Used Jack Steel Log Infeed System for sale (49,060)

Condition: used, Log Infeed System Manufacturer: Jack Steel Year of manufacture: 2019 Nlsdpfxszmf I Rj Amyod Hydraulic log infeed system Twin-chain feed conveyor Electric control system Suitable for feeding logs to sawmill or sorting lines

Condition: ready for operation (used), Log infeed line Tähkä, equipped with a lower device for turning logs Nljdpfjxg Rvgjx Amysd

Year of construction: 2022, condition: excellent (used), functionality: fully functional, High-quality process/solution tank, stainless steel, 600 l usable volume, year of manufacture 2022, technically well-maintained. Container INOX STOC600RWP (material 1.4301), three elevated legs, top with a 400 mm dome lid, from a hygienic environment, CIP-cleaned after each batch production (last cleaned on 02/09/2026). Complete package: propeller agitator Schwarzer SRT 8-1500 (0.75 kW, 1410 rpm) with frequency inverter, motor mounted via a 250 mm adapter. Tank scale Mettler-Toledo up to 900 kg with IND360 evaluation electronics including calibration weights. Limit level sensors VEGAPOINT 21 EX (full/empty), temperature sensor WIKA TR34-B-TT EX, CIP spray head, shut-off valve DN50, tank venting with air filter. Technical data: - Tank 600 l, stainless steel 1.4301, year of manufacture 2022; agitator 0.75 kW with frequency inverter - Weighing system Mettler-Toledo IND360 up to 900 kg including calibration weights; limit level 2x VEGAPOINT 21 EX; temp. WIKA TR34-B-TT EX - Outlet DN50 DIN 11851 with shut-off valve; ATEX Ethanol/Water up to 80 %, all parts grounded; no known defects Further systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Njdpfx Amezmat Isyeld Sold on behalf of the customer through the auction house Köck. Location: Eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Year of construction: 2002, condition: good (used), functionality: fully functional, Full automatic pack infeed to Moulder Speed up to 120 M/Min Complete with manuals Automatic board turner. single board feeding system Njdpfezlbibox Amysld Min/Max length 820mm/5400mm

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Nledpfx Asy I Nugsmysd Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: good (used), mileage: 247,616 km, power: 235 kW (319.51 HP), first registration: 12/2009, fuel type: diesel, tire size: 385.65.22,5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: yellow, gearing type: automatic, emission class: euro5, suspension: steel, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, full service history, power assisted steering, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Outside temperature display - Work light - Leaf spring suspension - Brake booster - Sunroof - Differential lock - Differential lock - Tachometer - Extra lighting - Driver's seat height adjustment - Remote central locking - High beam - Low noise - Speed limiter - Tipping hydraulics - Folding exterior mirrors - Air conditioning - Particle filter - Radio/CD player - Disc brakes - Sun visor - Tachograph Njdpezkvhpsfx Amysld - Immobilizer - Toolbox - Power take-off (PTO) - Power take-off (PTO) = Further Information = Axle configuration Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Tire size: 385.65.22,5; Max. axle load: 9000 kg; Tire tread left: 60%; Tire tread right: 60% Rear axle: Tire size: 315.70.22,5; Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40%; Reduction: External planetary axles Weights Unladen weight: 11,000 kg Payload: 9,500 kg GVWR: 20,500 kg Functional Mast length: 18 m Lifting capacity: 6,200 kg Body manufacturer: N.C.H. Hydraulic Systems 1420.5.130 CE marking: yes Condition Technical condition: good Optical condition: good Damage: none = Company Information = Nidro cars Holland is located in the center of the country and is the right place to purchase your car, van, or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All types of trade-ins are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: excellent (used), Year of construction: 2017, Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Condition: The system is unused -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Nlodpfjytgrxjx Amyod -Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm Nlsdoh Di H Depfx Amyed -Weight 640 kg

Year of construction: 2026, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 820 kg, total length: 2,560 mm, total width: 1,700 mm, total height: 1,820 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO® BUNKER is ideal for feeding screening drum machines such as the ASCO® SD COMPACT or for standalone use. It ensures high throughput, smooth material flow, and long service life - making it a reliable solution in recycling, waste processing, and material handling. Key Features: • High system performance: up to 45 m³/h • Reversible bunker belt for flexible operation • Quick and easy belt change • Fully electric control with frequency converter • Durable construction for long service life Nlodpfx Aexixd Djmyed Tech Highlights: W 1.70 m · L 2.56 m · H 1.82 m · Qmax 45 m³/h · Power 2.2 kW (400 V) · Filling H 1.82 m · Weight 820 kg

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning, in very good condition. Filter area: 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan, drive power: 22 kW; volume flow: 6700 m³/h; pressure: 8000 Pa Compressed air valves: ASCO 24 Volt Number of filter pockets: 48 Nlodpfx Amsfg Iphoyed Filter medium: no longer available Insulation: Yes With differential pressure measurement Dimensions L/W/H: 3000 mm / 1700 mm / 2100 mm (up to outlet) The filter consists of 2 modules that are divided in the middle. Also available: Stainless steel cooling screw conveyor, diameter 400 mm, length 4100 mm.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wall material: stainless steel, Equipment: cooling unit, PRODUCTION REACTORS, COLLECTION TANKS, CONTROL PANELS WITH DRIVES, PLATFORMS, AND EQUIPMENT—SUITABLE FOR SYNTHETIC THICKENER PRODUCTION (AND OTHER CHEMICALS SUCH AS POLYMERS, ETC.)—MADE FROM HIGH-GRADE STAINLESS STEEL, ARE FOR SALE AND IN OPERATIONAL CONDITION. CONSULTANCY SERVICES CAN ALSO BE PROVIDED FOR THICKENER PRODUCTION UPON REQUEST. Acrylic thickeners, binders, alkyd resins can be produced, and formulations can be supplied with the sale. The machines are available as a complete set or can be sold separately. Suitable for chemical production in all industrial sectors including textiles, food, cosmetics, construction, etc. 1. REACTOR - 17-ton capacity reactor - Barely used - 316 stainless steel (tank wall 10-12mm, domes 10-12mm thickness) - 37kW ATEX-rated motor with gearbox - Electrical control panel with Delta inverter - External coil for heating and cooling - Currently heated by thermal oil, cooled by chiller cold water - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 2. REACTOR - 22.5-ton capacity reactor - Made from 304 stainless steel / 8mm tank wall, 10mm dome thickness - Unused - 22kW motor and reducer - Electrical control panel with Delta inverter - External coil and jacket for heating and cooling - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected Nedpfx Ajy Aggpjmyjld - Platform included 3. STORAGE/FEED TANK - 10-ton capacity 304 stainless steel storage/feed tank - Unused - 8mm dome, 6mm wall thickness - Full-length sight glass system to monitor product level inside - All flanges and fittings included, fully connected *Can be converted to a mixer/stirrer by adding a motor and shaft. 4. HOMOGENIZER/DISPERSING/MIXING TURRAX - IKA brand - ATEX certified - 17 L/hour, 30 kW/10 bar Note: These systems are designed for the production of thickeners used in printing and many other industries. All parts have been manufactured and supplied by experts in the field, meticulously engineered with no compromise on quality. Motor selection, sheet thickness, inverters, and other systems are of top quality and will operate problem-free for the buyer. For more detailed information, please contact us.

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Njdpou Uwygofx Amysld Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Year of construction: 2022, condition: excellent (used), functionality: fully functional, High-quality stainless steel process vessel (INOX CILC250TP) with integrated dissolver agitator, manufactured in 2022 (agitator motor 2023). Classified as explosion-proof for ethanol/water mixtures up to 80% according to applicable regulations. Cylindrical vessel made of 1.4301 stainless steel, approx. 287 liters gross / 250 liters net, three raised legs, half-cover with protective grid. Dissolver agitator, Schwarzer SRT DMK/4.0-1500 (4.0 kW, 1410 rpm) with dissolver disc, frequency-controlled, motor mounted on a 250 mm adapter outside ATEX Zone 2. Thermoplate heating/cooling jacket up to 95 °C (up to 4 bar). Vessel scale, Mettler-Toledo, up to 600 kg with IND360 evaluation electronics, including calibration weights. CIP spray head, shut-off valve in the outlet. Technical data: - Vessel approx. 287 liters gross / 250 liters net, stainless steel 1.4301; agitator 4.0 kW with frequency inverter - Temperature control: Thermoplate heating/cooling jacket up to 95 °C (up to 4 bar) - Weighing: Mettler-Toledo IND360 up to 600 kg incl. calibration weights; Ex sensorics VEGAPOINT 21, WIKA TR34 - Outlet DN50 DIN 11851 with shut-off valve; ATEX Ethanol/Water up to 80%, all parts grounded; CIP last performed on 02/02/2026 More equipment and machinery are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Nlodjzmarkspfx Amysd Sold on behalf of the customer through the auction house Köck. Located in eastern Austria, exact address on request. Collection/dismantling by the buyer.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; Nlsdpfxsicnico Amysd voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is engineered for automated crack detection on ring-shaped components, such as bearing races and gears, utilizing the eddyvisor C. In addition to crack testing, customers can inspect for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot manipulates and guides the sensor precisely along the contours of the test part. Testing is conducted using up to two probes. All relevant scanning parameters and communication protocols for controlling the eddyvisor C are integrated into the robot scanning program. At the heart of the system is the eddyvisor C, a two-channel eddy current instrument, ensuring highly reliable detection of cracks and grinding burns. Process automation is achieved by an integrated Stäubli TX2-60 robot. The entire system is managed and operated via a control cabinet equipped with an integrated control and operating panel. A vertical spindle with chuck reliably clamps each test component during the inspection process. Non-conforming (NOK) parts identified during testing are automatically discharged to one of two designated NOK storage conveyors. Separate storage locations for reference and master parts facilitate calibration and ongoing quality assurance during operation. The system also incorporates the ibg Optical Reflection Sensor (iORS), enabling precise, non-contact inspection of rings. Nljdpfx Amoyx E D Ejyed

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 240 kg, total length: 1,213 mm, total width: 804 mm, total height: 1,856 mm, The ibg eddyrobot is a modular, semi-automatic system for eddy current crack and grinder burn detection. Equipped with the eddyvisor C and supporting up to four interchangeable ET probes, it delivers industrial-grade accuracy and flexibility. Its compact and mobile design makes it ideal for use on production floors, in laboratories, or for standalone inspection tasks. Nlodpfx Amoy H Dfdsyed Key safety features include an electromechanical lock and emergency stop to ensure operator protection. The user-friendly interface enables straightforward operation, while the integrated ibg eddyvisor C with differential crack test probe provides precise and reliable inspection results. The system also features a flexible probe station that stores up to four ET probes, allowing for automatic probe changes via the robotic arm. At the core of the system is a Mecademic Meca 500 six-axis industrial robot featuring ±5 µm repeatability, ensuring consistent and repeatable test procedures. The entire unit is managed by a Beckhoff PLC. For mobility, the eddyrobot is mounted on 100 mm rubber wheels (two of which are lockable), and includes a handle and corner protection. Its compact footprint allows easy passage through standard doorways. For more information, please visit our website.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer for sale a Bonded Panel Technology LTD (Duemas) Lamella Cutting System for mineral wool boards, complete with extraction unit, manufactured in 2014 and in very good technical condition. Njdpfx Ajyk Dmnemyjld This equipment is engineered for precise cutting of mineral wool boards into lamellas with adjustable thicknesses from 40 mm to 200 mm, making it ideal for sandwich panel and insulation material producers. The system comprises: - Lamella saw with 35 Ø550 mm blades (15 new blades in original packaging) - Two 3-meter gravity conveyors - Additional main shaft (2 shafts in total) - Complete set of spacers and top boards for 40, 50, 60, 80, 100, 120, 150, and 200 mm - Complete dust extraction system with 15 kW Auto Shaker filter - Full ductwork and connection components Main technical data: - Maximum slab width: 1010 mm - Maximum slab thickness: 200 mm - Main motor: 15 kW - Power supply: 415V, three-phase - Approx. 3,000 operating hours (2014–2019) This equipment has been well maintained and is in very good working condition. Immediate availability.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. Nsdpfx Asma Azdemyeld • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. Nlodpjma A Hujfx Amysd • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture Nedpsmdq Thjfx Amyeld • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES. Nlsdpfx Amjma Dd Ijyod

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. Nsdpfx Amema Azljyjld • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 4.5 m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Nsdema Aztepfx Amyeld Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser Nledpfx Amoma Dfajysd QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Do you cut hardened or stainless steels on a cheap abrasive saw? Upgrade your production to a high-safety, PLC controlled, industrial hot saw. S200 is a semi-automatic abrasive (hot) cutting system designed for cutting stainless and hardened steels, as well as matrix-type materials like rubbers, threads, carbon fibre, which require high RPM cutting. Suitable for single or (bundled) multiple tubes cutting at once. Full pneumatic liftable guard (including tunnels 900 mm either side) preventing saw access and safely capturing all sparks from the cutting process. Opening and closing of the guard with a press of a button for a full unimpeded saw table access with safety switch disabling the saw on lifting of the guard. Saw cooling by forced air circulation and convection design. Optional vacuum extraction system for dust collection. • Ø200 mm abrasive cutting disc with 1.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw Njdpomcbk Usfx Amyjld • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • Precision machined and balanced high-RPM spindle and drive unit • Precision 90° cuts with smooth performance and long service life. • 2x vertical clamps with adjustable clamp pressure • Adjustable feed control of up / down cutting cycle. • Rapid blade changeover system minimising time. • Air gun and LED interior light • 1× Ø100 mm attachment points for dust collection • Optional 2.2 kW vacuum extractor Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture