Used Lange B 500 K for sale (71,293)

Condition: as good as new (ex-display), Year of construction: 2024, Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material →Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins. →Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min. →Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal →Pneumatic cutt-off unit capacity max. 3 x 30 mm Hodpfjd Sb Dtsx Ag Iofg →Turntable D=600mm 67641341015f6

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm Hedpfxjwka S Is Ag Iefg - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Hfjdpjynpc Njfx Ag Isg Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 648, functionality: fully functional, operating hours: 347 h, power: 6.8 kW (9.25 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, total length: 4,000 mm, overall weight: 600 kg, For sale is a well-maintained Lange B90KF edgebanding machine. The machine is fully operational and remains connected for testing. Includes extensive accessories and basic materials. Equipment and technical data: Hfjdpfoyuvk Hsx Ag Iog - Glue pot - Pressure zone - Pre-milling unit - Edge feed - Saw unit - Milling unit - Scraper blades Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0 / 5.0 mm Electrical connection: 400V, 50 Hz, 3-phase Total power: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Weight: approx. 600 kg A video of a recently produced demo workpiece can be sent via WhatsApp on request. All information without guarantee. Price is net plus VAT. An invoice for the machine will be issued.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Hsdjy Eizzopfx Ag Ijfg Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: new, axle configuration: 2 axles, Year of construction: 2023, Brian James General Plant (3,500kg), new vehicle without initial registration, tiltable loading area, ideal for scissor lifts and warehouse equipment, year of manufacture: 2023, loading area dimensions: 3.10m x 1.70m, permissible total weight: 3,500kg, payload: 2,790kg, perforated steel loading ramp, spare wheel, immediately available. Price: €6,590.00 net / €7,842.10 gross Upon request, we can provide you with a leasing or financing offer. Mr. Ebert (Tel.) will be happy to assist you. Further information is available on our website. Subject to errors and prior sale! = Further information = Gross vehicle weight rating: 3,500 kg Contact Tobias Ebert for more information. Hjdoyfra Sepfx Ag Isfg

Condition: as good as new (ex-display), Year of construction: 2024, Contour edge banding machine up to 140 mm Work piece thickness, Speed from 2,5 - 12m/min, Quick change glue pot, Glue pot and glue roller teflon coated, Standby function, tilting machine table up to 45° and digital length counter. Standard machine incl. the following options : →electropneumatic pre-melting unit for 2 Kg Cartridge →motorized driving mechanism (patented) Hedjd Sb Duepfx Ag Isfg →supporting bars with steel balls 67641340f3652

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material Hfodpfx Agsd R U Ago Iog →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with HF motor 0.35 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surf

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Hodpfxew I U Dre Ag Iofg Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material Hsdpjip Uzpsfx Ag Iofg →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. →Automatic edge feeding for roller material over turntable D = 800 mm. →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t Hedpfx Aof Tdwcog Iefg

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Hsdped R U Acefx Ag Ijfg Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340eaae3

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface Hjdped R U Adsfx Ag Iefg →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Hfsdpfxel Rix Ns Ag Ieg Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: as good as new (ex-display), Year of construction: 2025, Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure ► Pressure bar with central adjustment and SIKO display Hfodpfjrrzkljx Ag Iog ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) ► 400 mm long infeed lineal with support ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm 67641340f13ce

Condition: as good as new (ex-display), Year of construction: 2025, 67641340dc13f Hfodpfxsl Rix Es Ag Ieg

Condition: used, volt / V ampere / A weight / kg total power requirement / kW BELLHEIMER METALLWERK - gear motor Hfedpfxey Surxo Ag Ieg Type: SK80 S/4 BRE10 SRTW No.: NM1008302361.00 Power: 0.55kW - 0.63kW Rotation: 1375 rpm - 1650 rpm IP55

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Hodpfxsya Dh Do Ag Isfg Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg Hfedpfx Agoq Ikgke Ieg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Condition: new, Year of construction: 2026, functionality: fully functional, sweeping width: 530 mm, fuel type: electric, drive type: Elektro, Scrubber dryer Condition: New machine Technical condition: New Battery voltage: 24V Battery capacity: 180Ah Battery type: Gel Battery year: 2025 Battery condition: New Description: New machine with 12 months warranty Hfodoyi Impepfx Ag Ieg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Hodpfx Agoyt R N Ue Iofg Weight 451 kg Total power requirement 11 kw

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Hjdpsw Ni Ibofx Ag Iefg

Condition: excellent (used), mileage: 561 km, power: 368 kW (500.34 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Power brake booster - Low noise emissions - Speed limiter - LED lights - Alloy wheels - Air horn - Particulate filter - Sun visor - Stability control - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 21,160 kg Transmission Gearbox: I-SHIFT, automatic Axle Configuration Front axle 1: Alloy wheels; steerable Front axle 2: Alloy wheels; steerable Rear axle 1: Twin tires; alloy wheels Rear axle 2: Twin tires; alloy wheels Functional Lifting capacity: 18,000 kg Lifting height: 2,200 cm Crane: HIAB X-HIPRO 548 E-8, mounted behind the cab Body make: HIAB OPT25S56 Condition Technical condition: very good Visual condition: very good NEW VOLVO FMX 500 8X4 WITH HIAB OPT25S56 ROLL-OFF TIPPER + HIAB X-HIPRO 548 E-8 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 AP AXLES LEAF SPRUNG WHEELBASE 510 CM NEW MODEL FMX CAB WITH AIR CONDITIONING AUTOMATIC TRANSMISSION WITH ENGINE BRAKE ALCOA RIMS HIAB 25 TON ROLL-OFF TIPPER TYPE: OPT25S56 ADJUSTABLE UNDERRUN PROTECTION HIAB X-HIPRO 548 E-8 CRANE 8X HYDRAULIC EXTENSIONS Hfedpsuxviwsfx Ag Isg RADIO REMOTE CONTROL 5TH + 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 18,000 KG MAX WORKING HEIGHT 2,200 CM MAX LIFTING CAPACITY AT 1,960 CM: 1,720 KG 4X SUPPORT LEGS NEW BUILD UP TO 2023!!! 2 UNITS IN STOCK FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: excellent (used), mileage: 493 km, power: 368 kW (500.34 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, operating hours: 1 h, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Power-assisted brakes - Low noise - Speed limiter - LED lights - Alloy wheels - Air horn - Particulate filter - Side skirts - Sun visor - Stability control - Power Take-Off (PTO) = Additional Information = Transmission Gearbox: I-Shift, automatic Axle Configuration Front axle 1: Alloy wheels; Steering Front axle 2: Alloy wheels; Steering Rear axle 1: Twin tires; Alloy wheels Rear axle 2: Twin tires; Alloy wheels Weights Unladen weight: 21,160 kg Functional Mast: Telescopic (8 sections) Mast length: 22 m Lifting capacity: 18,000 kg Lifting height: 2,200 cm Crane: HIAB X-HIPRO 548 E-8, mounted behind the cab Body manufacturer: HIAB X-HIPRO 548 E-8 CE mark: yes Condition Technical condition: very good Visual condition: very good NEW VOLVO FMX 500 8X4 WITH HIAB OPT25S56 ROLL-OFF TIPPER + HIAB X-HIPRO 548 E-8 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 AP AXLES LEAF SUSPENSION WHEELBASE 510 CM NEW FMX MODEL CAB WITH AIR CONDITIONING AUTOMATIC GEARBOX WITH ENGINE BRAKE ALCOA WHEELS HIAB 25 TON ROLL-OFF TIPPER TYPE: OPT25S56 ADJUSTABLE UNDER-RUN PROTECTION HIAB X-HIPRO 548 E-8 CRANE 8X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5TH AND 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 18,000 KG MAX WORKING HEIGHT 2,200 CM MAX LIFTING CAPACITY AT 1,960 CM 1,720 KG 4X OUTRIGGERS NEWLY FITTED UP TO 2023!!! Hfodpouxviqjfx Ag Ieg 2 AVAILABLE FROM STOCK FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Weight 431 kg Total power requirement 7,5 kw Hedpfevz Ez Dox Ag Isfg