Used Leistritz Twin-Screw Extruder, Pelletizing System for sale (44,434)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. Hedpfx Aoznkx Doitonu The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,000 h, machine/vehicle number: 90201097-0010/2003, screw conveyor diameter: 44 mm, screw conveyor length: 2,420 mm, For sale is a twin-screw extruder from the renowned company Berstorff, manufactured in 2003, for the production and processing of demanding rubber and TPE compounds. Hnodpfxsz Eqwrj Aitou The system was operated in a pilot plant of a research institute and was used exclusively for research and development purposes. Unlike systems used in industrial production, the extruder was therefore not used in continuous production. Accordingly, the machine has only a few operating hours. The extruder is particularly suitable for research and development departments, compounders, and companies in the rubber and plastics industry that are looking for a high-performance system for trials, recipe development, material testing, and small-batch production. The detailed technical data and the available screw elements can be found in the attached documentation. The existing equipment allows for flexible configuration of the screw for different compounding tasks.

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation • Suitable for various media viscosities • High operational reliability and durability • Bidirectional operation possible • Industrial-grade continuous operation Applications: • Oils and lubricating media • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps Hsdpfez Slnzox Aitjnu • Price listed is for 1 piece.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Hsdpfsy Ufk Rex Aitenu Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Hnsdpfxjzxxifj Aiteu Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Hnsdjzhnluopfx Aitsu

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Hnjdpfx Aoz S Idkjiteu Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 liters Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Hnjdpfxex Dip Ts Aiteu Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Hnodsx Sq I Nspfx Aitou Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 Hjdpfx Asz A Sxloitenu 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Hnodpez A R R Hefx Aitou Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC • Production Capacity: 50–120 kg/h, depending on material and operating conditions • Main Motor Power: 22 kW • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 Hnjdpfez Nmfbex Aitsu • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder Hedpsw Snlwsfx Aitonu • Water Cooled 130kW AC Motor and Drive. – Low Noise

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. Hedpfx Aiezxhfietenu The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Hnjdpfx Aijh Eydueteu Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours. Hnodpfx Aozti Tkoiteu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Hnjdpfx Ajxu Db Esitsu

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Hsdpshtvmhofx Aitonu

Condition: used, Year of construction: 2006, Main areas of application: Animal feed industry: Production of high-quality sinking or floating fish feed and pet food. Food industry: Processing of cereals, protein concentrates and structured food ingredients. The Kahl LTW 160 twin screw extruder is a high-performance industrial machine from the German manufacturer Amandus Kahl, primarily used for mixing, kneading, cooking, and shaping viscous materials (such as animal feed, fish feed, or food components). The machine is characterized by its modular design and integration into complete, turnkey production lines. Format: Screw diameter (??): 160 mm Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, Hodpfx Aiovfxqyetjnu 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Hodpjzc I Igsfx Aitenu Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty Hnedpfsyc Sfpsx Aitou You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER Hodpfx Aiezxr Uujtsnu - Type: DS 7.22 - Year: 2006 - Parallel twin screw, ø70mm, 22LD - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW - Up to 40 rpm - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 15,000 h, includes 3x Brabender gravimetric dosing units includes stand includes chiller includes temperature control unit includes 1x side feed; a second LSB (lateral screw feeder) is also included, and installation is possible on each cylinder. More information available upon request. Inspection is possible in Hilpoltstein. Hnsdpez Eu S Tjfx Aitsu

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 63 Serial no.: 063.008271.r.1004 Screw diameter: 2 x 63 mm Hsdpfx Aiozrt Enjtonu Screw length: 17 x D Condition: used

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW Hedpfxei Dtbqj Aitonu L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.