Used Hochstein Pp300 for sale (35)

Condition: used, Year of construction: 1991, pressure 300 t distance between columns 1350/1000mm mm stroke 500 mm weight of the machine ca. 20 t table surface area 1900x1600 mm ram surface 1900x1600 mm table height 1000 mm Bjdpfxsvn U S Se Afmewp

Condition: used, functionality: unexamined, Press with hydraulic unit for sale Bsdpfx Afew Izriomswp

Year of construction: 1991, condition: used, pressure 100 t passage width 810 mm stroke 400 mm table surface area 1140x740 mm ram surface 1140x740 mm Bwedpjlp U D Njfx Afmop dayligth 670 mm weight of the machine ca. 8 t dimensions of the machine ca. 1800x1800x3000 mm

Condition: used, Year of construction: 1992, pressure 300 t passage width 1350 mm stroke 500 mm column travel -side 830 mm table surface area 1350x1380 (1870x1380) mm table height 1060 mm total power requirement 45 kW weight of the machine ca. 20 t Bwedpfx Afovn U Srsmsp dimensions of the machine ca. BxTxH 2500x2000x3950 mm

Year of construction: 1991, condition: used, pressure 150 t passage width 1100 mm stroke 500 mm Bjdpelp U R Dsfx Afmjwp table surface area 1100x1070 mm ram surface 1100x1070 mm hole in the table 475x450 mm table height 920 mm dayligth 800 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x3600 mm

Condition: ready for operation (used), Year of construction: 2018, cutting length (max.): 4,300 mm, Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details. Bsdpfx Aezdignefmowp • Cutting width (programmable pusher): approx. 4,250 mm • Max. saw carriage feed speed: 130 m/min (optional up to 150 m/min) • Saw blade projection: 80 mm (optional 95 mm) • Max. saw blade diameter: 350 mm • Main saw blade diameter: 350–380 mm (depending on configuration) • Main saw motor: 11 kW • Scoring saw motor: adjustable, 1.5–2.2 kW • Clamps: 7 units (2-finger design) • Control system: CADMATIC 4.1 / 4.5 or powerTouch (depending on configuration) • Total connected load: approx. 18.4 kW • Compressed air: 6 bar • CE marking: Yes • Stack height: up to approx. 80 mm (standard) • Extraction capacity requirement: approx. 3,350–5,230 m³/h • Processing: Single panels and stack cuts

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Bodpfx Aefg Ewzefmewp Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-95-7986, Used panel saw HPP 300/43/43, fully refurbished INTEGRATED FEATURES: • Saw blade projection: 80 mm • Cutting length: 4,300 mm • Right-hand machine configuration Bedpfxoy A Rgae Afmowp • Machine table along cutting line with air cushion • 4 tables • Infinitely variable pressure bar control • 7 clamps • Main saw motor power: 11 kW • Scorer motor power: 1.5 kW • Labeling software • Saw carriage speed: 130 m/min • ECO Plus technology: Up to 20% energy savings MACHINE OPERATION: • Operating panel • CADMATIC 5 ADDITIONAL INFORMATION: • Data transfer via WLAN + USB • Label printer • Power Concept DOCUMENTATION: • Selected languages: German, English • Format: Data carrier + paper documentation GENERAL INFORMATION: • Control system: POWERCONTROL with POWERTOUCH • CE certification: Yes • Availability: Ready June / July

Year of construction: 2018, condition: new, Potatoe / root peeling machines Productivity 1’500-2200 kg/h vegetable are peeled, washed, polished with rotating drum and brushes Automatic product discharge Bwedpfx Afodv Ednsmjp Simple and effective peeling, washing, polishing Can be attached to the transporter including in production line. 400V/3phase or can make 220V/3phase USA standard

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 11,900 h, Cutting dimensions: 4300x4300 mm Bedoytt H Aepfx Afmewp Blade diameter: 350 mm Label printer Total power: 20.9 kW Maximum cutting speed – 130 m/min, steplessly adjustable Maximum pusher speed – 90 m/min Maximum cutting height – 80 mm Four air tables Automatic scorer adjustment Year of manufacture – 2014 Operating hours – 11,900

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-240-14-5243, functionality: fully functional, cutting width (max.): 4,300 mm, cutting length (max.): 4,300 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Max. cutting length: 4,300 mm Max. cutting width: 4,300 mm MACHINE DETAILS Bodpfx Afexcnv Aomowp Voltage: 400 V Power consumption: 38 A Fuse: 50 A EQUIPMENT Documentation available CE marking present

Condition: excellent (used), functionality: fully functional, power: 30.16 kW (41.01 HP), color: green, fuel: diesel, operating hours: 360 h, Equipment: all wheel drive, car registration, Roberine F3 base machine with the following features: Engine: 3-cylinder Yanmar turbo diesel engine 30 kW (41 hp) at 2650 rpm Displacement 1500 cm³ Fuel tank 45 liters – sufficient for a full day’s work Speed: Mowing: Forward 13 km/h Reverse 9 km/h Transport speed: Forward 25 km/h Reverse 9 km/h STANDARD EQUIPMENT: 12V socket Cruise control Command arm Weight transfer system Standard delivery with a maximum speed of 20 km/h Traction and Drive Drive: Automatic hydraulic four-wheel drive (Drive by Wire) Mowing system: Hydraulic axial piston pump for the mowing units Hydraulic tank: Capacity 55 liters with oil level sight glass Tires, Brakes and Steering Front tires: Vredestein Greentax Turf 320/55 – 12 (26x12-12 8 PR) Rear tires: Vredestein Greentax Turf 250/50 – 10 (20x10-10 6 PR) Braking system: Maintenance-free hydrostatic braking system Parking brake: Maintenance-free disc parking brake on the front wheel motors Steering: Fully hydraulic rear-wheel steering including adjustable steering column Track width 150 cm Seat: Standard fully adjustable, comfortable air-suspension Grammer seat with automatic weight adjustment and control lever Indicators: Bedpfxozhkk To Afmewp Dashboard warning lights: Battery, engine oil pressure, cruise control, turn signals, low fuel level in tank, coolant and hydraulic oil temperature Indicators: Fuel level indicator, hydraulic oil level sight glass, digital hour meter Weight and Dimensions: Overall length: 280 cm Height: 234 cm with ROPS / 166 cm with ROPS folded down Overall weight without cabin: 1225 kg with ROPS Certifications F3 and R3: Certified according to CE Machinery Directive, protective device on the front of the two front flail mowing units ISO 17101-2, certified according to ISO 21299 for ROPS, STVZO-TÜV With the following options: MOWING UNITS ROBERINE F3 Number of mowing units: 3 independent, hydraulically driven flail mowing units through axial piston motors 3500 min-1 Mowing unit configuration: Fixed flail mowing unit with 12 flails Diameter 25 cm Equipped with a 3" support roller Mowing width: Variable 77 cm – 215 cm Height adjustment: 25 mm – 85 mm Weight transfer system: Electrically operated for better traction through weight transfer from the mowing units to the wheels ROPS frame Set, reversible fan Reverse fan for optimally clean ventilation grille in the hood Set, deflector Set, lighting kit (required for STVZO) Set, rotating beacon (frame) Set, protective covers for cutting units (required for road travel) Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control Bwedszf E Hqopfx Afmsp - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) Bsdpfxszf E Dvo Afmjwp - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: used, operating hours: 130 h, functionality: fully functional, power: 8.09 kW (11.00 HP), first registration: 12/2011, fuel: diesel, driver cabin: day cab, Equipment: all wheel drive, car registration, Park Ranger 2150 Nilfisk Egholm Park Ranger 2150 - Used Unit Year of Manufacture Base Unit: 2011 Cab: 2015 Operating Hours: 129 Technical Data - Base Unit Length mm 2225 Width mm 1015 Height with / without cab mm 1935 / 1210 Weight with / without cab 1) kg 670 / 560 Payload kg 630 / 740 Permissible Total Weight kg 1300 Engine: Perkins Diesel 403J-11 HP / kW 26 / 19 Four-wheel drive: Standard Drive System: Hydrostatic drive. Completely hydraulic operated machine carrier: requires minimal maintenance. Performance: Turning radius - curb to curb mm 3000 Turning radius - inside mm 1100 Working speed, max. km/h 16 Articulated Steering Quick-change system for all attachments Trailer hitch Liquid wax coating 12-Volt socket: For mobile phone charger Attachments Bwodpfxozf Ezbo Afmep Front sweeper (summer) with 3 side brushes from 2015 Height adjustment: The front wheel on the brush unit adjusts the optimum sweeping height while minimizing brush wear. Weight: 91 Kg Brush rotation speed: Infinitely adjustable. Dimensions Length mm 2900 Width mm 1200 Height with mounted hand suction hose mm 2200 Dimensions when parked Length mm 1350 Width mm 1010 Height mm 1920 Working width - 2 brushes: 1220 mm Working width to the 3rd brush: 1660 mm Hand suction hose: 6 meters Sweeper hopper from 2015 Net capacity: 438 liters Gross capacity of the sweeper hopper: 458 liters Sweeper hopper payload, max: 300 Kg Tipping height: 1300 mm Weight: 131 Kg Capacity of the fresh water tank: 100 liters Front sweeper (winter) from 2011 Dimensions Length: 3020 mm Width: 1220 mm Height with cab: 1935 mm Dimensions when parked Length: 900 mm Width: 1220 mm Height: 650 mm Weight: 101 Kg Performance Clearing width, straight position: 1220 mm Clearing width - 25°: 1140 mm Ground clearance under the brush: 420 mm Brush diameter: 550 mm Working speed: 1-10 km/h Theoretical sweeping performance: 12200 m2/h Clears snow depths of up to: 150 mm Brush rotation speed rpm 255 Swivel angle 25° Salt and grit spreader from 2011 Durable material: All parts in contact with salt and grit are made of corrosion-resistant plastic or stainless steel. Extra spreading material: Additional bags of salt and grit can be stored on the grid of the spreader hopper until the total weight is reached. This allows you to refill on the go. Support: This is used for quick and tool-free installation and removal, as well as for storage when not in use. Installation and removal are tool-free and easy on the back. Cover: Protects the spreading material from moisture. Dimensions Length: 2510 mm Width: 1015 mm Dimensions when parked Length with support: 1175 mm Width: 800 mm Height with support: 1350 mm Weights Weight with cab: 860 Kg Payload with cab: 440 Kg Weight (salt and grit spreader): 97 Kg Spreader Volume: 210 liters Spreader payload, max: 350 Kg Loading height: 1250 mm Performance Spreading width: 1000-5000 mm Operating speed: 1-16 km/h Subject to changes, printing errors, and prior sale. All information is provided without warranty. Sale is made excluding any guarantee or warranty.

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 10/2021, fuel type: diesel, operating hours: 65 h, Equipment: air conditioning, all wheel drive, car registration, hydraulics, trailer coupling, BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5070 x 1700 x 2190 mm (excluding mirrors) Wheelbase 2400 mm / 990 mm Tank capacity: Diesel 50 liters, AdBlue 25 liters, Hydraulic oil 50 liters Additional equipment affects unladen weight, payload and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, Type F1C, 2998 cm³, 4-cylinder diesel 110 kW / 150 hp at 3500 rpm. Torque: 320 Nm at 1200 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Permissible total weight 7490 kg Drive system (standard) Hydrostatic drive, ECO-Drive speed optimization Permanent all-wheel drive with self-locking differential High-pressure hydrostatic system (400 bar), max. output torque 500 Nm Steering (standard) Mechanically steered front axle with up to 40° steering angle Left-hand drive Power steering with hydraulic assistance 3rd axle forced steering and liftable Suspension (standard) Parabolic leaf springs with stabilizer Brakes (standard) ABS 6-wheel disc brakes with brake booster and spring-loaded parking brake Incl. 4-channel ABS braking system with anti-slip control Parking brake with optical and acoustic warning Tires 285/65 R16 (standard) Boki equipped with 285/65 R16C tires Frame (standard) With ball coupling system Ø 42 mm, for mounting tipper bodies and other superstructures Paintwork (standard) Cab + engine box: deep orange RAL 2011 Chassis: anthracite gray RAL 7016 Underbody protection Dinitrol (standard) Corrosion protection chassis Dinitrol 4010 Temperature resistant up to 210° resistant to alkaline and acidic influences can be washed off with special cleaner Hydraulic oil HVLPD 46 (standard) Filled with HVLPD 46 Service interval approx. 2000 hours Including the following winter equipment: Kugelmann spreader Duplex 2.5 m³ stainless steel Type SD B180 H80 L270 KH KA VA Stainless steel design (container and sheet metal parts made of stainless steel, glass bead blasted and painted with special paint) color RAL 2011 Dimensions: Hopper width (B): 1800mm Hopper height (H): 800mm Hopper length (L): 2700m Rear overhang (X): 50mm Discharge type: short Control k-tronic 2 Fixed cable harness Terminal box for cable separation Mounting kit Universal, spider for spreading width B105 - B120 Subframe for mounting on the tipper spider, mounted on the spreader Special paint of the spreader RAL 5002 Ultramarine Blue Access ladder A Duplex stainless steel Foldable with quick-release fastener Platform slip-resistant with handrail, suitable for Duplex spreader Electric spreading pattern adjustment (ESB) from the driver's cab Electric spreading pattern adjustment Standard (ESB) complete Electric servo - adjustment motor to move the spreading pattern position Display and adjustment of the spreading pattern position by means of control panel Hummel Vario - snow plow LF - D 2700mm With support foot, 2 double-acting hydraulic cylinders, 6 hydraulic hoses with couplings and horizontal adjustment Complete with hydraulic lifting and lowering device including Hydraulic cylinder, hoses, couplings and device-side mounting plate (DIN plate) Can be used in a variety of ways as: - side plow (diagonal plow) - wedge-shaped plow - V-shaped plow Paintwork: RAL 5002 Blue Height: approx. 900mm Weight: approx. 500Kg Total width: approx. 2700mm Snow plow - additional lighting consisting of 2 elastically mounted marker lights, holder, cable, plug Rubber - corundum strip 2700mm Bwodpfszf Etwex Afmjp Changes, typing errors, errors and prior sale are subject to chan

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Bodpfjzf Eh Usx Afmewp Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: used, functionality: fully functional, fuel type: diesel, color: orange, driver cabin: day cab, number of seats: 2, operating hours: 4,890 h, Equipment: car registration, Boki HY 1251 BOKIMOBIL municipal vehicle TYPE HY 1251 in standard configuration Manufacturer’s No. W09507250AOK51648 Engine type IVECO type F1C WITHOUT DUMP BODY Special net price including the following equipment: Extension of the wheelbase from 2,000 mm to 2,300 mm Driver’s comfort seat, manufacturer Grammer, air-sprung Protective cover for Grammer comfort seat Protective cover for standard seat/air-sprung passenger seat Sun visor for passenger All-wheel drive Instead of the standard rear-wheel drive Increase from 40 km/h to 50 km/h maximum speed Performance Package III Hydraulic Package II Tires 225/75 R 16 instead of the standard tires Increase of the permissible total weight from 3,500 kg to 5,000 kg Interior mirror Ventilation flap 550 x 260 mm Cyclone separator Towing eye for driving at walking speed with bracket and clamp BOKI swivel container system type 130T Width: 1300 mm Special net price including the following equipment: Bwodpezf Eawjfx Afmsp Hydraulic swivel for swivel container system 2 different chain lengths for accommodating the existing containers The container is not part of this offer. It is only used for better illustration and can be purchased separately! As is, no repairs! Subject to changes, typographical errors, mistakes and prior sale. All information is provided without warranty. The sale is made excluding any warranty or guarantee.

Condition: new, functionality: fully functional, first registration: 06/2026, fuel type: diesel, color: red, fuel: diesel, operating hours: 3 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, trailer coupling, LX 401 CAB KUBOTA 4WD TRACTOR LX401 CAB, DEMONSTRATION UNIT, LIKE NEW; NOT REGISTERED! CURRENTLY WITH 3.5 OPERATING HOURS With comfort cabin, Including 5-year manufacturer's warranty (up to 2,000 operating hours) Engine: 1,498 cm³, 4-cylinder Kubota diesel engine, CRS, EGR, DPF, emission stage V, Engine power according to EC 120 29.3 kW (39.8 hp), 4-valve technology, turbocharger, dual flywheel, fuel tank 32 l Transmission: 3-stage hydrostatic transmission, max. speed 30 km/h, automotive driving system, dual flywheel, cruise control 4WD: Engageable all-wheel drive, bi-speed steering system, rear differential lock Comfort: flat driver platform, fully hydraulic power steering, air-suspended comfort seat, 2 USB ports, storage compartment, cup holder, adjustable steering column, external rear PTO control Cabin: Spacious cabin, integrated 4-post design, effective heating, air conditioning with recirculation mode, LED work lights front and rear, rear window heating, rear window wiper and windshield wiper with washer system, 12-V socket, radio preparation, fender extensions rear PTO: Rear PTO 540 rpm, mid-mount PTO 2,500 rpm, independently switchable Hydraulic system: Flow rate 20.4 l (working hydraulics), max. working pressure 160 bar, rear three-point linkage Cat. I, lifting force at the lower link end 1,150 kg, standard front equipment: 3 functions (single lever control with 1x control valve double-acting, 1x control valve double-acting with float position, changeover valve 3rd function), 6x hydraulic couplings (SVK according to ISO 7241-1-A BG3) Standard rear equipment (electrically switchable): 2 functions (1x control valve double-acting, 1x control valve double-acting with float position), 4x hydraulic couplings (SVK according to ISO 7241-1-A BG3) Drawbar Permissible unbraked trailer load: 1,500 kg Permissible braked trailer load: 3,500 kg Permissible vertical load: 500 kg Dimensions Overall length: 2,983 mm Overall height (depending on tires) 2,145 – 2,175 mm Wheelbase: 1,695 mm Bodozf Dz Hopfx Afmewp Weight (ROPS/cabin) (depending on tires): 1,015/1,185 kg Max. front axle load (depending on tires): 1,080 kg Max. rear axle load (depending on tires): 1,920 kg Permissible total weight (depending on tires): 2,400 kg (with turf tires) IN ADDITION: - DAB+ radio with Bluetooth - Antenna splitter - Municipal tires front 220/55R14 - Municipal tires rear 320/70R20 - Front three-point linkage CAT 0 / coupling triangle - Front PTO cabin Oil-bath running gear with multi-disc clutch, shiftable under load, Nominal speed 1,000 rpm, standard profile 1 3/8", 6-piece, direction of rotation left when viewed in the direction of travel - Headlights at the top, for winter service - Rotating beacon LED - Fender set front 215 mm - Fender extensions rear - Height-adjustable drawbar - Automatic drawbar for height-adjustable drawbar - SAFETY EQUIPMENT KIT Consisting of: multipurpose lamp, fire extinguisher, combination bag with first aid kit, EC warning triangle, warning vest according to EN 20471 Class 2 Changes, typing errors, errors and prior sale reserved. All information is provided without guarantee. The sale is made with exclusion of any warranty.

Condition: used, functionality: fully functional, first registration: 09/2019, fuel type: diesel, color: orange, fuel: diesel, operating hours: 787 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, trailer coupling, - Enhanced drive system - 3-dimensional, double-acting front lift - Active hydraulic tilt adjustment - Electro-hydraulic implement relief - Locking block - Mechanical PTO shaft, front, 1000 RPM - Flow rate regulator 1 - Implement adjustment pump - Wiring harness for implement coding - Hydraulic kit 2 - Tire 31x10.5 R15 - Narrow track fender / edge protection (1 set) - Comfort package + winter package - 2 x work lights, rear and front - LED rotating beacon - Cabin mounted centrally - 40 mm - Hydraulic tilting mechanism for cabin - 7-pole socket, front - Reinforced wheel load equalization - Hydraulic tilting mechanism Bwodszf Amzepfx Afmjp List price Holder C65 DC - €114,188.74 The following options are available at an additional cost: 1. ADDITIONAL COST FLATBED DEMONSTRATION UNIT Flatbed 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750.00 plus VAT 2. ADDITIONAL COST DRAWBAR, NON-SELF-ADJUSTING HEIGHT ADJUSTABLE - DEMONSTRATION UNIT €470.00 plus VAT 3. ADDITIONAL COST Retrofitting of manual central lubrication system €1,600.00 plus VAT 4. ADDITIONAL COST HYDRAULIC REAR PTO SHAFT €1,990.00 plus VAT Subject to changes, typographical errors, errors and prior sale. All information is provided without warranty. The sale is made excluding any guarantee or warranty.

Condition: used, functionality: fully functional, first registration: 10/2018, Year of construction: 2018, URN28 V-shaped snowplow URN28 Bucher/Gmeiner Equipment No.: UR0007781R with rubber scraper blade and additional steel scraper blade Standard features: - Lightweight V-shaped plow, blade made of polyethylene - HD lifting and lowering mechanism - HD pivoting mechanism using two hydraulic cylinders - Hydraulic hoses complete with hydraulic couplings - Pivoting damping valve - Rubber scraper blade, URC version - Rubber scraper blade and additionally hydraulically adjustable steel scraper blades (URN version) - Plow boundary lights, LED - Support struts Bodpfx Aszfbvhjfmowp - Mounting plate (plow side) Without control panel, no control panel selectable Mounting hook, size 3 Boundary flags and warning markings Drive via vehicle hydraulics, 4-circuit Paint color RAL 2011, municipal orange Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Bwodpfx Ajzfbu Rofmjp Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm Bjdpfezd Riuox Afmewp weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: excellent (used), functionality: fully functional, power: 41.92 kW (57.00 HP), first registration: 10/2021, fuel type: diesel, color: orange, fuel: diesel, operating hours: 562 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C 55 SC - Low-emission diesel engine, - Engine compliant with emission stage 5 / Tier 4 final - 4 cylinders - Power output 42 kW (57 hp) - Single-operator comfort cab with heating - Air conditioning Bwodpfx Afszd D R Eomop - Tires: turf tires + winter tires + fenders, upon request - SDS driving comfort - Driver's seat with air suspension, backrest extension and lap belt - Wheelbase 1,820 mm instead of 1,700 mm as in C270, resulting in a vehicle 120 mm longer - 2 additional work lights at the front - Hydraulic Set 2 (3 double-acting control valves, 2 with floating position, 6 front quick-release couplings 2 rear quick-release couplings, connected via a T-piece with a front quick-release coupling, active hydraulic tilt adjustment, 1 multi-function joystick for 5 double-acting functions, including direction switch and speed control) - Hydraulic Set Flow Divider 1 (Flow divider for circuit 1, adjustable from 0-35 l/min with hose set to the front and rear, return line at the front and rear) - Hydraulic tilting system for superstructure frame - Heated exterior mirrors - Central lubrication system - Reinforced axle load distribution - LED rotating beacon - Front linkage, category 1, with hydraulic tilt adjustment - Hydraulic tilting system for cab - Locking bar - Hydraulic implement adjustment pump with 0-80 l/min - Mechanical front PTO shaft, 1,000 rpm - Work lights at the rear - Electrical socket, 7-pin, at the front - Electro-hydraulic implement relief - High roof - Color: Holder Orange RAL 2004 - Hydraulic oil level warning system - Reinforced axle load distribution The Kugelmann salt spreader and the front sweeper are not included in the offer and can be purchased separately if required. Subject to changes, typographical errors, and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: excellent (used), functionality: fully functional, first registration: 10/2025, fuel type: diesel, color: orange, fuel: diesel, operating hours: 128 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C55SC DEMO UNIT with the following features: Work Package 1 Front linkage, 3D, double-acting incl. safety hook CAT II / CAT I Top link slider and top link with passive tilt adjustment and vibration damping (accumulator) for front-mounted implements Active hydraulic tilt adjustment for tilt adjustment Electro-hydraulic implement relief Rest bracket required for drawbar, rear linkage Electro-hydraulic implement relief Rest bracket PTO shaft, mechanical, front 1000 rpm Flow control valve 1 Flow control valve, circuit 1, adjustable from 0-35 l/min Implement adjustment pump variable, line set to the front and rear return and leak oil line to the front and rear Hydraulic kit 2 - 1 multi-function joystick (large joystick) incl. direction switch and speed control - 3 double-acting control valves, 2 with floating position - 6 front quick couplings - 2 rear quick couplings, looped, connected to the front quick couplings via a T-piece Tire 31x13.5-15 Wide-track fender kit Comfort Package Air conditioning, driver's seat with air suspension incl. seat heating, left armrest WORK LIGHTS, FRONT Cabin, center-mounted Overall height reduced by 40 mm Hydraulic tilting device 7-pin socket, front for implement lighting Reinforced wheel load equalization Manual central lubrication system Hydraulic tilting device for superstructure frame, incl. control valve Heated exterior mirrors with bracket + switch Hydraulic oil level warning system Bjdpfxozd Dzdo Afmswp Work lights, rear Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.