Used Laser Diffraction System for sale (39,380)

Year of construction: 2020, condition: like new (used), Sympatec laser diffraction system. HELOS/BR multi range, laser diffraction sensor for particle analysis with automatic set-up of selectable measuring range of up to 5 range modules between 0.1 micron – 875 micron. RODOS, dry dispersing system, injector diameter 4 mm, bulk hardened steel; with funnel adapter, including flow – optimized extraction, recommended particle size range: product dependent up to 1500 micron. Lredpfxoh Nyfco Aiien VIBRI, intelligent vibratory feeder, for the RODOS or GRADIS system family, complete, comprising chute, input funnel 150 cm3 and connecting cable for RS485. SUBMICRON module, R2, for HELOS/R multi range series, measuring range: 0.25/0.45 – 87.5 micron. TOPMICRON module, R4, For HELOS/BR multi range series, measuring range: 0.50/1.8 – 350 micron. Nilfisk ATTIX 33-2H PC, 230V AC, dust class H Computer system Fujitsu ESPRIMO E957 E90+, i7-7700 3,60GHz, SSD. Fujitsu TFT display 27” PAQXOS software, for the operation of all Sympatec instruments with TCP/IP communication, for computers with Windows 7 or 10, on data storage media, including documentation and software protection key.

Condition: good (used), TRUMPF TruLaser Cell 7040 3D laser cutting system with 3000 W Manufacturer: TRUMPF Model: TruLaser Cell 7040 Type: L31 Year of manufacture: 2016 Operating hours: 17,024 h Laser source: TRUMPF TruDisk 3001 Laser power: 3,000 W C-axis: NX360° B-axis: ±135° Travel range X: 4,000 mm Travel range Y: 2,000 mm Travel range Z: 750 mm Work table: movable Work table height: 750 mm Front opening: automatic sliding door Protective cabin: available Protective cabin roof: available Camera for work area monitoring: left Monitor: available Coordinate system: Standard Control system: TruTops Cell Basic Voltage: 400 V Frequency: 50 Hz Lodpozfvrkofx Aiiorn Connection power: 13.5 kVA Required fuse rating: 80 A Laser cooling: Water-water Laser cooling unit: Standard Extraction system: available Dust extraction duct: Standard Dust extraction duct length: 30 m Additional cutting gas: Air Additional equipment: Dust collector manufacturer: Herding Filtertechnik System: MultiCoater Dosing unit: MCI 55/1 Extinguishing system for compact dust collector: Carbon dioxide Chiller manufacturer: Riedel Type: PC 161.1L4-D13W Year of manufacture: 2016 Refrigerant: R407C Filling quantity: 2.5 kg Rated voltage: 400 V Phases: 3~ Frequency: 50 Hz Rated current: 11 A Protection class: IP54 Max. operating pressure: 28.7 bar According to the operator, the service and maintenance intervals have always been observed.

Condition: excellent (used), Here, we offer you an Iridex laser system, the OcuLight SLx. Laser IRIDEX Oculight SLx Tri-Mode 810 nm Diode Laser Description: Designed for longevity, with a thermal management system to increase the efficiency and reliability of laser conversion. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The tri-mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems offer a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repeated exposures. The LongPulse mode delivers laser energy over longer periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of the thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top unit Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot-SLAs, LIO and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required. Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also has some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractive glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser-indirect ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in the supine position. It is considered to have a unique optical design in the industry, which eliminates the need to adjust the laser focus and allows for a wide range of working distances. Type: Iridex OcuLight SLx Lrsdpfxjzd Uubo Aiijn Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer you an Iridex laser system, the OcuLight TX. IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green, continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a generous 2500 mW of laser power ensures pulse durations and pulse intervals of 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design can be easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Targeting laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Ljdpfx Aezd Ut Rjiisrn Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Type: IRIDEX OcuLight TX Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, ILD1800-100, optoNCDT 1800, Micro Epsilon Laser Triangulation Sensor System Lrsdpfx Aieq S Sm Rsien Model: ILD1800-100 Condition: Used

Condition: used, ILD2200-40(226), optoNCDT 2200, Micro Epsilon Laser Triangulation Sensor System Model: ILD2200-40(226) Lredpfx Aeq S Spaoiion Condition: Used

Condition: used, ILD1800-100(243), optoNCDT 1800, Micro Epsilon Laser Triangulation Sensor System Lsdpfx Aisq S Snkeisrn Model: ILD1800-100(243) Condition: Used

Condition: excellent (used), Eos EOSINT plastic laser sintering systems Here, we offer an Eos EOSINT plastic laser sintering system. Eos EOSINT plastic laser sintering system P385 The following items are included with the EOS P385 system: Build chamber Powder container Cooler: Termo TEK Thermochiller 1100 The following upgrade has already been carried out: Software: CDs Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on August 10, 2007 Laser replacement on May 15, 2008 X-axis drive motor replacement with a used motor on May 4, 2020 Pyrometer replacement on June 30, 2020 350mm x 350mm x 610mm Voltage 3/N/PE/400V, Frequency 50 Hz Connected load 8 kW, Fuse rating 32 A MAX. laser power 100 W, Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) Lodpfx Aiszdyx Esisrn We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Eos EOSINT We are offering an Eos EOSINT plastic laser sintering system for sale. The EOS P380 system includes the following components: Build chamber container Powder container Overflow container 3DM 8-zone process chamber heater, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin Build volume: 350mm x 350mm x 610mm Power supply: 3/N/PE/400V AC Lodpezdyxlefx Aiiorn Frequency: 50 Hz Connected load: 8 kW Fuse protection: 32 A Maximum laser power: 100 W Laser class (open): 4 Laser class (closed): 1 Weight: 850 kg Model: EOSINT P 380 Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Here, we offer you a 3DMICROMAC laser marking system. microCUT Enclosure Laser source IPG Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60 Hz Power consumption 51.3 kW Control voltage 24/5 VDC Main fuse NH 100A gG Module: Laser source: Mains voltage 400 VAC Frequency 50/60 Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Operating pressure 6-10 bar Temperature 10-50 °C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Set point tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Set point tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG, Type: YLS-5000, Mode: Continuous wave, Quasi-continuous wave Wavelength 1070nm Power 5kW, Frequency 5 kHz Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60 Hz Net cooling capacity 40.3 kW Ledpfezdqp Iex Aiijrn Camera system: Manufacturer e2V, Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v, Type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration, Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Operating pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: Laser marking system microCUT Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon controller LPC03. Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +-10% Laser power: 550 W Supply voltage 100-264V +- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a complete PC in a very small space. Instead of a hard drive, a replaceable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is ideally suited for tasks in the field of measuring, controlling and regulating in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measuring and control system, the operating system and software are installed on the flash disk. Technical data: Lrodpfezdqkrex Aiisn Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: replaceable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212mm x 80mm x 250mm (Height x Width x Depth) Protection class: Front: IP40 Environment: 15°C - 40°C Type: LPC03 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2012, condition: good (used), Item: inos iSENS laser sensors with control unit, cable, and PC interface Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone. Ljdpfx Aiezdn T Rjiern

Condition: used, Year of construction: 2011, functionality: limited functionality, laser power: 6,000 W, laser source model: TruFlow 6000, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Connection power: 114 kVA Mains connection: 400 V Control voltage: 24 V Lsdpfxozaqzko Aiiern Fusing: 200 A Compressed air connection: 6 - 14 bar Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm Note: The machine's dongle is defective.

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals Lredpfx Aijd N Hgueion - Glass - ceramics - Carton - Different types of plastic

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm 3D printer SLS Laser System IR Laser Diode 5 (W) Ljdpfxsu N Auus Aiiern Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *

Condition: good (used), Year of construction: 2013, 4 piece diode laser system, Limo Diocut 1300 - second-hand - : Price per piece ex location: 1.950.-€ (net)! Lsdpoumi Stofx Aiisrn Manufacturer: LIMO (Lissotschenko Mikrooptik) Type: Diocut 1300 Year of manufacture: 2013 400V, AC +/- 10% 50/60 Hz I < 16A, 3 phase, + N + PE Condition: good, Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 2007, condition: ready for operation (used), Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible. Lsdpfx Aijy U Nrfoiorn

Condition: new, Year of construction: 2024, Manufacturer: DURMA Model: HD-F 3015 III Fiber Year of manufacture: Available for order (delivery time 6-8 weeks) Working area X-Y-Z: 3060x1530x160 mm Laser power: 6000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 25 mm Lrsdpfx Aiofkpamoisn Sheet thickness, stainless steel: 15 mm Sheet thickness, aluminum: 20 mm Sheet size: 3048x1524 mm Load weight: 200 kg/m² Speeds, X-Y axes: 100 m/min. Speeds, X-Y axes, simultaneous: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication system Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer recognition and measurement Pierceline Focusline

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Lsdey Spclspfx Aiiern Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: ready for operation (used), Year of construction: 2011, Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026. Lrsdpfjy T N Htjx Aiion

Year of construction: 2004, condition: excellent (used), EOSINT P730 LASER SYSTEM Lrsdpfx Aisy N Uraoijn Year: 2004

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, laser power: 6,000 W, laser source model: TruFlow 6000, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Lrjdpsy Hqahofx Aiisn Connected load: 114 kVA Mains connection: 400 V Control voltage: 24 V Fuse protection: 200 A Compressed air connection: 6 – 14 bar Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm Lrjdpfx Asy N Nm Sjiion With loading and unloading system for the sheets

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Lrsdpsy Nwtyjfx Aiion Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: new, Year of construction: 2026, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. Lredpfed Dczzjx Aiion The Kantenking HTK3030 has a speed of max. 22 m/min.. Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Please don't hesitate to contact us.