Used Lasco Skp 2500 for sale (3,427)

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t Fjdpfjyx Inasx Ad Iegd ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley Fgodpfxod N Rt Do Ad Ied -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Fgsdpfx Ajl R Hy Ajd Iod Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 100.981.48, functionality: fully functional, hydraulic forging hammer (H1) Manufacturer: LASCO Fgjdpfxoziw Nxs Ad Iod Type: HO - U 400 SO Year of manufacture: 1999 Impact energy: 40 kJ Ram stroke: 710 mm Ram weight: 3,000 kg Machine foundation with spring damping elements, forging furnace, gas-heated, power output: 800 kW, underfire zone, pre- and main chamber burner, work platform

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ram speed: up to 5 m/s Fjdpfx Adoziw Nlj Isgd Ram stroke: 520 to 760 mm Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: good (used), Year of construction: 2005, machine/vehicle number: 12345, functionality: fully functional, Used hydraulic forging hammer Manufacturer: LASCO Type: HOU 250 SO Year of manufacture: 2005 Fjdpfjzidv Ssx Ad Isgd Impact energy 40 kJ, ram stroke 710 mm, ram weight 3,000 kg, machine foundation with spring damping elements, conveying system by STAHLMANN, two-module design, work platform, automatic feeding, infeed and outfeed, water cooling.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 4 t, stroke length: 1,200 mm, oil tank capacity: 700 l, total height: 7,480 mm, overall weight: 78,500 kg, year of last overhaul: 2023, Equipment: documentation/manual, Oil-hydraulic forging hammer Lasco type KH 400 YOM 1980 Fully retrofitted and modernized 2023. Work impact: 4,000 mkg Fall height in normal dies: 1,200 mm Ram weight: 3,350 kg Length between the guiding light: 725 mm Ram: 620 mm Motor power: 60 kW Weight of the anvil: 44,000 kg Total weight of the hammer: 78,500 kg Total height of the hammer: 7,480 mm Building height above floor level: 6,260 mm Oil tank capacity: 700 liters Piston rod Length: 500*2800 mm Rubber cushions: 90/2900*120 mm Operating voltage: 380 Volts Control voltage: 220 Volts Slowly ON: 0.62 m/min. Fsdpfxezh Ncho Ad Isgd

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm T size: 22mm Number of matching pieces:5 Length: 1250mm Width: 750mm Fgsdpewu D Afsfx Ad Ijd Height: 2500mm Weight: 2900kg

Condition: excellent (used), Year of construction: 1969, functionality: fully functional, pressing force: 160 t, stroke length: 650 mm, table width: 1,200 mm, table length: 800 mm, working height: 600 mm, Equipment: safety light barrier, Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Fsdpfxev E Rd Ej Ad Ijgd Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. Fgsdpfxjv E Efds Ad Isd New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Fgedpfxjyznhlj Ad Isd Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer Fsdpfjx Svm Rsx Ad Ijgd 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 750 kW (1,019.72 HP), Drying Technology Title: Multi-material Dryer + Boiler Condition: Used – Very good condition Description: For sale: multi-material dryer Brand: Gerdes System with perforated moving floor Moving floor driven by electro-hydraulic power unit 3 levels 2 fans per level (6 fans in total) Control cabinet with high-performance PLC Temperature sensors for each level Blockage detector LASCO wood chip boiler 750 kW Fully automatic Remote monitoring Ash screw conveyor and automatic ash removal Fire protection flap Fsdpfx Adjyyddgs Iegd Complete package sold with various accessories (screws, conveyors, etc.) - Hydraulic power unit - Material receiving bin - Belt conveyor - Rotary screen - Auger elevator for feeding the dryer - Reclaim auger under the dryer - Trough screw conveyor - Filling chamber and wood chip storage tank for the boiler - Chip receiving bin and screw conveyor - 2 control cabinets - Various spare parts (pipes, clamps, electric motors, filters, cyclone, etc.) To be seen on site. Excellent working condition. Also for sale: KAHL pellet press, complete installation with bagging system. More information on request.

Condition: used, Year of construction: 2002, functionality: fully functional, The machine worked perfectly before disassembly. It is in good condition and free of any cracks. Fedeyacyxepfx Ad Isgd

Condition: new, functionality: fully functional, From closed factory a batch of steel cable. Steel / galvanised / stainless steel Fgjdpfx Adoyfgtge Ied Diameter: 4- 20 mm Attached list is non verified. Offer is based on photo's shown. On-site visit on request.

Condition: used, Year of construction: 1995, machine/vehicle number: 1663459, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKP 35826-02 (03)Baujahr / Year 1995 - SN. 1663459 Frequency 50 Hz Speed 2900 min power required 3 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fgedpoh Axlpofx Ad Ijd

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 0 mm max. module 34 Fgjdpfx Ast Hw Aaod Isd min. module 1 total power requirement ca. 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 Fedpfx Adjt Hwqqe Iogd min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm Fedpfxovwgmms Ad Isgd tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top.

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Fjdpfx Adozku Hws Ijgd Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, LISEC, 2500 mm x 3500 mm Year of manufacture: 2013 Fodpfx Adjzkugdo Iegd The line is in continuous operation.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 4 mm, table height: 740 mm, input voltage: 400 V, type of input current: three-phase, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, type plate available, HYDRAULIC GUILLOTINE SHEAR 4×2500 + LASER 4 × 2500 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Fedpfx Adoyt E Aie Ijgd Maximum sheet thickness: 4 mm Maximum cutting length: 2500 mm Blade rake angle: 1° 30′ Number of strokes per minute: 20 Back gauge travel: 600 mm (standard) Distance between side frames: 2650 mm Blade length: 2550 mm Table height: 740 mm Motor power: 5.5 kW Weight: 3800 kg Machine dimensions (L × W × H): 3130 × 2030 × 1600 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line (laser guide) Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English language) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 Fodpfx Adoziaa Te Iegd power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: excellent (used), functionality: fully functional, Stromab STA 2500 pneumatic assembly press Working length: 2500 mm Working width: 1200 mm Fgsdpfxozhv Tye Ad Ied Clamping force at 8 bar: 2600 kg 2x side clamping Pneumatic control CE certified

Condition: excellent (used), functionality: fully functional, conveyor belt length: 2,500 mm, conveyor belt width: 300 mm, Length: 250 cm Width: 30 cm Stud height: 1.5 cm Height adjustable Fgsdpfx Aoyh Rq Ssd Ijd 5 units available Price: 850 EUR per unit