Used Itec Automation & Laser Ag 3-Achs Laser Trumpf- Motomann -Coil for sale (86,639)

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. Fedpfezyzzyox Ak Ujpl The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each - Up to 4 welding fixtures Fsdpfx Akowm I H So Uspl - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. - Inline laser monitoring system for weld seam monitoring - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) 2 components per side of the table approx. 250 parts per hour T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Fpjdpfx Aew A Iilok Uol Net weight 8500 kg

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037809, empty load weight: 7,722 kg, maximum load weight: 31,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: white, Archive photos shown. Vehicle may still be in operation. Fliegl Coil Curtainsider Semi-Trailer Chassis: Approx. 8,040 mm reinforced coil well with coil cover, 8 removable coil posts, 4 pairs of internal coil pockets, 1 pair of lashing adapters for coil posts, 4 pairs of removable 6 t Vario-Lash lashing rings, 7 pairs of 5 t lashing rings in the outer frame, 9 pairs of 5 t lashing rings in the coil well, 1 pair of 5 t lashing points in the longitudinal beam, pallet box for 8 Euro pallets, heavy-duty pallet stops with lashing points, spare wheel carrier, 2 lockable plastic toolboxes, galvanized rear forklift mounting bracket, 5 pairs of outer stake pockets and 3 centre stake pockets compatible with coil stakes. Axles & Suspension: SAF disc brake axles, laser-aligned axle geometry for reduced tyre wear and fuel consumption, TIS automatic tyre inflation and pressure monitoring system, air suspension, automatic lift axle with forced lowering, traction aid and electric truck control. Braking System: Dual-line air brake system with colour-coded air lines, aluminium air tank, spring parking brake, raise/lower valve with auto-reset, AAC Basic automatic unloading axle (manoeuvring aid up to 20 km/h), WABCO SmartBoard displaying axle loads, mileage and diagnostic messages, axle load monitoring via EBS CAN bus. Wheels & Tyres: 435/50 R19.5 tyres with polished aluminium wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables), 2 × 7-pin rear sockets for truck-mounted forklift. Floor: Approx. 30 mm plywood floor for forklift axle loads up to 5,600 kg. Front Wall: Front bulkhead with two pairs of lashing rings and integrated storage compartment accessible from inside. Side Posts: 3 pairs of sliding posts, 5 post positions, 6 widening adapters (+25 mm each). Load Securing: 7 rows of aluminium side slats, 1 pair of Vario steel slats and 1 Vario locking beam for front and rear load securing. Fjdpfx Ajzl D Iyjk Uspl Roof: Fliegl Blitz sliding roof, Anti-Ice system with central air hose and automatic venting via brake light signal, Fliegl Easy Fix system with 12 pairs of strap holders integrated into the roof bows, EcoLift lifting roof (approx. 380 mm).

Condition: like new (used), Year of construction: 2017, 1.0 unit used IML system – system with removal unit, placement on conveyor belt for horizontal stacking Manufacturer: Beck Automation AG Type: B32 Year of manufacture: 2019 Fodpjwuln Nefx Ak Ujpl

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile Fedpfjv Awgusx Ak Uopl - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, sheet thickness (max.): 20 mm, input voltage: 400 V, type of input current: AC, Input voltage: 400V AC Frequency: 50Hz Connected load: 88kVA Control voltage: 24V DC Required fuse protection: 3x160A Laser power: 4,000W Compressed air connection: 7-10bar Nitrogen connection N2: 30bar Oxygen connection O2: 20bar Max. component size: 4,000x2,000x20mm Fpodpfx Aksycwwdj Usl Additional equipment: FEZER Maschinenfabrig GmbH – vacuum lifter V03004 (year: 03/99) STOPA Anlagenbau GmbH & CoKG – loading storage system – 084997 (load capacity: 3,000kg, year: 2008, sheet format: 2x4m, storage capacity: 30t, storage height: 5.36m, storage positions: 10) Overhead crane Loading and unloading stations

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Fsdpfjxxa Ucox Ak Uepl

Condition: new, Year of construction: 2025, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Cutting area 6000 × 1500 mm X‑axis travel 1520 mm Y‑axis travel 6020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L × W × H) 14500 × 2300 × 2380 mm Floor footprint 15500 × 2800 mm Net weight 6000 kg Fpedpfxew A Ik Ne Ak Uol Fully automatic cutting, material saving, fast speed

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 32,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Save on transport costs! Upon request, up to three curtainsider trailers can be delivered as a space-saving 3-unit stack. Roof and side curtains are supplied separately and can be easily installed after delivery. Benefit from significantly reduced transport costs. Customized transport solution Configure your Fliegl trailer according to your requirements. The shown vehicle is an example only. Production and equipment are customized according to customer specifications. #Chassis Fine-grain steel welded construction with "Preload" neck area reinforcement Fifth wheel plate with replaceable 2" kingpin Outer frame with Load-Lock profile for securing straps 24 t 2-speed landing gear, one-side operation Extendable rear ladder Aluminium side underrun protection Galvanized steel underrun protection Rear impact protection Lockable plastic toolbox, W=600 / H=425 / D=460 mm Storage box for fire extinguisher up to 6 kg #Axles + Suspension Disc brake axles Laser-measured axle and chassis alignment for reduced tyre wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and starting aid (activated by 3x brake operation) #Brake system Dual-line compressed air braking system Colour-coded brake lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connecting lines EBS electronic braking system with EBS socket at front Raise/lower valve Vehicle height increases by approx. 50 mm when lift axle is raised Vehicle driving stability system #Wheels and tyres 445/45 R19.5" steel rims, factory silver finish #Electrical system 24 V system, multi-chamber lights Yellow LED side marker lights White front position lights White/red rear lane marker lights 2 x 7-pin non-interchangeable sockets at front #Floor Approx. 30 mm phenolic plywood floor panels on longitudinal supports High point load capacity for forklift axle loads up to max. 7,100 kg Rear steel chequer plate flooring approx. 300 mm length #Front wall / Corner posts Height 2,580 mm Steel corner posts in high-volume design Side curtain release system at front wall "Crash Blocker" steel impact protection inside lower area (approx. 140 mm height) Front wall additionally covered inside with 1,250 mm high phenolic plywood panel Fpedpfx Akszmub Ho Usl #Centre posts 3 pairs of sliding posts, movable over full length With 4-fold insertion pockets and long lower pocket 3 post positions 4 rows of aluminium V-insertion slats #Rear wall / Corner posts Steel rear corner posts up to roof height Curtain attachment with round tube and tension ratchet Double-wing rear portal doors with 2 internal rotary bar locks each #Curtain Curtain with welded horizontal and vertical reinforcement belts Stainless steel tension buckles #Roof Sliding roof system with rear end lift function Roof opens from rear to front L-shaped roof beam for automotive industry applications Non-elastic roof with minimal deflection during loading and unloading Optimized rain gutter at rear, mounted on top rear cross member above doors EcoLift roof lifting system, height adjustable by approx. 380 mm on both sides with gas spring assistance Complete body supplied loose as a kit (unassembled).

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902035352, empty load weight: 6,460 kg, maximum load weight: 32,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 40,000 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, color: original, Note: The images shown are archive photos. The vehicle may still be in operation. Additional Information Chassis – Curtainsider Semi-Trailer Lightweight high-tensile steel welded chassis with replaceable 2" kingpin Rail-road (Huckepack) version for combined road/rail transport Huckepack load securing code XL with 4 crane gripping edges Overall height max. 4,000 mm with air suspension deflated for pocket wagon transport (880 mm support height), rail code P400 Curtain with integrated crane edge protection according to DB requirements PRO SLIDE front guide plates on both sides of the kingpin Heavy Push Frame reinforced outer frame for intensive side loading 1 pair of rear landing legs with straight foot and single-side operation (right-hand side) 4 pairs of ferry lashing rings, yellow marked Heavy-duty pallet stop on both sides, fully bolted Storage compartment for 32 side boards (16 per side) beneath the loading platform Document box (360 × 260 × 40 mm) Axles & Suspension SAF disc brake axles for combined transport with anti-sag wire rope protection (or equivalent design) Laser-aligned axles and suspension for reduced tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded air lines for easy servicing Spring parking brake 2 interchangeable-proof air couplings plus C & CA-type air connections (UK) EBS electronic braking system with front EBS socket Raise/lower valve Electronic Stability Program (ESP) Brake pad wear indication via Trailer Info Center, including axle load, mileage and diagnostic/system information Tyre pressure monitoring system (TPMS) via EBS Wheels & Tyres 445/45 R19.5 Continental tyres Steel wheels, factory silver Wheel nut protection caps Electrical System Fsdpfxszl D Rze Ak Uspl 24 V lighting system 4 × three-chamber rear lights Round reversing light and rear fog light 2 red/white rear marker lights 2 × 7-pin and 1 × 15-pin front sockets 2 additional LED work lights at the rear Floor Approx. 30 mm plywood floor on longitudinal cross-members Forklift axle load capacity up to 7,100 kg Premium sealed floor with perimeter joint sealing Side Posts 3 pairs of sliding posts, fully adjustable 3 post positions Side Boards 5 rows of aluminium V-type side boards Curtain Reinforced curtain with welded horizontal and vertical straps 3 document pockets per side Stainless steel buckles Roof Sliding roof with rear end lift Roof slides from rear to front L-shaped roof beams for automotive loading Internal roof width approx. 2,490 mm White roof curtain Five-point roof bow securing system with additional roof safety hooks on every second roof bow Non-elastic roof design with minimal roof beam deflection during loading/unloading Optimised rear rain gutter above the doors EcoLift lifting roof, raises approx. 380 mm on both sides with gas strut assistance

Condition: used, maximum load weight: 25,620 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2012, loading space length: 13,350 mm, loading space width: 2,480 mm, loading space height: 2,120 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2012, Equipment: ABS, * Swivel wall superstructure, Ewers system * Cargo area dimensions: 13,350 x 2,480 x 2,120 mm Fpjdpfszlvzrsx Ak Uol * 2,500 kg Dautel tail lift * 4 rows of cargo securing * DEKRA certified * Trideck steering * Pallet jack box * MB axles * Disc brakes * Air suspension * Lashing rings in the outer frame

Condition: new, maximum load weight: 36,040 kg, overall weight: 53,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm * Gooseneck hydraulically raisable/lowerable and extendable * For tractor unit: 6 x 4 or 8 x 4 Low-bed: * Low-bed with external beams in an extendable SUPER LOW design, length approx. 8,000 mm * Low-bed with a fixed hardwood floor approx. 40 mm thick and mechanical locking system * The supply lines are protected in the extendable beams and automatically adjust to the respective low-bed length * 7 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screw-on RUD rings Rear chassis: * Rear chassis with closed outer frame and diamond plate cover * Chassis with excavator bucket, which is closed in the rear half to accommodate the air tanks * 3 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 1 pair of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally, at the front and rear of the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires: * Tires 245/70 R 17.5 3PMSF - at the manufacturer's choice. Load index (146/146F) Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paint: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Topcoat with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system Includes accessories: * 2-inch kingpin Fpodpfx Aksy Uwu Io Uol * One galvanized steel front bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanized connection strip at the front * Trailer steering, operable from the front and rear via cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) * Preparation for mounting screw-on container positioning for 1 x 20', 1 x 40' or 1 x 45' containers on the outer beams. Without container locking mechanisms * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings * Electro-hydraulic unit * Spiral cable for supplying the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with plug connection (NATO-NATO) * Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the semi-trailer * On the gooseneck and at the rear, left and right, one bracket each for the warning signs, including a socket * Manual and description on a USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pumps * 7 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD VLBG-4 rings * 2nd driving height, approx. 50 mm above the normal driving position, by means of manual operation * On the gooseneck, plug-in aluminum side panels and rear panel, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in frames are removable (length of the superstructure

Year of construction: 2024, operating hours: 6,782 h, condition: used, machine/vehicle number: 40499, Fiber laser cutting system for large-format sheets, frame construction, sheet size up to 4,065 x 2,025 mm, travel ranges: x: 4,200 mm, y: 2,070 mm, z: 130 mm, powerful IPG laser source with 10 kW power, highly developed cutting head with automatic adjustment of the focus position, automatic pallet changer system, integrated control and drive system, Touch-L control with a 19" flat screen, scrap conveyor with collection container, large-format automation type FL for loading and unloading pallets for formats up to 4,000 x 2,000 mm in 2 levels, including Thermotec cooling unit and Camfil filter unit. Fedpfozqzcfox Ak Ujpl

Year of construction: 2023, operating hours: 2,980 h, condition: used, machine/vehicle number: 140497, Fiber laser cutting system for large-format sheets, frame construction, sheet size up to 4,065 x 2,025 mm, travel ranges: x: 4,200 mm, y: 2,070 mm, z: 130 mm, powerful IPG laser source with 10 kW power, highly developed cutting head with automatic adjustment of the focus position, automatic pallet changer system, integrated control and drive system, Touch-L control with a 19" flat screen, scrap conveyor with collection container, large-format automation type FL for loading and unloading pallets for formats up to 4,000 x 2,000 mm in 2 levels, including Thermotec cooling unit and Camfil filter unit. Fsdpfx Akjzqzb Uo Uspl

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Fsdpfx Akjzrt Uie Uopl Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 41,830 h, machine/vehicle number: A0230A2043, laser type: CO₂ laser, laser hours: 23,313 h, laser power: 6,000 W, power: 120 kW (163.15 HP), input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 10 bar, Equipment: documentation/manual, dust extraction, safety light barrier, We offer this used TRUMPF TruLaser 5030 laser cutting machine, year of manufacture 2007. Laser power: 6000 W Year of manufacture: 2007 Supply voltage: 400 V Frequency: 50 Hz Connected load: 120 kVA Fodeyqulzjpfx Ak Uopl Control voltage: 24 V Protection: 3 x 160 A Compressed air connection: 7-10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser power: 3,000 W, sheet thickness (max.): 3 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 100 mm, feed rate Y-axis: 15 m/min, workpiece weight (max.): 15,000 kg, power: 3 kW (4.08 HP), type of cooling: water, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1503CH Laser Blanking Line | Coil Laser Cutting System 3–6 kW For sale is a SENFENG SF1503CH Laser Blanking Line, a fully automatic coil laser cutting system for processing thin sheet metal directly from the coil. The system combines unwinding, leveling, feeding, laser cutting, and unloading in a continuous production line. It is particularly suitable for manufacturers who want to automate their series production, reduce material handling, and improve material utilization. Fpjdet Huugjpfx Ak Uol Application areas: Suitable for automotive suppliers, switchgear and housing construction, mechanical engineering, construction and agricultural machinery, kitchen and sanitary industries, metal furniture, medical technology, facade and decorative elements, and general sheet metal processing. Processable materials: Carbon steel, stainless steel, galvanized sheet metal, and other suitable coil materials after technical evaluation. Technical data: Model: SENFENG SF1503CH System type: Coil laser cutting system / Laser blanking line Laser power: 3–6 kW Working area: 3000 × 1500 mm Coil thickness: 0.8–3.0 mm Coil width: 600–1500 mm Max. coil outer diameter: Ø 1400 mm Standard coil inner diameter: Ø 508 mm Max. coil weight: 10,000 kg Feeding speed: 0–15 m/min Feeding length: 0–3000 mm Positioning accuracy X/Y: ±0.05 mm Repeatability X/Y: ±0.02 mm Power supply: 380 V, 50 Hz, three-phase Protection class: IP54 Possible equipment / configuration depending on the offer: Depending on the configuration, the system can be equipped with a loading cart, unwinding unit, feed and leveling unit, sheet metal positioning and alignment system, laser cutting unit, CNC cutting system, operator interface, cooling system, safety monitoring, and unloading or material take-up unit, among other features. Optionally, depending on the project requirements, protective film lamination, marking system, safety fence/light curtain, nesting software, and dust and fume extraction can be included. The exact equipment, brands of key components, and optional extensions are determined in the individual offer. Advantages: Fully automatic process from coil to finished cut part Reduced manual material handling High material utilization through coil processing and nesting Precise sheet metal guidance through correction and alignment system Leveling technology for stress reduction and improved flatness Suitable for continuous series production Intelligent CNC control with process database Automatic selection and control of auxiliary gases possible Description: The SENFENG SF1503CH was developed for processing thin coil material. Compared to conventional sheet metal cutting, the system reduces several intermediate steps such as separate unwinding, external leveling, manual loading, and individual handling of sheet metal. The coil material is picked up, unwound, leveled, and then precisely fed to the laser cutting unit. The integrated leveling technology improves the flatness of the material and reduces internal stresses before the cutting process. The system is particularly suitable for companies with a regular need for flat sheet metal parts, recurring contours, and series production. Inspection, technical consultation, and quotation upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, No reserve price – guaranteed sale to the highest bidder! The machine was last overhauled in 2024! TECHNICAL SPECIFICATIONS Material loading area: 4,000 mm x 2,000 mm MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm EQUIPMENT Fedpfx Ajy Nkzqjk Uspl Service and inspection history dating back to 2019

Condition: good (used), Year of manufacture: 2000 Machine number: 080520 Control: Sinumerik 840D Combined working area: 2,585 x 1,280 mm Laser operation: 2,585 x 1,280 mm Punching operation: 2,585 x 1,370 mm Punching force: 220 kN Sheet thickness: 8 mm Speed x-axis: 90 m/min y-axis: 60 m/min simultaneous: 108 m/min Strokes per minute: 600 Linear magazine tools: 19 Max. punching diameter: 76.2 mm Laser: 90 to 1,800 W Applications: punching, slotting, shearing, bead forming, hemming, laser cutting Accessories: 4 complete cabinets - see separate email Condition: good, ready for operation Connection: 70 kW Fjdpfx Akjxu Hlgs Ujpl Weight: 16 t Dimensions: 7,000 x 7,400 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser power: 3,000 W, New Senfeng SF1313G 3 kW Laser Cutting Machine for Sale Precision Laser Cutter for Metal, Acrylic & Plastics – Available Immediately We offer a used Senfeng SF1313G laser cutting machine with 1.5 kW for sale. The machine is fully operational, reliable, and ideally suited for processing metal, acrylic, and plastics – perfect for companies, workshops, or start-ups looking for a CNC laser cutter. Thanks to its compact design and powerful laser, the SF1313G is ideal for precise laser cutting and a variety of industrial applications. Technical specifications & features Machine attributes Manufacturer: Senfeng Model: SF1313G Power: 3 kW Type: CNC laser cutter / laser cutting machine Materials: Metal Condition: used, inspected, fully functional Advantages of the Senfeng SF1313G - Precise laser cutting for various materials - Easy operation & reliable performance - Ideal for industry & trades - Compact design, easy to integrate into workshops Why choose this laser cutter? - Used, but fully functional: Ready for immediate use - Industrial quality: For precise metal processing - CNC control: Accurate and repeatable results - Versatile: Suitable for workshops, start-ups, small batch production - Regionally available: Located in Thuringia / fast pick-up possible --- Model Overview SF1313G MAX 3000W Laser Cutting Machine Features: - High-strength machine bed - Fully automatic focus - High-strength aluminium alloy beam - Intelligent following system G·Classic Series Technical Parameters (SF1313G) 1. Work area: 1300×1300 mm 2. X-axis travel: 1300 mm 3. Y-axis travel: 1300 mm 4. Z-axis travel: 100 mm 5. X/Y positioning accuracy: ±0.05 mm 6. X/Y repeatability: ±0.02 mm 7. Maximum speed: 80 m/min 8. Maximum acceleration: 0.8 G 9. Total weight: 1870 kg 10. Maximum load: 220 kg 11. Dimensions: 2985×2160×2000 mm 12. Phase: Three-phase 13. Voltage: 380 V 14. Frequency: 50 Hz 15. Protection class: IP54 Cutting Parameters (Stainless Steel + Carbon Steel) Stainless Steel: 1 mm – 30-45 – N2/Air 2 mm – 20-25 – N2/Air 3 mm – 8-10 – N2/Air 4 mm – 5-6 – N2/Air 6 mm – 2-3 – N2/Air 8 mm – 1-1.5 – N2/Air 10 mm – 0.5-1 – N2/Air 12 mm – 0.4-0.6 – N2/Air Carbon Steel: 1 mm – 30-40 – Air/N2 2 mm – 15-20 – Air/N2 3 mm – 3.5-4.5 – O2 6 mm – 2.5-3.5 – O2 8 mm – 1.8-2.3 – O2 10 mm – 1.4-1.8 – O2 12 mm – 1.0-1.4 – O2 14 mm – 0.8-1.0 – O2 16 mm – 0.7-1.1 – O2 20 mm – 0.5-0.7 – O2 Cutting Parameters (Brass + Aluminium) Brass: Fsdeyxf Rlopfx Ak Uopl 1 mm – 25-30 – N2/Air 2 mm – 12-17 – N2/Air 3 mm – 5-6 – N2/Air 4 mm – 2-3.5 – N2/Air 5 mm – 1.8-2.5 – N2/Air 6 mm – 0.8-1.0 – N2/Air Aluminium: 1 mm – 30-35 – N2/Air 2 mm – 14-20 – N2/Air 3 mm – 8-10 – N2/Air 4 mm – 5-6.5 – N2/Air 5 mm – 2.5-3.5 – N2/Air 6 mm – 1.2-1.5 – N2/Air 8 mm – 0.7-1.3 – N2/Air Warranty – 2 years

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Available starting September/October. Operating hours: Laser: 35,000 hours. Fodpfx Aezn N Hgok Uepl

Year of construction: 2013, condition: ready for operation (used), A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible. Fpodpfx Asv Rfrbjk Ujl

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Fodoci Ik Sopfx Ak Uspl Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Voltage stabilizer 48-72 KVA Enclosure according to Laser Class 4 Heavy-duty machine base. High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Specialized air duct with oversized diameter, ensuring smooth fume extraction. Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Fsdsw U Ezzjpfx Ak Uopl Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.