Used Irle Tlb 1100 for sale (2,648)

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Lasdpfx Asxgic Eslboh Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Lodpfx Aouddimslbeah Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Year of construction: 1999, condition: excellent (used), WIDE BELT GRINDER, 2 UNITS: CONTACT CYLINDER AND GRINDING WHEEL CYLINDER, HORIZONTAL GRINDER, CONTACT CYLINDER MOTOR 15 kW, GRINDING WHEEL CYLINDER MOTOR 7.5 kW, CONTINUOUSLY VARIABLE FEED RATE CONTROL. Laedpfx Alegrdx Usboh

Condition: good (used), Year of construction: 2004, CNC lathe IRLE - IWDS 1000 CNC MACH-ID 7758 Make: IRLE Type: IWDS 1000 CNC Control: SIEMENS 840D Year: 2004 Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Lajdpepdp N Ijfx Albsh Roller rest 860 - 1090 mm 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Stoke X Axis 950 mm Stroke Z Axis 14900 mm Specifications Metric US Standard Swing over bed Ø 1400 mm Swing over cross slide Ø 1100 mm DBC Turning Length 13000 mm Spindle power 129 kW Workpiece weight 20000 Speeds / ranges 1 - 300 Rpm Feed rate X-Axis 4500 mm/min. Feed rate Z-Axis 4500 mm/min. Dimensions (Estimate) Length 20000 mm Width 3380 mm Height 2200 mm Weight 100000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), CATALOGUE NUMBER 6145 TECHNICAL DATA - max width of workpiece 1100mm - max height of workpiece 140mm 3 units: 1) ribbed rubber roller for calibrating, 15kW Lodpfezw Dtmex Albsah 2) ribbed rubber roller for calibrating, 11kW 3) ribbed rubber roller for calibrating, 11kW from above: - sliding metal roller - sliding rubber roller - unit - 2 sliding rubber rollers - unit - 2 sliding rubber rollers - unit - sliding rubber roller from below: - infeed table 3600x1000mm - feed speed adjustable via frequency inverter, 0.25kW - pull belt - 3 sliding rubber rollers, output - pneumatic belt oscillation with photocells - belt blowing - electric table lifting - lifting motor 0.75kW - smooth feed speed adjustment - feed motor 2.2kW - with vacuum pump - pump motor 4kW - extraction nozzle diameter 110mm, 80mm - working pressure 6-8bar - extraction nozzle diameter 3×150, 3x200mm - overall machine dimensions L/W/H 3400x2300x2800mm - feeder dimensions L/W/H 3000x1300x900mm - pump dimensions L/W/H 600x950x940mm - weight approximately 5000kg Net price: 32900 PLN Net price: 7650 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Laedpezqun Uefx Albjh Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting Laodpo Aayk Rjfx Alboh

Condition: used, Year of construction: 2024, operating hours: 12,713 h, functionality: fully functional, overall weight: 55,000 kg, clamping force: 11,000 kN, Insolvency Sale For sale is a high-quality, fully equipped aluminum and magnesium die-casting cell from the manufacturer ItalPresseGauss, consisting of: - ItalPresseGauss die-casting machine, type IP 1100, manufactured in 2024, 12,713 operating hours, machine weight 55 tons, clamping force 1,100 tons - RAUCH magnesium melting furnace - RAUCH preheating station - RAUCH degassing system - REIS cooling tank About the auction: Auction of machines and operating equipment from an aluminum and magnesium die-casting plant with CNC manufacturing (approx. 150 items). Inspection: An inspection is possible at the location in DE-92224 Amberg. Interested? If you have any questions or require further information, please feel free to send us a message or call us. Laede Aara Depfx Alboh

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: 22166, input voltage: 400 V, total height: 625 mm, total length: 1,315 mm, total width: 470 mm, Equipment: type plate available, For sale is a compact oil and emulsion mist separator, type AFS 1100. The unit is from the 2017 production year and was included as an accessory when a CNC milling machine was purchased. Since we already have a central extraction system in our production facility, we no longer need this individual unit and are selling it in its current condition. Technical specifications (manufacturer's data): Manufacturer: AFS Airfilter Systeme GmbH Model: AFS 1100 Year of manufacture: 2017 (Equipment number: 22166) Dimensions (L x W x H): approx. 1,315 x 470 x 625 mm Weight: approx. 72 kg Connection voltage: 400 V / 50 Hz Accessories: Includes original floor stand for free placement next to the machine. Lajdsz Ei Ayjpfx Albsh Condition and terms of sale: The unit shows the usual, normal signs of wear from a workshop environment (see photos). Since we will no longer electrically connect or install the extraction system at our location, a functional test was not possible on our part. We are therefore selling the unit expressly as untested/defective/for spare parts/for DIY enthusiasts, with the exclusion of any warranty. Scope of delivery: 1x extraction unit AFS 1100, 1x matching stand (as available/shown in the pictures) Shipping: Only self-collection or the buyer organizes shipping via a freight forwarder. A forklift for loading is available on site. The sale is exclusively to commercial customers (B2B) without any guarantee, warranty, or right of return. A proper invoice with VAT will be issued. If you are interested or have any questions, please send us a message or an offer.

Condition: used, Year of construction: 1991, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 3,400 kg, height adjustment type: electric, OTT Omega 1100 (year of manufacture 1991) Dimensions and weight: Footprint / installation dimensions (L x W x H): approx. 2700 x 2100 x 2200 mm Weight: approx. 3400 kg Laodpfxez Dpxlo Alboh Extraction: 3 extraction ports

Condition: good (used), - Used machine Lsdpoz Tflnefx Alboah - Passage width: 1100 mm - Passage height: 3 - 160 mm - 1st unit: Contact roller - 2nd unit: Grinding shoe - Grinding belts: 1120x1900 mm - Motor power: 15.0 kW - Feed rate: 5 - 25 m/min - LxWxH: 1910 x 1570 x 1920 mm - Weight: 2500 kg - Ex works

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 650 mm, travel distance Z-axis: 800 mm, overall weight: 71,400 kg, spindle speed (max.): 105 rpm, spindle motor power: 100,000 W, number of axes: 2, Horizontal machining centre manufactured in 2004. This IRLE IRD 1600 CNC features a maximum pipe diameter processing capability of 1,625 mm and a maximum pipe length of 13,200 mm. It supports a maximum pipe wall thickness of 70 mm and can handle pipe weights up to 250 kN. If you are looking to get high-quality machining capabilities, consider the IRLE IRD 1600 CNC machine we have for sale. Contact us for further details. Ljdpfxozr Nmuj Albsah - Max. Pipe Diameter to be Processed: 1,625 mm- Min. Pipe Diameter to be Processed: 406 mm- Max. Pipe Length to be Processed: 13,200 mm- Min. Pipe Length to be Processed: 6,000 mm- Min. Pipe Wall Thickness: 12 mm- Max. Pipe Wall Thickness (Copying Process): approx. 40 mm- Max. Pipe Wall Thickness (CNC Operation): 70 mm- Max. Pipe Weight to be Supported: 25500 kg- Height between Hall Floor and Pipe Inlet: 800 mm- Total Machine Length: approx. 24,000 mm- Total Machine Width: approx. 4,100 mm- Total Height from Floor to Top of Clamping Vise: 5,000 mm- Total Machine Weight: approx. 71400 kg- Operating Voltage: 400 V, 3-phase, 50 Hz- Control Voltage: 220 V DC / 50 Hz- Nominal Operating Current: 400 A- Intermediate Bed - Bed Length: approx. 3,950 mm- Intermediate Bed - Bed Width: approx. 1,800 mm- Intermediate Bed - Bed Height (incl. chassis): approx. 600 mm- Intermediate Bed - Travel Speed on Foundation Rails: 500 - 5,000 mm/min- Intermediate Bed - Drive Motor Power: 5.5 kW- Headstock - Faceplate Speed Range: 7 - 105 min⁻¹- Headstock - Motor Speeds: 300 - 4,500 min⁻¹- Headstock - Motor Power: 100 kW- Headstock - Motor Power (S1 Duty Cycle): 105 kW- Headstock - Max. Faceplate Torque (S1 Duty): 33,000 Nm- Headstock - Characteristic Speed: 27 min⁻¹- Headstock - Main Spindle Diameter (Front Bearings): 300 mm- Faceplate (X-Axis) - Faceplate Diameter: approx. 1,950 mm- Faceplate (X-Axis) - NC Tool Support Travel Range: approx. 650 mm- Faceplate (X-Axis) - Tool Support Feed Rate (Infinitely Variable): 0.5 - 1,500 mm/min- Faceplate (X-Axis) - Max. Achievable Feed Force: 25 kN- Feed Gearbox (Z-Axis) - Headstock Feed Travel on Machine Bed: 800 mm- Feed Gearbox (Z-Axis) - Feed Rate (Infinitely Variable via AC Servomotor): 0.5 - 200 mm/min- Feed Gearbox (Z-Axis) - Rapid Traverse Speed: 1,500 mm/min- Feed Gearbox (Z-Axis) - Feed Force: 30 kN- Feed Gearbox (Z-Axis) - Feed Motor Torque: 27 Nm- Pipe Clamping Steady Rests - Clamping Range: 406 - 1,625 mm- Pipe Clamping Steady Rests - Pipe Weight Capacity per Steady Rest: 150 kN- Pipe Clamping Steady Rests - Adjustable Clamping Force: 10 - 200 kN- Pipe Clamping Steady Rests - Max. Adjusting Speed of Centrally Moving Clamping Crossbars: 600 mm/min

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, FEELER VMP-1100 CNC Vertical Machining Centre with NIKKEN CNC202 FA 4th Axis Year 2012 Control FANUC 0i-MD Table size 600 x 1200 mm Travels XYZ 1100 x 610 x 600 mm Spindle nose to table 137 - 735 mm Spindle centre to column 660 mm Spindle speeds to 10000 rpm Spindle taper BT 40 Spindle motor 18.5 kW Number of tools 30 ATC Rapid traverse X & Y 36 m/min, Z 24 m/min Weight 6800 kg Supplied with: Lodpfx Aez R Tn Hjlbsah BLUM Tool Probe, Swarf Augers, Rear Swarf Conveyor, Spindle Chiller, Filtermist FX5002, Tooling Package. NIKKEN CNC202 FA 4th Axis complete with 200 mm Diameter Faceplate, 135 mm Centre Height, 115 mm Riser Block, Tailstock and Mounting Sub Plate/Table. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27003 Machine Serial Number: VNJ1074 Cost: £34,950.00 + VAT

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Lodpfx Aloz Ef N Asbeah Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, overall weight: 11,500 kg, transport length: 11,800 mm, input voltage: 380 V, transport height: 2,200 mm, transport width: 2,400 mm, Equipment: documentation/manual, PRIMULTINI SE-CEA-IEA 1100 RIGHT-HAND LOG SAWMILL with loader and unloader 1) SE 1100 COLUMN 1100×120 mm flywheels for 130×7500 mm blades electric blade tensioner and blade guide Lajdpfx Aez Rvdpolbeh 60 hp engine with automatic starter 2) CEA-IEA CARRIAGE 4 vices with electric clamping and release vice opening 900 mm 3 hydraulic log turners electric spacers with two speeds hydraulic feed with cable rail length 16.5 m control panel 3) COMPLETE AUTOMATION INCLUDING: - 5000 mm 3-way log loader with 4 loading arms - unloading system with 6500 mm motorized conveyor with helical rollers (for side or longitudinal unloading) with 2 pneumatic log handling arms 4) FOUNDATION DRAWING AND OPERATION AND MAINTENANCE MANUAL - disassembled by specialized technicians, ready for loading - transport dimensions: open-top semi-trailer or 40″ open-top container - weight 11,500 kg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1100 DG, total length: 2,300 mm, total width: 2,300 mm, total height: 2,300 mm, type of input current: AC, pivoting range: 120 °, input voltage: 400 V, overall weight: 5,400 kg, cutting range round steel at 45°: 510 mm, cutting range round steel at 90°: 510 mm, space requirement height: 2,500 mm, space requirement length: 2,300 mm, space requirement width: 4,400 mm, cutting range square steel at 45°: 700 mm, We are offering this used MEBA MEBASteel 1100 DG double mitre saw, manufactured in 2014. Laodpfezx N Tzox Albsh Manufacturer: MEBA Model: MEBASteel 1100 DG Year of manufacture: 2014 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected. Lasdpfx Alsy D D A Dobsh

Condition: excellent (used), Year of construction: 2018, operating hours: 4,883 h, CN DMG MORI SLIM line Multi Touch Control 19” (operates on Siemens) Spindle hours: 4883 hours 2770 x 2750 x H2935 mm, footprint 4850 x 6100 mm Weight: 5830 kg Spindle speed: 12000 rpm X-axis: 1100 mm, Y-axis: –560 mm, Z-axis: –510 mm Table: 1400 x 560 mm Rapid traverse: 30 m/min Spindle power: 13/9 kW 30-position tool changer with dual arm Chip conveyor Washing gun Through-spindle coolant Laodjz H I Nnjpfx Albeh Chip conveyor Electronic handwheel Renishaw tool probe and workpiece probe

Condition: used, functionality: fully functional, Year of construction: 2013, Concrete mixing plant, Sipe 1100 Year of manufacture: 2013 Mixer: 1100 l / Output approx. 25 m³/h Mixer has 2 outlets/discharge points 2 x cement silos, each 40 t, with cement screw conveyor Mixing gantry with mixer and fully automatic control system with recipe memory 1 x scraper arm with chain for 2 types of gravel Installation/commissioning can be offered. Ledpfx Ae Advnmslbjah

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Ledpfx Aex Twcpjlbjah

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 17080-010, Single-shaft shredder. Rotor diameter 370 mm. Drive power 37 kW. Suitable for processing all types of materials, including paper, wood, and plastics. Laodpfx Alez Aif Sjbeh

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing logs and boards and features a continuously variable feed rate and a cutting depth control. Lasdpfxozxrtqe Albsh Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Continuously variable feed rate Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm in length × 600 mm in diameter Equipment: Resawing device for cutting logs and boards Programmable cutting depth control ELGO Electric Type 87P Pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm Heavy-duty industrial design Condition and scope of delivery as per photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Additional information: The lower band saw wheel protrudes approx. 300 mm below floor level. Therefore, a corresponding floor recess is required for the installation of the machine. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site but would be available in the short term! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: refurbished (used), functionality: fully functional, pump pressure: 400 bar, This excellently maintained Agilent 1100 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent Service Engineers. The last maintenance was performed in July 2026, during which the system successfully passed the inspection. Configuration: Agilent 1100 Solvent Tray Agilent 1100 Vacuum Degasser G1322A Agilent 1100 Quaternary Pump G1311A Agilent 1100 Standard Autosampler G1329A Lsdpfx Aszzdxqelbjah Agilent 1100 Thermostated Column Compartment G1316A Agilent 1100 Variable Wavelength Detector (VWD) G1314A Agilent 1100 Controller G1323B 3-month warranty 3-month warranty

Condition: used, Year of construction: 1976, Profile bending machine Lodjytn E Tepfx Albeah IRLE - B 160 HH Technical data on photo

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Ljdpezrnwlsfx Albjah Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)