Used Idroenergy 33.0 & 35.0 for sale (66)

Year of construction: 2023, condition: new, functionality: fully functional, Containerized Pure H2 Production System, capacity 45 Nm3/h Composition of H2 Production System: Lajdpfx Abexfvnfezsg - 40' Double Door Container - H2 generator mod 33.0 single cell (capacity 22.0 Nm3/h) and H2 generator mod 35.0 single cell (capacity 23.2 Nm3/h) - 2x Demineralizers OSMODEMI30 H2 Generator mod 33.0 single cell Standard H2 Production: 22.0 Nm3/h - Max flow 24 Nm3/h H2 Purity: 99.5% Max oxygen content (O2 in H2): 0.5% Pressure: 5 bar g Electrical voltage: 400Vac 3 ph 50 Hz Max electrical consumption: 119 kW (at max H2 production) Max demineralized water consumption: 18 l/h (at max H2 production) Max demineralized water conductivity:

Condition: used, Year of construction: 2022, cooling capacity: 241 kW (327.67 HP), type of cooling: water, empty load weight: 2,200 kg, We are offering directly on behalf of the owner: DAIKIN EWAT240B-SLB2016 – air-cooled chiller Manufacturer: DAIKIN Type: EWAT240B-SLB2016 Year of manufacture: 09/2022 Nominal cooling capacity: 241 kW Compressor: 4 × Scroll Refrigerant: R32 Refrigerant charge: 19 kg Temperature range TS: -20 / +150 °C Laedpoz Dx E Iofx Abzeg EQUIPMENT / OPTIONS - OPTION-04 Compressor direct start (DOL) - OPTION-10 Second setpoint - OPTION-128 Master/Slave control, max. 4 units - OPTION-57 Evaporator auxiliary heater - OPTION-60 Electronic expansion valve - OPTION-67 Ambient temperature sensor and setpoint adjustment - OPTION-68 Operating hour counter - OPTION-69 Collective fault message - OPTION-70 External alarm contact - OPTION-97 Main switch - OPTION-11 Thermal protection relay for compressor - OPTION-21 Evaporator flange connection kit - OPTION-58 Evaporator flow monitor - OPTION-61 Hot gas shut-off valve - OPTION-62 Suction gas shut-off valve - OPTION-75 Rubber vibration dampers - OPTION-78 Single pump standard ESP - OPTION-91 Safety valves in double design with changeover valve - OPTION-96 Fan protection switch Weatherproof design: Standard housing with roof Dimensions unit (L x H x W): 2,326 x 2,540 x 2,236 mm Weight: 2,206 kg ELECTRICAL DATA Power consumption: 85.2 kW Voltage: 400 V / 3~ / 50 Hz Rated current: 190 A CIRCULATION PUMP Manufacturer: Wilo Type: IP-E 80/115-2.2/2-IE4 Power input P1: 2.6 kW Speed range: 750–2,940 min⁻¹ BUFFER TANK: FlexTherm PS-K Volume: 1,000 l Including insulation Cooling chamber with coil: Design: WK-com S-W B170/B318 supply air Technical data cooling coil: Air inlet T/RH: 35.0 °C / 40 % RH Air outlet T/RH: 20.0 °C / 82 % RH Medium flow rate: 32,140 / 33,563 l/h or kg/h Capacity: 169.4 kW Control: 3-way valve + control manifold IP69 Switch cabinet for pump and control of the regulation

Condition: excellent (used), Year of construction: 2018, I - beam section - flat steel 120 x 15 (d 750) mm I-beam section - upend 60 x 10 (d 800) mm L-beam 50 x 5 (d 1200) mm round material 35.0 (d 800) mm bar material dia. max. 70 x 2 (d 1200) mm square material 50 x 40 x 3 mm bending speed 4.3 m/min roll diam. toproll 155 mm bore 50,0 mm total power requirement 1.5 kW weight 320 kg range L-W-H 730 x 830 x 1350 mm Exhibition machine from 2023 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller Lsdpozyvbnjfx Abzjag - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Condition: good (used), mileage: 130,465 km, power: 265 kW (360.30 HP), first registration: 03/2013, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel, Year of construction: 2013, Equipment: AdBlue, Bluetooth, EBS, air conditioning, crane, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - EPS - Low noise - Tipping hydraulics Laodpfxsz Abhfe Abzsg - Particle filter - Radio/CD player - Sunroof - Side door - Toolbox = Further Information = Suspension: Leaf spring Front axle: Steerable Number of cylinders: 6 GVWR: 33,000 kg Crane: Fassi F155A0.22 Active, year of manufacture 2013, behind the cab Technical condition: good Optical condition: good Vehicle number: 123 Mercedes-Benz Actros 3336 / Tipper + Fassi F155 / Bordmatik / Euro 5 / 130,000 km .: WDB9321631L727408 Suspension: Leaf / Leaf Transmission: Semi-automatic Air conditioning Engine brake Cruise control Euro 5 130,000 km 2-sided tipper with Bordmatik system Crane: Brand: Fassi Type: F155A0.22 Year: 2013 Special equipment: Storage compartment on engine tunnel, trailer socket 15-pin 7+7-pin, audio system: CD radio (Bluetooth), exhaust pipe raised behind cab, exhaust pipe raised behind cab, variable, air horn, cab: cab entrance movable, cab: comfort suspension (1.8 Hz), transmission 16-speed, air filter: filter for construction site vehicles, air filter: enlarged paper air filter, parameterizable special module, sun visor, socket in cab 24V, stone guard grid, front bumper in steel design, warning sound for reverse gear, oil cooler for transmission Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2 - line, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, battery 165 Ah, roof hatch (steel), differential lock rear axle, cab: M (medium length), suspension: leaf / leaf, generator 80 A, rear axle H 7, 13 t, crown wheel 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, fuel tank: 300 L, model upgrade from 06/2008, engine 12.0 L - 265 kW V6 Diesel (OM 501 LA), engine brake with constant throttle, auxiliary drive MB 2C, wheelbase 3900 mm, rear window, disc brake front axle, seats in cab: driver's seat, sprung seat, standard, steel rims 9.00x22.5, Telligent - gearshift, drum brake rear axle, preparation for CB radio, preparation for telephone/fax, front axle straight, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 33.0 t No liability for printing and typographical errors, changes, prior sales and errors! = Company Information = No liability for printing and typographical errors, changes, prior sales and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Year of construction: 2023, operating hours: 48 h, condition: like new (used), The combi-steamer is virtually new and has an operating time of 48 hours, as tested in our workshop. RATIONAL iCOMBI PRO 202 TECHNICAL DATA: Connection rating: 400 V / 67.9 kW Fuse protection: 3 x 100 A Cable: 5 x 35.0 mm² Water inlet: Ø 1/2" Connection fitting: 3/4" Water outlet: DN 50 Temperature range: 30 °C to 300 °C Dimensions (mm): W 1082 x D 1117 x H 1807 Net weight: 336 kg FURTHER INFORMATION: Temperature range: 30 °C to 300 °C Detects current conditions inside the cooking chamber Identifies product size, load, and status to determine browning Laodoxgvkvspfx Abzeg Learns frequently used cooking habits Determines the ideal cooking process for the desired cooking result MyDisplay – self-adjusting, user-friendly control panel

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: Laodpexc N Rhsfx Abzjg I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: ready for operation (used), Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Equipment: Lajdpfx Abszy Sdxozjg - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 06/1992, total length: 9,980 mm, total width: 2,550 mm, suspension: air, tire size: 385/60 R22.5, wheelbase: 6,900 mm, color: other, Year of construction: 1992, Axle Configuration Tire Size: 385/60 R22.5 Axle Brand: SAF Brakes: Disc Brakes Suspension: Air Suspension Rear Axle 1: Max. Axle Load: 10,000 kg; Tire Tread Depth Left: 20%; Tire Tread Depth Right: 20% Rear Axle 2: Max. Axle Load: 10,000 kg; Steerable; Tire Tread Depth Left: 20%; Tire Tread Depth Right: 20% Weights Unladen Weight: 7,020 kg Payload: 27,980 kg GVWR: 35,000 kg Condition Damage: None Laedpsz A A Nnsfx Abzjg Identification License Plate: OB-73-XY

Condition: used, mileage: 35,000 km, power: 161 kW (218.90 HP), first registration: 11/2001, fuel type: diesel, tire size: 295/80 R 22.5, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 2001, = Additional options and accessories = - 4x2 - Leaf spring suspension - Mechanical tachograph - Power take-off (PTO) = Further information = Lodsz Dkmwopfx Abzoag Tire size: 295/80 R 22.5 Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle: Dual tires; Tire tread depth left (inner): 70%; Tire tread depth left (outer): 70%; Tire tread depth right (inner): 70%; Tire tread depth right (outer): 70%; Reduction: single reduction Damage: none

Condition: good (used), Year of construction: 2006, Boring power 35.0 / 40.0 mm bore capacity in cast iron 50.0 mm threading M 30 bore stroke 150 mm Size of table plate 730 x 210 mm Center of spindle to wall or column 280 mm Speed 80.0 - 1.400 U/min distance spindle /table 85 - 755 mm spindle taper MT 4 MK column diameter 120 mm feed 0.1 / 0.2 / 0.3 mm/U voltage 400 V Motor output 1.3 / 2.3 KW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop Lsdpfxezl E Ubo Abzsag - Stepless speed adjustment - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF)

Condition: good (used), Year of construction: 1979, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 110 - 1450 U/min table-size Ø 455 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 m/min spindle taper MT 4 MK engine output 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Laedpezl E Tkjfx Abzeg Features: - Heavy-duty column drill press (V-belt drive) - Automatic spindle feed - Infinitely variable speed control - Fixed depth stop - Round machine table with T-slots * Height-adjustable via hand crank * Rotatable - Emergency stop button on the front - Coolant system with separate reservoir - Operatorâ??s manual

Condition: used, mileage: 350 km, power: 375 kW (509.86 HP), first registration: 12/2025, fuel type: diesel, axle configuration: 3 axles, wheelbase: 3,900 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: air conditioning, crane, cruise control, Mercedes Benz Arocs5 3351 AK 6x6 with Meiller three-way tipper D316 and Palfinger PK 33002 EH loader crane, equipped with secondary water retarder, M-driver's cab Classic Space 2.30m, 320mm tunnel, 3,900mm wheelbase, engine 375 kW (510 hp), driver's seat with leather upholstery, CB radio, air conditioning, front face variant 35.0 t (9.0/13.0/13.0), engine 12.8 L, 375kW (510 hp), 2500 Nm, Euro VI, E drive train, GVW 44 t to 68 t, PowerShift 3 offroad driving program, PTO pump below frame upper edge, front axle differential lock, front tires 385/65 R 22.5, rear tires 315/80 R 22.5, fuel tank 290 l, AdBlue tank 60 l, central axle trailer coupling D50, Rockinger drum brakes on front and rear axles, electronic braking system with ABS and ASR, secondary water retarder, ClassicSpace cab 2.30 m, 320 mm tunnel, comfort cab suspension (steel sprung), light and rain sensors, roof hatch, air horn, 4 remote control keys, central locking comfort locking system, comfort air-sprung driver's seat, functional passenger seat, driver’s seat in leather, passenger seat in velour, leather steering wheel, driver-side sunblind, pre-installation and display for up to 4 cameras, reversing alarm, interactive multimedia cockpit, Truck Data Center 7, CB radio 24 V, air conditioning, compressed air connection in cab, LED daytime running lights, LED beacon, cruise control, Bordmatik, air gun, ATS warranty as per T&Cs, 3 years / 250,000 km. Crane installation behind cab: - Hydraulic support legs, extra long, hydraulically extendable - Hour meter, crane operating hours counter (digital or readable via PALdiag) TRAN2 - Radio remote control, 6 functions MOT01 - Ergonomic control panel for crane operation - Crane/support switching at control panel. With daily registration. Laedoxb Umlopfx Abzsg

Condition: excellent (used), mileage: 168,410 km, power: 500 kW (679.81 HP), first registration: 10/2021, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: intarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,000 mm, loading space width: 2,500 mm, Year of construction: 2021, operating hours: 2,081 h, Equipment: ABS, AdBlue, air conditioning, electric window regulation, = Additional Options and Accessories = - Aluminum fuel tank - High beam headlights - Low noise - Air suspension - Rear view camera - Sun visor - Toolbox - Power take-off (PTO) = Additional Information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 21,600 kg Payload: 10,400 kg GVWR: 32,000 kg Functional Mast: Telescopic (13 sections) Lifting capacity: 12,900 kg Superstructure brand: PALFINGER PK 65002-SH F +PJ 125E CE marking: yes Condition Technical condition: very good Optical condition: very good SCANIA P500 8x2*6 WITH PALFINGER PK65002-SH F POWER LINK PLUS + PJ125 E JIB CRANE An excellently equipped Scania P500 8x2*6 with a Palfinger PK65002-SH F Power Link Plus loading crane and PJ125 E jib, combining highest performance, reach, and versatility. This impressive combination is ideally suited for construction, industrial, infrastructure, and assembly applications where maximum lifting capacity and large reach are required. Powered by a powerful 500 hp Scania engine and equipped with a modern Palfinger crane system with 13 hydraulic extensions, a winch, and radio remote control, this vehicle is immediately ready for the most demanding lifting and transport tasks. Vehicle data Scania P500 Euro 6 L-package 500 hp engine Drive: 8x2*6 Wheelbase: 4,800 mm Air-suspended chassis Technically permissible total weight: 35,000 kg Automatic transmission with retarder Trailer coupling P cab Air conditioning Navigation system Telephone preparation Rear view camera Rotating beacon Air horns Open loading area Length: 6.00 m Width: 2.53 m Several toolboxes Crane specification Palfinger PK65002-SH F Power Link Plus + PJ125 E Jib 13 hydraulic extensions Hydraulic winch 4-point hydraulic outriggers Radio remote control Maximum lifting capacity: 12,900 kg Lifting capacity at 18.2 m: 2,500 kg Laodpfx Abezc U Dzezjg Lifting capacity at 31.0 m: 470 kg Maximum working height: 35.0 m Highlights High-performance loading crane with large reach Excellent lifting capacity over the entire working range Fully operable via radio remote control Ideal for construction, industrial, and assembly applications Comfortable and comprehensively equipped cab Ready for immediate use This Scania P500 with Palfinger PK65002-SH F Power Link Plus and PJ125 E jib offers a perfect combination of transport capacity and state-of-the-art crane technology. An excellent choice for companies that expect maximum performance, reliability, and efficiency. For further information or to arrange a viewing appointment, please do not hesitate to contact us. Follow us on Instagram: @geurtstrucks We speak German We speak English Hablamos Español

Condition: used, Year of construction: 1996, cutting diameter / mm saw band length / mm cutting width / mm Lsdpfozu A Tyox Abzoag Manufacturer: KASTO Type: HBA 360 AU Year of manufacture: 1996 Machine number: 6016 109 181 Weight: approx. 2,600 kg Electrical connection: 400 V Frequency: 50 Hz Power supply: 3~ (three-phase current) Connected load: 10.0 kW Rated current: 35.0 A Maximum cutting range: approx. 360 × 360 mm Maximum round cut: approx. 360 mm Saw band length: approx. 5,334 mm Saw band dimensions: approx. 41 × 1.30 mm (depending on version) Cutting speed: approx. 14–102 m/min Automatic material feed: approx. 600 mm stroke Saw band drive: approx. 5.5–6.0 kW Version: automatic high-performance band saw machine Suitable for sawing round, square, and profile material CE marking present Note: The technical data listed above has been compiled based on the nameplate of the specific machine and available information regarding the KASTO HBA 360 AU. Individual technical specifications may vary depending on the year of manufacture, serial number, and equipment configuration. SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: ready for operation (used), Year of construction: 1995, pressure 35.0 t plate thickness max. 8.0 mm throat 830 mm diameter of seal max. 105 mm table: 1500 x 1200 mm work height max. 920 mm die stroke ca. 90.0 mm strokes per minute ca. 200 Pressure power 220 bar oil volume 80.0 l total power requirement 4.0 kW weight of the machine ca. 3200 kg range L-W-H 1600 x 1800 x 1800 mm The IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force. Features: - Electro-hydraulic punch press with long reach - Robust C-frame construction * Solid cast or welded frame (C-shape) * Extremely high punching precision * Compact design = small footprint Lsdpfszf Nrkox Abzoag * Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable controller for: * â??top dead centerâ? - Continuously adjustable control for: * â??bottom dead centerâ? - Digital position display - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter (max.): 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Bending speed 10.0 rpm Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Lsdpewvrazofx Abzeag Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x powered rollers (MR2 series) - segmented roller dies - digital position display for top roller (0.1 mm) - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel - CE marking

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SN24027024146, Year of construction: 2024, total length: 580 mm, total height: 910 mm, total width: 700 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Installed nozzle diameter: 0.4 mm MACHINE DETAILS Voltage supply: 100–240 V AC Power consumption: Max. 10 A Mains frequency: 50–60 Hz Frequency band: 2,400.0–2,483.5 MHz Max. radio frequency output power: < 100 mW EIRP WLAN standard: IEEE 802.11 b/g/n Operating temperature: 18 °C for PLA up to 38 °C Max. humidity: Max. 85 %, non-condensing Dimensions & Weight Dimensions (W x D x H): 580 x 700 x 910 mm Weight with packaging: Max. 35.0 kg Weight without packaging: Max. 25.3 kg EQUIPMENT Satin powder-coated print bed PEI print bed Spool holder with material guide Power cable Lasdjzx S Easpfx Abzog USB drive 5 × brass nozzle, 0.4 mm 5 × hardened nozzle, 0.6 mm Operating manual Testing information Note: Print head cable 3 must be replaced.

Condition: as good as new (ex-display), Year of construction: 2025, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2170 mm Year 2025 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device Lajdpfxexaabro Abzeg - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) Ljdezh Hlaepfx Abzsag • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 units of horizontal, transversely divided spiral casing pump in process design, with radial impeller, single-stage, single-suction. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with seal water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! The nameplate indicates the operating parameters. This is not the actual flow rate at the best efficiency point !!!! I have attached 2 characteristic curves as photos. Photo 11: Best efficiency point Photo 12: Operating parameters from the last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data for the operating point in the last application, approximately: Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Spiral casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Remaining parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency class: IE 2 Voltage: 400/690 Volts Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry Ledpjfyn Rpefx Abzoag - Mining/coal extraction and transport - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering ! Price per unit !

Condition: ready for operation (used), Year of construction: 2003, pressure 35.0 t chamfer lenght 1250 mm Ljdpfxjx Dc Uve Abzsag distance between columns 1095 mm stroke - stepless adjustable 215 mm column arm 410 mm table height 800 mm dayligth 455 mm working feed 10.0 mm/sec return speed 56.0 mm/sec work height max. ca. 875 mm Control DM 51 Number of working hours ~ 13.300 h oil volume 80.0 l operating pressure max. 240 bar voltage 380 V total power requirement 4.0 kW weight 2500 kg range L-W-H 1700 x 1450 x 2250 mm - in checked conditions - machinevideo - ?v=Gn6PZEMmnmY Features: - Robust CNC-controlled hydraulic press brake - With DELEM CNC control unit “DM 51” * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Program + tool storage possible * Swiveling control panel, front left - CNC electric motor-driven backgauge (X axis) - CNC electric motor-driven height adjustment of the stop (R axis) - 2x manually adjustable stop fingers - 1x split set of deer foot tools - top - 1x split set of Multi V tools - bottom (16/22/35/50 mm) - Side safety device (swivel doors) + FIESSLER laser safety device - Rear safety device (swivel door) - 1x freely movable double foot switch - 2x front support arms - Machine operating instructions + CE declaration

Condition: used, maximum load weight: 27,560 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 10/2012, Equipment: ABS, Attention: Accident damage, conditionally roadworthy. Equipment: * 2-axle steel tipper body, * Air suspension, * BPW axles, * Support legs, * Drum brakes, * ABS, EBS, * Roller cover, * Foldable underrun protection, * Aluminum rims * Tires 385/65 R 22.5 Other: * Original German delivery, Ledpfszvitcsx Abzeag * Payload 27,560 kg according to ZLB, * Permissible total weight 33.0 t Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, at the Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly offers approximately 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sales are subject to change.

Year of construction: 2011, condition: like new (used), Universal Grinding Machine from Chevalier apply for toolmaker , mold maker, education and Locksmith Pressure: 60.0 t Square steel: 35.0 mm Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in qmm: Ø28 in 15 / Ø38 in 11 mm Throat: 220 mm Flat steel: 200x20 / 300x15 mm Blade length: 317 mm Oil capacity: 45,0 ltr. Laodpfx Aoiitwnjbzjg Working height: 940 / 1140 mm Strokes per minute: max. 26 Working stroke: 55,0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimension HxWxD: 1510 x 590 x 1570 mm

Condition: excellent (used), mileage: 35,432 km, power: 159 kW (216.18 HP), first registration: 11/1990, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1990, Equipment: fog lights, = Additional Options and Accessories = - Side door - Toolbox = Further Information = Axle configuration Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 10,435 kg Payload: 1,565 kg GVW: 12,000 kg Lodpfx Abezrh Tyjzeag Environment Emissions class: Euro 0 Maintenance, History, and Condition APK (Technical Inspection): Valid until 05/2027 Technical condition: very good Optical condition: very good Identification Reference number: 12 Vehicle number: 12 Daimler-Benz / 1222 V6 / 4x4 All-wheel drive / Winch / 35,000 km / Fire brigade vehicle / Vintage vehicle .: WDB61526415463873 TÜV: 05/2027 - Inspection due: 11/2026 Transmission: Manual transmission Suspension: Leaf / Leaf Fire brigade vehicle Winch 35,000 km No liability for printing and typographical errors, changes, prior sale, and errors. = Company Information = No liability for printing and typographical errors, changes, prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: excellent (used), Year of construction: 2020, Equipment: Integrated dispensing pump/dosing module for rinse aid Integrated dispensing pump/dosing module for liquid detergents Washing chamber made of high-quality stainless steel Spray arm control for all arms Manual hood opening Automatic program start after closing the hood Adjustable final rinse temperature Turbidity sensor Adjustable wash temperature Adjustable wash time Heat recovery from wastewater and exhaust air Steam extraction system Temperature display for tank and boiler Hygienic tank washing chamber Innovative spray arms Pump protection screen Grease filter Extensive accessories (optional) Miele flight-type dishwasher with exhaust and wastewater heat recovery - integrated dosing & water softener, PTD901 SST WES DOS ECO [6.4 kW], 11917950 Always the right program Dish-specific solutions, dish-specific programs. No matter what type of dishware and what kind of soiling: there is an effective program for every requirement. Simple and flexible operation Full-touch display: All important information is quickly and easily accessible via the user-friendly full-touch display. Design and construction Design: Flight-type dishwasher Line Washing system Number of washing levels: 1 Front: Stainless steel Tank volume in liters: 35.0 Application: Suitable for senior and nursing homes Suitable for hospitals Suitable for the catering/bar industry Suitable for the hotel industry Suitable for guesthouses Suitable for communal catering Suitable for kindergartens Suitable for universities and schools Suitable for quick-service restaurants Suitable for sports clubs Equipment: Integrated dispensing pump/dosing module for rinse aid Integrated dispensing pump/dosing module for liquid detergents Washing chamber made of high-quality stainless steel Spray arm control for all arms Manual hood opening Automatic program start after closing the hood Adjustable final rinse temperature Turbidity sensor Adjustable wash temperature Adjustable wash time Heat recovery from wastewater and exhaust air Steam extraction system Laodpfx Aegh Hu Hobzsg Temperature display for tank and boiler Hygienic tank washing chamber Innovative spray arms Pump protection screen Grease filter Extensive accessories (optional) Miele hood dishwasher with rinse aid dispenser Water softening system Washbasin as a side table, left and right for flight-type operation Wash baskets for glasses, plates and pots Connection: 16 Ah