Used Holzfraese Axolox 2513 for sale (54)

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. Rjdsxc Rmqspfx Amyocd All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Rcjdpfxjzk Npgo Amyed Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: good (used), Year of construction: 2018, working length X 1.600 mm working length Y 800 mm working depth Z 190 mm Rjdpjyku Uvofx Amyscd Motor output 2,2 kW Weight ca. 450 kg Year 2018

Condition: new, Year of construction: 2023, Vaccum Mobile User video: Consisting of a movable table with 4 vaccum pads, a hand pad, extendable shelf for hand tools Rodpfx Aonvkhlomyscd Makita vacuum pump incl. charger, battery and hydraulic oil The Vac Up Mobil offers storage space for a vacuum cleaner and is height-adjustable up to 80 mm Lifting capacity approx. 70 kg L x W x H 705 x 670 x 950 mm Weight approx. 40 kg Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Print bed: 2,500 × 1,300 mm High print speed: up to 25 m²/h or 8 sheets/h in the 2,440 × 1,220 mm format at 4C up to approx. 12.5 m²/h for 4C+W with simultaneous white printing New ink supply system: The 1-litre ink bottles can be conveniently replaced from the front – making refilling particularly quick and easy. Simple operation without alignment issues: Stop and registration pins, as well as a printed measuring scale, enable the exact positioning of the media on the print table. The pins prevent the media from slipping. The measurement scale makes it easy to adjust layout and RIP data to the correct position. High flexibility thanks to direct printing on a wide variety of media, including thick substrates and plates up to 50 mm thick. The Mimaki Advance Pass System reduces unsightly banding and improves the print quality. The special Mimaki recirculation system prevents the white ink from settling. Mimaki Clear Control (MCC): To prevent dust adhesion and small air bubbles, curing time and UV radiation are adjusted. This produces both glossy and stylish matt finishes. Furthermore, by applying multiple layers of clear varnish, the print can be embossed to create three-dimensional effects. Convenient ink selection: LH-100: hard UV ink for smooth surfaces with high scratch resistance, colour brilliance and solvent resistance LUS-150: flexible UV ink for smooth and uneven surfaces, deformable up to approx. 150 per cent and suitable for numerous substrates White ink for image undercoating reduces light bleed-through Two-layer printing with white on clear and coloured surfaces Finishing with a gloss or matt varnish Environmentally conscious printing: UV printing technology does not release any harmful substances. UV-LED lamps ensure low power consumption and a long service life. RasterLink 6: Powerful RIP for outstanding colour reproduction Different print jobs can be nested without any problems Simple and user-friendly operation Self-explanatory icons make it easy to get started Related RIP settings are clearly arranged in a single window Settings can be saved as favourites for repeated use Direct monitoring of the printing process in the main window Software and profiles can be updated via the internet Technical specifications: Printing method: Piezo inkjet Print heads: 2 heads in a staggered arrangement Max. print format (W × L): 2,500 × 1,300 mm Max. material format (W × L): 2,500 × 1,300 mm Max. material thickness: 50 mm Rjdpfxezlbtaj Amyecd Max. material weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900 and 1,200 dpi Media feed: Vacuum Vacuum zones: 2 sub-zones along the X-axis Accuracy: absolute ±0.3 mm or ±0.3% of the specified distance, whichever is greater applies Repeatability: ±0.2 mm or ±0.1% of the specified distance, whichever is greater applies Drying: UV-LED technology Service life of UV LED lamps: Reference value over 5,000 hours, not guaranteed Interface: USB 2.0 Power consumption: up to 2.88 kW Power supply: 200–240 V, 50/60 Hz, single-phase, up to 12 A Dimensions (W × D × H): 4,400 × 2,250 × 1,250 mm Weight: 650 kg Availability: at short notice Storage location: Röllbach

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. Rcedpfx Amewdny Tsyod - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Rcedpfx Aexgpaqsmysd Weight: approx. 3200 kg

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Rcedpszgc T Dsfx Amyed Please refer to the attached expert report for details on the condition of the item.

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Rodpfsy Egkgjx Amyocd Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg Rcodpfxoy Aplzo Amyod To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x1650x2150 mm Weight 6500 kg Total power requirement 52 kw Rcsdjv A Hi Sopfx Amyed

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8500x1800x2150 mm Weight 6000 kg Rcjdpfx Amsv A Hkcsyod Total power requirement 10 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2960x1500x2000 mm Weight 4000 kg Total power requirement 19,5 kw Rodjv A Hkiopfx Amyscd

Condition: new, Dimensions (L/W/H) 2200x3300x2100 mm Weight 3000 kg Rcjdpfx Amsv A Hbzoysd Total power requirement 18 kw

Condition: new, prebending: 10,0sheet length: 2550sheet thickness: 13,0total power requirements: 15,0weight approx.: 10,6messurements (LxWxH): 4,76x1,66x1,59 Rcoded Ab H Ispfx Amysd

Condition: repair required (used), Year of construction: 2017, operating hours: 15,939 h, functionality: limited functionality, machine/vehicle number: R678B751, number of ink cartridges: 8, color channels: CMYK, number of print heads: 2, I am offering for sale a flatbed plotter Mimaki JFX200-2513. Working area: 1300x2500 mm 2 print heads Currently, the machine is loaded with 2xCMYK; conversion to CMYK+W+C is possible. Rcedpfxsxzpvze Amysd Low usage: 4916 m2 The machine has mechanically damaged print heads. Printing is possible, but banding starts to appear relatively quickly.

Condition: new, empty load weight: 625 kg, maximum load weight: 675 kg, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, loading space volume: 6.7 m³, color: silver, construction height: 2,480 mm, working width: 1,920 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, with DOORS, refrigeration unit = Arktik 1600 N, sandwich walls, * IMMEDIATELY AVAILABLE * with DOORS, refrigeration unit = Arktik 1600 N, sandwich walls Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1,300 kg - Unladen weight: 625 kg - Payload: 675 kg - Interior dimensions: 250 x 135 x 190 cm (L x W x H) - Overall exterior dimensions: 391 x 192 x 248 cm (LxWxH) - Loading sill height: 55 cm - Tyres: 185/65 R14 steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Walls: Thermo sandwich body 40mm - Roof material: Thermo sandwich body 40mm - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional retrofitting in lashing rail - Rear door: yes - Tailgate: no - Tailgate material: Thermo sandwich 40mm - Tailgate/door function: Refrigerated compartment press lever lock - Clearance dimension rear door/flap: - - Interior light: 230V interior light - Supports: yes 4 pieces - Overrun device & brake: yes, Alko - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Overrun device from ALKO - Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door retainer - Rear frame and frame profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - 1800 watt cooling capacity at a cold room temperature of +6 C and an ambient temperature of 30 C - Temperature control range from +2 C to +10 C - Evaporator air volume flow 750 m2 - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing light - Large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - 100km/H approval with wheel shock absorber - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rcjdpfx Amou Hruxeyod

Condition: ready for operation (used), functionality: fully functional, operating hours: 30,604 h, laser hours: 21,552 h, laser power: 2,000 W, sheet thickness steel (max.): 16 mm, sheet thickness aluminum (max.): 5 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 250 mm, No reserve price – guaranteed sale to the highest bidder! Regular maintenance: Fully serviced by LVD every 6–12 months TECHNICAL DETAILS Control: Fanuc 160i L Sheet size: 2,500 mm x 1,250 mm Travel paths: 2,600 x 1,300 x 250 mm Laser Laser power: 2 kW / 2000 watts Laser model: GE-Fanuc RF CO2 Laser Maximum cutting thickness (steel): 16 mm Maximum cutting thickness (stainless steel): 6 mm Maximum cutting thickness (aluminium): 5 mm Optics & focusing Quick-change lenses: 5” and 7.5” Focusing head: manual MACHINE DETAILS Parts counter: 193,870 Power-on hours: 77,278 h Operating hours: 2,320 h Cutting hours: 21,552 h Laser power-on hours: 30,605 h Machine dimensions: 4,610 x 4,970 x 2,200 mm Weight: 11 t Rcjdpfx Asxv Skwemyod EQUIPMENT - Pneumatic ball support system - Capacitive height sensing system - Laser eye system for precision - High-pressure Clean-Cut function - Scrap/small parts compartment - Extraction system - Chiller unit - Operating manual

Condition: new, maximum load weight: 1,078 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 300 mm, total length: 3,765 mm, total width: 1,310 mm, total height: 830 mm, Year of construction: 2026, Humbaur Startrailer with cover and supports, LH1500 Price - 2450 EUR including 19% VAT, cover and supports, including 6.4% delivery fee and vehicle documents. Technical specifications: * Trailer type - Single-axle * Construction type - Aluminum * Weight - 231 kg * Gross vehicle weight - 1,300 kg * Payload - 1,078 kg * Internal length - 2,510 mm * Overall length - 3,765 mm * Internal width - 1,310 mm * Overall width - 1,800 mm * Internal height - 300 mm, including cover 1600 mm * Overall height - 830 mm, including cover 2150 mm * Loading height - 530 mm * Tires - 14 inches Rjdpfx Aozphqmemyscd Standard equipment: 13-pole plug * Side walls made of anodized, double-walled aluminum profile * Fixed front wall and flap with sturdy fasteners * Tie-down eyes integrated into the side walls, tensile force 400 kg per tie-down eye, Dekra tested * Multifunction lighting integrated into the underrun protection * Corner posts with insertion options * Pre-assembled fastening buttons for cover attachment on the side walls Description: Do you need to transport garden waste, small bulky items, or large purchases? Then the low-loader Startrailer will inspire you. It is particularly lightweight, versatile, and looks good. Note, for example, the attractively designed, discreet fasteners of the rear flap.

Condition: new, empty load weight: 231 kg, maximum load weight: 1,069 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 1,800 mm, total length: 3,765 mm, total width: 1,800 mm, total height: 2,330 mm, tire size: 14, trailer brake: trailer braked, Year of construction: 2026, Humbaur Startrailer with cover and supports LH1500 Price – €2,450 including 19% VAT, cover and supports, including a 6.4% delivery fee and vehicle documents. Description: Do you need to transport garden waste, smaller bulky items, or larger purchases? Then the low-loader Startrailer will impress you. It is particularly lightweight, versatile, and looks good. Note, for example, the attractively designed, discreet fasteners on the tailgate. Technical data: Trailer type – single-axle Construction type – aluminum Weight – 231 kg Total weight – 1,300 kg Rcodpfxszphkao Amyed Payload – 1,078 kg Internal length – 2,510 mm Overall length – 3,765 mm Internal width – 1,310 mm Overall width – 1,800 mm Internal height – 300 mm, including cover 1,800 mm Overall height – 830 mm, including cover 2,330 mm Loading height – 530 mm Tires – 14 inches Standard equipment: 13-pin connector Side walls made of anodized, double-walled aluminum profile Fixed front panel and flap with sturdy fasteners Tie-down loops integrated into the side walls, tensile force 400 kg per tie-down loop, Dekra tested Multi-function lighting integrated into the underride guard Corner posts with insertion options Pre-assembled mounting buttons for cover attachment on the side walls.

Condition: ready for operation (used), Siemens 1FT5074-1AC71-1EG0 AC drive motor, serial number EH782513002014, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Rcsdpfx Aji D Sywemyed

Condition: ready for operation (used), Siemens 1FT5074-1AC71-1EG0 AC servo motor, serial number: EH782513002017 + Heidenhain ROD 425 2500 27S12-03 rotary encoder. 376 846-LT, serial number: 635767071B, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately! Rsdpfx Aji D Syzemyecd

Condition: used, machine/vehicle number: 007468, X axis working area: 3200 mm Y axis working area: 1300 mm Main Electrospindle power: 11 KW Rcsdswuz Tujpfx Amyed Number of controlled axes: 3 axes Total number of drilling spindles: 36 Total number of tool changer positions: 10

Condition: good (used), PLC expansion module, switchgear, control system, marshalling module, circuit board module -Manufacturer: Phoenix Contact, PHG patch panel -Type: UMK-SE 11.25-1 ID number: 3522449 -Number: 2 modules available -Price: per piece -Dimensions: 115/75/H40 mm -Weight: 0.1 kg/pc. Rodpfx Asmnud Ssmyocd

Condition: excellent (used), Indexable milling cutter (28233) Type Gigacut AW 125-13-8 Diameter 125 mm Arbor hole 40 mm Rcjdjhzt E Topfx Amysd Weight 2.5 kg