Used Järme Oy 11 Pockets for sale (13,308)

Year of construction: 2003, condition: good (used), Sorting line with 11 pockets Rjdpfx Ansxuh Sbj Ajt

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: Rodpeu Tg I Djfx An Ast New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), Year of construction: 2005, Log turner Tähkä, infeed-outfeed conveyors, log correction hydraulic crane Loglift 105 Redjy Dpmhjpfx An Ast

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Redpjyl Tr Nsfx An Ajt Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details.

Condition: excellent (used), For sale: professional portable surface roughness tester Mitutoyo SJ-210 manufacturer code: 178-560-01D drive: 0.75 mN Made in Japan Device for precise measurement of surface roughness according to ISO 1997. Condition: Used, in very good technical and visual condition. Fully functional. Display without any damage. Complete set as shown in the photos. Included: – SJ-210 measurement unit Redpsyc Rwdsfx An Ast – standard drive attachment – Mitutoyo 178-601 reference specimen – power supply – cables – original carrying case – original packaging The device measures, among others: Ra Rz parameters compliant with ISO standards Ideal for: – quality control – CNC companies – tool shops – technical departments – measurement laboratories Industrial-grade equipment – this is not a budget laboratory version.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 13,500 kg, load capacity per storage section: 1,500 kg, total length: 34,000 mm, total height: 4,500 mm, load per truss pair (max.): 4,500 kg, number of shelf rows: 3, frame height: 4,500 mm, pallet spaces: 117 euro pallets, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 34,000 mm, support length: 2,700 mm, HEAVY DUTY PALLET RACKS 3 rows of pallet racks Each 11.3 m long, 4.5 m high, 1.1 m deep, Each with 4 bays, 2.7 m wide, Shelf load: 4,500 kg! Bay load: 13,500 kg! - 15 frames (RH4511) RAL5019 - 30 base plates, shims, fastening materials - 60 floor anchors (ZZBA1210) - 54 single beams (T27155!) RAL2008 - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 26 working days after payment received - Delivery to construction site / installation site included - Unloading from truck to be carried out by purchaser with own lifting equipment. - Deliveries to all areas of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement. Redoyy Unijpfx An Aet

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Rjdeyubcnopfx An Aet Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: new, For sale: brand new KSB Etanorm SYT 50-32-250 centrifugal pump, supplied complete with 11 kW motor, mounted on a robust steel frame. Redpfxjyt Ikpo An Aot The unit is factory new, year of manufacture 2023, from the renowned German manufacturer KSB – Made in Germany. The pump comes from surplus stock and has never been installed or used. KSB Etanorm series pumps are among the most widely used industrial pumps for applications such as: • Industrial systems • Process engineering • District heating • Industrial water installations • Cooling systems • HVAC installations Robust construction and high-quality workmanship. Technical Data • Manufacturer: KSB • Model: Etanorm SYT 50-32-250 • Type: ETNY050-032-250 SG DB08LD20110 • Year of manufacture: 2023 • Flow rate: Q 11 m³/h • Head: H 74 m • Impeller diameter: Ø 229 mm • Rotational speed: 2977 rpm Motor • Power: 11 kW • Power supply: 380 / 400 / 415 V • Speed: approx. 2950 rpm • Protection class: IP55 • Insulation class: F The pump is mounted on a robust steel transport base.

Condition: used, lifting height: 9,000 mm, Year of construction: 2021, operating hours: 1,656 h, load capacity: 3,498 kg, Equipment: air conditioning, cabin, JCB 535-95 Year of manufacture: 2021 1,656 operating hours Air conditioning (AC) 110 HP Joystick control 3 hydraulic circuits 3 steering modes – front wheel, crab steering, all-wheel steering 3.5 t lifting capacity 9.5 m lifting height Price: €53,900 net Available at extra cost: Earth bucket €1,490 net Light material bucket 2 m³ €1,950 net Redpoyq A Sijfx An Ajt Light material bucket 2.7 m³ €2,150 net Light material bucket 3 m³ €2,250 net Light material bucket with double wear blade (reversible edge) 2 m³ €2,250 net Light material bucket with double wear blade (reversible edge) 2.7 m³ €2,450 net Light material bucket with double wear blade (reversible edge) 3 m³ €2,550 net For JCB or Manitou, Claas, Merlo Work platform small, 1.2 m wide €990 net Work platform large, 2 m wide €1,549 net Inspection possible at any time by prior telephone arrangement. All details are without guarantee.

Condition: used, Lumber Packaging Line • Automatic Unloading Elevator • Automatic Stacker Redpfxsywb Abj An Aet • Automatic Sticker (Stick Placing Machine)

Condition: used, Year of construction: 2001, TECHNOLOGICAL LINE FOR MANUFACTURING ROOFING ELEMENTS 1. Profiling machine 2. Insulation element production system 3. AL foil preparation system 4. Gluing system 5. Auxiliary components, technical documentation, certificates Rodpfxjyv E Ais An Ajt Types of roofing panels produced on the technological line: - Roofing panels with modular dimensions 1100 mm x 1070 mm - Roofing panels with half-module dimensions 550 x 1070 mm - Roofing panels without anti-condensation layer in various lengths (up to 6 m)

Condition: ready for operation (used), Year of construction: 1981, machine/vehicle number: S 659, functionality: fully functional, fully functional in good condition Rjdpfx Aeyr E Shsn Aet

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Rjdsxbd U Eepfx An Ajt

Condition: used, Year of construction: 2016, functionality: fully functional, 2000 kVA oil-hermetic transformer, SGB, year 2016, 11kV ± 2x2.5%/400V, HV plug-in bushings, full hermetic protection, rollers, test report Rodoxvqp Sspfx An Aet

Condition: used, Toyota BT Quick Lift pallet truck 2300kg 1150 mm RA2231 Manufacturer: Toyota Fork length: 1150 mm Rsdjvap Rtepfx An Ast Fork width: 156 mm Carrying surface width: 520 mm Maximum load capacity: 2300 kg Lifting range: 85 - 200 mm With quick lift, 2x pumping is sufficient to be off the ground, with a maximum load of 150 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Gear motor Flender MBH 125CC-B 27.7/1 Helical bevel geared motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Suitable frequency inverters Walther Flender ZZ0103069.34003 Sinus Penta available Altogether 15 geared motors and 12 pieces frequency inverters available !!! Redpfxok E Htce An Ast Very good condition, directly from production!!!

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY CAPACITY 11 TONS PER HOUR FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7 Rodpfx Aov Tl D Njn Aet

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,839 h, load capacity: 2,500 kg, lifting height: 3,700 mm, fuel type: gas, mast type: duplex, construction height: 2,230 mm, gearing type: automatic, empty load weight: 3,872 kg, total height: 2,230 mm, total length: 2,430 mm, total width: 1,150 mm, Equipment: cabin, sideshift, 11138 TOYOTA 8FGCU25 No left cab door Specification: Forklift type: LPG Stock number: 11138 Manufacturer: TOYOTA Model: 8FGCU25 Year: 2015 Lifting capacity, kg: 2500 Mast type: Duplex Lifting height, mm: 3700 Drive type: Automatic Operating hours: 8839 Country: USA Weight (kg): 3872 Dimensions (L x W x H), mm: 2430 x 1150 x 2230 Redpfjylmkfox An Ajt Overall height, mm: 2230 Forklift equipment: Sideshift, Cabin Note: The forklift has been inspected – technically sound. A full service will be carried out before delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 2,787 h, load capacity: 2,000 kg, lifting height: 3,500 mm, fuel type: gas, mast type: duplex, construction height: 2,270 mm, gearing type: automatic, empty load weight: 3,550 kg, total height: 2,270 mm, total length: 2,600 mm, total width: 1,150 mm, Equipment: sideshift, Specification: Forklift type: LPG Item code: 11121 Manufacturer: TOYOTA Model: 02-8FGF20 Year: 2016 Lifting capacity, kg: 2000 Mast type: Duplex Lifting height, mm: 3500 Drive type: Automatic Operating hours: 2787 Country: Japan Weight (kg): 3550 Rjdeylmgyjpfx An Ast Dimensions (L x W x H, mm): 2600 x 1150 x 2270 Construction height, mm: 2270 Forklift attachments: Side-shift

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15-20 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. This machine is a flexible and efficient automatic board feeder developed for pallet production machines, but also well suited for other applications within the wood industry. The machine is specifically designed to integrate with both deck nailing machines and leg nailing machines, regardless of brand or capacity. Rsdpeyk Tlgjfx An Aet We have supplied automatic board feeding systems to nailing machines from, among others, Cape, Corali, Storti, IMH, IM Hart, Viking and Mychrome. Thanks to the reliable vacuum system and the simple maintenance-free one-piece feeder – based on our own patented solution developed more than 40 years ago – only minimal adjustments are required when changing dimensions. This results in short changeover times and high operational reliability. The machine equipment also includes a tilting package lift that tilts the package approximately 10 degrees. This ensures that the boards remain stable and do not fall apart when the straps are removed, even if the boards are not perfectly aligned in the package. As optional equipment, the system can be complemented with: - Automatic turner - Vision/Camera system - Automatic removal of sticks between board layers The end result with this type of feeders is a reliable and flexible high-quality solution that enables more productive and cost-efficient pallet manufacturing. Material dimension of a standard machine: Board length: 600-1600mm, board width: 60-150mm, board thickness: 16-32mm Package length: 800-1600mm (packages with boards shorter than 800 should be on a EUR-pallet), package width 800-1200mm, package height: 0-1400mm Feeding capacity: 50 boards/min (with board width 100mm) Machine dimensions (LxWxH): 4300x3700x2800mm The machines is CE-marked. Do not hesitate to contact us for more information, pictures and videos.

Condition: good (used), overall dimensions 1800x1300x2250 mm; hydraulic; unloading to a height of 860 mm; power supply 400 V, 50 Hz; power 2.2 kW; for unloading pallet boxes 1200x1000x760 mm. and 200 ltr. trolleys; weight 350 kg. Rodpfsvc A Spox An Ast

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h Rsdpfx Ansvvcqxj Aet extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. LNM-355 is a flexible, compact and very efficient pneumatic nailing machine for manufacturing legs for pallet production. User-friendly program, which means the changeover takes place very quickly and the machine can save settings for over 100 different legs. Five pneumatic nail guns with magazines for jumbo coils equipped with nail indicators. Possible to produce legs with 2-5 blocks/leg. Possible to nail 1-9 nail in each nail pattern. Equipped with large cassette for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Manual or automatic adjustment for block positions. Big buffer for finished legs. Rodew R Sl Sepfx An Aot The machine can be equipped with an optimized block cutter, automatic block feeding, automatic board feeding and automatic leg stacking. Material dimensions for a standard machine: - Boards: Length 500-3500mm, Width 60-150mm, Height 16-32mm - Blocks: Length 60-150mm, Width 60-150mm, Height 50-125mm Capacity: - 35 blocks/min Machine dimensions: - Length 3800mm, Width 5200mm, Height 2000mm The machines is CE-marked. Do not hesitate to contact us for more information, pictures and videos.

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes LNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing legs for pallet production. User-friendly program, which means the changeover takes place very quickly and the machine can save settings for over 100 different legs. Three Bostitch nail guns with magazines for jumbo coils equipped with indicators. Possible to produce legs with 2-30 blocks/leg. Equipped with large cassette for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. The machine can be equipped with an optimized block cutter, as well as automatic block feeding into the nailing machine. The block cutter can be mounted on the back side of the nailing machine or on the side. Dimensions for standard machine: Rodpfx Anji Hkqmo Ajt - Boards: Length 600-3500mm, Width 60-125mm, Height 16-28mm - Blocks: Length 60-150mm, Width 60-125mm, Height 50-100mm Capacity: - 21 blocks/min Machine dimensions (without block cutter): - Length 9000mm, Width 1000mm, Height 1900mm The machines is CE-marked. The leg nailing machine can also be equipped with automatic stacker for finished legs. Do not hesitate to contact us for more information, pictures and videos.

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Rodoh Dpv Hjpfx An Aet DNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing deck or stringer pallets (2-way pallets). Motorized conversion for stringer channels. User-friendly program, which means that the changeover takes place very quickly and the machine can save settings for over 100 different decks and pallets. Bostitch nail guns that are equipped with nail magazines for jumbo coils with indicators. Opportunities for manufacturing asymmetrical decks/stringer pallets. Equipped with flexible cassettes for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Dimensions for standard machine: - Deck board: Length 600-3500mm, Width 75-125mm, Height 16-50mm - Stringer: Length 600-1500mm, Width 50-125mm, Height 16-100mm - Deck/Stringer pallet size: Length 600-3500mm, Width 600-1500mm Capacity: - 3 Deck/min (With 5 deck boards) Machine dimensions: - Length 5000mm, Width 4400mm, Height 1900mm The machines is CE-marked. The machine can be equipped with automatic board feeding and deck/pallet stacking. For more information, pictures or videos take contact.