Used Ixsa X8 5000 Cykli Ładowania for sale (2,555)

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 650 mm, area performance: 3,300 m²/h, warranty duration: 24 months, tank capacity: 85 l, total height: 1,170 mm, total width: 660 mm, total length: 1,300 mm, water tank capacity: 95 l, empty load weight: 229 kg, We offer for sale a brand new IXSA X8 Ride-On Scrubber Dryer. Device warranty: 24 months Battery warranty: 60 months Technical Specifications: • Working width: 650 mm • Productivity: 3,300 m²/h • Brush diameter (quantity): 330 mm (2) • Squeegee width: 1,020 mm • Recovery tank: 95 l • Solution tank: 85 l • Rated power: 1,350 W Ncsdpfxsx U T E Ns Afajr • Maximum slope: 10% • Vacuum motor power: 24V / 500W • Brush motor power: 24V / 2x300 W • Maximum speed: 8 km/h • Brush pressure: 2.8 MPa • Brush speed: 180 rpm • Pad diameter: 13'' • Vacuum: 188 mbar • Noise level (EN 60704): 63 dB(A) • Dimensions (L x W x H): 1,300 x 660 x 1,170 mm • Weight (without battery): 229 kg • Lifepo4 batteries: 24V 200Ah. Working time: approx. 7 h • Batteries can be opportunity-charged Standard equipment for the scrubber dryers offered includes: • Neodymium disc brushes – magnetically mounted • Pad holder • LifePro batteries with extended cycle life and longer runtime compared to standard gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – minimal electronic components for increased reliability and long service life ✅ 5-year lithium-ion battery warranty – exceptional in the industry, confirming top durability and reliability ✅ Significantly higher charge cycle count vs. gel batteries (700 vs. 5,000 cycles) and longer runtime – IXSA batteries offer more efficient operation and lower replacement costs in the long term ✅ Magnet-mounted brushes – quick and easy installation/removal ✅ Long battery runtime with short charging times ✅ Premium quality American LINATEX squeegee blades ✅ Dual suction system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – state-of-the-art technology for better cleaning performance and longer service life ✅ High surface efficiency – saving time and reducing operating costs ✅ Robust construction, low operating costs – built for intensive, professional use ✅ Ergonomic, intuitive operation – user-friendly design and controls

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 760 mm, area performance: 4,000 m²/h, warranty duration: 24 months, tank capacity: 120 l, total height: 1,258 mm, total width: 834 mm, total length: 1,458 mm, water tank capacity: 130 l, operating speed: 8 mm/s, We offer for sale a new Ride-On Scrubber Dryer IXSA X9 with seat Device warranty – 24 months Battery warranty – 60 months Technical Data: • Working width: 760 mm • Machine performance: 4000 m²/h • Brush diameter (quantity): 380 mm (2) • Squeegee width: 1020 mm • Recovery tank capacity: 130 l • Solution tank capacity: 120 l • Rated power: 2100 W • Maximum gradient: 10% • Vacuum motor power: 24 V / 550 W • Brush motor power: 24 V / 2 x 550 W • Maximum speed: 8 km/h • Brush pressure: 3.5 MPa • Brush speed: 180 rpm • Pad width: 13" • Vacuum: 188 mbar • Noise level (EN 60704): 65 dB(A) • Machine dimensions (L/W/H): 1458 x 834 x 1258 mm • Machine weight (without battery): 248 kg Ncedpfx Asyaafljfaer • Lifepo4 Batteries: 25.6V 200Ah – operating time approx. 5 h • Lifepo4 Batteries: 25.6V 300Ah – operating time approx. 7 h • Possibility of opportunity charging Standard equipment for the scrubber dryers offered includes: • Neodymium disc brushes – magnet-mounted • Pad holder • LifePro extended-cycle batteries for longer run time compared to standard gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – minimal electronics ensure extended trouble-free operation ✅ 5-year warranty on lithium-ion batteries – an industry-leading guarantee of durability and reliability ✅ Greater number of charge cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating life – IXSA batteries offer greater efficiency and reduced long-term replacement costs ✅ Magnet-mounted brushes – easy installation and removal ✅ Long battery runtime with short charging time ✅ Highest quality American LINATEX squeegee blades ✅ Double vacuum system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – modern technology for better results and extended brush life ✅ High surface area performance – saves time and labour costs ✅ Robust construction and low operating costs – ideal for intensive, professional use ✅ Ergonomic and intuitive operation – user comfort and easy handling

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 530 mm, area performance: 3,000 m²/h, warranty duration: 24 months, tank capacity: 60 l, total height: 1,090 mm, total width: 550 mm, total length: 1,270 mm, water tank capacity: 65 l, empty load weight: 154 kg, We offer for sale a New Scrubber-Dryer with traction – IXSA Model X7T Device warranty – 24 months Battery warranty – 60 months Technical specifications: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 × W550 × H1090 mm • Solution / recovery tank capacity: 60/65 L • Vacuum motor: 370 W • Brush motor: 500 W • Cleaning capacity: 3000 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time – approx. 4h (2h to 80%) • Battery operating time – approx. 4h • Battery lifespan – 5000 cycles • Option for opportunity charging Standard equipment included with the listed scrubber-dryer: • Neodymium disc brushes – magnetic mounting • Pad holder • LifePro batteries offering extended cycle life and longer runtime compared to standard Gel batteries • Charger • Linatex squeegee blades Why choose IXSA? ✅ Durability – minimal electronics used in the device ensures extended reliability and reduced risk of failure Ncedpfxox U Ty He Afasr ✅ 5-year warranty on lithium-ion batteries – unmatched in the industry, confirming highest durability and reliability ✅ Greater number of charge cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating time – IXSA batteries allow for more efficient use and lower long-term replacement costs ✅ Magnetically mounted brush – easy installation and removal ✅ Long operating time with short charging cycles ✅ Highest quality American LINATEX squeegee blades ✅ Dual vacuum system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – advanced technology for superior cleaning results and longer lifespan ✅ High surface productivity – saves time and reduces operational costs ✅ Robust construction, low maintenance costs – equipment designed for intensive, professional use ✅ Ergonomic and intuitive operation – user comfort and straightforward controls

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 530 mm, area performance: 2,500 m²/h, warranty duration: 24 months, tank capacity: 52 l, total height: 1,090 mm, total width: 550 mm, total length: 1,270 mm, water tank capacity: 48 l, empty load weight: 154 kg, We offer for sale a New IXSA X6 Scrubber-Dryer. Warranty on the machine – 24 months Warranty on batteries – 60 months Technical data: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 x W550 x H1090 mm • Solution / recovery tank capacity: 48 / 52 L • Vacuum motor: 370 W • Brush motor: 500 W • Productivity: 2,500 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time – approx. 4 h (80% charge in 2 h) • Battery runtime – approx. 4 h • Battery life – 5,000 cycles • Battery can be recharged at any cycle Standard equipment included with the scrubber-dryer: • Neodymium disc brushes – magnet-mounted • Pad holder Njdpfx Afex U Tvueaecr • LifePro batteries featuring increased cycle count and longer runtime compared to standard Gel batteries • Charger • Squeegee blades made of Linatex material Why choose IXSA? ✅ Durability – minimal electronic components for extended trouble-free operation ✅ 5-year warranty on lithium-ion batteries – unique in the industry, confirming highest durability and reliability ✅ Significantly higher charging cycles compared to gel batteries (5,000 vs. 700 cycles) and longer operating times – IXSA batteries provide more efficient use and lower long-term replacement costs ✅ Magnetic brush mounting – easy to install and remove ✅ Long battery runtime with short charging times ✅ Top-quality American LINATEX squeegee blades ✅ Dual suction system – leaves floors perfectly dry immediately after cleaning ✅ Neodymium brushes – modern technology for superior cleaning results and longer lifetime ✅ High productivity – save time and reduce operating costs ✅ Sturdy construction, low operating costs – suitable for intensive, professional applications ✅ Ergonomic and intuitive operation – user comfort with simple controls

Condition: excellent (used), For sale: Professional WNT tool holder SK40 Ø12x80 capable of operation up to 25,000 rpm (balanced to G2.5). The holder comes complete with a ventilated drill – ideal for machining with internal cooling. Excellent condition, the tool has been tested and is ready for use. Top-class equipment, designed for precision machining on CNC centers. Nsdsw Rrw Uepfx Afajcr

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. Nsdoy Ehnaspfx Afascr The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing Nedpfxsyc H N Ns Afaecr • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,700 h, load capacity: 5,000 kg, lifting height: 8,300 mm, free lift: 2,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,800 mm, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16x7x10 1/2, rear tire type: superelastic tires (black), rear tire size: 27/10-12, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, seat heater, 🔍 Looking for a reliable forklift? We are industry specialists! 💼🚜 We specialize in selling high-quality forklifts, offering thoroughly inspected machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your company! 📦 This listing features: COMBILIFT C5000E – TRIPLEX 8300mm – Year 2013 – 🔌 ELECTRIC – FULL FREE LIFT – FORK SIDESHIFT – WIDE POSITIONER – ✅ CONDITION 5/5 🔧 The forklift is in excellent technical condition, ready for immediate use. 📊 Key Features and Technical Specifications: 🆔 Model: COMBILIFT C5000E 📅 Year of Manufacture: 06/2013 🏋️ Lifting Capacity: 5000 kg Njdpfx Afoy Eq Dbjascr 🏗️ Mast Type: Triplex 📏 Lifting Height: 8300 mm 🔌 Drive Type: Electric ⚙️ Load Center: 600 mm ⚖️ Total Weight: 7500 kg ⬆️ Free Lift Height: 2500 mm 🛞 Tyres: Solid, superelastic, good condition 🔘 Front Tyres: 16x7x10 1/2 – 100% TREAD 🔘 Rear Tyre: 27/10-12 – 100% TREAD 📐 Collapsed Mast Height: 3800 mm 🔍 Technical Condition: Fully functional, after service check 👀 Visual Condition: Very good 🔩 Fork Length: 1200 mm 📏 Overall Height: 2600 mm 📏 Overall Length: 2500 mm 📏 Overall Width: 2600 mm 📏 Positioner Width: 3100 mm 📞 Contact us today and let's move your business forward! 🚛📦

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Welding turntable, L-manipulator, positioner, in excellent condition, includes additional clamping plate. Rotating and tilting (overhead), steplessly adjustable speed. Mechanical height adjustment from 800 mm to 1100 mm. Outreach 1000 mm. Overall height 1800 mm. Length 3000 mm. Width 1100 mm. Clamping plate diameter 1000 mm. Nsdpeylkn Iefx Afaocr

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. Nsdpfsvu Syyex Afaocr TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: excellent (used), Year of construction: 2009, Mobile coil trolley FORSTNER AG 5000 b2mf 1500 Maximum roll width 1500 mm Load capacity 5000 kg Inner diameter 360 - 630 mm Outer diameter 1100 mm With 4-arm spindle Double bearing decoiler with handbrake and steel wheels for movement Ncedpfx Asmv Hv Ajfaor

Condition: good (used), Stainless steel tank 5000 L with mixer, cooling. In good condition They have a built-in pipe around the tank that can cool Ncjdpjvr E N Nefx Afajr

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. Nsdpfxjwbh Ife Afajcr ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Nedpfx Ajwbil Ssfajcr Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Ncjdew Eilyepfx Afaer Press brake: TruBend 5230 Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: used, Year of construction: 2017, machine/vehicle number: LC611, Used Tetra pak UHT system 5000 LPHTechnical Specifications & Performance DataThis Tetra Pak UHT System Steritherm (model VTIS C-4) is a robust, second hand processing unit designed to deliver consistent ultra-high temperature treatment for beverage production and industrial packaging workflows. Engineered for high reliability and easy integration with downstream filling and bottling equipment, it provides stable thermal performance and hygienic operation for modern beverage production lines.Manufacturer: Tetra PakModel: VTIS C-4 SterithermManufacturing year: 2017Capacity: 5000 L/hMax process temperature (indicative): up to 148 °C (per inspected pressure section)Included equipment: Alfa Laval SHL-20 homogenizer (250 bar), Alfa Laval H7-RC plate heat exchanger (198 L), pump station with Alfa Laval LKH-10 and LKH-107, ABB drive, and CIP regulatorDesign intent: Continuous UHT treatment with integrated homogenization and plate heat exchangeConstruction: Hygienic stainless steel process componentsAdvanced Automation & Control SystemsThe system includes a computer control system for precise process management, delivering stable time–temperature profiles and consistent product quality. Automated supervision of key parameters helps reduce product losses and optimizes energy usage. Interlocks and instrumentation support safe operation throughout heating, holding, and cooling stages.Centralized computer control for process sequencing and alarmsIntegrated CIP regulator to streamline cleaning proceduresProcess instrumentation for pressure, temperature, and flow controlComponent-level CE marking on included Alfa Laval equipmentProduction Line Integration CapabilitiesDesigned to fit seamlessly into a used bottling line or new production layouts, this UHT system interfaces smoothly with upstream raw product handling and downstream filling and packaging machinery. It supports industrial packaging workflows for PET and Glass bottling operations by supplying thermally treated product to fillers.Inline compatibility with fillers, buffer tanks, and conveyorsIdeal for beverage production environments needing continuous 5000 L/h throughputFlexible process connections for integration with existing piping and CIP loopsSuitable for second hand upgrades or capacity expansionsMachine Condition & Maintenance HistoryThis unit is presented as a ready-to-run, second hand UHT system. Ancillary components show evidence of professional upkeep, including a recent service marking on the Alfa Laval pump (dated 04/24) and inspection records on pressure-rated parts.Operational status: ready for operationInspection labeling present on pressure sectionsService marking observed on included pump componentOperational Performance & VersatilityEngineered for consistent UHT processing, the line’s Steritherm design supports stable thermal treatment, homogenization for product consistency, and effici... Njdpsy Ef T Tofx Afajcr

Year of construction: 2008, condition: excellent (used), machine/vehicle number: 080700467, Counter (m): 0.84 Format (mm): min. 120 x 148 (option 105 x 148) // max. to 350 x 500 Paper weight: 40 - 300 g/m² Equipment / Additional information: Hohner stitching heads Consist of: -Slitter Cutter Creaser -Inline Bookletmaker DBM 5000 Nedpfx Aohbu Tusfaecr -Auto Spine Master -DBM -500T

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Njdpfjr Nfvmex Afascr Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: used, Year of construction: 2008, The Fischer milk pasteuriser 5000 is an industrial-grade machine designed for pasteurizing milk on a large scale. Here are some details about such a pasteuriser: - Capacity: The "5000" typically indicates that this pasteuriser can handle up to 5000 litres of milk per batch, making it suitable for large dairy processing operations. - Functionality: The pasteuriser is designed to heat milk to a specific temperature, holding it there for a required amount of time to eliminate harmful bacteria and pathogens while preserving the milk's quality and nutritional value. - Construction: Fischer machines are commonly made from stainless steel, ensuring hygiene and durability. The materials used are designed to withstand high temperatures and pressures encountered during the pasteurization process. - Design: It often features an insulated design for energy efficiency and may include a user-friendly control panel for monitoring and adjusting the pasteurisation parameters. - Efficiency: The pasteurising process is usually continuous, allowing for high throughput, which is essential for commercial operations to meet demand. - Temperature Control: It may include advanced temperature control systems to ensure precise pasteurization, which is crucial for product safety and quality. - Safety Features: Modern pasteurisers often come with safety mechanisms to prevent overheating or pressure build-up, ensuring safe operations. - Applications: Suitable for dairy farms, creameries, and food manufacturers looking to process large quantities of milk while adhering to health and safety regulations. Capacity: 5000 Litres per hour Temperatures: 4-55-65-78(90) - 55-65-4 c Stages exchange plates : 5 Outlets: Separator / Homogeniser / De Aerator / Holding Tube DeAerator: Included Nodjx Tdauepfx Afaocr Heated: Steam with Heat Exchanger and Steam Valve Positioning Balance Tabk: Included Chart recorder: In control panel Control Panel: Included Divert Valve: Included Product Pump: Included Skid Mounted: On Stainless steel Skid Hot water Pump: Included Electrical Requirements: 3 phase 400 V / 50/60 hz Cooling: Connection with old water connection Condition: Still in use Available: 3 weeks from order

Condition: new, functionality: fully functional, overall weight: 5,800 kg, total length: 5,000 mm, total width: 1,250 mm, total height: 650 mm, Year of construction: 2025, fork length: 5,000 mm, load capacity: 5,000 kg, Transport carriage 1250 x 5000 mm with payload 5000 kg Tires bandages wheel Steering is a slewing ring with fork tine holder Nodpfxsv Hnnks Afajcr Side stanchions optional Support feet on the front for setting down the carriage

Condition: ready for operation (used), functionality: fully functional, The Tecno Fluss VM 5000, manufactured in 2003 and identified by serial number 913, is an ideal solution for automating the dispensing of liquid or semi-solid products. This versatile model facilitates the precise dosing of various creams, sauces, and pastes. Furthermore, its ergonomic design reduces manual intervention, thereby increasing production rates. Furthermore, the intuitive operation of the Tecno Fluss VM 5000 allows operators to easily adjust parameters, ensuring a consistent flow. Each portion remains uniform, even at high production rates. Furthermore, the use of stainless steel components enhances its robustness and simplifies maintenance. As a result, this machine helps reduce the risk of contamination while extending its lifespan. Furthermore, the robustness of this dispenser meets the rigorous standards of the food industry. In addition, its compact design facilitates its integration, whether in a confined space or within a complete production line. In short, the Tecno Fluss VM 5000 represents a strategic investment to improve dosing accuracy, increase productivity, and reduce operational costs. This ensures consistent quality and significant time savings in your manufacturing processes. Technical specifications: Adjustable production speed to accommodate high throughput Ncsdpfowdv Rysx Afaer Stainless steel construction to maintain optimal hygiene Intuitive control for simplified use Dosing system suitable for liquid and semi-solid products Estimated power: approximately 3 kW depending on configuration OWYSnISl

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm Nedpsy Erkrjfx Afajcr 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications Njdpsy Erizjfx Afaecr What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg Ncedpfx Asygxy Ujfaor max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: good (used), End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: 75 x 75H Sp 5000 KHSS-E 75x75x27 -Hole: Ø 27 mm -Cutting material: HSS-E Nodpsy A Embjfx Afaocr -Price/Fee: complete -Transport dimensions: 150/75/H75 mm -Weight: 2.9 kg