Used Hilma Hydraulic Machine Vise for sale (72,888)

Condition: ready for operation (used), jaw width: 100 mm jaw height: 41 mm span width: 160 mm total height: 127 mm Ksdpfx Asd Hurfop Aolw

Condition: used, Hydraulic machine vise, high-pressure clamping device KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Clamping range: 0 to 370 mm Opening width: max. 373 mm Guide rail height: 140 mm - 2 clamping ranges adjustable via pins Kedpfxsd Amwij Ap Ajlw - Rotating plate Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Kljdpfoy Uiyvox Ap Aew Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Klsdpfx Apoznhxbo Asw Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Type Hydromat. Kedpfx Apozdkbke Aslw Also ideal as a spare parts machine.

Condition: used, axle configuration: 3 axles, first registration: 09/2016, total length: 13,680 mm, total width: 2,550 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 9,500 mm, color: blue, Year of construction: 2016, Equipment: ABS, Total loading floor, from the front to the ramp: 950 cm. Flat loading floor: 810 cm. Internal height: 309 cm. Front overhang: 370 cm. Height from the front to the roof: 261 cm. Sliding roof / Edscha roof. = Further information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Kedpjzk H Uyofx Ap Aslw Suspension: Air suspension Rear axle 1: Twin tires; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 2: Twin tires; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 3: Twin tires; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 70%; Tire tread depth, right outer: 70% Weights Unladen weight: 9,200 kg Payload: 38,800 kg GVWR: 48,000 kg Maintenance APK (Technical Inspection): valid until 10.2026 Identification Model number: HYDRAULIC RAMP / FORK LIFT - MAC = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the texts provided.

Condition: good (used), hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice Klsdpsd S Ia Tjfx Ap Aow -Jaw width: 125 x 45 mm -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

Condition: good (used), machine vice, stable vice, drill press vice, drilling vice Kodpfxou Npfms Ap Aelw -Manufacturer: Fortis, machine vice type Q94160 -Clamping jaws: 160 x 40 mm -Clamping depth: 205 mm -Dimensions: 405/160/H115 mm -Weight: 28.5 kg

Condition: used, Machine vice, stable vice, milling machine vice, modular vice -Manufacturer: Gerardi, Modular Vice Klodpjglqzlofx Ap Aow -Jaw width: 195 mm -Back height: 60 mm -Clamping range: 450 mm -Dimensions: 695/195/H130 mm -Weight: 70 kg

Condition: used, Machine vise, stable vise, milling machine vise, modular vise -Manufacturer: Gerardi, Modular Vise - Jaw width: 195 mm - Jaw height: 60 mm -Clamping range: 345 mm Kjdpfx Ajglqzdop Aslw -Total dimensions: 595/195/H130 mm -Quantity: 1 piece available -Weight: 63kg

Condition: repair required (used), pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg Kodpedpvwiofx Ap Aelw

Condition: good (used), machine vice, stable vice, drill press vice Kedpfx Apjvvg Uho Aslw -Machine vice: clamping jaws 175 x 50 mm -Clamping depth: 125 mm -Dimensions: 520/200/H125 mm -Weight: 44.7 kg

Condition: used, milling machine vice, hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power vice, NC power clamping vice -Manufacturer: Röhm, hydraulic vice with rotary table Ksdou Rv R Sepfx Ap Aolw -Type: RB 135 -Clamping jaws: 135 x 40 mm -Clamping depth: 150 mm -Dimensions: 470/260/H150 mm -Weight: 47 kg

Condition: used, Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed Klsdpfx Apog Td E Ss Aow -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg

Condition: used, Machine vise, sturdy vise, drill vise Kedpfjfldb Tex Ap Ajlw -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg

Condition: used, Machine vise, sturdy vise, drill vise -Jaw width: 160 x 45 mm -Clamping depth: max. 260 mm -Tension: centric Kledpofxg N Uofx Ap Aow -Dimensions: 590/200/H125 mm -Weight: 36 kg

Condition: used, Machine vise, sturdy vise, drill vise Kljdpfx Aegtd Ddop Ajw -Jaw width: 160 mm -Back height: 45 mm -Clamping depth: 195 mm -Dimensions: 500/160/H135 mm -Weight: 30 kg

Condition: used, pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm Kledpfx Ajdpvwhep Asw -Back height: 51 mm -Span width: max. 330 mm -Dimensions: 550/200/H125 mm -Weight: 47 kg

Condition: used, Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled Kljdpfx Apjhhf Aio Ajw -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg

Condition: good (used), functionality: fully functional, Capacity: 250 x 6 mm Electric, variable angle adjustment, independently adjustable from 30 to 130 degrees Drive: Hydraulic Blade height and depth adjustable via potentiometers Table dimensions: 1200 x 900 mm Motor power: 5.5 hp Connection voltage: 380V Length: 1000 mm Width: 1200 mm Height: 1400 mm Weight: 1200 kg Kodpfx Aozi Hi Usp Ajlw VAT/margin: VAT: The price shown is exclusive of VAT (VAT is deductible for businesses) Please note: The information on this page has been obtained and compiled to the best of our knowledge and belief, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we advise you to verify all relevant details.

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Ksdpfx Aoy E Twaep Aolw Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Kedpov Upvrefx Ap Aslw

Condition: good (used), Year of construction: 2023, operating hours: 972 h, machine/vehicle number: 0223, Offer 26174 Technical data: - Bending capacity Klodpfszh Elxex Ap Ajw - Pipe at 45 kg / mm² Ø 6 - 48 mm - Wall thickness up to 3.25 mm - Max. bending radius 180 mm - Bending speed 20 °/sec. - Drive 400 V / 2.4 kW - Space requirement approx. W 6200 x H 1200 x D 1000 mm - Weight approx. 1100 kg - Operating hours recorded 972 h - with - Digital bending angle display + fine adjustment of bending angle - with SIEMENS SIMATEC control panel with touch screen - Mandrel bending unit 4.5 m with hydraulic retraction - Saw unit - Deburring unit for internal and external deburring - Pipe positioning system - Bending tools without mandrels - 6, 8, 10, 12, 16, 20, 22, 28, 30 mm - Partially, possibly incomplete

Condition: new, Year of construction: 2026, Conventional, NC- or CNC-controlled hydraulic press brake / folding machine Maximum bending length: 2,500 mm Maximum bending capacity: - Steel sheet DC01-A with a tensile strength of approx. 350 N/mm² or material S235JR – 4 mm - Stainless steel sheet 304L – 2.5 mm - Aluminum sheet H24, tensile strength approx. 145 N/mm² – 5.5 mm - Zinc sheet according to DIN EN988, tensile strength approx. 190 N/mm² – 4.5 mm Upper beam stroke up to 110 mm Maximum bending angle: 135° Kodpfxezhkgze Ap Ajlw Various back gauge options available: - Manual back gauge with 650 mm travel - NC-controlled back gauge with brush table or - NC-controlled back gauge with sheet supports and ball rollers Each with an adjustment range up to 1,470 mm Drive power: 5.5 kW Dimensions without back gauge: approx. 3.5 x 1.7 m x height 1.7 m Weight without oil filling: approx. 4,300 kg

Condition: used, Hydraulic CNC profiling and grooving machine LEISTRITZ, Type Polymat 50 / 400 CNC Machine No. 90, Year of manufacture 1990 Groove width max. 50 mm Working stroke max. 400 mm Maximum drawing force approx. 15.9 kN Groove depth feed rate 0 to 0.5 mm/stroke Cutting speed max. 20 m/min Return stroke speed max. 40 m/min Table size 440 x 595 mm Number of T-slots 3 T-slot width 14 mm Working height - table height 1405 mm Hydraulic oil tank capacity approx. 150 liters Cutting oil tank capacity approx. 35 liters Motor power (hydraulics) 5.5 kW Mains connection 380 volts, 50 Hz Klsdpezd Hiqjfx Ap Ajw - CNC control POLYMAT - Machining functions: Drawing - Automatic feed with shut-off - Hydraulic working stroke - Infinitely adjustable cutting speed - Oil lubrication - Hydraulic cylinder fitted with new sealing elements (2/2025) - Various accessories as shown Weight 1700 kg Space requirement L x W x H 1080 x 1400 x 1405 mm Good condition