Used Hebrock Hff 08 for sale (4,507)

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Gsdpfx Ajq H Spvjf Seiw Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: good (used), Year of construction: 2003, I sell the radius milling machine HEBROCK HFF08, Year 2003. Suitable for curved shaped edges Godpewun H Uefx Af Seiw Good condition, possible to test ! Possible to buy also the Radius edge banding machine AKV88D.

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius milling machine HFF08. Gedpfx Afovx D Auo Ssiw

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Giodpezf Ircsfx Af Sjw Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel dividing/milling units: 1 Number of edge processing units: 4 Adhesive system: EVA hot melt adhesive The machine consists of the following processing units: Panel dividing/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Capping Number of motors: 1 Edge processing unit 2 Giodozf Id Sjpfx Af Sew Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Overpressure Pressure with idler rollers Panel support guides Edge roller magazine Adhesive pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2013, Gluing, edge trimming, combination milling, flat pull blade, max. edge thickness: 3/8 mm, max. workpiece height: approx. 40/50 mm, min. workpiece length: approx. 250/300 mm, min. workpiece width: approx. 70 mm, feed rate: approx. 10 m/min, ready for operation: approx. 6 min, power consumption: 6.5 kW, drive system, working height: 880 mm, dimensions: 3600 x 1300 x 1500 mm, weight: approx. 660 kg. Giodozcw Amjpfx Af Sjw Storage location: Supplier.

Condition: new, Year of construction: 2025, The Hebrock F 5 Godpfx Afjlht Hws Sjiw If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius trimming blade, corner milling cutter, surface trimming blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius trimming blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation incl. glue outlet device, HF miter saw station (approx. 12000 rpm), HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and replaceable blade milling cutter (combination version), corner rounding cutter, radius trimming blade, surface trimming blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 quick-change preparation for corner milling cutter F5/08/5 additional replacement motor for corner milling cutter with tool set F5/09/4 multi-radius trimming blade (R1/R2) F5/24/1 spray device for release agent F5/24/2 spray device for cleaning agent F5/25 spray device for edge F5/27 nesting for milling cutter and radius trimming blade F5/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: Available from stock in 54634 Bitburg - available in week 4 -

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Gedolht Hzspfx Af Seiw F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Gijdpfx Afsi Am U Ds Ssw F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: new, Year of construction: 2025, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Gsdohqadcspfx Af Soiw Transport chain with permanently screwed-on special chain plates Edge router Routing unit Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: excellent (used), Year of construction: 2000, Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2000 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Gsdozbyvajpfx Af Seiw Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock K 36 Top model with motorized adjustment - showroom model - new machine - - immediately available - This popular Hebrock model offers unparalleled possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By providing the option to equip the machine with a stepped milling cutter and a multi-radius draw knife, Hebrock sets new standards in the field of perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 minutes. Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed rate: approx. 15 m/min. Ready for operation: approx. 6 min. Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3-phase – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; edge trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue reservoir with replaceable reservoir preparation incl. glue outlet device, high-frequency double-motor trimming saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable milling cutter (combination version), corner rounding cutter, radius draw knife, flat draw knife (incl. pneumatic retracting device), finishing station, robust chain drive, ball-bearing double roller pressure, aggregate sight window from the rear of the machine and the operator side, signal lamp for workpiece sequence, extendable workpiece support, feed rate approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius draw knife 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25. Protective spray for edge Gedji Am Ukepfx Af Sjiw 36/27 Nesting (1 milling station + 1 radius draw knife) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package with motorized adjustment for panel, edge thickness and rabbet milling depth Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius scraper blade, corner cutter, surface scraper blade, finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Giedpfei Anadex Af Sow Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue outlet device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combined version), corner rounding cutter, radius scraper blade, surface scraper blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius scraper blade F5/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: In stock, 54634 Bitburg Available in calendar week: 4/2024

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption approx. 11 kW With quick-heating glue reservoir Pneumatic edge trimming up to 3 mm With cross-cut saw for edge thickness up to 5 mm With milling station, optionally equipped with combined reversible blade cutters for radius, straight and chamfer milling Giodpfszk N Ebox Af Sew Outrigger, foldable and extendable to the front With chassis L x W x H: 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper Gsdpfxsymyp Rj Af Sjiw - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Gsdpoxyiilofx Af Ssiw

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: Used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, with additional equipment (detailed below). First owner. Overhauled last year (belt and drive rollers replaced, glue pot regenerated). The edge banding machine operated on one shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and the ability to operate in continuous mode. Price: 85,000 PLN net. Excellent condition - the machine is in full working order, regularly serviced, and ready for operation without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by prior appointment in Borów (83-332). Please contact us by phone for additional information, as well as videos and pictures of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA), polyurethane (PUR) glues, and zero-joint systems. - Edge dimensions: Edge banding from 0.4 to 3 mm thick on components from 10 to 60 mm thick. - Power supply and power: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Aggregates: Equipped with a scraper, chamfering cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic edge alignment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: Narrow band edge banding machine from the German company Hebrock with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick on components from 10 to 60 mm thick, as well as pre-milling the panel with diamond cutters. The machine is optimally equipped for each type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual aggregates. The patented Hebrock system in the edge milling aggregates (consisting of adjusting the lower and upper cutter from outside the machine – during operation), as well as the automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendly operation. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max. edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 kW motor • Glue heating time: 6 min Giodpfx Aezizabsf Sew • Total power consumption: max. 14 kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Extraction nozzle diameter: ø 140 mm, • Required extraction performance: 24 m3/min • Min. air velocity in the extraction nozzle: 20 m/s • Required vacuum in the extraction nozzle: 1300 Pa

Condition: excellent (used), Year of construction: 1999, Technical specifications: • Manufacturer: Hebrock GmbH (Made in Germany) • Model: EURO 2000 • Year of manufacture: 1999 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Giodey Ahtwepfx Af Ssw Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption approx. 11 kW Gsdpfjx Rr Dvjx Af Soiw With quick-heating glue reservoir Pneumatic edge trimming up to 3 mm With cross-cut saw for edge thickness up to 5 mm With milling station, optionally equipped with combined reversible blade cutters for radius, straight and chamfer milling Outrigger, foldable and extendable to the front With chassis L x W x H: 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Hebrock EURO 2000 Edge Banding Machine – fully overhauled, ready for immediate use For sale is a highly reliable and robust edge banding machine manufactured in Germany. The machine has been technically refurbished and is immediately operational – ideal for joineries looking for a solid solution without investing in new equipment. Radius and chamfer adjustment pneumatic. The machine can be tested on site. Condition / Work carried out: - All pneumatic hoses replaced - 2 main cylinders new - Machine thoroughly cleaned - Technically inspected and ready for operation Technical specifications: - Manufacturer: Hebrock GmbH (Made in Germany) - Model: EURO 2000 - Year of manufacture: 2001 - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 7 kW - Rated current: 13.6 A Giodpfxsy Nd H Ho Af Sew Working range: - Workpiece thickness: approx. 10 – 50 mm - Edge thickness: approx. 0.5 – 3 mm - Minimum workpiece length: approx. 250 mm - Minimum workpiece width: approx. 70 mm - Feed speed: approx. 10 m/min - Compressed air connection required (approx. 6–7 bar) Delivery within a 150 km radius available for an additional charge. As we are currently receiving new machines and storage space is limited, we have adjusted the price.

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm Giodpfx Afsy Id Nle Sjw - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station Gijdpezhrduofx Af Sew - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Gsdsx S Hmzjpfx Af Seiw Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: used, Year of construction: 2000, total height: 1,600 mm, total length: 4,300 mm, total width: 840 mm, Colour: Grey - Details: - └ Description: The machine needs to be repaired - Year: 2000 - Documentation available: No - CE certificate present: No - Serial number: 404 - Number of units [pcs]: 6 - └ 1st unit type: Glue unit - - Tools available: Yes - └ 2nd unit type: Pressure rollers - └ 3rd unit type: Cap unit - - Tools available: Yes Giodpsykafaefx Af Sow - └ 4th unit type: Corner rounding unit - - Tools available: Yes - └ 5th unit type: Radius scraping unit - - Tools available: Yes - └ 6th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 15.8 - Power [kW]: 10.2 - Transport dimensions: 4300mm x 840mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support Gisdpfx Aozb Idfof Sjw ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.