Used Ipetronik 561-001-3705 for sale (2,079)

Condition: used, 2 pieces available See also my other offers in the automotive measurement technology category Nwsdpfjwm Inpjx Ahksk

Condition: new, IPETRONIK Interior Simulation Box Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) Nodozd Ukpspfx Ahkjwk The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions

Condition: used, Year of construction: 2026, functionality: fully functional, empty load weight: 240 kg, load capacity: 2,500 kg, Rotary device ISO class: ISO class 2 = 1,000 - 2,500 kg Nwodpozwyf Eofx Ahkek Condition: Ready for use and fully functional Technical condition: very good Description: Good working condition, ready for use, as returned by the previous owner.

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm Nodpezi Uq Hofx Ahkswk CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: used, Year of construction: 1998, operating hours: 93,000 h, functionality: fully functional, machine/vehicle number: 174380, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, mold height (min.): 1,050 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 222 A, Equipment: documentation/manual, For sale: 200-ton Krauss Maffei injection molding machine. The machine is currently in production and can be inspected while in operation. Distance between columns (H x V): 560 x 560 mm Platen size: 915 x 915 mm Nedpfx Ahozwwyaekjwk Max. open height: 1050 mm Min. mold height: 350 mm Opening stroke: 700 mm

Condition: new, I offer SIEMENS synchronous motors in the following versions: 👉 1FE1093-6WV11-1BZ2-Z 👉 1FE1093-6WV1 High-grade built-in industrial units suitable for CNC machine tools and precision drive systems. Condition: new / old stock (NOS) ⚙️ Technical specifications: Manufacturer: Siemens Type: synchronous motor (built-in / spindle motor) Voltage: 425 V Maximum speed: up to 7000 rpm Nedpfx Ahoyxdw Dekewk Cooling: water-cooled Temperature sensor: KTY84-130 Duty cycle: S1 / S6 Protection rating: IP00 Country of origin: Germany 📊 Additional information (for version 1FE1093-6WV11-1BZ2-Z): Power: 16.8 – 21.5 kW Current: 43.0 / 60.0 A Maximum torque: 165 Nm 📦 Included: stator rotor Siemens documentation

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Nsdpjzv N Hpjfx Ahkswk Dust extraction system: Donaldson Torit DCE

Condition: used, Year of construction: 2015, machine/vehicle number: 663462, functionality: fully functional, Specification: Min./max. air pressure: 0.4/0.6 MPa; 4/6 bar Max. pressing force: 50 kN Total stroke: 150 mm Power stroke: 7 mm Type: STE341-7210 SF device Power: 0.5 kW Power supply: 230/3/50-60 V/A/Hz Control voltage: 24 VDC Nwedpowtgpxjfx Ahksk Protection rating: IP54 Pre-fuse: 16 A The TOX Pressotechnik hydropneumatic press EEB 008.061.A.001 is a versatile and powerful solution for precise forming and assembly operations in industrial manufacturing. It combines the advantages of hydraulics and pneumatics to ensure consistent force transmission and high accuracy. The robust design ensures long service life and reliable operation, while the user-friendly control system enables easy handling.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Autoclaves Technical Specifications * Quantity: 2 Autoclaves with automatic loading system * Length: 12 000 mm * Diameter: 3 200 mm * Volume: 102 231 L * Maximum Operating Pressure: 4.0 bar * Maximum Operating Temperature: 120 °C * Test Pressure: 7.4 bar Boiler Technical Specifications * Boiler Brand: Norbidel * Year: 2018 * Model: NB B1200 * Fuel: Natural Gas * Fluid: Water + Steam * Steam Production: 1,200 kg/h * Maximum Allowable Pressure: 10 bar(g) * Test Pressure: 16.2 bar(g) * Maximum Temperature: 183.2 °C * Minimum Temperature: 20 °C * Heating Surface: 30 m² Nwjdpsyt Nqqsfx Ahkjk * Volume: 3,365 liters * Thermal Power: 1,030 kW * Total Empty Weight: 6,200 kg

Condition: ready for operation (used), Heidenhain UM 112 inverter, ID: 325 001-02, serial number: 10775502A – including test report. The item has been fully overhauled and comes with a 3-month warranty. Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Nwsdpfszv Hq Sjx Ahksk

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Nwedpsy Sv S Hjfx Ahkjk

Condition: ready for operation (used), Heidenhain UM 112 inverter, ID: 325 001-02, serial number: 10775502A – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective unit must not have any mechanical damage, such as breakage, as these cannot be repaired. In such cases, an additional charge of €1000 (including VAT) will be applied. Attention: You are bidding on a Heidenhain UM 112 inverter, ID 325 001-02, serial number 10775502A, as part of an exchange service. It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective unit must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €1000 (including VAT) will be issued. Nwedpfx Ahozv Hrcjkok

Condition: used, 2 units available See also my other offers in the field of automotive measurement technology Bandwidth up to 100 kHz Njdpfx Aewm Imxohkewk Reliable voltage measurement in DC high-voltage systems Galvanically isolated high-voltage divider For applications in electric and hybrid vehicles Direct connection to SENS modules Approved application areas according to CAT I and CAT II

Condition: ready for operation (used), WEISS 168928B-001 spindle, used, normal signs of wear, 100% functional, delivery contents as shown in photos. ATTENTION: Please enquire for charges for packing and transport separately! Nsdpfx Aezu Hunohkewk

Condition: ready for operation (used), Tox Pressotechnik STE 601-007-001 / EPMK 100.101.600.001 screw jack – overall length: 128 cm, used, good condition, 100% fully operational, scope of delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Nedpjzu Hifofx Ahkjwk

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, maximum load weight: 1,062 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 150 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 256 150 1500 1, Single-axle tipper trailer NEW VEHICLE Internal dimensions: 256cm x 150cm Sideboard height: 30cm Bed height: 67cm Total weight: 1500kg Payload: 1059kg Braked single-axle trailer Overrun brake and parking brake by AL-KO 1500kg axle with brake and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on plywood floor Automatic jockey wheel with 400kg support load 6 noise-reducing tie-down points with 800kg tensile force Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber supports Large tipping angle of 41 degrees backwards Hand pump with adjustable handle OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Electric tipping operation -Charger Nwedpfx Ajghpbnehkok -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on a tilted vehicle -Folding crank for rear supports -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension sideboards 30cm with tension lock -Flat cover with or without bows -High cover 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration document 200 € net Pictures are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, also for caravans. In addition, we have a large range of spare parts and accessories, also for trailers from various manufacturers. Visit us online or come by directly!

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number Nwsdozvrluopfx Ahkok WV 2000 C 001 Year of manufacture 2015 Capacity 2000 m3/h Max. vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology Nwedpfx Aozwl Dmjhkok - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: used, functionality: fully functional, Available quantity: 9 units “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Manufacturer: Stahl Prüftechnik Type: 2011-SB-GH200-001 Function: Module for expanding testing systems, suitable for leak or functional tests Interface: Sub-D / Bus-compatible Operating voltage: 24 V DC Housing: Aluminum / Laboratory standard Nedpfezhnwkjx Ahkewk

Condition: like new (used), TECHMI 10-Piston Automatic Filling Machine – Stainless Steel TECHMI automatic 10-piston filling machine, designed for the precise and continuous dosing and filling of liquid, semi-liquid, and viscous products into containers on industrial production lines. The machine is equipped with 10 filling pistons/nozzles, allowing multiple containers to be filled simultaneously during each production cycle and providing an efficient solution for medium and high-output filling applications. Predominantly manufactured in stainless steel, the filler features an integrated in-line conveyor, enclosed filling area, and operator control panel, making it suitable for professional food and beverage processing and packaging environments. MAIN FEATURES -Manufacturer: TECHMI -Machine type: Automatic piston filling machine -Number of filling pistons: 10 -Multi-head/multi-nozzle filling configuration -Automatic volumetric filling system -Designed for continuous industrial production -Integrated container conveyor -Automatic container positioning beneath the filling heads -Stainless-steel construction -Enclosed filling area with safety guarding -Integrated operator control panel/HMI -Adjustable filling system -Suitable for integration into existing filling and packaging lines -Designed for professional food processing and packaging environments PROCESS APPLICATION The TECHMI filler is designed to automatically dispense product into containers using a 10-piston filling system. Empty containers are transported into the filling area by the integrated conveyor and positioned underneath the filling nozzles. The piston dosing system then dispenses a controlled quantity of product into multiple containers simultaneously before they are released towards the next stage of the packaging line. Piston filling technology is particularly suitable for applications requiring controlled volumetric dosing, including products with a higher viscosity or consistency than those typically handled by conventional gravity filling systems. Depending on the product, container format, and line configuration, the TECHMI filler can be integrated with: Container feeding systems Bottle and jar conveyors Capping and closing machines Lid feeding systems Checkweighers Metal detectors and inspection systems Nedezwwa Tjpfx Ahkjwk Labeling machines Coding equipment Case packing machinery Complete automatic filling and packaging lines SUITABLE FOR An interesting solution for food manufacturers, sauce and condiment producers, preserve manufacturers, and industrial packaging companies requiring an automatic multi-head volumetric filling system. Depending on the installed configuration and product characteristics, piston fillers of this type can be suitable for products such as sauces, dressings, creams, purées, pastes, jams, tomato-based products, condiments, and other liquid or viscous food products. The 10-piston configuration provides simultaneous multi-container filling, making the machine particularly interesting for industrial production lines requiring automated and repeatable dosing. Machine available for inspection. Further technical information, dimensions, additional pictures, or videos can be supplied upon request.

Condition: like new (used), Year of construction: 2020, - 2 pneumatic clamps Nwjdpfxsr Iiime Ahkok - Mist lubrication system - depth adjustment - 400V

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 001/003, used, normal signs of use, 100% functional, scope of delivery as per photos Nedpszu Hr Tofx Ahkswk

Condition: new, Siemens 1FT7044-5AF71-1CG2-Z motor SN: YFF5618021201001 – Z = Q12 (purge air connection on the housing), unused in original packaging, 100% functional, delivery as shown in the photos. Nwjdjx Duy Dopfx Ahkek

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Model / Type: W822-1264 Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Connected load: 1.9 kVA Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Nodpfxozu Rzfj Ahkowk Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2006, total length: 13,890 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 9,110 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - SAF Assen - Sunroof = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: SAF Nwodjzvl Ezjpfx Ahkjk Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 70% Weights Empty weight: 6.600 kg Carrying capacity: 32.400 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Registration number: OJ-31-KY