Used Helmerding Eh 25 for sale (16,861)

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Nledoyath Tjpfx Ag Ish Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 25 t, table width: 360 mm, table length: 560 mm, throat depth: 180 mm, total length: 1,680 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 1,750 kg, ram adjustment: 60 mm, Projection 180 mm Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Fold-through hole in table 150 x 100 mm Table adjustment 150 mm Ram stroke 12-80 mm Njdot Sgruspfx Ag Iolh

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm tool hole in ram Ø35 mm Nsdsxh Sx Eepfx Ag Ijlh weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: used, Year of construction: 1988, functionality: fully functional, Press capacity 5,000 kN Table area 2,400 mm x 1,700 mm Ram area 2,400 mm x 1,400 mm Adjustable stroke 25 mm - 200 mm Ram adjustment max. 200 mm Nodpfjyg Emzjx Ag Ielh Stroke rate 20 - 100 spm Drive power 84 kW Machine weight approx. 62,500 kg with roller feeder/straightener combination + decoiler Further data and photos available on request

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination Nljdpfedzqmzox Ag Ioh - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 17,446 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 110 t, working width: 3,100 mm, number of axes: 8, oil tank capacity: 130 l, overall weight: 8,900 kg, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, power: 11 kW (14.96 HP), input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. Njdpfx Agex N Ibhe Ielh The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Njdpszcyqmjfx Ag Ijlh

Condition: used, functionality: fully functional, Year of construction: 1992, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, pressing force: 250 t, table length: 4,050 mm, type of input current: three-phase, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) Njdsy D Sy Repfx Ag Islh - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Machine type: Press brake Performance Data Press force: 800 kN Press force: 80 t Working length: 2,550 mm Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Rated current: 29 A MACHINE DETAILS Nedpfo Adzr Rsx Ag Ielh Dimensions Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Year of construction: 2002, operating hours: 1,209 h, condition: good (used), functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 6,000 m³/h, Used welding fume extraction system with few operating hours. In good condition. Available immediately. Nods Afv H Eepfx Ag Ijlh

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 25,002,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Nledez Ecfhepfx Ag Ijh Grinding table 2500 x 930 Includes existing grinding belts.

Condition: used, Year of construction: 2002, pressure 80 t throat 300 mm Nsdpfx Agjy I Dd Ne Ielh stroke 8-110 mm no. of strokes 100 Hub/min ram - range of adjustment 75 mm table surface area 750x590 mm ram surface 540x400 mm hole in the table 200x200 mm table height 780 mm tool hole in ram Ø 40 mm total power requirement 11 kW weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 1200x1700x2700 mm

Condition: used, Year of construction: 2012, Industrial robot Manufacturer: Kuka Type: KR120 R2500 pro with Kräutner DKP1 tilting rotary table Year of manufacture: 2012 Operating hours: under 200 hours Reach: 2,496 mm Weight: 1,049 kg Payload: 120 kg Kuka KRC4 controller with 2 additional axes Year of manufacture: 2012 Weight: 140 kg Software: KSS 8.2.15 User Tech 3.1.2 Expert Tech 3.1.0 Gripper-Spot Tech 3.0.1 Remote Service 1.0.0 Interface X11 for safety circuit Interface Beckhoff EtherCat for digital I/O Kuka TouchPad KCP4 Kuka connecting cables Nodpfxexp N A Rj Ag Ijlh 61026ä

Condition: ready for operation (used), functionality: fully functional, operating hours: 12,341 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load Capacity Load capacity: 2,500 kg Mast Mast type: Triplex mast with full free lift Lifting height: 6,430 mm Free lift: available Drive and Battery Drive type: Electric Battery type: Lithium-ion Battery year of manufacture: 04/2019 Battery voltage: 90 V Battery capacity: 268 Ah Measured idle voltage: 95.3 V Hydraulics Hydraulic valves: 3rd and 4th valve Fork positioner: Multi-directional fork positioner Side shifter: available MACHINE DETAILS General Manufacturer: Linde Type: E25 Year of manufacture: 2019 Operating hours: 12,341 h Own weight: 5,300 kg Dimensions Nedpsz R D A Tofx Ag Iolh Overall length: 3,650 mm Overall width: 1,150 mm Overall height: 2,824 mm Inspections and Service Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 EQUIPMENT Full cabin without driver's door Heater Windshield wiper Tilt angle display White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Orange warning light Safety light (front) Safety light (rear) Rear view camera Comfort seat All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 254

Condition: used, mileage: 32,790 km, power: 92 kW (125.09 HP), first registration: 03/1958, fuel type: diesel, empty load weight: 5,670 kg, maximum load weight: 3,630 kg, overall weight: 9,300 kg, tire size: 8.25-20 EHD, axle configuration: 4x4, color: red, driver cabin: other, gearing type: mechanical, number of seats: 6, Year of construction: 1958, front tire size: 8.25-20 EHD, rear tire size: 8.25-20 EHD, Equipment: all wheel drive, Vehicle location: en route / in transit Nedpez D Un Eefx Ag Ielh Klöckner H-Deutz ELF/TLF 16/25 A3500/6 Year of manufacture: 1958 All information is provided without guarantee, as the vehicle is currently en route! Sales to commercial businesses or for export are subject to an additional 19% VAT. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, with feed mechanism with linear guide, 400 mm band width, 3 mm band thickness with reel: 2000 kg, band width 360 mm, with drive PLC: Siemens SIMATIC S7-300 Operator panel: Siemens SIMATIC HMI OP277 Control technology comprehensively modernized (retrofit 2021) Press data: Pressing force: 800 kN Njdpfez Dv Uaex Ag Islh Stroke: 8 - 110 mm Installation height: 390 mm Stroke rate: 30 - 120 /min Ram adjustment: 100 mm Table: 1000 x 800 mm Ram: 1000 x 800 mm Weight: 16000 kg Dimensions: 3400 x 2000 x 2000 mm (h x w x d)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion system connected by a torsion bar to grant a planar movement of the movable press platen. Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork. Nsdpfx As Ad Hatog Ijlh

Condition: excellent (used), Year of construction: 2001, HELMERDING Press KDH 400/2600/2 Pressing force 4,000 kN Stroke rate 15-60 strokes/min Stroke adjustment 80-250 mm Slide adjustment 175 mm Installation height 550-800 mm Table area 2,500x1,600 mm Nljdpfxjz Ek Anj Ag Ijh Slide area 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Weight 106,000 kg Lorenz Strip Line EWH 600/150 Strip width 80-600 mm Strip thickness 0.6-6.0 mm Max. coil weight 7,500 kg

Condition: good (used), Year of construction: 2005, control type: CNC control, controller manufacturer: Delem DA65, bending force (max.): 175 t, working width: 3,100 mm, distance between stands: 2,550 mm, operating speed: 10 mm/s, number of axes: 5, overall weight: 11,500 kg, total length: 4,000 mm, total width: 2,000 mm, total height: 3,000 mm, power: 15 kW (20.39 HP), Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 175T Beam stroke: 225mm Table Width: 150mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Nlsdeyvz H Rspfx Ag Ijh Number of controlled axis: 5 Control: yes Crowning: yes Hydraulic toolclamping: yes Power: 15kW Length: 4000mm Width: 2000mm Height: 3000mm Weight: 11500kg

Condition: excellent (used), Year of construction: 2005, Manufacturer: Helmerding Presse Press force: 5,000 kN Stroke adjustment: 97–400 mm Strokes per minute: 10–80 1/min Tool installation height: 800 mm Ram adjustment: 200 mm Ram area: 3,000 x 1,400 mm Nlodpfx Agozlpm Io Ijh Table area: 3,000 x 1,400 mm Motor power: 90 kW Press weight: 120,000 kg Including transfer and coil line.

Condition: used, mileage: 60,204 km, power: 177 kW (240.65 HP), first registration: 07/1996, fuel type: diesel, overall weight: 12,600 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro2, Year of construction: 1996, Equipment: ABS, all wheel drive, M-Benz / Daimler 1224 4x4 TLF 16/25 Water Tank Fire Truck VIN 1K111555 Vehicle ID / 0100724 Chassis / Attachments: - Wheelbase: 3,600 mm - Leaf suspension - AP axle - Tyres: 10 R 22.5 - Remaining tread: Front approx. 80–90%, Rear approx. 90% - 1x diesel tank - 24V power socket at the front - 2x towing hooks, front and rear - Fixed trailer hitch, front and rear - Traction chains Cab: - 6-seater crew / double cab - 2x revolving beacons - 4x air horns - Hill-start assist - Electric mirrors / heated Body: - TLF 16/25 water tank fire truck Nlsdpfxjvc Nr Ae Ag Ioh - Ziegler centrifugal fire pump (322 operating hours) - 1,600 l/min flow capacity - 2,500 l water tank - 8 m suction height - 5x roller shutters (2 each side, 1 rear) Engine / Transmission: - 5,958 cc // 240 HP / 177 kW - Automatic (torque converter) - Retarder - Differential lock - PTO (power take-off) Weights: - GVW: 12,600 kg - Unladen weight: 8,640 kg - Payload: 3,960 kg Miscellaneous: - German vehicle - Municipal vehicle - New roadworthiness inspection (TÜV) available upon request New roadworthiness inspections (TÜV), safety inspections, de-registration/re-registration of weight are available upon request. We can assist you with obtaining export or transit plates and offer vehicle transport within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical errors, changes, prior sale, or mistakes. ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our core strength is the sale of new and used commercial vehicles. On 11,000 sqm we offer a wide range of vehicles. Our company philosophy is based on fairness and trustworthiness. Since customer satisfaction is very important to us, we offer our clients a comprehensive service package and a competent contact person who will assist them throughout the purchase or sale process. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organizing specialised transport We are happy to help you organise special transports. Temporary/export license plates We are happy to assist you in obtaining export license plates/temporary license plates. Customs documentation We are happy to assist you with customs procedures.

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Nljdpfsz Ih A Dsx Ag Ijh Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: used, functionality: fully functional, turning diameter over bed slide: 2,500 mm, total length: 3,750 mm, total width: 850 mm, total height: 1,350 mm, spindle speed (max.): 1,000 rpm, Global Nordic 25 lathe. Equipped with a three-jaw chuck, a four-jaw chuck, an eccentric four-jaw chuck, and various drills. 18 speeds. Hollow spindle, 78 mm. Speed n=rpm 12.5. Njdpfx Age Aa Iyge Ielh 400V.

Condition: good (used), Year of construction: 2014, operating hours: 5,898 h, lifting height: 4,950 mm, fuel type: electric, mast type: triplex, battery manufacturer: Eternity, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, Year of manufacture: 2014 Empty weight: 4.710 kg Lifting capacity: 2.500 kg Number of valves: 3 CE mark: yes Technical condition: good Visual appearance: good Mast type: triplex Nsdpfx Aoz I A S Tsg Islh = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - Free lift - Pneumatic shaped solids = More information = Number of valves: 3 Number of owners: 1 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: not inspected (used), Year of construction: 1995, travel distance X-axis: 650 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Mitsubishi, controller model: Meldas 50 M, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle nose: SK 40, Vertical Machining Center Manufacturer: LEADWELL Nlsdpozz S R Uefx Ag Ish Model: VMC 25 Year of manufacture: 1995 Control: Mitsubishi Meldas 50 M Technical specifications: - X-axis travel: 650 mm - Y-axis travel: 410 mm - Z-axis travel: 410 mm - Max. spindle speed: 6,000 rpm - Tool holder: SK 40 - Machine weight: approx. 4,200 kg - Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.