Used Hein Lr 812 H for sale (57,050)

Condition: used, - Dimensions LxWxH: 2150x1970x2730 mm - Model: LR-812-H - 2 trolleys: 800x600 Dkedsytc A Hspfx Al Aeu - 360 baguettes - Baking surface: 19.2 m² - Refractory stone system - Power: 5 kW - Voltage: 400V - Rotating rack convection oven with integrated heat recovery and heat distribution to the interior through refractory stone walls 1- Exhaust duct 2- Convection turbine 4- Rotating mechanism 5- High-performance steam generator 6- Suction wall 7- Suspended rotating rack(s) 8- Insulation 9- Rotating tray

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 trolleys: 800x600 mm - Baguette capacity: minimum 360 - Refractory stone (heat accumulator) - Integrated heat recovery unit - Baking surface: 19.2 m² - TOUCHMATIC touch screen control - Voltage: 400V - Power: 4 kW - Burner: Gas - ALL-IN-ONE = Rotary rack oven with integrated heat recovery unit - No additional trades required for installation - No electrical consumption by the heat recovery unit, as it is 100% mechanical - No need to connect to BMS (Building Management System)/central heating, no buffer tanks to store hot water - Automatic adjustment with no need for control, monitoring, or complex programming - Truly maintenance-free heat recovery unit - Heat recovery on each burner operating cycle - Long service life equal to that of the oven’s heat exchanger Dkjdsxxanpopfx Al Aeu - Primary energy consumption reduced by 20% (oil/gas) - Improved baking results due to faster achievement of target baking temperature after loading - Further primary energy savings thanks to shorter baking times - No downtimes (no reheating periods) for continuous baking - Heat remains where it is produced and needed: in the baking chamber, to bake your delicious products

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 racks: 800x600 mm - Serial number: 3002245 - Model: LR1-812H - Year: 01/2017 - Baguette capacity: minimum 360 - Baking surface: 19.2 m² - TOUCHMATIC touchscreen control panel - Voltage: 400V - Power: 5 kW Dkjdpfx Aow Enwzol Aeu Ndsy Tdjw Enwzjxugsa - Burner: Gas - Maximum baking surface with minimal footprint, compact and robust construction - Significant increase in productivity - The right choice for a wide range of requirements - The impressive dimensions of HEINLUXROTOR rotary ovens (baking surface relative to floor space) are made possible by the integration of the burner in the upper section and an optimized airflow design.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 359 g, mold height (min.): 250 mm, plate length: 695 mm, plate width: 695 mm, total length: 5,205 mm, total width: 1,670 mm, total height: 2,200 mm, overall weight: 6,500 kg, Clamping force: 150 t Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Opening stroke: 400 mm Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Dkjdpfxjz Iz Exe Al Aju Accumulator Frequency converter Hidrive drive 4 x pneumatic valve

Condition: good (used), Year of construction: 2016, cutting diameter 300 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 300 x 280 mm capacity 45 degrees: round re 300 mm capacity 60 degrees: flat re 190 x 200 mm capacity 60 degrees: round re 200 mm capacity 45 degrees: flat li 270 x 200 mm capacity 45 degrees: round li 270 mm turning speed range: 20 - 100 m/min saw band length 3660 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 650 kg range L-W-H 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable * For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping - Ergonomic control panelâ??front right, swiveling - Coolant system - Operatoration manual Dsdpszv Ul Dsfx Al Aoku * Semi-automatic work cycle: After the cycle starts, the vise closes automatically, the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: good (used), Year of construction: 2011, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 240 x 150 mm capacity 45 degrees: round re 240 mm capacity 60 degrees: flat re 150 x 180 mm capacity 60 degrees: round re 150 mm capacity 45 degrees: flat li 240 x 100 mm capacity 45 degrees: round li 240 mm turning speed range: 20 - 100 m/min Dsdpfx Aszv Ulwjl Ajku saw band length 3100 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 570 kg range L-W-H 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table * For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model "F") - Ergonomic control panel - Micro-spray lubrication system (spray oiler) - 2x PEGAS roller conveyor - Operating instructions in German * Semi-automatic work cycle: After the cycle starts, the vise closes automatically; the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel ranges x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410 ENGLISH: Dkodpfx Alez Dun Es Aeu Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel paths x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Dkodpfx Aljzl Tc Tj Aeu Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 90465555, Year of construction: 2015, operating hours: 5,124 h, load capacity: 1,400 kg, lifting height: 5,350 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, power: 1.6 kW (2.18 HP), motor manufacturer: Jungheinrich, gearing type: automatic, battery manufacturer: Triathlon, battery model: 3 PzS 375 Bj. KW06/2026, battery capacity: 375 Ah, battery voltage: 24 V, battery weight: 288 kg, DGUV certified until: 07/2027, fork length: 1,150 mm, overall weight: 1,321 kg, empty load weight: 1,033 kg, total height: 2,250 mm, color: yellow, Equipment: CE marking, UVV, Price: €7,500 net €8,925 gross SKU: 710 Basic information: - Manufacturer: Jungheinrich - Model: EJC 214 - Year of manufacture: 2015 - Operating hours: 5124 h Technical data: - Battery: 24V 3 PzS 375 Ah (Year of manufacture: week 06/2026) NEW - Charger: integrated Lifting equipment / Dimensions: - Overall height: 2250 mm - Mast type: Triplex mast - Lifting height: 5350 mm - Free lift: 1700 mm - Fork length: 1150 mm - Rated load capacity: 1400 kg - Load center: 600 mm - Initial lift: No - Rated load capacity initial lift: Tires: - Type: Solid tires Equipment: - Scale: No - Creep function: Yes - Proportional lift: Yes Extras: - UVV inspection can be carried out on request - Immediately ready for use - Inspection and test drive possible on-site by appointment. Transport: Cost-effective shipping available on request. Invoice with VAT: You will always receive an invoice with VAT shown. Battery: We can also provide you with a quote including a new battery. Dkodpfxszk Il He Al Aeu Contact: If you have any questions or are interested, please contact us by phone, email or via the contact form. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,800 h, overall weight: 27 kg, load capacity: 7 kg, arm reach: 911 mm, controller manufacturer: FANUC, controller model: R-30iB Mate, number of axes: 6, This 6-axis FANUC LR Mate 200iD/7L auf Bosch APAS assistant i6 was manufactured in 2015. It features a mobile base unit, a FANUC System R-30iB Mate control unit, and a custom-built pneumatic gripper. With 3,800 operating hours, this collaborative robot offers versatile automation capabilities. If you are looking to get high-quality automation capabilities, consider the FANUC LR Mate 200iD/7L collaborative robot we have for sale. Contact us for further details. Dkjdpfx Ajzq Af Ujl Asu - Main Components: Mobile base unit Bosch APAS assistant i6 (on wheels), OpCon control panel, Robot arm FANUC LR Mate 200iD/7L, Control unit FANUC System R-30iB Mate, Teach pendant (handheld programming device)- Peripherals & Additional Modules: Pneumatic module (Festo), Pneumatic gripper (custom-built), Protective covers and mounting frame (APAS-specific)- Operating Hours: 3,800 h- Main Circuit Voltage: 1/N/PE 230V AC 50Hz- Control Circuit Voltage: 24V DC- Full Load / Short Circuit Current: 3.5A / 10kA- Min. Supply Line: 3 x 2.5 mm²- Max. Backup Fuse: 16A gG- Protection Rating: IP52- Robot Weight: 27 kg- Notes: Backup battery is dead

Year of construction: 2017, condition: excellent (used), machine/vehicle number: 26616, Equipment: CE marking, The Hapa 237-Hybrid is a modular UV printing system that combines the cost-effective features of flexographic technology with the full flexibility of digital drop-on-demand printing. The system is a standard solution from HAPA, designed for printing onto aluminum foil for blister machines. In its current configuration, the system is installed on a separate stand with a dedicated unwinder to enable inline printing with a blister machine. The system can be reconfigured for top-mounting or roll-to-roll operation at an additional cost. Utilizing UV-cured inks, it is ideally suited for pharmaceutical applications. Installation and validation can be provided by PPS. KEY ADVANTAGES • Award-winning HMI, also available as a software version for integration into the host packaging machine interface. • Fully compatible with camera inspection systems. • Digital integration and system automation control via OPC UA. • Supports black and Pantone spot colors. • High speed, up to 35 meters per minute. • Ozone-free UV curing technology. • Format-free operation. • Automatic printhead cleaning system (DOD). • Simple and accurate print plate mounting (Flexo) using location pins, eliminating the need for adhesive tape. • Easy to handle, quick-change inking devices (Flexo). Detailed Information: Footprint: Machine depth (mm): 1387 Machine height (mm): 2281 Machine length (mm): 1020 Machine weight (kg): 1075 Dkjdpfx Aeyr Imbsl Aeu Other Technical Features: Technological Application: Blisters, Deep-draw blisters, Trays, Pouches Substrates: Aluminum foil, Paper-backed foil, Paper, PVC, Tyvek Technical Data: Max. advance length (mm): 350 Max. printing width (mm): 298 Max. web width (mm): 310 Min. advance length (mm): 90 Min. web width (mm): 70 Resolution (dpi): 360 Max. printing speed (m/min): 35

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Dkjdpfx Asyab R Nel Aeu Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Robot WITTMANN W818-2558 (2013)

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, load capacity: 3,600 kg, total height: 2,000 mm, total length: 2,350 mm, total width: 1,700 mm, type of input current: three-phase, table width: 1,050 mm, overall weight: 2,200 kg, table load: 3,600 kg, pivoting range: 135 °, table length: 1,050 mm, workpiece weight (max.): 3,600 kg, input voltage: 400 V, input current: 16 A, plate diameter: 1,050 mm, Equipment: foot remote control, Remote control, table speed adjustment on the control box housing, other data on the plates below. The tilt motor has been refurbished, and the wiring has been replaced. It has two ways to operate the table: via remote control and via a foot switch. Dksdpfx Asz Hlgwel Aou

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 2 VON HEIN 160 pipe saws Year of manufacture: 1995 and 1996 With chipping jaws Application: Cutting and chamfering Smallest diameter: 30 mm Largest diameter: 160 mm For PE, PP, and PVC pipes Also suitable for short lengths from 10 mm Condition: Very good, the pipe saws are ready for use The saws are my property Dkjdpfx Aeyxqlnjl Aeu Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany

Condition: good (used), Year of construction: 2011, machine/vehicle number: A05B-2551-B280, Fanuc LR mate in very good condition. It was removed from an injection moulding process where it loaded the the plastic blanks prior to forming and was only in production for 5 yrs. it comes with the robust R30iA controller which has ethernet connectivity to connect to your PLC or can be configured to work as a stand alone unit Dedetiy Sgepfx Al Ajku

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Dodjy Nfqmspfx Al Aeku Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), * Brand: Hein Lehmann Dkedpeyxpbzsfx Al Aeu * Type: flip/flop * On stock: 1 piece * 1x Surface: 5000 x 1000mm - 1 Decks * Driving: 7,5 kW E-Motor * Incl.: construction

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 10 h, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, cutting width (max.): 280 mm, control type: PLC-controlled, roller diameter: 260 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 100 rpm, total height: 1,780 mm, total length: 1,900 mm, total width: 1,050 mm, overall weight: 420 kg, table height: 795 mm, year of last overhaul: 2026, saw band length: 2,970 mm, saw blade speed: 100 rpm, saw blade width: 27 mm, number of digital displays: 1, Equipment: CE marking, cooling unit, documentation/manual, motor brake, rotational speed infinitely variable, PEGAS 260×280 SHI-LR Semi-Automatic Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ Machine sold directly by the manufacturer ✓ 6-month warranty ✓ Service and spare parts provided by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty cast iron construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 255 mm Maximum cutting capacity (rectangular): 280 × 250 mm Continuously adjustable mitre cutting: 60° right to 45° left Semi-automatic hydraulic operation Variable blade speed: 20–100 m/min Motor power: 1.5 kW Saw blade dimensions: 2720 × 27 × 0.9 mm Hydraulic material clamping vice Hydraulic saw head feed and return Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 420 kg Built for Daily Industrial Use The PEGAS 260×280 SHI-LR is a semi-automatic band saw designed for both single-piece and small-batch production. The machine is suitable for straight and mitre cutting of structural steel, stainless steel, tool steel, solid bars and profiles. Angle cutting is continuously adjustable from 60° to the right and 45° to the left. All major load-bearing components are manufactured from high-quality cast iron, providing exceptional rigidity, vibration damping, high cutting accuracy and a long service life. The saw head is inclined at 25°, reducing blade wear and extending blade life. The hydraulic semi-automatic cycle controls material clamping, cutting, saw head return and vice opening, while material loading is performed manually. Feed pressure and cutting feed rate are easily adjustable for optimum cutting performance. Inspection and Test Run Dksdszhm Eajpfx Al Aou The machine can be inspected and tested under working conditions at the manufacturer's premises in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine and answer any questions you may have.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 10 h, power: 1.4 kW (1.90 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 230 mm, cutting width (max.): 280 mm, control type: manual, roller diameter: 50 mm, pivoting range: 60 °, actuation type: hydraulic, rotational speed (max.): 35 rpm, rotational speed (min.): 70 rpm, total height: 1,950 mm, total length: 1,600 mm, total width: 890 mm, overall weight: 305 kg, table height: 787 mm, year of last overhaul: 2026, saw blade length: 2,720 mm, saw blade width: 27 mm, type of cooling: water, Equipment: CE marking, documentation/manual, saw blade guard, PEGAS 230x280 GH-LR Gravity Band Saw – Robust Czech-Made Metal Cutting Machine PEGAS 230x280 GH-LR is a high-quality gravity-operated band saw designed for accurate straight and mitre cutting in workshops, maintenance departments and small-series production. The saw combines a robust cast iron construction with reliable hydraulic feed control, ensuring precise cuts and long service life. Main features Cutting capacity: Ø230 mm / 280 × 220 mm Mitre cutting: 0° to +60° right and 0° to -45° left Gravity feed with hydraulic downfeed control Heavy-duty cast iron saw bow, vice and swivel table Manual quick-clamping vice Two blade speeds: 35 / 70 m/min Blade size: 2720 × 27 × 0.9 mm Coolant system included Automatic stop at the end of the cut Mechanical blade tensioning with tension indicator Carbide blade guides with guide bearings 400 V, 0.75 / 1.1 kW motor Machine weight: approx. 305 kg Suitable for Structural steel Stainless steel Tool steel Solid bars, tubes and profiles Workshop production and small batch manufacturing The PEGAS 230x280 GH-LR is known for its durable construction, accurate cutting performance and easy operation, making it an excellent choice for professional metalworking applications. Condition: Excellent Voltage: 3×400 V Available immediately Machine can be inspected under power CE documentation available Dkodpfx Alezhm Als Aju Location: Czech Republic

Condition: ready for operation (used), * Brand: Hein Lehmann * Type: LS 1.5-32 DD * Year of manufacture: 1998 - Overhauled in 2019 * Surface : 7600 x 1500mm - 2 decks Dodpeywmgfofx Al Aoku * Driving: 45 kW E-motor * Weight: 12 Tons.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 10 h, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 56 mm, pivoting range: 60 °, actuation type: hydraulic, rotational speed (max.): 100 rpm, rotational speed (min.): 20 rpm, total height: 2,340 mm, total length: 3,000 mm, total width: 1,080 mm, overall weight: 740 kg, table height: 812 mm, year of last overhaul: 2026, saw blade length: 4,780 mm, saw blade speed: 100 rpm, saw blade width: 34 mm, type of cooling: water, Equipment: CE marking, documentation/manual, motor brake, rotational speed infinitely variable, PEGAS 360×500 SHI-LR Semi-Automatic Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ 6-month warranty ✓ Service and spare parts provided directly by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty industrial construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 360 mm Maximum cutting capacity (rectangular): 500 × 350 mm Continuously adjustable mitre cutting: 60° right to 60° left Djdpfjzhm Rcjx Al Aoku Semi-automatic hydraulic operation Variable blade speed: 20–100 m/min Total motor power: 3.0 kW Saw blade dimensions: 4780 × 34 × 1.1 mm Hydraulic material clamping vice Hydraulic saw head feed and return Automatic blade load control (PEGAS BRP) Mitsubishi PLC control with touch-screen display Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 740 kg Manufacturer's Showroom Machine We are the manufacturer of PEGAS band saws, and this machine has been used exclusively as our showroom demonstration unit. It has been professionally serviced by our own technicians, carefully maintained, and kept in excellent working condition. The machine is now available for sale as part of our showroom renewal programme. This is an excellent opportunity to purchase a manufacturer-maintained demonstration machine at an attractive price. Built for Demanding Industrial Production The PEGAS 360×500 SHI-LR is a heavy-duty semi-automatic horizontal band saw designed for daily industrial operation, piece production and small- to medium-batch manufacturing. It is suitable for cutting structural steel, stainless steel, tool steel, solid bars, tubes and profiles with high accuracy and reliability. The robust welded saw frame and heavy-duty construction provide exceptional rigidity, vibration damping and long service life even under intensive production conditions. The saw head is mounted in preloaded guide bushings with low-friction surfaces, ensuring precise and smooth operation. The blade speed is continuously adjustable from 20 to 100 m/min via a frequency inverter, allowing optimum cutting performance for a wide range of materials. The hydraulic semi-automatic cycle automatically performs material clamping, cutting, saw head return and vice opening, while loading and unloading of material remain manual. The integrated PEGAS BRP blade load control continuously monitors cutting load and optimizes the feed, protecting the saw blade and increasing productivity. The Mitsubishi PLC control system with touch-screen display provides clear machine diagnostics, cutting parameters and operating information. Inspection and Test Run The machine can be inspected and tested under working conditions at our manufacturing facility in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine, answer any questions, and provide additional information.

Condition: used, power: 67 kW (91.09 HP), next inspection (TÜV): 02/2027, Year of construction: 2005, operating hours: 9,560 h, Equipment: air conditioning, all wheel drive, cabin, German tractor, in use until recently. Second owner, both times government park administration: from 2005 to 2017, and from 2017 to 2026. All-wheel drive. 4-cylinder turbo diesel engine with 4485 cc and 91 hp. Large 24-speed Hi-LO transmission, 4 gears in 3 ranges, 2 powershift stages, and powershift reverser. 40 km/h maximum speed. Air brake system. Comfort cabin with air-suspended driver's seat and air conditioning. Rear PTO with 3 speeds (540/750/1000 rpm). Category II rear hitch with quick couplers and auxiliary lift cylinders (5060 kg capacity). Dkjdpfx Ajy Ean Sjl Aju Quick-adjustable height towing hitch. 2 mechanical control units (switchable between single- and double-acting). Front PTO and front hydraulics were retrofitted to the new tractor in 2005. Unladen weight: 4,250 kg. Permissible total weight: 6,200 kg. Registration as "LOF agricultural tractor". Transport dimensions: length 4.36 m / width 2.29 m / height 2.64 m. Front tires: 360/80R24. Rear tires: 440/80R34. All tires are in good condition. According to the vehicle registration supplement, various alternative tire combinations are permitted. The tractor is operational; deregistration scheduled for 16.04.2026. Inspection (TÜV) valid until 02/2027. This offer is only valid for commercial businesses, farmers, foresters, and similar self-employed individuals. Secondary occupation is sufficient. The offer is also valid for government agencies. Sale to private end consumers is strictly excluded. Subject to prior sale and possible errors. Net price: €20,900.

Condition: ready for operation (used), A Daiß + Partner CNC automatic band saw with a double-miter twin-column design is offered. Cutting capacity X/Y: 500mm/320mm, saw blade dimensions: 4700mm/34mm/1.1mm, feed length: 2000mm, rapid traverse: approx. 12m/min, blade speed: 15-105m/min, CNC control: PS 210. Equipment: powered chip brush, Power-Box hydraulic cutting pressure adjustment, Micro-Cooler coolant spray system, hydraulic saw blade tensioning and saw blade breakage monitoring. An on-site inspection is possible. Djdpoznc N Uefx Al Aoku

Condition: good (used), Year of construction: 1975, machine/vehicle number: D 201238, Offer 17230 Technical data: - Load capacity 3600 kg - Faceplate diameter approx. 1050 x 1050 mm - Faceplate motorized, swiveling + rotating - Faceplate speed electrically infinitely adjustable 0.2 - 1 rpm - Motorized right + left rotation - Hand remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm Djdpsv Hbzkjfx Al Ajku - Space requirement approx. W 1650 x H 1550 x D 2400 mm - Weight approx. 3500 kg - Hand remote control

Condition: used, Year of construction: 2016, operating hours: 3,953 h, lifting height: 5,720 mm, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich ETV C16 reach truck, year of manufacture: 2016, battery: 2016, hours: 2,953 h!, previous owner: German Armed Forces, rated load capacity: 1,600 kg, lifting height: 5,720 mm, fork length: 1,000 mm, side shifter, triplex mast with free lift, including charger, overall height: 2,400 mm, good condition!, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! Rental possible. = Further information = Lifting capacity: 1,600 kg Overall height: 245 cm Dkedpfx Aloz Nu Aue Aeu Please contact Tobias Ebert for further information.