Used Hoku Bk119-270-10-Vkk for sale (31,699)

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Lodpfxjyw Thvs Apmshk Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Location: Rieth

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Universal piston compressors with belt drive and high-quality features. Lhsdpfor Ig Ahex Apmjk Pressure vessel manufactured according to German AD 2000 regulations. Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 10024031, overall weight: 197 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,970 mm, power: 4.8 kW (6.53 HP), Equipment: refrigerant dryer, type plate available, Stationary piston compressor with refrigeration dryer, fine filter, condensate treatment unit for oil-water separation, and automatic condensate drain, 270 l tank, robust design and top quality, fully automatic on/off operation. Lhodpfx Apozin Skomjk Equipped with all safety devices, completely ready for connection. From 7.5 kW upwards, standard equipment includes an automatic star-delta switch. Fifteen-year guarantee against rust penetration on the internally and externally hot-dip galvanized compressed air tank. Air outlet tank 3/4", air outlet refrigeration dryer 3/8", filling capacity approx. 520 l/min, automatic condensate drain AMD on the tank, automatic condensate drain in the refrigeration dryer, article number 2024712KK, recommended retail price: €4,049.00

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Tank volume: 90 l Cylinder/stages: 2/1 Lhjdpjhk Dfkjfx Apmsk Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Year of construction: 2022, condition: used, Second-hand machine Year of manufacture: 2022 Condition: as new, very few operating hours, not used in production Lhjdpfx Apezk Nrzsmsk Features and technical specifications: - Compact screw compressor with variable speed control and innovative LOGIN control system - With tank and refrigerated dryer - Maximum pressure: 10 bar - Effective delivery rate: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2 - Tank capacity: 270 litres (AD2000) - Frequency-controlled - Electronic control - Oil heat exchanger - Compressed air receiver, hot-dip galvanised inside and out - Drive transmission: Direct coupling - Starting method: Star-delta - Compliant with AD 2000: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: at short notice Storage location: Röllbach

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 with refrigerated dryer Features and Technical Specifications: - Pressure: 10 bar - Suction capacity: 660 l/min - Speed: 1025 rpm - Tank volume: 270 l - Noise level: 78 dB(A) - Effective flow rate: 520 l/min - Air outlet: 3/4"i - Drive power: 4 kW - Air intake capacity: 660 (l/min) - Drive type: V-belt - Tank design: vertical - Power (kW): 4.0 - Voltage (V): 400 V - Starting method: Direct-on-line (DOL) - Compression type: 2-stage - Dimensions: 750x705x1800 mm - Weight: 170 kg With DK 985 Eco refrigeration dryer: - Airflow at pressure dew point 3 °C: 600 l/min Lhsdpfszk Nqksx Apmjk - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - With automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Availability: available shortly Storage location: DE-63934 Röllbach

Year of construction: 2023, condition: used, New demonstration machine!!! List price €2,986 net! Technical data: Pressure: 10 bar; Suction capacity: 650 l/min; Effective delivery rate: 520 l/min; Drive power: 4.0 kW; Speed: 1025 rpm; Tank volume: 2 x 90 l; Weight: 175 kg; Noise: 83 dB(A); Air outlet: 1/2"; Dimensions (W x D x H): 1200 x 800 x 1240 mm. Design: V-belt-driven piston compressor mounted on two horizontal pressure tanks, fully assembled on a safety tray, including piping. Complete equipment: The ready-to-connect equipment includes: - Pressure switch for fully automatic operation - Start-up relief and motor protection - Safety valve - Check valve - Manometer. V-belt-driven compressor unit: The belt drive provides a clear arrangement of all components. All elements requiring maintenance can be easily disassembled or assembled. Ljdpfevxxvisx Apmshk Location: Rieth

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, filling capacity at 6 bar approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, motor 400 volts, 50 Hz, 4 kW Lodpfjwgcb Dsx Apmjhk with Condor pressure switch and pressure gauge, incl. pre-filter, refrigeration dryer (230 volts), automatic boiler drainer (230 V), and oil/water separator, bolted on a safety pallet with rubber vibration mounts, available for immediate delivery from our Seevetal location, excluding transport, subject to prior sale.

Year of construction: 2018, condition: like new (used), OTEC Special Purpose Machine SF 170/270/1000 for Camshaft Bearings For sale is an OTEC special purpose machine for the machining and surface finishing of camshaft bearings. The system is suitable for machining both short and long camshaft bearings and has been designed for industrial series applications. Technical data: Manufacturer: OTEC Machine type: SF 170/270/1000 Application: Machining and surface finishing of camshaft bearings Machine dimensions: • Length: approx. 2,586 mm • Width: approx. 798 mm • Height: approx. 1,785 mm • Loading height: approx. 920 mm Weight: • Machine weight: approx. 1,200 kg • Transport weight: approx. 1,400 kg Electrical connection data: • Voltage: 3 x 400 V • Frequency: 50/60 Hz • Fuse rating: 32 A • Connected load: 12.5 kVA • Max. power consumption: 10 kW Compressed air connection: • Operating pressure: 6 bar • Connection: DN 7.2 (R 1/4”) Water connections: • Inlet: 3/4” (Ø 16 mm) Lhedpfx Apozb Abxomsk • Outlet: 1 1/4” (Ø 31 mm) Workpiece dimensions: Long camshaft bearing: • Length: approx. 177.5 mm • Inner diameter: approx. 89 mm Short camshaft bearing: • Length: approx. 89 mm • Inner diameter: approx. 89 mm Special features: • Robust industrial design • Compact footprint • Automated machining process • Suitable for series production • Integrated media connections for compressed air and water Location: Germany Inspection possible by appointment.

Condition: used, functionality: fully functional, machine/vehicle number: 22129, fuel type: gas, Year of construction: 2013, operating pressure: 10 bar, Used steam boiler system with gas burner and economizer Boiler manufacturer: VKK Standard Kessel Lhjdpfx Ajzk H Aqjpmsk Type: 22129, 10 bar Year of construction: 2013 Steam capacity: 12,000 kg/hour Permissible working pressure: 10 bar CE 0045 Complete with fittings, Weishaupt burner G70/2A ZM-1LN, control panel with Siemens PLC, and economizer. Also includes 2 feed water pumps and various fittings, including an automatic blowdown valve based on conductivity, a manually operated bottom blowdown valve, and a sample cooler.

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Ljdpev T Tncefx Apmshk Type: WT11-270/70/10 Section No.: 58226018400020 Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Water-cooled temperature chamber Compressed air dryer type: ZANDER Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Refrigerant: R-404A/R-23

Condition: ready for operation (used), Year of construction: 2019, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Lodpfx Ajzvm Azspmehk - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Year of construction: 2020, condition: new, Exhibition machine with AD 2000 Year of construction 2020 Compressor system HOS Suction capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation Filling capacity at 6 bar working pressure Maximum pressure 10 bar Tank capacity 270 l Number of cylinders 2 Number of compression stages 2 PU 1 Dimensions and weights Length approx. 720 mm Width/depth approx. 720 mm Height approx. 1770 mm Weight approx. 160 kg Electrical data Output power 4 kW Lhjdpfx Ajxg Ux Eepmok Supply voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level Lp 80 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Availability: short term Storage location: Flörsheim

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Lhsdpfx Aowd Ulvspmjk

Year of construction: 2026, condition: used, Tank capacity: 270 l Maximum flow rate: 0.92 m³/h Lhsdpfjyq R Apox Apmok Motor power: 5.5 kW Refrigerant dryer: Yes

Condition: new, Year of construction: 2023, machine/vehicle number: H2200058, power: 4 kW (5.44 HP), pressure (min.): 10 bar, new piston compressor available immediately: ALMIG HLA-10-10-270 (10 bar) with 270 liter compressed air tank with star delta connection Year: 2022 Lhedpfx Apezb E A Eomjk Hours: 0 h 3 cylinders Pressure: 10 bar Rated power: 7.5 kW Delivery quantity at 7 bar: 801 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1580 x 1311 x 657 mm Weight: 324 kg Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Lhjdpfx Ajzrnc Iopmjk Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. User-friendly in every detail. Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort.

Condition: new, Year of construction: 2025, operating hours: 1 h, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) include dryer include time drain include 2 filters include 270 liter tank galvanized Year 2025 / IMMEDIATELY AVAILABLE! Ledpfox Rb D Sex Apmjhk Technical specifications Type: BELT XP 8 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 447 kg Compressed air connection: G 3/4 "

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Ljdeyiz U Tspfx Apmjhk Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz) Lhedpfxjy Nkwlj Apmok

Year of construction: 2025, condition: new, Boiler capacity: 270 l Volume flow rate: 520 l/min Motor power: 4 kW Lodpfxjhhcxzs Apmjhk Refrigerant dryer: Yes

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Lhodpfx Apjtyyn Hjmjk

Condition: excellent (used), Year of construction: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of construction: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Lhsdpfezc Ntwex Apmjk Injection pressure: 2041 bar Metering volume: 653 ccm Clamping unit: Clamping force: 270 t Distance between tie bars: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with horizontal injection units arranged in parallel Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm Injection weight: 446.8 g Injection pressure: 2016 bar Dosing volume: 491 ccm Dimensions Weight: 15000 kg Length/width/height: 6.90x1.78x2.34 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Weiss WT-270/70/10 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-270/70/10 Year of manufacture: 2006 Machine type: Temperature testing chamber / Climate testing chamber Test chamber volume: approx. 270 liters For sale is a used temperature testing chamber from the manufacturer Weiss Umwelttechnik. The unit is suitable for temperature testing, environmental simulation, material testing, Lhedjzgcqvepfx Apmjk electronics testing, quality assurance, as well as research and development. Technical data Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 10 K/min Temperature change rate (cooling): approx. 14.5 K/min Test chamber volume: approx. 270 liters Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H) Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H) Weight: approx. 835 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A Refrigerant: R404A / R23 Refrigerant quantity R404A: 6.5 kg Refrigerant quantity R23: 2.3 kg Maximum suction pressure (ND max.): 19 bar g Maximum discharge pressure (HD max.): 25 bar g Standing pressure: 17 bar g Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side openings Insert grid / Test chamber equipment as shown in the pictures Control cabinet Main switch panel RS232 interface Documentation / Operating manual Scope of delivery 1x Weiss WT-270/70/10 Temperature Testing Chamber Existing documentation / Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: good (used), Year of construction: 2014, operating hours: 691 h, functionality: fully functional, machine/vehicle number: 636639, overall weight: 1,068 kg, load capacity: 210 kg, arm reach: 2,696 mm, This is a KUKA KR 210 R3300 K industrial robot with a KRC4 controller, manufactured in 2014. It is supplied together with a Z.TT.2Axes_500 two-axis rotary table with a load capacity of 500 kg. We would also be happy to offer this robot as a fully refurbished unit! The controller includes the following options: BoardPackage EthernetKRL Lodszgxgtspfx Apmohk LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech