Used Kadant Paal Baler for sale (247)

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Hodpfovaw T Asx Ag Ijnl

Condition: good (used), Year of construction: 2013, functionality: fully functional, Available from 15.05.2026 Baling Press Paal Konti 325 G, Year of manufacture 2013 Technical Data: Manufacturer: Paal Model: Konti 325 G Year of manufacture: 2013 Operating hours: 11,723 (as of 10.02.26) Pressing force: 100 t Drive power: 2 x 55 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 5-fold automatic Throughput rate at: 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12,216 x 2,530 x 2,800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data is based on the manufacturer's information. We do not assume liability for the details provided or for any potential errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Hnodpfx Aoy A Ibneg Iel Inspections are possible by arrangement. Sale against prepayment ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, filling opening width: 920 mm, filling opening length: 1,600 mm, Hello, I am selling a fully operational Paal Comdec channel baler. The machine has been serviced and is in very good technical condition. It comes complete with a belt conveyor. In 2025, the conveyor belt was replaced. Hnedpfsyk Uzpsx Ag Iol

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II, Year of Manufacture 1979 Technical Specifications: Manufacturer: Paal Model: Pacomat II Year of Manufacture: 1979 Drive Power: 11 kW Hsdpjyz Saljfx Ag Ionl Pressing Force: 27 t Channel Cross Section: 700 x 1000 mm Filling Opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale Size: 700 x 1000 mm Bale Weight: up to 400 kg Machine Dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine Weight: approx. 5200 kg Materials: Paper, Cardboard, Film Remarks: The machine is in fully functional condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Please note: All technical details are based on information provided by the manufacturer. We accept no liability for the accuracy or possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Viewings are possible by prior arrangement. Sale is ex works, without warranty or guarantee. Our payment terms require 100% advance payment.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Hedpfxeyz R Uue Ag Isnl Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput performance at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, Cardboard, Film The baler is in good condition and has been checked and tested. A video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer’s information. No liability is accepted for the data provided or for potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baler Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Hnsdpfxsyzzgns Ag Iol Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, variable length Binding: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated specifications or possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works against advance payment, without warranty or guarantee.

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg Hsdpfxsic Rl Ds Ag Ionl The hydraulic unit is functional, the drive motor is in the removed state.

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Hnedpsyqxxxsfx Ag Iel Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Hjdpfoyqxwzjx Ag Ienl Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum capacity: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm The press was in operation until the production line was shut down. Hnsdpst Ucqfjfx Ag Iel

Year of construction: 1990, condition: ready for operation (used), Bale dimensions: 800x800mm, length: 8000mm, width: 6000mm, height: 5000mm. Hnsdpfxehy N R Te Ag Iel

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced Hodpfxsvq Rtkj Ag Ionl - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Hodpfx Asy R Npiog Ionl Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Hjdpfx Agey R Npcj Ijnl Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Hnodpfx Asy R Nnfsg Isl Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 307 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg Hjdpfxsym Uxto Ag Ionl - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hedpsyrtcuefx Ag Ijnl Yorick Diebels

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Orwak 5070 baler in perfect working condition. Fully serviced, new oil. Fully equipped – strap holders, straps, hook, bale trolley. Hnodpfoy Sk H Ssx Ag Iel

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 26 t, Orwak 3325 baler in perfect working order. Fully serviced, new oil. Fully equipped. Comes with additional parts for wire tying. Hnjdoy Sk Atjpfx Ag Ijl

Condition: ready for operation (used), Strautmann PP 1207 Pressure force 58 tons Baler weight from 400-500 kg depending on material 4KW engine Baler format (LxWxH): 1200 x 700 x 800 mm Feed opening: 1145 x 430 mm Hnodpfx Aora Aq Djg Iel External dimensions (LxWxH): 1844 x 1067 x 2868 mm Feed opening: 1145 x 430 mm Transport height: 2500 mm baler weight approx. 2300 kg

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Hnedpfov Amw Nox Ag Isl Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: excellent (used), Manufacturer: Strautmann Model: PP 1207 Plus Bale size (LxWxH): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales/hour Number of ties: 4 Press weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: covered indoor/outdoor Noise level: less than 80 dB(A) Year of manufacture: 2003-2005 I also have Strautmann PP 1207 balers from 2009-2011, price 5,500 EUR Also available: Strautmann PP 1208 balers from 2014-2015 Hodpfx Aev Aiymog Isnl Strautmann AutoLoadBaler year 2018, price 7,500 EUR

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: PVF468787, pressing force: 30 t, input voltage: 400 V, bale weight: 300 kg, total width: 1,775 mm, total height: 3,225 mm, overall weight: 1,570 kg, total length: 1,025 mm, filling opening width: 1,200 mm, filling opening length: 560 mm, noise level: 63 dB, bale width: 1,200 mm, bale length: 800 mm, bale height: 950 mm, transport height: 2,300 mm, electrical fuse: 16 A, Used BRAMIN B30 plastic/cardboard baler in very good condition and ready for use. Hodsy Nnclepfx Ag Isnl Baler type B30 VD/HS with sliding door and high-speed, including BRA-IN Pressing force: 30 t Feed opening (W x H): 1200 x 560 mm Electric drive: 400 V / 4.0 kW / 16 A Noise level approx.: 62-64 dB Cycle time: 35 sec. High press chamber: 1560 mm Long piston stroke: 750 mm Dimensions (W x D x H): 1775 x 1025 x 3225 mm Transport height approx.: 2770 mm Machine weight approx.: 1570 kg Bale size (W x D x H): 1200 x 800 x 950 mm Bale weight approx.: 280-400 kg (depending on material) Sale only to commercial customers, warranty excluded.

Condition: ready for operation (used), Year of construction: 2015, bale weight: 480 kg, Brand: HSM Model: V-press 860 plus Year of manufacture: 2015 Pressing force: 418 kN Hodpfjy Nizcex Ag Ijnl Voltage: 400 V Max. bale weight: 480 kg (depending on material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 x 125 x 298.5 cm Feed opening dimensions: 120 x 65 cm Condition: Very good! Function tested. Video of the machine in operation available upon request. FLITS Rental & Sales service: With every machine, we provide a bundle of tying wire (120 wires). Need more bundles? Request a quotation without obligation.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: Hsdpfx Asx Dnb Ujg Ienl • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.