Used Laser Measuring System for sale (44,525)

Condition: used, Wente CamSorik GmbH Laser measuring system / 3D laser measuring camera Wente CamSorik LaserCam_hs LC691103 Complete laser measuring system with tripod system, laptop, LaserCam_hs software, and documentation For sale is a used laser measuring system from the manufacturer Wente CamSorik GmbH. The system is suitable for non-contact measurements, 3D measurement technology, quality control, position detection, as well as industrial measuring and automation tasks. Lodpfx Asz Ndq Heb Aohn Technical data: Manufacturer: Wente CamSorik GmbH Model: LaserCam Type: LaserCam_hs Serial number: LC691103 Year of manufacture: 2018 Made in Germany Laser class: 2 Wavelength: 630–690 nm Laser power: < 1 mW Standard: EN 60825-1:2007 Network interface: Ethernet (RJ45) IP address: 192.168.1.121 Dimensions of sensor unit (approx.): 620 × 240 × 240 mm (L × W × H) Total weight including accessories and tripods: approx. 28 kg Software / Laptop: Acer TravelMate laptop LaserCam_hs Version 7.2.10.555 Wente CamSorik GmbH LaserCam_high speed documentation available Equipment: LaserCam_hs sensor unit COLA receiver / transmitter LED ring light Ethernet interface Industrial connector 2 × Manfrotto professional tripods Acer laptop including power supply LaserCam_hs software Documentation Connection cables and accessories as shown in the pictures Application areas: Industrial measurement technology 3D measurement technology Quality control Robotics and automation Research and development Production monitoring Scope of supply: Wente CamSorik LaserCam_hs LC691103 2 × Manfrotto professional tripods COLA receiver / transmitter Acer TravelMate laptop including power supply LaserCam_hs software version 7.2.10.555 LaserCam documentation Connection cables and accessories as shown in the pictures Condition: Used Laptop and LaserCam_hs software have been started. Optical condition as shown in the pictures. Normal signs of wear and tear. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Eos EOSINT plastic laser sintering system P380, fully operational with extensive accessories. Ljdpfx Aoyghhueb Ajhn

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Ledpfszdqkrjx Ab Aohn Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Ledpfez Slu Iex Ab Aehn Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: used, Stäubli Type: Stäubli Robot RX160 and CS8C controller with handheld device, software, and PC. Measuring Robot Measuring robotics for measuring, analyzing, and evaluating quality characteristics. RobFlow (measuring robotics software) Full version and dongle on an integrated Siemens industrial PC. 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical Data: Measuring range 0.1 … 50 m on natural, diffusely reflecting surfaces, 50 m up to a maximum of 150 m on a reflector panel. Linearity ±2 mm (+15°C … +30°C), ±5 mm (-10°C … +50°C) Resolution 0.1 mm Repeatability ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at a distance of 10 m Beam diameter < 35 mm at a distance of 50 m Beam diameter < 65 mm at a distance of 100 m Laser divergence 0.6 mrad Operating temperature -10°C … +50°C Storage temperature -20°C … +70°C Applications: RobFlow is a modular system. The scope of functions of the standard package can be expanded with additional plugins for specific tasks and customer-specific extensions. With the available functions, the following applications can be implemented, for example: Infotainment testing: Optical and haptic tests Individual operations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column testing: Lhsdezdyt Aopfx Ab Ajn Haptic tests along complex paths Large measuring range thanks to a multi-calibrated force/torque sensor Easy to program thanks to RobFlow Air vent end-of-line testing: Haptic and optical tests Interchangeable test adapters for a variety of devices Automatic testing, evaluation, and labeling including integrated leak test Vehicle seat testing: Functional and haptic tests Headrest distance measurements Comfort and stiffness assessments Service life and fatigue tests The advantages of RobFlow at a glance: User-friendly operation No programming language skills required Variable and dynamic test sequences Branching sequence control Easy exchange of test programs between development and production Extensive analysis and evaluation functions Graphical measurement data display and report generation Flexible and expandable through plug-in architecture Stäubli Robot RX160 with 379 operating hours Controller CS8C RX160 Lifting capacity (nominal load - kg) 20 kg and handheld device SP1 Total weight 500 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Carl Zeiss Jena ULM 01-600C Universal Length Measuring Machine Manufacturer: Carl Zeiss Jena Model: ULM 01-600C Serial No.: 7104 Digital Readout: AE101 Description Lsdpfo Ady Iksx Ab Aehn Carl Zeiss Jena ULM 01-600C universal length measuring machine with AE101 digital readout and a comprehensive set of original accessories. The machine comes from a former metrology environment and includes multiple fixtures, measuring attachments, tables, centers, and original storage boxes as shown in the photographs. The machine has been stored for a number of years and has not been tested recently. It is therefore offered in its current condition. Included Carl Zeiss Jena ULM 01-600C measuring machine AE101 electronic display unit Original measuring fixtures and accessories Various probes, supports, tables, and mounting equipment Original wooden storage cases Everything shown in the photos Stored unused for several years Not recently tested Sold as-is Calibration status unknown

Condition: used, Brüel & Kjær LDS Dactron Shaker Control System / Vibration Testing Controller Lsdpfx Aozrtylob Aohn LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Mains connection: 100–240 V AC Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Scope of delivery: 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Trumpf HAAS Type: HAAS Laser HL556D Wavelength of laser light: 1064 nm Minimum power: 5 W Maximum regulated power: 550 W Beam parameter product: 25 mm-mrad External dimensions: Width 1250 mm, Height 1580 mm, Depth 720 mm Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pole, 63 A, 6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are connected to the connections and sealed with two hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20 V ± 10 %, 3P + PE, 50 Hz 20-01-38-00 V ± 10 %, 3P + PE, 60 Hz Scope of delivery: (Laser system, laser head, and replacement cable…) Ljdpozdrwgofx Ab Ashn (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2023, operating hours: 12,000 h, condition: like new (used), functionality: fully functional, construction height: 540 mm, Build Cylinder Size: 2x 400x400x520 mm Lhjdpfon Dxbyjx Ab Aen Scanning Speed: 15,2 m/s Scanner: High-precision three-axis digital galvo system Laser: CO2 Laser, 1×100W Max. Chamber Temperature: 190°C Gewicht: ca. 3.000 kg incl. 260kg FS3300 Powder incl. Chiller incl. N2 Generator incl. Breackout Station

Condition: excellent (used), I am offering for sale a professional HBM MGCplus measuring system from Hottinger Baldwin Messtechnik (HBM). This is a high-end, modular measuring amplifier used in research laboratories, industry, and testing stations for signal acquisition and analysis from sensors. The device is equipped with a control panel with an LCD display and installed measuring modules. The unit being sold was removed from an industrial installation. Specifications: • Manufacturer: HBM – Hottinger Baldwin Messtechnik • Model: MGCplus • Control unit: AB22A • Installed modules: ML60B BL01 (2 units) AP17 SY03 • Power supply: 115–230 V AC, 50–60 Hz • Maximum power consumption: 300 VA Condition: • Used. Lsdpjz Snq Rsfx Ab Ajhn • Visual condition as shown in the photos – normal signs of use.

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Lhedpfxexv A T Nj Ab Ajn Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: used, Included: KEYENCE LJ-V7300 laser head - 3 units KEYENCE LJ-V7001P laser profiler - 2 units CA-CH5 cable (CA-CH5 – VISION SYSTEM CAMERA CABLE High-Speed Type, 5m – 85444290 – 0DH70207, 0DH70209, 0DH70211) for connecting to the LJ-V7000 series controller - 3 units. Individual units can be purchased. More information at tobesold.eu Professional KEYENCE LJ-V7300 laser profilers - 3 units, designed for non-contact 2D and 3D measurements with high accuracy. The device uses laser scanning technology for fast dimensional, profile, height, and geometry inspection of parts in industrial and laboratory applications. The LJ-V7300 model is used in automated quality control, measurement of production components, surface inspection, and advanced machine vision systems. Thanks to its high measurement speed and high resolution, it enables real-time measurements on production lines. LJ-V7300 – 2D/3D Laser Displacement Profiler 300+/- 145 mm – 90314990 – 88710030, 88710048, 88710056 Specifications Manufacturer: KEYENCE Model: LJ-V7300 Type: 2D/3D laser profiler Measurement range: 300 ± 145 mm Measurement technology: non-contact laser measurement Application: height, profile, shape, and geometry measurements KEYENCE LJ-V7001P is a professional controller designed to work with LJ-V series laser profilers, used in advanced 2D and 3D measurement systems. The device is responsible for processing measurement data, analyzing profiles, and integrating the system with industrial automation and quality control stations. The controller was designed for fast analysis of data from laser sensors, enabling precise measurements of height, geometry, shape, and surface inspection in real time. Thanks to its industrial design, it is suitable for use in demanding production environments and research and development laboratories. Specifications Manufacturer: KEYENCE Lhedpfxeziddce Ab Ajn Model: LJ-V7001P Type: controller for 2D/3D laser profilers Version: PNP Series: LJ-V Part numbers: 90314990, 88710101, 88710116 Application: used with KEYENCE LJ-V laser sensors and profilers Applications industrial metrology, quality control, 2D and 3D measurements, industrial automation, machine vision systems, surface and geometry inspection, research and development laboratories. Key features fast, non-contact laser measurement, ability to create 2D profiles and 3D models, high measurement accuracy and repeatability, integration with automation and quality control systems, suitable for continuous operation in an industrial environment. The devices come from equipment used in research and development activities related to measurement systems, metrology, and industrial automation. Technical and visual condition as shown in the product photos.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 09120035, total width: 970 mm, total length: 930 mm, total height: 1,620 mm, overall weight: 445 kg, Equipment: documentation/manual, type plate available, Dear Sir or Madam, We are selling our Tesa Micro-Hite 3D measuring machine. The measuring machine is in very good condition and has been well maintained. In addition, there are a number of accessories included. Lhodpfx Aezy H U Seb Ajn You can see these in the images below. If you have any questions, please do not hesitate to contact us.

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Lsdsd N Hguepfx Ab Aehn Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: used, 3D MICROMAC Type: microCUT laser marking system microCUT Enclosure IPG laser source Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60Hz Lhodpfxszdqp Ie Ab Asn Power consumption 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Setpoint tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Setpoint tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous Wavelength 1070nm Power 5kW Frequency 5 kHZ Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Working pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: microCUT laser marking system Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Steinheil KONTUR 408-2/D optoelectronic contour and wave measurement system High-precision optoelectronic contour and wave measurement system, Steinheil KONTUR 408-2/D, with high-quality Jenoptik optics. The system is used for non-contact, high-precision, and fast measurement of rotationally symmetrical components (e.g., shafts, camshafts, turned parts). The device scans the measurement object non-contact using the shadow image principle. Rotational measurements are recorded with up to 1440 measurement points on the circumference per measuring point. The evaluation and quality control are performed directly via an integrated SPC software (Statistical Process Control) on a Windows NT-based system, with clear tolerance bars and diagrams. The system is housed in a closed aluminum profile housing with a transparent protective structure and is secured by professional safety light curtains. System Overview: Operating principle: It scans workpieces non-contact using the shadow image principle. Main application: Fast and precise measurement of complete workpiece contours and shafts in industrial environments. The measuring unit (KONTUR 408): - Vertical measuring system with integrated IR LED lighting and sensor technology - Measuring range: diameter from 4 to 85 mm, workpiece lengths up to 400 mm - Drive & scales: Brushless servo motors and high-precision Heidenhain scales - The device is housed in a stable aluminum profile frame with transparent protective walls and Sick safety light curtains. The control & IT infrastructure: - A robust 19-inch control cabinet (Rittal) houses a separate PC workstation that controls the evaluation and visualization (historically designed for Windows NT). - Various conventional interfaces on the rear (including RJ-45 network, serial COM ports, parallel LPT2 printer port, AUI interfaces, and BNC coaxial connections). Technical data: Manufacturer: Steinheil Model: KONTUR 408 Measuring range diameter: 4 mm to 85 mm Measuring range length: up to 400 mm Resolution diameter: < 0.5 µm Ljdpfx Aozz Hwvsb Aohn Resolution length: 0.5 µm Resolution rotation: 0.018° Measuring accuracy (at 20°C): Diameter: ± 2 µm, Length: ± [5 + L [mm] / 100] µm Scanning rate: 2000 per second / 5000 per mm Measuring times: 10 to 50 seconds (depending on the number of test features) Measuring systems / scales: High-quality Heidenhain scales (length & rotation) Drive system: Brushless DC servo motors (controlled via Elmo NBA 10/200RH amplifiers) Process computer: VME bus computer in the Rittal cabinet Evaluation/Visualization: PC workstation (designed for Windows NT) Lighting: IR LED system (lifetime approx. 50,000 hours) Protection class: IP 54 Operating temperature: +10 °C to +45 °C Dimensions (W x H x D): approx. 590 x 900 x 380 mm Weight: approx. 100 kg (plus peripherals / cabinet) Installation position: Tabletop device / tabletop system "Everything from one source: We would be happy to offer you a suitable bank financing for your project." Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, EOS Type: P390 Eosint P 390 – Laser Sintering System (SLS) Operating hours: 6735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & control terminal Exchange frame with build platform The Multibox is a typical accessory for powder handling in EOS systems. It is used for the transport and temporary storage of the material. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, energy consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (± 0.1 °C) Dimensions & weight: Machine (W × D × H): approx. 1230 × 1175 × 2100 mm Control cabinet: 610 × 790 × 2100 mm Control terminal: 950 × 700 × 1550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-cooled – High-pressure pump Technical data Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ± 0.1 °C Cooling type: Air-cooled Pump: High-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: Water or water-glycol Connection: NPT version ("AN") Supply: 200–230 V AC, 1-phase Refrigerant: R407C Weight: approx. 1110 kg Lhedpfxszimhqs Ab Aen Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Bielomatik Type: K3633/023 Bielomatik Laser Welding System Machine Description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. In the middle part of the machine frame is the working area with the welding station, the tool (on the rotary table), and the clamping system for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area by a laser-proof enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser Type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic Data Machine Equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted. Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is firmly mounted on the back of the machine. Laser system from IPG. 1 fiber laser 300W cw, at the fiber optic end, 1070nm - completely air-cooled. 1 power supply for laser unit, pilot beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour 1 Scanner - 20 aperture Optics, F-Theta lens, focal length determines the processing field and processing distance 2x base tool, tool coding with transponder Clamping system for holding a mask with absolute encoder with pneumatic clamping system for controlled pressing of each welding part Pneumatic air shower for protection of the lens housing Microbox PC427B incl. RTX (Siemens) Pre-installed software - Siemens S7 PLC Profibus, Profinet, Ethernet, RS232 interface Touch panel 15” for operation and data/parameter input, machine lighting Connection flange for on-site extraction Machine Data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly screwed onto the machine frame. Area requirement: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse: 16A Exhaust: Nominal diameter ∅160 Air volume 500-1000 m³/h Lhedpfxszgaazs Ab Ajn Weight approx. 2000 kg Condition: used (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Tekol / Trumpf Laser welding system Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 extraction system Description: For sale is a professional Tekol LAP S4 laser welding system with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction system. The system is a closed, precision laser welding station for fine, pinpoint and low-distortion welding operations on metal parts. The pulsed laser enables very controlled heat input, clean weld spots and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototype construction and small series production. Closed protective cabin with safety system, control unit, rotary table and extraction/filter system. Technical data – system Tekol LAP S4 Operating voltage: 400 V ~ N / PE Current type: 3~ 400 V, 50 Hz Rated current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel ranges X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary table: 2-stage Technical data – laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical data – extraction system TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Air volume flow, free-blowing: approx. 390 m³/h Effective volume flow: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound pressure level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: Pre-filter Particle filter Activated carbon filter Weight approx. 900 kg Condition: used Scope of delivery: (See picture) Laser welding system Tekol LAP S4 TRUMPF TruPulse 44 laser unit Lhodpezizpcofx Ab Aon Extraction system TBH GL 230 Documentation / folders / data storage media Keys and accessories as shown in the photos (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Lodpfey Nwtyox Ab Aohn Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Lodpszgci Ejfx Ab Aohn Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 2 x Videojet Laser Marking Systems for date/batch coding and marking with 1 x AD Oracle laser fume extraction system. Lhjdozyu Igjpfx Ab Aen Date of manufacture - 2019. The marking of the product surface is performed by the effect of intense laser radiation on the product material. The laser beam is focussed onto the product surface and heats up the topmost layer of the material, which causes a color change or a vaporization of the topmost dye layer. Laser Marking System model – 3340 IP54 LASER MARKING SYSTEM. Laser Marking System serial numbers - V1098/498 and V1908/499. Laser Marking System electrical requirements - 100-240 V / 50-60 hz / 1 phase. Fume extraction system model - AD Oracle. Fume extraction system serial number - 50067797003. Fume extraction system electrical requirements - 115-230 V / 50-60 hz - 1 phase.

Condition: used, Year of construction: 2021, functionality: fully functional, Equipment: type plate available, We are offering this used Keyence VHX-S750E measuring system, manufactured in 2021. Model: VHX-S750E Serial number: 8B120052 Country of origin: Japan Lhjdpfsz Hipvjx Ab Asn Features: • VHX-7000 camera head • Motorized stand • Control panel (Remote Console) • Integrated VHX monitor • Specimen stage • Standard lighting unit • Housing in good condition • No obvious damage 1. Software license available, but not accessible; no USB stick included. 2. No written proof of functionality; the microscope can be tested before purchase. 3. No additional lenses available. 4. No calibration certificates. 5. Manufactured around 2021; originally purchased as new. 6. Includes the original PC/controller in the scope of delivery. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2024, Theodolite DT-405, Video Measurement System VM-18, Angle Measurement Unit, Camera System used, from business liquidation Original purchase: 2024 Information and data according to the manufacturer: with active target panel Range up to 130m Video display of H and V angles versatile applications lockable H and V axes carrying handle collimating telescope zoom camera LED target panel motorized focusing unit Note: Operation only possible via monitor MF-03 Charging cable for Geo-222X target panels available Operating manual Transport case without carrying strap without adjustment tool without rain cover We recommend an inspection Lhjdo Ab R Upjpfx Ab Aon Information without guarantee Information, details, and technical data from the manufacturer To avoid any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are Monday to Friday from 8:30 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired after prior appointment. Subject to prior sale, changes, errors and misprints.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 2299.001, For sale is a high-quality Modular Mass Production Tester (MPT) from NTS Optel – a professional testing and measurement system designed for automated quality control of optical components such as wafers, sensors, or micro-optics. This machine was developed for precise high-volume inspection of optical components and delivers the highest measurement accuracy, reliability, and flexibility for industrial applications. Thanks to its modular design, the tester can be perfectly adapted to specific production or development requirements. 🔍 Features & Equipment Ledpfx Abey R Dzgs Aohn • Integrated laser module (940 nm, circularly polarized) for precise optical illumination • High-resolution camera with automatic calibration and large field of view • Robot-based wafer handling (EFEM) for automated loading and unloading • Analysis software for evaluating efficiency, contrast, uniformity, and performance • CE-certified, including safety interlock and cleanroom-compatible design • User-friendly control via touchscreen and integrated GUI system • Connectivity for LAN, power, and compressed air (6 bar) ⚙️ Technical Advantages • Automatic image capture and evaluation of test specimens (DUTs) • Supports customer-specific software modules (DLLs) • Low maintenance, robust construction, high operational reliability • Optional: Z-axis control and wafer flip station 💡 Applications Ideal for research, development, quality assurance, and series production in the following sectors: • Optoelectronics • Sensor manufacturing • Semiconductor technology • Microsystem technology