Used Hp Hp Jet Fusion 3D 4200 for sale (10,426)

Condition: used, functionality: limited functionality, Year of construction: 2019, HP JetFusion 4200 3D printer HP JetFusion 4200 3D printer using polyamide PA12, used very little, put into operation in 2019, including processing station and build unit. Nljdpez Hqtisfx Ag Ieh Price for 1 printer, 1 build unit, and 1 processing station.

Condition: used, functionality: fully functional, machine/vehicle number: SG74S34001, Year of construction: 2017, operating hours: 7,431 h, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, input current: 30 A, HP MULTI JET FUSION 4200 ADDITIVE MANUFACTURING SYSTEM Located in ALBACETE, SPAIN 7,431 print hours · 2 build units · Tested and functional From a professional service bureau that has now closed. Series production of end-use parts in PA12 nylon. === THE SYSTEM INCLUDES === HP Jet Fusion 3D 4200 printer — S/N SG74S34001, P/N M0P44B, built 04/05/2017 HP Jet Fusion 3D Processing Station (powder processing) Build unit 1 — S/N SG74C35005, P/N M0P45B, built 04/05/2017 Build unit 2 — S/N SG74R35003, P/N M0P45B, built 27/04/2017 Extraction system and external powder collection container HP 3D High Reusability PA12 powder in stock, part factory sealed === ACTUAL USAGE DATA === Read directly from the machine's Printer Information screen: Print time: 445,886 minutes, approx. 7,431 hours Jobs: 718 total, 590 completed successfully Layers printed: 2,800,493 Volume printed: 1,308 litres Fusing lamp calibration: valid Material run: HP 3D High Reusability PA12 Last job on record: 1 July 2025 === SERVICE POSITION === Njdoy U H Idjpfx Ag Ielh The HP service contract has EXPIRED. The buyer will need to arrange service and, where HP requires it, recertification on relocation or change of ownership. That cost is not included in our price and is worth budgeting for. The machine has been standing since July 2025. We cannot warrant printhead condition after that time; it would be sensible to plan on replacing them. The agent cartridges are effectively empty (0.2 cc fusing, 0.2 cc detailing). The intermediate tanks hold approx. 1,470 cc and 1,142 cc. HP discontinued this model in October 2024, with supplies and support committed through October 2029. The price reflects this position. === TECHNICAL DATA === Manufacturer: HP Model: Jet Fusion 3D 4200 Year: 2017 Technology: Multi Jet Fusion (MJF), powder bed Printer supply: 9 kW, 220-240 / 380-415 V, 30 A, 3W+N+PE Build unit supply: 3 kW, 200-240 V, 16 A, single phase Approvals: UL E165854, CE, FCC Part 15, EAC Printer dimensions: 2,210 × 1,238 × 1,448 mm === APPLICATIONS === Series production of end-use parts, short and medium runs, functional prototyping, automotive, consumer goods and tooling. High Reusability PA12 allows unfused powder to be recycled between jobs. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE2-HP Serial numbers, plate photographs and the Printer Information screen are available in the attached documents.

Year of construction: 2018, condition: ready for operation (used), An HP additive manufacturing system for PA12 nylon including accessories is available. Printing technology: Multi Jet Fusion, build volume X/Y/Z: 380mm/284mm/380mm, material: PA12 (Nylon 12), machine dimensions X/Y/Z: approx. 2250mm/1250mm/1450mm, weight: approx. 750kg, operating hours: approx. 16300h. Including HP powder processing station, 3x HP build units, 3x printheads, 2x heat lamps and 5x fusion lamps. Documentation available. An on-site inspection is possible. Nedpfx Aezqfwtog Ielh

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,291 h, total height: 1,448 mm, total width: 1,238 mm, travel distance X-axis: 380 mm, product length (max.): 2,210 mm, number of axes: 3, Plastic 3D printer manufactured in 2018. This HP Jet Fusion 3D 4200 features a build volume of 380 × 284 × 380 mm and utilizes Multi Jet Fusion technology for efficient production. It is fully functional and has been in productive operation until June 2026, making it suitable for industrial production of functional end-use parts and prototyping. If you are looking to get high-quality 3D printing capabilities, consider the HP Jet Fusion 3D 4200 machine we have for sale. Contact us for further details. • Technology: Multi Jet Fusion (MJF) • Build Volume (X × Y × Z): 380 × 284 × 380 mm • Material: PA12 (Nylon 12) • Power Supply: 400 V • Electrical Connection: Three-Phase • Total Operating Time: 977453 min (approx. 16291 h) Optional Accessories • HP Processing Station • Function: Powder Processing Station • 3 × HP Build Units • 2 × HP Heating Lamps • 5 × HP Fusing Lamps Machine Condition Nljdpezqtc Dofx Ag Ieh • Fully Functional • No Known Defects • In Productive Operation Until June 2026 • Previous Application: Production of Small and Medium Series of Functional End Parts Additional Information • Suitable for Industrial Production • Material Processing Technology: Powder Bed Fusion (Multi Jet Fusion) • Application: Functional End-Use Parts, Prototyping, Small and Medium Batch Production

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Nljdpfx Agez Nll Hj Ioh Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.

Year of construction: 2019, condition: as good as new (ex-display), ex demo HP 3D hardly used plus accessories located near London Nljdpfelgwb Ssx Ag Ioh

Condition: used, 3D SYSTEMS Type: ProJet 660 Pro 3D printer 3D SYSTEMS 3D printer The ZPrinter ProJet 660 Pro 3D printer features a large build volume. This allows large models to be produced without prior cutting. Furthermore, the large base area increases productivity when printing many small models in a single printing process. 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems," also known as ZPrinters, use a layer-by-layer process based on the ColorJet CJP "Binder Jetting" technology, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. The unconsolidated powder supports the components during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Nlsdpfx Agezdyxro Ieh Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum feature size: 0.1 mm Automation: Fully automated (automated setup and self-monitoring, automated loading of powder, automated recycling and removal of powder, snap-in binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089-0.102 mm Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Special requirements for installation: None Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 480 h, workpiece length (max.): 3,715 mm, workpiece width (max.): 1,320 mm, workpiece height (max.): 180 mm, overall weight: 6,060 kg, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, The machine has 270 operating hours, almost like new; features laser positioning. Technical data: Brand: Busellato JET Master T 4 Technical specifications: - Machining area: 3715x1320 mm (X,Y) - Workpiece height: 180 mm - Motor power: 9.5 kW - Max spindle speed: 24,000 rpm - C axis: available - Drilling unit: 19 spindles - 1 sawing unit - 16-position plate tool magazine - 3-part safety mat - Automatic central lubrication Vacuum pump capacity (m3/h): 244/286 Payment in euros or forints, price is net. Machine new price: €125,675. Sale price: €47,500 +36-30-9198-716 Nsdpfxexawlbs Ag Islh

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet Nlsdpfx Ajxgua Asg Ish 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: used, Year of construction: 2017, operating hours: 24,500 h, total length: 2,250 mm, total height: 1,450 mm, total width: 1,250 mm, overall weight: 750 kg, input voltage: 400 V, input current: 30 A, HP Jet Fusion 3D 4200 – 2017 | Fully Maintained | Complete System HP Jet Fusion 3D 4200 industrial 3D printing system, manufactured in 2017. The machine has been fully maintained by HP. Last print was run on 17/07/26. Manufacturer: HP Model: Jet Fusion 3D 4200 Manufactured: 2017 Technology: HP Multi Jet Fusion (MJF) Condition: Used Maintenance: Fully maintained by HP Build volume: 380 × 284 × 380 mm Layer thickness: 80 microns Included: HP Processing Station Build Units: 2 × HP Jet Fusion 3D Build Units Printer can be viewed. Location: Available for inspection by appointment. System Includes HP Jet Fusion 3D 4200 Printer HP Processing Station with fast cool. 2 × Build Units Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. Nledpfx Agozx U Iks Ijh The HP service contract has EXPIRED. The buyer will need to arrange service and recertification on relocation. That cost is not included in our price.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, TECHNICAL DETAILS Production Speed Production speed, UV spot coating: max. 3,123 ISO-B2 sheets/hour Production speed, Evo 75: max. 4,200 ISO-B2 sheets/hour Production speed, Evo 75: max. 2,291 ISO-B1 sheets/hour Production speed, hot foil embossing: max. 2,300 B2 sheets/hour Format and Printing Area Paper width: min. 290 mm Paper width: max. 750 mm Paper height: min. 360 mm Paper height: max. 1,200 mm Sheet format: min. 420 mm × 297 mm Sheet format: max. 750 mm × 1,200 mm Nlodpezrfh Iofx Ag Ish Printable width: max. 540 mm or 730 mm Hot foil embossing area: max. 740 mm × 1,190 mm Resolution Resolution max.: 360 dpi Material Thicknesses and Basis Weights Material basis weight: min. 135 g/m² Material basis weight: max. 800 g/m² Material thickness before printing and lamination: min. 150 µm Material thickness before printing and lamination: max. 800 µm Material thickness for hot foil embossing: min. 150 µm Material thickness for hot foil embossing, standard version: max. 600 µm Material thickness for hot foil embossing, optional: max. 800 µm Foil Rolls Foil roll diameter: max. approx. 300 mm Foil roll length: 400–2,000 m Number of foil rolls that can be used simultaneously: max. 5 Foil roll width: min. 100 mm Standard core diameter: 1 inch MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,720 x 1,860 x 1,840 mm Weight: approx. 4,524 kg EQUIPMENT iFOIL-L module for hot foil finishing Evo-75 version for sheet formats up to 750 mm × 1,200 mm Holder for up to five foil rolls on one shaft Quick-change core for 1-inch foil rolls

Condition: ready for operation (used), Year of construction: 2018, travel distance Z-axis: 305 mm, total height: 2,692 mm, overall weight: 2,041 kg, number of axes: 3, This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine. Nlsdsya Ecispfx Ag Ioh • Work envelope / cutting table: • Cutting X-axis travel: 10’ 0’’ (3,061 mm) • Cutting Y-axis travel: 6’ 7’’ (2,019 mm) • X-axis table size: 12’ 2’’ (3,708 mm) • Y-axis table size: 7’ 0’’ (2,134 mm) • Material support slats: 4’’ × 14 ga galvanized steel (102 mm × 2 mm) • Performance: • Traverse speed: 500 in/min (12,700 mm/min) • Repeatability: ±0.001’’ (±0.025 mm) • Accuracy: ±0.003’’ (±0.076 mm) • Pump & cutting head: • Pump power: 30 HP • Cutting head: MAXJET 5i with A-Jet (5-axis cutting) • Nozzle life: Diamond orifice, approx. 500 hours (guaranteed) • Dimensions & weight: • Operating weight: 20,500 lb (9,299 kg) • Overall height: 8’ 10’’ (2,692 mm) • Footprint (without controller): 14’ 1’’ × 14’ 1’’ (4,293 × 4,293 mm) • Slat bed: • Standard configuration: 34 slats • Maximum slat configuration (optional): 117 slats • Maximum material load: 300 lb/ft² (1,465 kg/m²) • Standard features: • Intelli-TRAX abrasive-jet linear drive system (1 micron resolution) • Brushless servo motors and drives • Abrasive feed system (15 lb capacity) • Rugged catcher tank (300 lb/ft² load capacity) • Industrial steel protection covers on X-axis • Modular bridge control and power centers • Low-noise pump and system design • Windows-based control system • IntelliMAX Standard Software (2 seats) • Mobile control station with widescreen display • No special foundation required • Ergonomic full table access • Made in the USA

Year of construction: 2005, condition: ready for operation (used), Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible. Njdpfx Ajyypmgog Ijlh

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Njdpfeygmhtox Ag Islh

Condition: like new (used), For sale is a like-new JET cylindrical grinding machine, model JWDS 1632, with a maximum grinding width of 406 mm / 812 mm in 2 passes. The machine is in like-new condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical specifications: - Power: 230 V / 1.1 kW / 1.5 HP Nedpfozgrz Rex Ag Ielh - Drum speed: 1,450 rpm - Grinding speed: 9.5 m/s - Feed rate: 0 - 3 m/min - Maximum grinding width: 406 mm / 812 mm in 2 passes - Minimum grinding length: 60 mm - Grinding thickness: max / min 75 / 0.8 mm - Dust extraction connection: 100 mm - Dimensions (L x W x H): 1,010 x 510 x 1,270 mm - Weight: 71 kg The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: grinder, grinding machine, grinding Reference: R-R05Y9

Condition: used, Objet Stratasys   Type: Objet Connex500/h5>   Objet Stratasys 3D Printer   The Objet Connex 500 is Objet’s groundbreaking multi-material 3D printer. With a large build size of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes, allowing them to simulate the intended end product more accurately than with any other technology.   What makes the Objet Connex unique?   With Objet’s patented simultaneous multi-material jetting technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products.   Freedom to choose your own materials   The Objet Connex500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. With it, users can simulate a variety of mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS-grade engineering plastics.   Excellent Productivity   The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue together separate model elements • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - enables printing of large parts in a single build or many small parts on a single tray • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of continuous capacity • High speed - simultaneous printing of multiple items from different materials; models cure while printing; models can be processed immediately after printing • Easily removable support material for complex geometries Nlodjzdnpljpfx Ag Ish • Office comfort - quiet system with fully sealed REACH-compliant cartridges that are easy to load and unload   Year of manufacture 2010   According to the last operator, it is functional. No functional test has been carried out by our company.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, information provided are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Stratasys Objet   Model: Objet260 Connex 2   Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825   The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, thus allowing the production of prototypes made of three materials, as well as simulating overmolding or equipping build plates with selected models.   Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces and thin walls.   Model materials:   Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525)   Digital Materials:   Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance   Applications: Visual prototypes Functional prototypes Tools and fixtures Architectural models Medical models Injection molding molds Concept models   Technical specifications:   Build volume: 255 × 252 × 200 mm   Layer thickness: Horizontal layers of only 16 µm Nljdpfjzh Dqyex Ag Ieh   Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi   Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the complete model size (only for rigid materials, depending on geometry, design parameters and model orientation)   Size and weight: 870 × 735 × 1200 mm; 410 kg   AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm Nodpfxezf N Nij Ag Ijlh 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: excellent (used), Year of construction: 2017, Stratasys 3D Printer PolyJet J750 With the Stratasys J750 3D printer, you can optimize and streamline the process of manufacturing models using various materials on a single build platform within the same print job. During the design phase, you can assign colors to different components of a model. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package until June 2026, including spare parts, is included. The Stratasys J750 3D printer offers a build volume of 490 mm x 390 mm x 200 mm (19.3 x 15.35 x 7.8 in). AC Power Connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 220–240 VAC, 50–60 Hz, 7 A, single-phase Technical Details Overall length: 1,400 mm Overall height: 1,100 mm Overall width: Nsdpfxoyly Auo Ag Ijlh 1,260 mm Input current type: Alternating current (AC) Total weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min): 18 °C Ambient temperature (max): 25 °C Applications - Rapid prototyping - Concept models - Medical models - Tooling and fixtures - Coloured textures

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) Nledpfx Ajxgumceg Ioh – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: like new (used), Year of construction: 2025, For sale is a used JET panel saw JTS-600XL with a maximum cutting length of 1600 mm. The machine was only briefly used for demonstration purposes in our showroom and is therefore in as-new condition. Technical data: - Motor: 230 V / 1.5 kW / 2 HP - Saw blade speed: 4000 rpm - Saw blade diameter / bore: 250 / 30 mm - Saw blade tilt: 0° – 45° - Max. cutting depth at 0°: 80 mm - Max. cutting depth at 45°: 54 mm - Max. cutting width at rip fence: 610 mm - Table dimensions: 800 x 350 mm - Table extension: 415 x 350 mm - Table widening (right): 800 x 270 mm - Precision sliding table: 1600 x 255 mm - Max. cutting length: 1600 mm Nljdpfx Ajy Nm H Aeg Ish - Machine dimensions: 1650 x 2200 x 1100 mm - Weight: 157 kg Scope of delivery: - Sliding table 1600 x 255 mm - Circular saw blade Ø 254 x 30 x 3 mm - 36 TCT teeth - Parallel fence - Support table 460 x 600 mm with extendable crosscut fence 2200 mm - Extraction port Ø 100 mm The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618

Condition: new, Year of construction: 2025, functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, product height (max.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter is designed for the most demanding customers. Thanks to the latest technologies and a rigid frame design, the machine guarantees excellent cutting quality, high precision, and long-term durability. 🔹 Key Features: Working area (3-axis): 2000 x 4000 mm X/Y traverse speed: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Sealed linear motion units + servo drives Centralized electronic lubrication system Advanced CNC control + IGEMS CAD/CAM 2D/3D Optional 💥 5X Cutting Head: Taper angle compensation and bevel cutting up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond nozzle Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent Systems: 12 MP camera Automatic tool angle adjustment system Precision 5x cut calibration system 💦 High-pressure Pump: Max. working pressure: 4150 bar (60,000 psi) Constant pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control ⚙️ Additional Equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Efficient sludge extractor – 170 l/min 📍 Made in Poland – local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare a tailored offer. Nlodpjv Tmxusfx Ag Ish Custom machine dimensions and any configuration available on request. *(Images are for reference only; the offer refers to a 1.5x3m, 3-axis machine.)

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET belt and disc sander JSG-31A with a 300 mm disc diameter. The demonstration unit is in original condition, so you receive the full warranty. Technical specifications: - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Belt sanding table size: 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° to 90° - Extraction port: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Nljdoycc Tdjpfx Ag Ioh Shipping (by freight forwarder): Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: SG1CH1S001, number of ink cartridges: 9, color channels: 7, number of print heads: 8, resolution (max.): 1,200 dpi, total length: 3,640 mm, total width: 4,210 mm, total height: 1,750 mm, counter reading (color): 124,000, year of last overhaul: 2025, type of input current: three-phase, input current: 32 A, input voltage: 380 V, Equipment: raster image processor, HP Latex R1000 Hybrid Printer We are offering for sale an HP Latex R1000 hybrid printer, which combines revolutionary latex print quality with the ability to print on both rigid and flexible media. The machine is in very good technical condition, has been regularly maintained, and is ready for immediate operation. Key Specifications: Manufactured: December 2021 Print Counter: 124,000 sqm Technology: HP Latex (featuring the whitest white ink on the market that does not yellow) Configuration: Hybrid solution (rigid boards and roll-to-roll) Condition: Very good, fully functional, operated in a clean environment Main Advantages: Versatility: Prints on everything from PVC sheets, dibond, and acrylic to self-adhesive vinyls, banners, textiles, and corrugated cardboard. Quality & Eco-friendliness: Water-based latex inks are odorless, certified for indoor applications (schools, hospitals, children's toys), and highly scratch-resistant with photorealistic print quality. Service History: Maintained under full service by the official distributor (HSW) throughout its operation. Package Includes: HP Latex R1000 printer Roll-to-roll printing accessories, rigid board loading/unload tables, and RIP software The machine has been out of active production since March 2025, but it is maintained in an operational state with regular startups and cleaning. Nedpfx Agoz Nc Sce Islh

Condition: used, Year of construction: 2020, Digital UV Coating and Finishing System MGI JETvarnish 3D Evo 75 Maximum sheet size: 1,200 × 750 mm Processable material: 135–800 g/m² Coating unit: 135–400 g/m² Suitable for coated and uncoated papers and cardboard, pre-coated as well as laminated/cashed substrates, and suitable plastic media. Coating: Varnish High-Gloss clear coat 18-liter tank Coating layer thickness: 7–232 µm Nedpezqyrrsfx Ag Islh Digital UV coating finishing, partial and full-area coating, as well as 3D/relief coating effects. Machine is operational and available for immediate delivery. Location: Western Europe Price on request.