg/pc.

Condition: used, PDF listing included! Extensive spare parts package – HOMAG / Homatic / Industrial Electronics For sale is a comprehensive collection of industrial and machine spare parts, primarily from the HOMAG / Homatic range, supplemented by components from Josting, Ferrocontrol, Heesemann/Kuhnke, Vero, Lenze, Brandt, Kuper and other manufacturers. The package comprises a total of over 500 individual items, offering an interesting selection of spare parts, modules and electronic components – particularly for the maintenance, repair and spare parts supply of older machines and control systems. Included are, among others: HOMAG / Homatic input and output cards PLC controllers and CPU cards PLC and program memory / EPROMs / flash modules Mini controllers and axis processors Servo and axis processors Frequency inverters / converters Encoder drivers Time and counter cards PC control units Control panels, keyboards and terminals VME bus and interface cards Power supplies and DC/DC converters Adapter and graphics modules various machine spare parts and circuit boards components from the Ferrocontrol / Josting range additional modules for HOMAG, Brandt and Heesemann machines Nlsdpfxezw N Sbo Af Sog The collection is particularly interesting due to the large number of different modules and the partially multiple availability of spare parts. It also includes many older or currently difficult-to-source components, which may be of interest for the repair and continued operation of the corresponding machines. Some of the included part numbers / modules: HOMAG / Homatic 2-083-01-5403/04 – 16 × 24 V output card 2-083-01-5406 – Homatic 16 × 24 V output card 2-083-01-5407 – 24 V NPN HC020 FET output card 2-083-01-5408 – 16 × 24 V output card 2-083-01-5101 – 16E 24 V input card 2-083-01-5105 – 32 × 24 V input card, PNP 2-083-01-5423 – Input/Output card HC010 2-083-01-5004 – CPU transfer RAM / auxiliary memory 2-083-01-6902 – PC control unit 2-083-02-7006 – Axis processor 6809 2-083-02-7010 – Encoder driver 2-083-02-7420 / 7421 – Conversion processors 2-083-02-8000 – Axis processor for 6 axes 2-083-02-8068 – Servo 4-axis 2-083-03-0046 – CPU30 E16-103 2-083-03-0202 – SECO 6×RS232 VME bus and numerous other Homatic modules and control components. Josting / Ferrocontrol Input-80 0990 0741 – Input cards Output-80T 09900762 – Output cards Ferrocontrol ORE-80 circuit boards E² PRGR 0990 0591 EFR 0990690 other control and electronics modules Heesemann / Kuhnke various input and output cards Delay cards CPU cards Power supplies and other machine components Power supplies / power units Vero Monovolt PK60 Vero Trivolt HOMAG / Homatic 5 V / 12 A or 20 A power supplies Schroff Switchpac-Triple power supplies Condition The parts come from an extensive spare parts stock. The condition and functionality may vary depending on the item. A complete technical inspection of all individual parts has not been carried out. The existing list with 513 items can be provided upon request. Due to the large quantity, the collection is preferably offered as a complete package. If you are seriously interested, further information, photos and the complete item list can be provided.