Used Hirschman Pipetus 100 Rechargeable Pipette Controller for sale (58,820)

Condition: used, This listing is for a Hirschman Pipetus 100 Rechargeable Pipette Controller The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated color display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Podpfjxv Ax Sex Af Serb Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, This listing is for a Hirschman pipetus with charger station The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Pjdpfx Aoxv Dznsf Ssrb Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated colour display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible Predpfxjyz Dhze Af Sjb

Condition: used, This listing is for the Hirschmann Pipetus in it's original box (Opened) The unit is in full working condition and is ready for immediate use The Hirschmann Pipetus® is a modern, battery-powered pipette controller suitable for volumetric, graduated, and Pasteur pipettes ranging from 0.1 ml to 200 ml. It is designed for ergonomic use, precise liquid handling, and user-friendly operation. It represents the sum of all possibilities when it comes to pipetting – combining decades of experience, innovative technology, and superior-quality materials. Key Features Pjdpfx Aoxhgd Aef Serb One-button operation for both charging and dispensing of liquid. Fine dispensing valves with ceramic compound valve pins enable exact meniscus configuration. These valves are wear-free and provide maximum chemical resistance. Adjustable speed control: Precisely adjustable pumping and suction speeds for both filling and venting across five finely tuned performance stages. Battery: Rechargeable NiMH battery, up to 40 hours of continuous use. Charging: Inductive (contactless) charging via a microprocessor-controlled station — avoids memory effect. Display: Color display shows pipetting mode, speed settings, and battery status. Compatibility: Works with pipettes from 0.1 ml to 200 ml. Filter: Hydrophobic PTFE membrane filter, 0.2 µm, for contamination protection. Safety: Built-in safety valve prevents liquid ingress into the device. What's Included Pipetus® pipette controller Inductive charging and parking station Wall mount 0.2 µm PTFE membrane filter

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Podezukkgopfx Af Sorb Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2022, operating hours: 200 h, condition: excellent (used), functionality: fully functional, travel distance Y-axis: 269 mm, machine/vehicle number: 1111127689, Equipment: sliding door, Hello, the machine is in perfect condition. For more information, please contact me via email. Pedoyfrucjpfx Af Ssrb

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Podpfxszucxco Af Ssrb Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W Pjdpfozrv Hzex Af Sjrb • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K Pedpfszizlqox Af Serb - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle Pedpfxez Hcz Ss Af Sjrb - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Predpfjyc H I Sex Af Ssb Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, HB‑Therm HB‑100 U1 tempering unit, Tempering, Liquid tempering, Industrial tempering, Thermolator, Used machine Psdpfx Asx Emfwsf Sorb Manufacturer: HB‑Therm Type: HB‑100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: Water

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Thrust (ton) 100 Number of connecting rods 1 Bed size (x-y/mm) 950 x 660 Ram size X-Y (mm) 550 x 460 Stroke (mm) 20 - 160 Slide adjustment (mm) 80 Distance to the top dead center (mm) 370 Strokes per minute 70 - 130 Motor power (kw) 25 Equipped with Soprem die, width 400 mm, capacity 1250 kg Prsdjz Aukgopfx Af Sjb Beckhoff control

Condition: used, Year of construction: 2022, functionality: fully functional, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, grinding wheel bore: 20 mm, We offer this used Iseli Swiss BNF 100, a fully automatic 4-axis surface grinding machine, manufactured in 2022. Manufacturer: Iseli Swiss Model: Fully automatic 4-axis controlled flank grinding machine for band saws in wet grinding version / Type BNF100 Year of manufacture: 2022 • Flank grinding machine for set, as well as stellite and carbide-tipped band saws • Full enclosure with intensive water cooling • Equipped with a 4-axis CNC control system • Each movement is individually controlled via servo motors, resulting in minimal idle times • The advanced saw tooth can be finished in a clamped position • Electrically controlled, central saw blade height adjustment • Height stop for precise saw blade positioning • Use of roller linear guides for the CNC axes (stiffer machine construction and significantly increased service life) • Pneumatic saw blade clamping • Pneumatic additional clamping to stabilize thin saw teeth, resulting in increased dimensional accuracy • Operation via touch screen / color display • Data can be retrieved via the control system (standard storage space for 99,999 data sets) • Metric or Anglo-American measurement system selectable (mm or inches) + Dust extraction and auxiliary feed Technical data BNF100 Flank clearance angle: 0 - 7° Tooth pitch: 13 - 100 mm Blade width standard: 75 - 360 mm Blade width optional: 25 - 360 mm Blade length standard: from 5,300 mm Blade length optional: from 4,300 mm Grinding wheel variant 1: Ø 100 - 125 mm Prodpjz E Spcefx Af Seb Grinding wheel variant 2: Ø 75 - 100 mm Grinding wheel bore: Ø 20 mm If you have any questions or need more information, please send us a message or call us.

Condition: used, This listing is for the PIPETMAN L P1000L 100-1000uL Colour-code BLUE The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Podsxv Draopfx Af Ssrb Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for GE Axichrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column. Podsxxycaepfx Af Sorb The unit is in full working condition and ready for immediate use. Automated biopharmaceutical column packing system optimizing resin performance for purification

Condition: excellent (used), Year of construction: 2011, Type: Horizontal CNC: Yes MAZAK QUICK TURN SMART 100 S Podoz Hdx Sopfx Af Sorb Machine type: CNC Horizontal Turning Machine Manufacturer: Yamazaki Mazak Model: QUICK TURN SMART 100 S Year of manufacture: 2011 Country of manufacture: Singapore CNC control: MAZATROL SMART Number of axes: 2 Chuck size: 6” Maximum spindle speed: 6,000 rpm Maximum turning diameter: 280 mm Maximum machining length: 310 mm Maximum swing over bed: 580 mm Bar capacity: approx. 51 mm X-axis travel: 200 mm Z-axis travel: 340 mm Turret: 12-station Tailstock: Yes Spindle nose: A2-5 Spindle bore: approx. 51 mm Machine weight: 3,400 kg DESCRIPTION : MAZAK QUICK TURN SMART 100 S CNC lathe, manufactured in 2011. Equipped with MAZATROL SMART CNC control, 2-axis configuration, 6” chuck, 12-station turret and spindle speed up to 6,000 rpm. Maximum turning diameter 280 mm and machining length 310 mm. Machine weight: 3,400 kg.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Pjdpfx Afoz Ef N Aj Sorb Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 285 kg, load capacity: 6 kg, arm reach: 1,915 mm, pivoting range: 360 °, controller manufacturer: Yaskawa Motoman, controller model: NX100, input voltage: 400 V, type of input current: three-phase, For sale in excellent condition industrial robot Yaskawa Motoman YR-HP20 6-axis robot with NX100 controller robot model: Motoman YR-HP20-B10 Stable design, 285 kg, 6 kg load capacity and 1915 mm arm reach. The rotation range is 360°, making it versatile for various work processes Robot, control unit, cable, teaching panel, operating instructions robot: Yaskawa Motoman YR-HP20-B10 year of manufacture: 2008.08 load capacity: 6kg repeatability: 0.06 mm Serial number: SBM254-1-3 controller: MOTOMAN NX100 ERCS-HP20-AE00 year of manufacture: 2009.02 voltage: 400v 50Hz Robot Range of movement: J1: ±180° J2: +155° - 110° J3: +255° - 165° J4: ±200° J5: +230° - 150° J6: ±360° Speed ​​of movement: J1: 170 °/s (2.97 rad/s) Prsdpfx Aeyhxc Ajf Sob J2: 170 °/s (2.97 rad/s) J3: 175 °/s (3.05 rad/s) J4: 355 °/s (6.2 rad/s) J5: 345 °/s (6.02 rad/s) J6: 525 °/s (9.16 rad/s)

Condition: good (used), • Model – FMF 100 • Double-sided drilling machine • Min. diameter: 3 mm • Max. diameter: 300 mm Psdpfx Asuqma Aef Ssrb • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually

Condition: used, Year of construction: 2015, functionality: fully functional, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser Pedpfx Ajzrwc Def Sjrb If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 1,600 bar, total length: 4,000 mm, total width: 1,300 mm, total height: 1,900 mm, overall weight: 4,400 kg, warehouse no.: 503730 manufacturer: ENGEL Psdpfez Eabtox Af Sjrb type: e-max 310-100 controller: LC 200 A01 year of construction: 2011 clamping force: 1000 kN distance between tie-bars h x v: 460 x 410 mm size of mould plates h x v: 650 x 600 mm min. mould height: 150 mm max. mould height: 450 mm max. open daylight: 800 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 135 ccm injection pressure: 1600 bar equipment included incl. Spruepicker screen text german core pulling hydraulically 1x Anti vibration mounts mould heating 8x handling type: Angussentnahmegerät manufacture: ENGEL controller: ER-USP 5 year of construction: 2011 measures of machine l x w x h: 4m x 1.3m x 1.9m total weight: 4400KG

Condition: ready for operation (used), Year of construction: 2018, Belt sander manufactured in 2018. This HOMAG SANDTEQ W-100 features a robust design suitable for various sanding applications. It operates on a supply voltage of 400Y/230 V and is equipped with a 3-phase power system. If you are looking to get high-quality sanding capabilities, consider the HOMAG SANDTEQ W-100 machine we have for sale. Contact us for further details. Prsdjz D Htmepfx Af Seb - Supply Voltage: 400Y/230 V- Phase: 3 Phase- Frequency: 50 Hz- Maximum Operating Full Load Current: 35 A- Fuse: 50 A- Control Voltage: 24 V- Control Unit Brand/Model: HOMAG Easy Touch

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Prsdpfx Afowcfgbs Sob Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase • Lifting speed: 2 / 8 m/min • Control: radio remote control Podpfx Aeyrh I Ejf Ssrb • Condition: very good, normal signs of use