Used Heyligenstaedt Cnc Lathe Heyligenstaedt - Ndc-710 for sale (12,782)

Condition: excellent (used), functionality: fully functional, spindle motor power: 100,000 W, total height: 2,900 mm, total length: 14,000 mm, total width: 3,500 mm, workpiece weight (max.): 16,000 kg, overall weight: 32,000 kg, distance table center to spindle nose: 8,250 mm, CNC Lathe HEYLIGENSTAEDT - NDC-710 MACH-ID 9801 Make: HEYLIGENSTAEDT Type: NDC-710 Control: R&D MTC3 4 Chuck 1400 mm Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1120mm Spindle power: 100kW Bed width: 850mm Tailstock spindle Ø: 250Ø Stroke pinole: 200mm Csdjzx Srgspfx Albjhb Spindle taper: 80Mk Power: 100kW Speeds / ranges: 0,8 - 355Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 16000 Length: 14000mm Width: 3500mm Height: 2900mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. All the machine's mechanical properties are perfect. The machine is very rigid and can achieve tolerances as tight as 0.01 mm. Chjdpszwdamofx Albjb It can also be used as spare parts.

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Cjdpfx Aezi Ihfjlbohb Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: N70089, MACHINE SPECIFICATION Swing over bed 400mm Swing in gap 585mm Swing over cross slide 246mm Distance between centres 1250mm Spindle nose (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Spindle speeds (programmable) 15-2700rpm Tailstock quill taper No. 5 MT Approximate nett weight 2200Kg Cedpfszx R Hpex Albshb Machine Equipped with Fanuc OiTC CNC Control System Hydraulic 3 jaw chuck 8 Station turret 8 off VDI toolholders Guarding Coolant system Lighting

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm Chedpfjxdmgvjx Albjb CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 2011, operating hours: 41,800 h, functionality: fully functional, turning length: 550 mm, turning diameter: 280 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,800 mm, total length: 2,100 mm, total width: 1,350 mm, quill travel distance: 500 mm, quill diameter: 60 mm, quill stroke: 125 mm, type of input current: AC, torque: 121 Nm, overall weight: 4,000 kg, chuck outer diameter: 225 mm, Equipment: documentation/manual, For sale is a TC400 52MC CNC turning machine from the German manufacturer Spinner Werkzeugmaschinenfabrik GmbH, built in 2011. It is in good used condition, with 41,816 hours of active operating time, of which 15,048 hours represent machining time. The machine has not been in operation for the last 5 years and was serviced by a Spinner technician in July 2025. It features a tool turret with 12 driven tools, an automatic workpiece removal system with a conveyor belt, a chip conveyor, and 4 foot pedals. The technical documentation in German and English, the wiring diagram of the electrical lines, the service manual, the latest maintenance reports, the original invoice, and several supplementary tool brochures are included in their original form. In addition, various tools are included, which are still functional, some of which have barely been used. Manufacturer: Spinner Werkzeugmaschinenfabrik GmbH Model: TC400 52MC Machine No.: AU0474 Year of manufacture: 2011 Weight: 4,000 kg The detailed technical specifications can be found in the excerpts from the technical documentation in images 2, 3, and 4. The price of the machine includes the machine itself, some tools and accessories, as well as loading onto a truck (a suitable forklift is available). Any shipping or collection must be arranged separately and is not included in the price. Cjdpey Nxd Hofx Albjhb The price of the machine is quoted as a net price. If you are interested, please contact us by email, direct message, or by phone. We will gladly send you a current video to demonstrate the machine's functionality upon request. Fitok GmbH, Moritz Hanesch, 07.05.2026, updated 28.05.2026

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,040 mm, turning diameter: 580 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,040 mm, TECHNICAL DETAILS Turning diameter: 580 mm Turning length: 1,040 mm Cjdpfx Aozu Rzrelbshb Spindle speed: 3,500 rpm Travel range X-axis: 2,500 mm Travel range Z-axis: 1,040 mm Tailstock diameter: 85 mm MACHINE DETAILS CNC control: Fanuc 18T-C Dimensions & Weight Dimensions (L × W × H): 4,650 × 2,320 × 2,060 mm Machine weight approx.: 7,200 kg EQUIPMENT VDI turret with 12 driven tool stations Chip conveyor Machine without tailstock Foot switch Chuck Turning chuck

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 00320002700, spindle bore: 91 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, total height: 2,500 mm, total length: 6,000 mm, total width: 2,200 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 99 A, workpiece length (max.): 1,225 mm, nominal power (apparent): 65 kVA, workpiece diameter (max.): 480 mm, workpiece weight between centers: 500 g, operating hours of spindle: 1,103 h, Equipment: chip conveyor, documentation/manual, DMG MORI CLX 550 CNC lathe Chsdpfxjzxy R Ro Albeb - Bed inclination: 45° - Bed diameter: 700 mm - Max. slide diameter V1 to V3: 500 mm - Max. workpiece diameter: 480 mm, in the front workpiece diameter: 320 mm - Distance between centers: 1450 mm - Y-axis travel: 120 mm (+- 60 mm) - Z3-axis travel: 1200 mm - Spindle height from axis to ground: 1043 mm - Main spindle, bar capacity: 80 mm - Bar diameter: 81 mm - Front bearing diameter: 130 mm - Resolution axis C1: 0.001° - The machine has a tailstock - Distance between two spindle centers: 1495 mm - Z1 axis travel: 1200 mm - Max. workpiece length: 1140 mm - Max. workpiece diameter: 450 mm - Bar capacity of the tailstock: 50 mm - Bore diameter of the tailstock: 73 mm - Bar diameter: 52 mm The machine is equipped with a tailstock (fitted with a three-jaw chuck SMW AUTOBLOK, diameter: 210 mm), as well as a 12-position tool turret, including powered tool stations, and an SMW AUTOBLOK three-jaw chuck, diameter: 250 mm. It also includes a chip conveyor, filter extraction, and documentation and CDs. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: used, Year of construction: 2008, machine/vehicle number: M11W100487, turning diameter over cross slide: 550 mm, turning length: 2,500 mm, turning diameter: 610 mm, spindle bore: 125 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 2,560 mm, spindle motor power: 42 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 2,500 rpm, feed length X-axis: 410 mm, feed length Y-axis: 180 mm, feed length Z-axis: 2,560 mm, quill travel distance: 150 mm, quill diameter: 150 mm, quill stroke: 150 mm, swing diameter over cross slide: 550 mm, turning diameter over bed slide: 820 mm, torque: 2,000 Nm, overall weight: 6,000 kg, swing diameter over bed slide: 820 mm, chuck outer diameter: 400 mm, spindle nose: A2-11" (KK11) DIN 55026, CNC Turning Center EMCO Maxxturn 110 | Year of Manufacture: 2008 | Spindle A2-11" & Y-Axis For sale is a powerful CNC turning center for complete machining from the manufacturer EMCO, model Maxxturn 110. Equipped with the large A2-11" main spindle (ZF two-stage gearbox), C-axis, Y-axis, and driven tools, the machine is ideal for heavy machining and complex milling operations. General Machine Data * Manufacturer: EMCO * Model: Maxxturn 110 * Year of Manufacture: 2008 * Serial Number: M11W10048 * Control System: Siemens SINUMERIK 840D (with ShopTurn) * Machine Weight: 6,000 kg (L2500) Working Area * Swing diameter over bed: 820 mm * Swing diameter over cross slide: 550 mm * Max. Turning Diameter: 610 mm * Max. Part Length: 2,500 mm (depending on equipment) * Distance between centers: 1,666 mm / 2,666 mm Travel & Feeds * X-axis: 410 mm (rapid traverse: 24 m/min) * Z-axis: 2,560 mm (rapid traverse: 30 m/min) * Y-axis: -80 / +100 mm (rapid traverse: 12 m/min) Main Spindle (A2-11") * Spindle connection: A2-11" (KK11) DIN 55026 * Drive: ZF gearbox motor (2-stage: 1:1 / 1:4) * Speed range: 0 - 2,500 rpm Chsdpfx Alszypxtobeb * Drive power (100/40% ED): 35 / 42 kW * Torque (100/40% ED): 1,672 / 2,000 Nm * Spindle bore: 125 mm * Bore in draw tube (part-through boring): 110 mm * Bearing inner diameter (front): 190 mm * Clamping device: Röhm power chuck (prepared for max. 400 mm) C-Axis * Drive: Automatically swiveling gearbox motor * Torque: 2,000 Nm * Holding torque spindle brake: 2,400 Nm * Rapid traverse: 15 rpm Tool Turret & Driven Tools * Number of stations: 12 (all driveable) * Tool holder: VDI 50 (DIN 69880) * Additional holders: 12 block tool stations on the circumference * Switching time (incl. locking): 0.5 s * Speed of driven tools: 0 - 4,000 rpm * Power of driven tools: 10 kW * Torque of driven tools: 56/66 Nm (Siemens) Tailstock & Steady Rest * Quill stroke: 150 mm * Quill diameter: 150 mm * Taper: MK 5 * Max. clamping force: 22,500 N * Steady rest: Prepared for traveling steady rest (e.g. Röhm SLZ 1152) Coolant & Disposal * Hinged belt chip conveyor (integrated into the basic machine) * Coolant pressure through turret: 7 bar (optional 14 bar) From an insolvency proceeding, sale as is. Offer deadline: September 30, 2026, 6:00 PM. Package price for multiple machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM - 12:00 PM, Fraunhoferstraße 10-12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM - 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ML0377-000140, turning length: 1,280 mm, turning diameter: 376 mm, spindle bore: 780 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,900 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 200 rpm, turning diameter over bed slide: 780 mm, type of input current: three-phase, We offer this Doosan PUMA 2600LY II CNC turning and milling center in like-new condition, manufactured in 2020. The machine has not been put into operation and has not been turned on since it was new. Power-on time: 0 Model: PUMA 2600LY II Serial number: ML0377-000140 Cedpfoy Nmdnox Albshb Supply voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Rated power: 49.06 kVA Interrupting capacity: 5 kA Current at full load: 74.65 A Short-circuit capacity: 10 kA Circuit diagram version: P210SYH840A07 Weight: 7400 kg Date of manufacture: 2020-11 - Hydraulic chuck 255 mm (10”) – 3-jaw, with a set of soft jaws and a set of hard jaws - Hydraulic unit - Coolant system with a high-pressure pump (min. 7 bar) - Box guideways for all axes – induction hardened - Slant bed (min. 30°) - Work area lighting - Front door safety switch - Leveling pads - Color monitor - Conversational/Graphic programming support - Turret (min. 12 stations) - Tool holder kit: min. 2 straight driven holders; 2 angular driven holders; 8 static holders for drills and boring bars - Full telescopic covers for guideways - Full machine enclosure - Programmable tailstock (MT5 center) - 3-color status light (stack light) - Automatic tool presetter / tool probe - Tool monitoring system - Electrical filter - Bar feeder interface - Automatic parts catcher and parts box - Thermal compensation function - Direct drive spindle - Spindle speed: min. 4000 RPM - Built-in network card (Ethernet) - USB port - Hinged belt-type chip conveyor - Oil skimmer - Toolbox - Radial driven tool holder x2, Axial driven tool holder x2 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment Tool magazine: 12 positions Chodpfx Ajzvnbxolbob Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,000 h, functionality: fully functional, turning diameter: 309 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 89 mm, travel distance Z-axis: 406 mm, controller model: Fanuc Typ 18i-T, TECHNICAL DETAILS Maximum turning diameter: 309 mm Spindle speed range: 25 – 6,000 rpm Travel in X-axis: 89 mm Travel in Z-axis: 406 mm Collet diameter: 42 mm Chodpfx Aozu Rz Eslbeb MACHINE DETAILS Control system model: CNC Fanuc Type 18i-T Spindle motor drive power: 11 kW Operating hours: 28,000 h Machine weight: approx. 5,000 kg EQUIPMENT C-axis Y-axis 12-station turret VDI 30 Powered tools at each station Power chuck, diameter 140 mm Hydraulic steady rest Workpiece collection system Chip conveyor Coolant system

Condition: good (used), Cazeneuve CNC lathe with NUM CT200 control and tailstock. Chsdpfozndv Nsx Albeb

Condition: like new (used), Year of construction: 2024, functionality: fully functional, MAZAK QUICK TURN 350MY 1500U Max. machining diameter: 420 mm Max. machining length: 1,625 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Max. bar diameter: 105 mm (!!!) Chodpfezyal Dsx Albsb The machine is equipped with: - CNC control system Mazatrol SmoothG - KITAGAWA 3-jaw chuck BR-12, diameter 304 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder magazine - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 178501, turning length: 1,000 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 700 mm, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 5,000 kg, controller manufacturer: OKUMA, controller model: OSP-P 300 L, input voltage: 400 V, input frequency: 50 Hz, input current: 154 A, nominal power (apparent): 29 kVA, Equipment: chip conveyor, OKUMA LB 3000 EX 2 - M C 1000 CNC lathe Chodpfx Aezxyd Delbob - includes driven tool stations and a C-axis The machine is equipped with a tailstock, a 12-position tool turret, and a three-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, including a chip conveyor. FCA D-63843 Niedernberg

Condition: ready for operation (used), Year of construction: 1985, Mazak Slant Turn 40 MC CNC lathe with chip conveyor. Year of manufacture 1985, weight 8 tons. Control system Mazatrol T3, with three-jaw chuck, tool turret, tailstock. Ready for use, can be viewed while still powered. Chjdpfx Aovzgyhslbeb

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, turning length: 600 mm, turning diameter: 300 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 670 mm, spindle motor power: 11 W, rotational speed (min.): 3,500 rpm, total length: 2,620 mm, total width: 1,480 mm, overall weight: 4,000 kg, bar passage: 65 mm, spindle nose: MT-NO.7, Equipment: documentation/manual, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine features a rigid construction, hydraulic chucking, and automatic tool changing, making it suitable for both small and medium production runs. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Chip conveyor *Specifications to be confirmed according to the individual machine configuration. ADVANTAGES Chsdpfx Ajzwdqrolbjb DAINICHI, Japanese machine construction Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT IS NOT FUNCTIONAL. IT CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3-JAW CHUCK.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 845000756E, turning diameter: 400 mm, spindle bore: 103 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,400 mm, total length: 6,000 mm, total width: 2,400 mm, overall weight: 8,000 kg, bar passage: 90 mm, center height: 360 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 50 kVA, operating hours of spindle: 4,617 h, Equipment: documentation/manual, DMG MORI ECOTURN 510 CNC lathe - Chuck diameter: 250 mm - Diameter in the front bearing: 140 mm - Feed drive in the X and Z axes: 40 x 10 mm - Feed forces X/Z: 7.5 kN - Y-axis feed force: 7000 N - Rapid traverse C1 axis: 100 m/min - Travel measuring system X/Y/Z: absolute rotary - Positioning uncertainty X: 0.008 mm, Z: 0.010 mm Chodpfjzxzc Iox Albsb - Working area, distance between centers: 1150 mm - Max. swivel range above the bed: 680 mm - Swivel range above the X slide: 465 mm - Travel of the Y-axis: 120 mm (+/- 60 mm) The machine is equipped with a tailstock and a 12-position tool turret, including the tool holders located in the turret, as well as a three-jaw chuck SMW AUTOBLOK, diameter: 300 mm, including a chip conveyor, filter extraction, and documentation. FCA D-73529 Schwäbisch Gmünd - to be loaded onto a truck.

Condition: used, Safop Leonard-90TT/CNC horizontal axis turning lathe Model Leonard-90TT/CNC 70 ton capacity 1750mm swing 9000mm between centres Twin saddle Hydrostatic bed 1700mm diameter 8-jaw chuck Siemens Sinumerik 840 DSL controls Chodpfx Ajzwmw Uelbob Date of manufacture: 2013 Serial No. 3432 Swarf conveyor Safety enclosure Quantity of tooling Euro cold twin fan chiller

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52000901-01, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, type of input current: AC, overall weight: 3,300 kg, Equipment: documentation/manual, CNC lathe in very good condition for sale. Cjdpfx Aljzxy Ngebshb Turret head with 8 tool positions. Hydraulic chuck D160 with numerous spare jaws. Complete documentation is available. For further information or videos, please contact me privately!

Condition: used, Safop Leonard 70 CNC Roll Turning 30 ton capacity 1000mm Swing 6000mm between centres Twin saddle Hydrostatic bed 1000mm 4-jaw chuck Powered tailstock Swarf conveyor (2) Fume extraction cabinets EATA chiller safety enclosure Siemens Sinumerik 840c controls Date of manufacture: 2000 Cjdpfx Alezwmkhjbshb Serial No. 5298

Condition: good (used), Year of construction: 2015, Haas ST-20 SS Cedpfx Aszyymzslbjhb Year of manufacture: 2015 Tool setter Tailstock Chip conveyor Tooling

Condition: used, Year of construction: 2008, operating hours: 12,183 h, machine/vehicle number: 1060142, turning diameter: 32 mm, spindle speed (max.): 5,000 rpm, overall weight: 4,000 kg, Frontal twin-spindle lathe for re-machining rough-turned parts produced by cold forging, turning, or sintering. Cjdpfx Aljzhktzebshb Integrated dual-gripper robot for loading and unloading.

Condition: not inspected (used), Year of construction: 2000, machine/vehicle number: X188C001, Cyclic lathe WAGNER / CHEVALIER FCL - 1840 S Delivery terms: Free on board, truck Location: 74906 Bad Rappenau Collection: The machine must be collected on 07.10.2026. The exact collection time will be arranged with us in advance. Payment terms: Payment in advance – by bank transfer Technical data: Bed width: 356 mm Turning diameter over bed: 460 mm Turning diameter over cross slide: 230 mm Center height: 230 mm Distance between centers: 1,000 mm Spindle speed: 40 – 2,000 rpm Spindle speed stages: 3 stages Spindle speed (low range): 40 – 200 rpm Spindle bore: 58 mm Taper in spindle: MK6 Longitudinal travel Z-axis: 900 mm Transverse travel X-axis: 250 mm Upper slide travel: 152.4 mm Upper slide stroke: 125 mm Size of tool holder: 25 x 25 mm Tailstock: Diameter: 65 mm Travel: 150 mm Cjdpfx Alszx S I Iebehb Taper: MK4 Feed & Accuracy: Feeds: 0 – 5,000 mm/min Rapid traverse X/Z-axis: 5,000 mm/min Positional accuracy: ±0.01 mm Repeatability: ±0.005 mm Spindle runout: 0.007 mm Scope of delivery: Existing manuals as shown in the pictures Three-jaw chuck Drawer cabinet with contents Existing accessories as shown in the pictures Dimensions & Weights: Installation dimensions L x W x H approx.: 2900 x 1700 x 1900 mm Weight approx.: 2300 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►If desired, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data is subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a high-quality CNC carousel turning, boring, and milling center from the German manufacturer Konrad Seidler from Neuss – Holzheim, model: MINIMAX 1800, built in 2013. The machine comes from a single owner and was used in a single-shift operation in our own production facility. After the commissioning of a new manufacturing solution, the machine was decommissioned, the spindle was renewed/overhauled, and the machine underwent a comprehensive service. Since then, it has been in operational condition but is no longer used in production. The machine is in fully functional and ready-to-use condition. An inspection and a test run under power can be arranged at any time. Chsdpfx Ajzhlbmslbeb Of particular note is the extensive overhaul of the boring/milling spindle in 2025, which brought a significant wear component of the machine back to like-new condition technically. Investment costs: 36.5 TEUR. Documents available. Highlights: • Turning, boring, and milling center in one machine • Year of manufacture: 2013 • Siemens 840D SL CNC control system • SINAMICS 120 drive technology • Tool changer with 16 stations • HSK100 tool holder • Rotary table load: 6,000 kg • Rotary table speed: 5–500 rpm • Milling spindle up to 6,000 rpm • High-pressure coolant system: 30 bar • Chip conveyor • Walk-in work area • Single owner • Extensive documentation available • Available for short-term delivery In 2025, the installed Capellini high-performance spindle (HSK100, 6,000 rpm) was completely overhauled by a specialized company (Deuschle). Excerpt of work performed: • Measurement of all components on a measuring machine • Replacement of precision bearings (FAG / SKF / GMN / NSK) • Replacement of the HSK100 clamping system • Replacement of Balluff sensors • Refurbishment of the spindle shaft using laser welding and grinding • Replacement of all wear parts • Fine balancing according to ISO 1940 • System balancing of the complete spindle assembly • Adjustment of bearing spacers • Final inspection including test report Technical data: Control system: Siemens 840D SL Drives: SINAMICS 120 Turning diameter: 500–1,270 mm Rotary table load: 6,000 kg Rotary table speed: 5–500 rpm Boring/milling spindle: 30 kW Torque: 190 Nm Boring/milling spindle speed: 2–2,500 rpm (max. 6,000 rpm) Tool holder: HSK100 Tool changer: 16 tools Coolant system: 6 bar / 30 bar high pressure Chip conveyor: Cross conveyor, discharging to the left Discharge height: 1,200 mm Machine weight: approx. 22,000 kg Enclosure: Double sliding door, walk-in work area Documentation available: • Operating manuals • Installation manuals • Electrical diagrams (partly) • Documentation of machine components • Documents for the control system • Documents for the chip conveyor • Other original documents from the commissioning Sale ex works, excluding loading. The buyer organizes the crane and transport. If you have any questions or need more information, please send us a message or call us.