Used Holz-Her Etz for sale (6,559)

Condition: used, used, in top condition with new feed rollers cleaned, function-tested, trial run Brand: Holzher Type: ETZ Machine no.: 24098 Motor with pole switching, 2 speeds 2 / 0.75 kW Roller diameter 110 mm Roller width 50 mm Feed rollers: 3 pieces Redsy Dh R Eopfx Amyocd Speeds: 8 steps, 2-30 m/min. Space requirement approx. 1300 x 500 x 800 mm Storage location: 97447 Gerolzhofen, loaded free of charge, unpacked Transfer in as-is condition, as inspected and function-tested, without overhaul, without warranty or liability

Condition: used, used, in good condition Rsdeyvvtfjpfx Amyscd overhauled, with 4 new feed rollers Make: Holz-Her Model: ETZ Machine no.: 47884 Pole-changing motor with 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 4 pieces with stand Speeds: 2-30 m/min., 4-speed selectable Space requirement approx. 1200x600x700 mm Weight approx. 60 kg Total connected load: 0.75 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Handed over in current condition, as inspected, functionally tested, without warranty or guarantee

Condition: used, Used, good condition, low hours Manufacturer: Holz-Her Model: ETZ117 Machine No.: 6999 Motor: pole-changing, 2 speeds Roller diameter: 110 mm Rcedpfx Amjyu U Ecjyjd Roller width: 50 mm Feed rollers: 3 pieces with stand 8 speeds, 4-position switchable Weight approx. 60 kg Location: 97447 Gerolzhofen, loaded free, unpacked Sold as is, as inspected, function tested, no overhaul, no guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 417/1-505, functionality: fully functional, operating hours: 29,856 h, cutting height (max.): 80 mm, cutting width (max.): 3,100 mm, saw blade diameter: 350 mm, cutting length (max.): 4,200 mm, Equipment: scorer, The machine is still in operation and will be available starting October 9, 2026! TECHNICAL DETAILS Cutting length: 4,200 mm Cutting width (program slider travel): 3,100 mm Cutting height: 80 mm Saw blade overhang: 85 mm Min. clamping width: 0 mm Max. clamping width: 1,300 mm Saw units Main saw motor: 11 kW Main saw blade diameter: 350 mm Scoring saw motor: 1.5 kW Scoring saw blade diameter: 180 mm Motorized groove cutting device: 0–35 mm MACHINE DETAILS Software: Opti-Cut Display: 17″ TFT Control system: Opti-Cut Electrical data Operating voltage: 400 V (+10 % / -5 %) Mains frequency: 50 Hz Electrical connection rating: 20 kW Total weight: 6,200 kg Operating hours: 29,856 h EQUIPMENT Angle stop on the left 7 roller rails 8 clamping devices Clamping device opening: 82 mm First clamping device with double finger 4 air cushion tables 1 central blower Labeling package including label printer Opti-Cut software installed Rcjdpfx Aeznbkkjmysd Printing and clamping system Cutting height automation Pressure beam height control Angle and backstop device

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Rcedpfx Aovvkfdemyjd

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Rjdovvi Nbepfx Amyecd

Condition: used, Storage location: Nattheim Redpfx Aovvkrdjmyocd

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Rjdpfxovvi Spj Amyjcd

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm with tool change) Rcjdpezdzlmofx Amyed 18.5" touchscreen control, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed guide rail 1350 mm MOT Edge magazine, fully automatic for coil and strip material MOT Glue application station GLU-JET cartridges - hot melt and PU gluing, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle High-gloss package Pressing unit 1913 mot., motorized-pneumatic NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness with electro-pneumatic adjustment of 0-10° bevel of the cutting saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius milling Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end edges, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as antistatic agent at the pressing unit Infeed area: electronically controlled release agent spray device Pressing unit: electronically controlled antistatic spray device Outfeed area: electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is WORKSHOP OVERHAULED in TOP CONDITION Available from stock, Lieboch

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00 Rcodpfx Aszp Hc Usmyjd

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Rcjdpfjzpzy Uex Amysd Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format Rcodjzpzy Ijpfx Amysd - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Pressure unit pneumatically controlled Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness Rjdpfx Aoznuncemyscd with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return available from stock in Lieboch

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine Rcedpfx Amjznucyoyjd fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: used, Year of construction: 2005, functionality: fully functional, HOLZ-HER 6110 CUT 70 Panel Saw A HOLZ-HER 6110 CUT 70 panel saw is for sale, designed for precise cutting of chipboard, MDF, and other panel materials. The machine is located in Labin (Istria, Croatia). Price: 25,000.00 EUR Service and Condition The machine is regularly serviced. A new computer and a new label printer were installed a few months ago. It is ready for immediate use. The CUT 70 model is designed for fast and precise cutting of panel materials and enables reliable and efficient production in carpentry workshops and industry. If you are interested in purchasing the entire production facility, please contact us. We will be happy to discuss a serious offer. Rsdpfxozp U Ras Amyecd The following are also available in the facility: HOLZ-HER Eco Master 7120 CNC machining center HOLZ-HER Sprint 1321-2 STUF edge bander Lazzari UNO 3000i circular saw Polymac curved edge bander Polymac ABS edge trimming machine Busellato jointer Table router for making grooves Overhead router Contact: Damir Verbanac 📞 +385 91 22 55 349 Also available via WhatsApp or Viber.

Condition: used, Year of construction: 2004, functionality: fully functional, For sale is a HOLZ-HER Eco Master 7120 CNC machining center, suitable for the precise processing of panel materials in the production of furniture and other carpentry products. The machine is located in Labin (Istria, Croatia). Price: 20,000.00 EUR Service and condition: The CNC machine is regularly serviced. The main motors have been replaced. New ceramic bearings have been installed. The machine is part of a production facility for the manufacture of panel furniture and is ready for continued use. If you are interested in purchasing the entire production facility, please contact us. We will be happy to discuss a serious offer. The facility also includes: HOLZ-HER Sprint 1321-2 STUF edge banding machine HOLZ-HER 6110 CUT 70 panel sizing saw Lazzari UNO 3000i circular saw Rodpfxjzp U H Ij Amyscd Polymac curved edge banding machine Polymac machine for processing ABS edge banding Busellato drilling machine Table router for creating grooves Overhead router Contact: Damir Verbanac 📞 +385 91 22 55 349 Also available via WhatsApp or Viber.

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Location: Supplier. Redpfxjy Tpz Ro Amyscd

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Weight 900 kg Redpfx Ajzmy N Njmyjcd

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Rodoygm Tiopfx Amyocd Cutting height 1.800 mm machine weight ab. ca. 600 kg kg

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Rjdoy Dd Iyopfx Amyjcd Edge banding thickness: 0.4 - 3 mm Edge banding height max.: 51 mm Edge banding strip length min.: 350 mm Edge banding overhang in height per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Overall length: 3700 mm Width: 1440 mm Height max.: 1970 mm Workpiece infeed height: 850 mm Weight: approx. 850 kg Storage location: Nattheim

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510 Redszbxznspfx Amyecd

Condition: used, Edgebander Holzher Sprint 1317 pre-milling units glue application, glue cartridge pneumatic pre-cut guillotine pressure rollers trimming saws top-bottom milling units corner rounding Rodpox Tf D Uofx Amyecd profile scraper flat scraper Max. edging height (mm): 50 Edge thickness from roll: 3 mm Feed speed: 10 m/min The machine requires servicing, adjustment, and calibration. It can be started and all units power on, but the front saw does not react to material and the corner rounding unit requires adjustment.

Condition: used, Year of construction: 2016, machine/vehicle number: 7405_408, functionality: fully functional, operating hours: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center for Sale For sale is a well-maintained HOLZ-HER Evolution 7405 White Edition, manufactured in 2016. The machine is in very good technical and optical condition and can be demonstrated while powered on. The exceptionally low processing hours of only 788 hours with active feed are particularly noteworthy. In 2021, the machine was professionally serviced and completely realigned by the manufacturer. Since then, it has been used only sparingly and, as a result, runs smoothly, precisely, and reliably. Technical Data Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of Manufacture: 2016 Machine Number: 7405_408 Software / Control CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Active Feed / Processing Hours: only 788 h Machine ON: 6,723 h Equipment 4-MAT Version Drilling unit with 15 spindles Sawing and grooving unit Milling unit with 6-position tool changer Handheld control unit Vertical and horizontal machining Vacuum clamping system Ideally suited for: Furniture manufacturing Interior design Kitchen manufacturing Carpentry shops CNC entry-level or capacity expansion Condition Very well-maintained overall condition Regularly serviced Rcsdpfxjy Sicxe Amyod Professionally realigned by the manufacturer in 2021 Only slight use since then Immediately ready for use Runs very smoothly and precisely No known technical defects The machine can be inspected and tested while in operation. Availability Available from week 25/2026. Inspection possible by appointment. Assistance with loading and transport organization is possible. Price Negotiable: €40,000 net

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Equipment: - table - pre-milling - belt feeder - 2 glue tanks: for granules and cartridges - currently, the machine uses hot melt adhesive (granules) - guillotine – for pre-cutting veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge shaping (radius cutters) - corner rounding unit - sanding units – for removing excess glue - polishing units - stepless feed rate adjustment 8-18mm - workpiece thickness 6-45mm - minimum workpiece length 180mm - minimum workpiece width 600mm - maximum veneer thickness fed from a roll 3mm - air consumption 6-8 bar - dust extraction nozzle diameter 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES – Made in Germany – Spray system – Pre-milling and corner rounding – 2 glue tanks – Includes 4 additional milling cutters – Unpainted – Original technical documentation and CE marking Rsdszlpv Nopfx Amyscd – Very good condition – Used veneer edging machine Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 2002, total length: 5,050 mm, total width: 2,420 mm, total height: 800 mm, Colour: Grey Weight: 750 kg Rcsdpfx Amjzcng Noysd - Details: - └ Description: Digital readout does not function. - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 221 / 0-206 - Max. cutting height vertical [mm]: 1950 - Max. cutting height horizontal [mm]: 1900 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 50 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 5050mm x 2420mm x 800mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels