Used Hurco Bmc30Ap for sale (169)

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. Crodpfx Alozylx Aebjg - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2007, x-travel 760 mm y-travel 510 mm z-travel 610 mm 1.020 x 510 mm WINMAX 12.000 U/min 13,5 kW 24 St. SK 40 | | 20 bar 35/35/30 m/min 5,0 t used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling Credpeznnc Tefx Albeg - electric hand wheel

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, controller model: Hurco WinMax V11, TECHNICAL DETAILS Swinging diameter over cross slide: 402 mm Credszy Iknepfx Albeg Swinging diameter: 295 mm Spindle speed (max.): 3,000 rpm Travel in X-axis: 250 mm Travel in Z-axis: 750 mm Driven tools: VDI 40 Speed of driven tools (max.): 4,000 rpm MACHINE DETAILS Control system: Hurco WinMax V11 Machine weight: 5,000 kg EQUIPMENT Renishaw tool measuring arm Internal cooling: 20 bar

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm Csdpfx Ajiv R Hlelborg y-Weg 660 mm z-Weg 610 mm Steuerung Ultimax 4 Tischbelastung 1300 kg Drehzahl 10.000 U/min Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 533 mm Travel distance Y :406 mm Travel distance Z: 483 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Hurco WinMax 9 spindle chuck: BT30 spindle revolutions: 30000 rpm Speed range to: 30000 U/min tool changer: 20 - time spindle cooling chip conveyor Manufacturer: HURCO Model: VM 10 UHSi Year of manufacture: 2013 Crjdpszx T I Njfx Albeg Control: HURCO WinMax 9 Number of axes: 5 X-axis travel: 533 mm Y-axis travel: 406 mm Z-axis travel: 483 mm Spindle speed: up to 30,000 rpm Spindle taper: BT30 Tool changer: 20 positions Equipment: 5-axis machining HSC (High-Speed Cutting) Tool changer Spindle cooling Chip conveyor Tool/workpiece probe Renishaw touch probe The machine is particularly suitable for precise and demanding milling operations as well as applications requiring high spindle speeds.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. • Spindle hours: approx. 12,603 h • Total power requirement: approx. 28 kVA Additional equipment • Chip conveyor • Internal coolant system • with deep-hole drilling cycle function Credpfsy Tw Ryox Albsg Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Type of CNC Table length 762 mm Table width 406 mm Max. part weight 340 kg Number of tool pockets 20 Spindle taper Crodpfx Alozwwndobeg Max. spindle speed 10000 rpm Spindle motor power 11 kW

Condition: used, Year of construction: 2006, Spare parts for Hurco VM1, manufactured in 2006 - VM1 computer with Ultimax 4 - Dual display with 2 monitors, including touchscreen, control panel, and housing with electronics (all as shown in the photos) Everything is fully functional. - F7 spindle drive CIMR-F7UXXXXX-063 AC drive Crjdpozx Sqiefx Albog Software version VSF11006X - VM1 console, Ultimax 4 control panel with keyboard - Power supply for VM1 - Ejector cylinder Prices will be determined upon consultation or by quotation. International shipping can be arranged.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Cjdpjzx N Thjfx Alberg Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 661 mm Travel distance Y :407 mm Travel distance Z: 508 mm Number of axis: 3 Credpfx Alezwnfysbjg milling machine / machining center Control: Hurco Max 5 / WinMax spindle chuck: ISO 40 / DIN 69871 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 762 mm table size Y: 406 mm max. workpiece weight: 1500 kg tool changer: 20 - time input Power : 11 kW Torque: 72 Nm Rapid traverse: 28 m/min spindle cooling chip conveyor CNC vertical machining center HURCO VM10i, year 2016, equipped with HURCO MAX 5 control and WinMax software. Travels X/Y/Z: 661 x 407 x 508 mm. Table size: 762 x 406 mm, max. table load 1,500 kg. Spindle speed up to 10,000 rpm, spindle power 11 kW, torque 72 Nm, ISO 40 tool holder. 20-position automatic tool changer, rapid traverse 28 m/min, coolant system and chip auger

Condition: excellent (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting Crsdpfx Aozwhlaelbjg

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Cjdpfx Aszwhk Nelberg Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Csdezwhk Aspfx Alborg Tool magazine for 24 tools, SK 40 DCF software

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,270 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis Hurco VMX42t was manufactured in 2007. It features an X-axis travel of 1067 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1270 x 610 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX42t vertical machining centre we have for sale. Contact us for further details. - Control System: Ultimax- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 15 KVA- Full Load: 30 KVA- Interrupt Capacity: 10,000 AMPS- Optional Equipment: Chip conveyor, Simulation graphics, Tool and material library, Pocket milling with island, Synchronous thread cutting without compensating chuck, High-pressure through-spindle coolant Crodpfx Aszwgztjlbsg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. Codpey Tw R Hsfx Alberg • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system • The machine has a double-wound AC spindle motor. • The axes are also directly driven. • The machine does not have a direct measurement system. Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating statuswith deep-hole drilling cycle function Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, Equipment: chip conveyor, - Year of manufacture: 2007 - Single-shift operation / individual part production - Good condition and accuracy, inspection possible while the machine is running - 14,151 machining/spindle hours - SK40 12,000 spindle - 24-tool magazine - Travel range X1270/Y661/Z610 - Renishaw NC4 tool measuring probe - Renishaw measuring probe - Minimum quantity lubrication Codpfx Alozxpa Uebjrg - Extensive software package - Without clamping devices

Condition: used, Year of construction: 2022, Technical details: turning diameter: 336 mm turning length: 216 mm weight of the machine ca.: 8,3 t Cjdpfxezv Rgws Albsrg Article: CNC multi-axis lathe Manufacturer: Hurco Model: TMX 8MYSi Year of manufacture: 2022 CNC multi-axis lathe Excerpt from manufacturer’s specifications: Working area: Max. turning diameter: 336 mm Max. swing diameter: 560 mm Main spindle specifications: Max. speed: 4,500 rpm Chuck diameter: 210 mm Tie-bar diameter: 64.5 mm Counter-spindle specifications: Max. speed: 6,000 rpm Tool turret with driven tools Bar-Loading Magazine: SAMSYS M3000 (2022 model) HYDAC Cooler The machine can be visited under power. The tool configuration included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip screw - electronical hand wheel - measuring feeler Renishaw Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Crjdpfx Alsx D A Ddebjg Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Codezl Hbcopfx Alborg Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We offer the following machine directly on behalf of the owner. It was delivered in 2026 but, due to changing requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance between spindle nose and table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000-line look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: Crsdpfxezu Nz Dj Albsg - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 5,000 rpm, travel distance X-axis: 203 mm, travel distance Z-axis: 560 mm, total height: 2,597 mm, overall weight: 8,000 kg, workpiece diameter (max.): 336 mm, number of axes: 4, This 4-axis Hurco TMX 8MYS lathe was manufactured in 2013. It features a maximum turning diameter of 336mm and a swing over bed of 508mm. The distance between centers is 724.5mm, and it includes live tools with 12 positions in the turret. Ideal for precision machining, the Hurco TMX 8MYS machine we have for sale offers robust performance and versatility. Contact us for further details regarding this lathe. Machine Benefits Codpfozvvypox Alborg Technical Machine Benefits • Swing over bed & swing over cross slide: 508mm • W-travel: 640mm • Main spindle 4500 rpm • Sub spindle 5000 rpm • Driven tools 4000rpm Extra Information Machine still under power Dimensions Machine Depth 4261 mm

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, number of axes: 3, This 3-axis Hurco VMX 24 vertical machining centre was manufactured in 2001. It features X, Y, and Z travels of 610 mm each and a tool holder sk40. If you are looking to get high quality milling capabilities consider the Hurco VMX 24 machine we have for sale. Contact us for more information. • Spindle hours: 6,540 hours Crodpjzvl Snefx Albeg • New spindle was fitted in April 2021 • Chip conveyor is located within the working area • The axes were re-measured during the installation of the new spindle and found to be in order Optional Equipment • SK 40 holders • CNC high-pressure clamps (Allmatic and Homge) • Tall cabinets with cutter heads Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Cjdpfx Aljzvd U Uobsrg Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 06584, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: Hurco Ultimax, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Axes: 3 Crsdpszuw A Nofx Albeg Travel in X-axis: 1,020 mm Travel in Y-axis: 510 mm Travel in Z-axis: 610 mm Spindle speed (max.): 8,000 rpm Motor power: 15 kW Table length: 1,220 mm Table width: 510 mm MACHINE DETAILS Control system: Hurco Ultimax Drive system: CNC Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,350 x 2,400 mm Weight: 5,000 kg Shipping packages: 1 EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 1999, Travel X/Y/Z: 610mm/406mm/508mm, max. spindle speed: 8000rpm, spindle power: approx. 7.5kW, rapid traverse X/Y: 24m/min, rapid traverse Z: 15m/min, spindle taper: SK40, tool capacity: 24, table dimensions X/Y: 750mm/400mm, max. table load: approx. 350kg, control: Hurco Ultimax 4 Dual Screen. Weight: approx. 4000kg. An on-site inspection is possible. Csdpfx Aljzwfrqjborg