Used Interchangable Body for sale (12,832)

Condition: like new (used), functionality: fully functional, Year of construction: 2012, color: white, overall weight: 16,000 kg, maximum load weight: 12,800 kg, empty load weight: 3,200 kg, loading space volume: 56 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 2,930 mm, MOBILE IRON BOX WITH PLYWOOD SIDE WALLS RAILWAY PLATE REPAINTED IN WHITE RAL 9010 Gusdpfx Ajxax Epjngoh LEG HEIGHT: 93 cm 2 UNITS AVAILABLE

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 8,200 h, Equipment: additional headlights, hydraulics, MAFI container transporter MTL18 Gedpfx Anjw Aqcusgouh Equipped with VOLVO PENTA engine BOSCH hydrostatic transmission Fully functional and currently in operation Minimum platform height 85 cm from ground Tyres at 70% tread remaining Air compressor recently replaced Serviced in July 2025 Excellent for any type of swap body/container body

Condition: new, functionality: fully functional, overall weight: 16,000 kg, maximum load weight: 13,700 kg, empty load weight: 2,300 kg, loading space width: 2,480 mm, loading space length: 7,750 mm, loading space height: 3,000 mm, machine/vehicle number: Produktpalette, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Tandem Trailer Chassis Guedpfx Anjkt Ni Uegoh Welded steel construction with a floor assembly approximately 152 mm high; load-bearing and torsionally rigid steel frame construction. Longitudinal beam floor construction with a load-resistant outer frame and guide tunnels spaced 600 mm apart; tunnels feature guides on top and sides, tunnel height approx. 45 mm; 4 x swap body corner fittings based on a 20-foot standard. 4 side-extending/folding parking feet with dual locking mechanism for a parking height of 970 mm, with support leg rest Side door stops Rear impact protection made of flat bar Pallet stops on both sides, approx. 20 mm high with perforated profile for securing straps; loading height is reduced by approx. 20 mm Floor Screen-printed panels approx. 27 mm thick, for high point load capacity, for forklift axle load up to max. 4,400 kg Front wall/corner stanchions Approx. 2,580 mm high, remainder covered with tarp; steel corner stanchions in full-size design; release mechanism for side tarp on front wall Inner front wall additionally lined with a 1,250 mm high screen-printed panel Center stanchions 1 pair of sliding stanchions adjustable along the entire length, with 4-compartment pockets and a long pocket at the bottom. 1 pair of stanchion positions Slotting Slats 5 rows of wooden V-shaped slotting slats Rear wall/rear corner stanchions Rear steel corner stanchions extending to the bottom edge of the roof, tarpaulin attachment with round tube and tarpaulin tensioning ratchet Rear portal doors, double-leaf, each with 2 internal twist-lock latches Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps, reinforcements for stanchions Stainless steel tensioning fasteners Roof Sliding roof, rear end lift folds up, roof can be slid from rear to front, L-shaped roof rail for the automotive industry, interior width between roof rails approx. 2,490 mm, tarpaulin color: white EcoLift – lifting roof by approx. 380 mm, liftable on both sides, with gas spring assistance, Registration / Plates Country of registration: Germany Fliegl manufacturer’s certificate for body strength in accordance with EN 12642 XL, Fliegl manufacturer’s certificate for body strength in accordance with DL 9.5, pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm Fliegl manufacturer’s certificate for load securing in accordance with VDI 2700, Sheet 12 ff. Pallet stops on both sides, approx. 20 mm high; loading height is reduced by approx. 20 mm Paint Finish Frame Hot-dip galvanized, including passivation Front corner posts Hot-dip galvanized Front wall Aluminum Rear corner posts Hot-dip galvanized Rear wall White

Condition: used, machine/vehicle number: 331, empty load weight: 2,700 kg, maximum load weight: 15,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2012, suspension: air, tire size: 385/65 r 22,5, color: black, Equipment: ABS, * Disc brake * EBS * BPW axles * Lifting and lowering device Gsdpfjmcchusx Angouh Errors excepted

Condition: used, mileage: 128,118 km, power: 110 kW (149.56 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 8,200 kg, overall weight: 18,000 kg, color: white, gearing type: automatic, emission class: euro3, Year of construction: 2008, Truck F. ATL Swap body lift truck Kamag Wiesel WBH 25 Engine damage! Engine has been running / little power Diagnosis Metal splinter in fuel filter and pre-filter Engine removed on pallet! Year of construction 2008 Unladen weight 8200Kg permissible total weight 18000Kg LxWxH 9300mm x 2550mm x 2900mm Euro 3 1st hand Guedjqxuadopfx Angjh Kilometers according to previous owner 128118 You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, mileage: 925,000 km, power: 95 kW (129.16 HP), first registration: 04/2004, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 18,000 kg, overall weight: 27,500 kg, tire size: 295/60r22.5, axle configuration: 2 axles, wheelbase: 4,800 mm, color: white, gearing type: automatic, emission class: euro3, suspension: air, Year of construction: 2003, operation weight: 18,000 kg, Equipment: additional headlights, hydraulics, trailer coupling, Material handling machines for moving containers, trailers, and semi-trailers. Bosch Rexroth hydrostatic transmission. Mercedes OM904LA engine. From 18,500 operating hours. Registered versions available, usable with a Class B driver's license. Various models available, with and without a fifth-wheel coupling for semi-trailers. Gjdspa Uyljpfx Angjuh

Condition: used, machine/vehicle number: NEW-4, maximum load weight: 13,000 kg, overall weight: 16,000 kg, first registration: 06/2010, loading space length: 7,250 mm, loading space width: 2,450 mm, loading space height: 2,750 mm, Year of construction: 2010, * Year of construction: * Type Krone WK 73 RST * Fixed roof * Telescopic support legs * Aluminum roller door * Double floor * Total weight: 16,000 kg * Empty weight: 3280 kg * Payload: 12,720 kg Guodpfx Ajp R Rxgsngsh * Internal dimensions: L=7250 mm, W=2480 mm, H=2750 mm * Floor is made of screen-printed floor * Insides are made of keyhole sheet metal Several swap bodies in stock at all times, Jumbo and Standard IMAGES ARE EXAMPLE IMAGES Delivery possible for an additional charge Financing possible on request If you have any questions, please contact us at Opening times: Mon.-Fri. 8 a.m. to 2 p.m. Or by arrangement Price is NET If you purchase several swap bodies, the price is negotiable Invoice with VAT shown will be issued upon sale. Location: Im Gewerbepark 11 99441 Umpferstedt

Condition: used, machine/vehicle number: 468, empty load weight: 2,810 kg, maximum load weight: 15,190 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2007, suspension: air, tire size: 455/40 r22,5, wheelbase: 5,000 mm, color: black, Equipment: ABS, * Disc brake * EBS (Electronic Braking System) * SAF axles Gusdpfx Aelgzt Rongoh * Lifting and lowering mechanism Errors and omissions excepted.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Gujdpfok Unitjx Angeh Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: used, machine/vehicle number: 3, empty load weight: 5,000 kg, maximum load weight: 33,000 kg, overall weight: 38,500 kg, axle configuration: 3 axles, first registration: 09/2019, loading space length: 9,200 mm, loading space width: 2,549 mm, suspension: air, tire size: 385.65 r 22.5, color: black, Year of construction: 2019, Equipment: ABS, serious extendable container porrtacontainer semi-trailers, year 2019, 3 saf disc axles with 1st liftable, front and rear double extension extendable chassis by joining the extensions with central beam, transports containers from : 1 x 20 flush post 1 x 20 flush post over neck, 1 x 30, 1 x 40, 1 x 45, hi cube and swap bodies from 6.0m to 13.60m, ship hooks , ADR complete, n°3 equal units available except sold-CONCESSIONARY INTERDRIVE SRL-PARMA Gujdpfeqvl Sfjx Angeh

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without edge reinforcement, the loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend as a cable guide - flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Trailer hitch Trailer hitch ball head D24.8:, trailer load 2,800 kg, incl. mounting and electrical system with 7-pole socket Accessories/Conversions 2 holders for wheel chocks, aluminum side impact protection, foldable - to be taken over from the truck! Steel under-run protection, quarter-shell mudguards with mud flaps - to be taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 bracket for 3 x petrol cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with a polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing collars on the back (splash-proof according to technical possibility) Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front panel switched via parking lights with a switch on the front panel, outside on the front left, 1 LED work light, at the rear, with integrated rear view camera Incl. with color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage converter 24/12V, 1 7-pole 12V socket = adapter plug Floor Mega Grip made of interlocking, galvanized grating, steel grating 50/4 Incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, running continuously over the entire main frame platform Tie-down rings 12 pairs of tie-down rings in the outer frame, freely pivotable - 10 tons each. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the middle of the floor, 5 tons each Front panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. 2 x 12 lifting brackets for tie-down chains, mounted on the left and right on the front panel Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle on the front panel, operated with a remote control, cable length min. 35 m x 9.5 mm, with cable window, with cable pressure plate, incl. overload protection, cable free-running coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating instructions Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair, electro-hydraulically foldable and laterally movable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp support made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 lashing straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support legs, foldable at the rear + length adjustable, Guodpfsi Riytex Angjh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,900 kg, maximum load weight: 20,100 kg, overall weight: 24,000 kg, axle configuration: 3 axles, total length: 9,200 mm, total width: 2,550 mm, total height: 1,180 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis – Turntable Swap Body Trailer Heavy-duty fine-grain steel welded construction Adjustable and foldable front stop 2 pairs of removable guide rollers (front and rear) 4 container twist locks with reinforced outriggers on a 20" base for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball-bearing ring 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half-shell mudguards (front and rear) 2 lockable stainless steel toolboxes (600 × 400 × 500 mm) with polished doors 1 pair of double LED illuminated rear warning panels, extendable to 3,000 mm Electrical connector prepared for customer-installed front warning panels # Drawbar Drawbar with certified 40 mm towing eye Mechanically adjustable drawbar length (6 × 100 mm positions), approx. 1,900–2,500 mm Spring-assisted drawbar height adjustment # Axles + Suspension BPW disc brake axles with 430 mm brake discs Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension with raise/lower valve # Wheels and Tyres 385/55 R22.5 tyres (manufacturer's choice) Factory silver steel rims Gsdpfx Anezndmzjgeuh # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings with connecting lines to the towing vehicle Electronic Braking System (EBS) with front connector and connecting cable Note: Trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights Removable rotating beacon 1 LED rear work light, activated via reverse gear 2 LED side work lights (left and right), activated via reverse gear 1 × 15-pin front connector with connecting cable # Registration Prepared for registration in Germany DEKRA approval and certificate according to §13 EC-FGV 24/7 service hotline Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Finish Frame hot-dip galvanized with passivation, including 15-year anti-corrosion warranty Drawbar KTL-coated in black Please note: Archive photos shown – actual vehicle may differ.

Condition: used, Year of construction: 2010, overall weight: 16,000 kg, maximum load weight: 12,250 kg, empty load weight: 3,750 kg, loading space width: 2,490 mm, loading space length: 7,250 mm, loading space height: 2,400 mm, Equipment: cooling unit, GERMAN DEALER offers: BDF refrigerated box body Guodez Rqwwspfx Angsh Carrier 750 unit in working order 2 rows of lashing rails Baseboard protection strip Telescopic support legs 16,000 kg gross vehicle weight 3,750 kg unladen weight Year of manufacture: 11/2010 Interior dimensions: 7250x2490x2400 mm Many interchangeable platforms and chassis are in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY IS POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: used, empty load weight: 1,900 kg, maximum load weight: 14,100 kg, overall weight: 16,000 kg, total length: 7,700 mm, total width: 2,480 mm, GERMAN DEALER offers: BDF 7.82m platform Galvanized Tie-down points Suitable for crane loading 7700 mm x 2480 mm Multiple units available Many interchangeable bodies and trailers in stock! Gjdpfx Anjz Rqwqjgeuh ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN SUPPLYING SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: used, machine/vehicle number: 348, empty load weight: 2,740 kg, maximum load weight: 15,260 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2003, suspension: air, tire size: 385/65 r22,5, wheelbase: 4,900 mm, color: grey, Equipment: ABS, Disc brake EBS Lifting and lowering device SAF axles Errors excepted Gujdpfxon I Rl Ao Angeh

Condition: used, maximum load weight: 13,150 kg, overall weight: 16,000 kg, first registration: 01/2019, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,490 mm, loading space volume: 44 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2019, Vehicle No. G0122151_2 - Manufacturer: Spier. Godpsz Nu Hysfx Angjuh * Outline marking on side/rear * Roller shutter door (aluminum) * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing points 3 rows of rod lashing rails. Financing available upon request. Financing possible. Smooth furniture floor. Interior lining with needle felt. Delivery time: IMMEDIATELY AVAILABLE. Furniture fittings. Newly painted. Technically ready for use, body and support legs newly painted. Substructure galvanized. Valid UVV (accident prevention regulations). UVV documents available. Interchangeable platform body newly painted in pure white (RAL 9010). PAINT NEW!!! Dimensions are approximate. Offer subject to change, prior sale reserved. Prices are net ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: new, machine/vehicle number: 002, overall weight: 18,000 kg, tire size: 445/45r19.5, color: black, Year of construction: 2026, Equipment: ABS, center pivot plate, Krone interchangeable semi-trailer, type AZW 18 eL3B7; - New vehicle - turntable - GVWR 18,000 kg - for parking height 1020-1320 mm - unladen driving height 1080 mm - 40 mm drawbar eye - BPW axles 2x9 tons, disc brakes, offset 120 - lifting and lowering - tire size 445, customer's choice of manufacturer - alternatively also available with 435/ - E-wheel holder - ABS-EBS - KTL primed and powder-coated, deep black Prices are quoted excluding 19% VAT, ex works. Offer is subject to change, errors and omissions excepted, and subject to prior sale. Gusdpog Dkwvsfx Angsh Leasing/financing/hire purchase are possible, subject to credit check. Leasing from EUR 294.00 per month, plus 19% VAT. We are available to answer any questions you may have at any time. Images are for demonstration purposes and may show optional equipment that is subject to an additional charge.

Condition: used, functionality: fully functional, machine/vehicle number: 1412A1, mileage: 48,477 km, power: 163 kW (221.62 HP), first registration: 07/1999, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro2, Year of construction: 1999, Equipment: ABS, all wheel drive, compressor, trailer coupling, TUV and AU are made NEW ! ! Special army version with long wheelbase and leaf springs r 16.222 FA is in a super good condition, also the body is in a super condition ! ! ! The MAN are directly from the military in original condition ! ! ! ! Ready for immediate use, was very well maintained and serviced by the military !!! Equipped with: Manual gearbox with 8 gears plus off-road reduction , tipper cab , permanent all-wheel drive with differential lock center and rear , 7 tons winch, which can pull either forward or rearward , plastic shelter with large air conditioning system (inside dimensions L / W / H 4890 / 2020 / 1940 mm).e L/W/H 4890 / 2020 / 1940 mm)this sits on a frame with storage boxes at the front and balcony with railing at the rear, the frame is fastened with 4 twistlocks, the MAN has 8 twistlocks on which a 1 x 20 foot container or 2 x 10 foot containers can be fastened and has a double-axle. Container can be attached and has the dimensions L/W 5850 x 2255 mm and 2 x 2790 x 2255 , the MAN 16.222 has a military trailer hitch with test mark , think that the Tuv will register you on request , diesel engine with 6871cm? displacement, (truck approval 3 seats in front), super good tires with the size 365 / 85 R 20, and much more. Ideal as a rally vehicle or hobby vehicle, WOW and a huge pleasure to drive! ! ! Several other all-wheel drive vehicles and other military vehicles are still available in my offer. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call . - Many greetings from Philipp in the Hanfbach valley Godpfjqx Sxtex Angjuh

Condition: used, first registration: 11/2007, total width: 2,550 mm, Key Features Internal Reference: 24442M Chassis Number: 150 265 07 Vehicle Model: Interchangeable platform body / Swiss Vehicle Vehicle Make: Lanz-Marti Product Category: Interchangeable platform with platform body Condition: Used Date of first registration: 15.11.2007 Godpfx Anoz Hp A Negsuh Weights & Dimensions Vehicle Width: 2550 Superstructure Superstructure Manufacturer: LANZ+MARTI Superstructure Model: Interchangeable platform body Year of Superstructure Manufacture: 2007

Condition: used, empty load weight: 1 kg, maximum load weight: 15,999 kg, overall weight: 16,000 kg, axle configuration: 2 axles, first registration: 06/2011, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, loading space volume: 45 m³, total length: 7,300 mm, color: white, Year of construction: 2011, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 40219 Wecon, BDF interchangeable body * Year of manufacture: 2011 * 7.45 m * Retractable lashing eyes * Portal door * Telescopic support legs * Galvanized * Rail-transportable / craneable * Other * Total weight: 16,000 kg * Tare weight: 1 kg * Payload: 15,999 kg * Permissible total weight: 16,000 kg * Internal dimensions: L = 7300 mm, W = 2480 mm, H = 2520 mm * Internal volume: 46 m³ * Dimensions of corner brackets: E = 5853 mm * Dimensions of overhang: 799 mm * Pallet spaces: 18 * Standard interchangeable body 7.45 m Disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. Guedpfx Aez I Igvsngjh * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 2010, color: white, overall weight: 16,000 kg, maximum load weight: 15,999 kg, empty load weight: 1 kg, loading space volume: 45 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, first registration: 06/2010, axle configuration: 2 axles, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41199 Wecon, BDF interchangeable body * Year of manufacture: 2010 * 7.45 m * New tarpaulin * Neutral tarpaulin * Edscha / sliding roof cover * Load securing certificate DIN EN 12642 Code XL Godpfxoz I Igio Angsuh * Lashing eyelets in the outer frame (Multilock outer frame) * Retractable lashing eyes * Portal door * Telescopic support legs * Galvanized * Rail transportable - craneable * Other * Total weight: 16,000 kg * Tare weight: 1 kg * Payload: 15,999 kg * Permissible total weight: 16,000 kg * Internal dimensions: L=7300 mm, W=2480 mm, H=2520 mm * Internal volume: 46 m³ * Dimensions of corner fittings E=5853 mm * Dimensions of overhang: 799 mm * Lowering height: 1320 mm * Pallet spaces: 18 * Wecon type WPR 745 * Standard interchangeable body 7.45 m Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: used, maximum load weight: 12,780 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,745 mm, loading space volume: 52 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2016, Vehicle No. G0124136_1 – Manufacturer: Krone. * Simple corner fittings * Insertion bar (aluminum) * Outline marking on the side/rear * Load certificate Code-XL * Keyhole system inside * Side sliding tarpaulin * Forklift accessible * Fixed support legs * Device for rail loading * Lashing recesses * Lashing options Godpfxez Hhzqj Angouh Financing available upon request. Delivery time: IMMEDIATELY. New tarpaulin. Newly painted. Technically ready for use, body and support legs newly painted. Door seals NEW! Undercarriage (KTL) cleaned and treated with underbody protection. Valid UVV (occupational safety inspection). UVV documents available. The interchangeable body has been newly painted in pure white (RAL 9010). PAINT NEW!!!. LASI CODE XL!!!. Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request via telephone or email.

Condition: used, Year of construction: 2000, color: black, overall weight: 16,000 kg, maximum load weight: 12,842 kg, empty load weight: 3,158 kg, loading space volume: 57 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 3,000 mm, first registration: 06/2000, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 41819 Wecon, BDF interchangeable body * Year of manufacture: 2000 * 7.82 [m] * Used tarpaulin * Fixed roof * Retractable lashing eyes * Pallet stop rail * Mechanically operated lift-up roof * Portal door * Profiled wooden planks * Telescopic support legs * Galvanized * Rail-loadable / craneable * Other * Total weight: 16,000 kg * Tare weight: 3,158 kg * Payload: 12,842 kg * Permissible total weight: 16,000 kg * Internal dimensions: L = 7700 mm, W = 2480 mm, H = 3000 mm * Internal volume: 57 m³ * Dimensions of corner brackets: E = 5853 mm * Dimensions of overhang: 983 mm Gusdpsz Humtofx Angjh * Lowering height: 980 mm * Pallet spaces: 19 * Wecon WPR 782 BDF Jumbo Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: excellent (used), functionality: fully functional, mileage: 703,000 km, power: 338.33 kW (460.00 HP), first registration: 05/2025, fuel type: diesel, maximum load weight: 8,900 kg, overall weight: 18,000 kg, tire size: 315/17r22.5, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: ABS, air conditioning, compressor, cruise control, onboard computer, traction control, DAF XF460 FA - 180 Q.li – FULL AIR SUSPENSION – Trailerable CHASSIS XLRAEH4300G153953 - REGISTRATION FJ211ZP Year 30.05.2017 – EURO 6 – 703,230 KM Tyres: Size: 315/70 R22.5 – 80% worn Wheelbase 5,400 mm – Payload 89.70 Q.li Guodpfxsx Azqtj Angsh Truck equipment: Sleeper cab with double bed, automatic climate control, fridge, sunroof, electric windows, air-suspended and heated seat – 620-liter tank – Webasto heater Body configuration: SWAP BODY – Mounting distance 586 cm TRAILER COUPLING – ROCKINGER type 500 at 66,000

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, tire size: 385/55r22.5, Year of construction: 2026, Equipment: ABS, Krone interchangeable trailer, type ZZW 18 eLE10; - New vehicle - tandem axle - GVWR 18,000 kg - for coupling height 1070-1320 mm - unladen ride height 1090 mm - 50 mm drawbar eye, extendable 4x100 mm - BPW axles, 2x9 tons, disc brakes, offset 120 (partially also with SAF axles) - lifting and lowering - tire size 385/ Krone Easy Rider - alternatively also with 435 or 445 tires - electric wheel chocks - ABS-EBS - warning signs ECE-R70, 2 pieces - KTL primed and powder-coated, deep black Prices are quoted excluding 19% VAT, ex works. Offer is subject to change; errors, modifications, and prior sale are reserved. Leasing/financing/hire purchase is possible, subject to credit check. Leasing from EUR 344.00 per month plus 19% VAT. Gujdpjg Dkwnefx Angoh We are available to answer any questions you may have at any time. Images are for demonstration purposes only and may show optional extras at an additional cost.