Used Heater & Blower for sale (5,552)

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm - 1 pc. Y-piece with gasket, 45°, length 800mm Ncodsxv Akzjpfx Afasr - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1,800 kW (2,447.32 HP), Available directly from stock: 1700kW load bank for fixed installation. 400volt/50hz 6 steps of +/- 250kW 2 steps of +/- 125kW Other steps possible in consultation External control power supply 64Amp/400v/50hz Control via Modbus and HMI in the cabinet Equipped with its own circuit breaker in the casing. Can be extended with a motor. Njdpfx Afouubctjaecr 20Ft container

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Year: 2007 Output: 1200Kw Nedpfsnr Ek Uex Afaocr Burner: Weishaupt oil or gas burner on request

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 700 kW (951.73 HP), overall weight: 5,000 kg, total width: 2,438 mm, total length: 6,058 mm, total height: 2,591 mm, heating capacity: 700 kW (951.73 HP), oil tank capacity: 2,000 l, Description: For sale is a high-quality heating container, ideal for larger heating projects or temporary use in industrial or commercial facilities. The container is equipped with: Boiler: Viessmann Vitoplex 200 with an output of 700 kW - known for its efficiency and durability. Burner: Riello RL 70 TC forced draught oil burner with an output range of 255/474 to 830 kW, type 660 T1 - reliable and powerful. Hydraulic separator - for optimum temperature control and heat exchanger function. Oil tank: 2000 liters - sufficient capacity for a longer operating time. Remote monitoring system: The heating container is equipped with a modern remote monitoring system that makes it possible to monitor operating statuses and performance data remotely at any time and react quickly if necessary. The heating container is ready for immediate use and has been regularly serviced. It is particularly suitable for use on construction sites, for temporary heat supply or as additional heating for larger systems. Year of construction: 2023 Nsdeuh Hi Repfx Afaocr There are 2 containers for sale (individual price €100,000) Available immediately If required, the container can also be delivered and connected. This will be done at cost or on quotation.

Condition: refurbished (used), total width: 1,600 mm, total length: 3,500 mm, Insertion Length 3500mm Width inside 1600mm Ncjderp Dmiopfx Afaor Vk 12000€ Completely refurbished Cutting edges renewed Scraper bars very good Incl. cylinder Only for installation

Condition: refurbished (used), Year of construction: 2008, power: 90 kW (122.37 HP), This would be the fan / blower 90 KW , BJ 08 Completely overhauled, ready for use. Ncodperp Dlwefx Afajr VK 8000€ net

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. Ncjdpfx Afsyznu Seaer 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Contact our team for details and price.

Condition: not inspected (used), functionality: unexamined, overall weight: 300 kg, total length: 1,500 mm, total width: 600 mm, total height: 1,300 mm, working length: 500 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates collection within the specified period from 04.05.26 to 07.05.26. Ncodpfsyr Rb Iox Afasr TECHNICAL DETAILS Working length: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 600 x 1,300 mm Weight: 300 kg Engine: BRIGGS & STRATTON petrol engine External reference: 91

Condition: used, Delta blower Aerzen blower Type: GM7L Motor power: 5.5 kW Year of manufacture: 2020 Njdpeyt Rhdofx Afascr Equipped with frequency inverter

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, - a cap dispenser, - laminar flow, - spare parts, - belt conveyor 2200mm x 40mm, sold without peristaltic pump. Ncedpfx Afertnlajaer YOM 2010 EXCELLENT CONDITION

Condition: used, Aerzen Blower GMA 11.4 Nodpfowq Sx Hsx Afaecr Power: 10kw RPM: 2300 Capacity: 420m3/h Pressure: 1 bar Diameter inlet: 100mm Diameter outlet: 100mm Approx Dimensions: 1300mm X 800mm X 1100mm

Condition: used, Aerzen Blower GMA 11.4 Ncodpfx Ajwq Sydefaer Complete with ancillary equipment

Condition: new, Boiler with feeder Ahena 250KW Solid/dry fuel boiler Ncedpfx Aoy E Sdrsfajr Output: 250 kW Capacity: 1100 litres Year of manufacture: 2016 CE certificate Brand new boiler, never installed

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower Ncodog N Dhwjpfx Afaor -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Connection: Input 600x1220 mm -Connection: Output 680x680 mm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: excellent (used), For sale is a high-quality Milwaukee M18 F2SSBL FUEL cordless snow blower, offered as a showroom model in excellent condition. - The unit was used for in-store display only – no heavy winter operation! - Important: Delivery does NOT include battery or charger (ideal for those already using the Milwaukee M18 system) Highlights: - Powerful brushless POWERSTATE™ motor - Part of the Milwaukee M18 FUEL system (100% compatible) - Clearing width approx. 53 cm – ideal for sidewalks and driveways - Clearing height approx. 30 cm – suitable for deep snow - Throwing distance up to approx. 10 m - Adjustable discharge chute for maximum control - LED headlight for perfect visibility in the dark - Clog-resistant design – no need for tedious post-cleaning - Space-saving vertical storage Advantages: - Quieter and lower maintenance than petrol snow blowers - Zero emissions during operation - Instant full power – no starting procedure like with petrol engines - Perfect for homeowners, janitors & commercial use Scope of delivery: - Milwaukee M18 F2SSBL snow blower - WITHOUT battery & charger Ncedpfeyvhqisx Afasr - Original packaging The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Freight shipment: Austria: €60.00 incl. VAT Germany: €90.00 incl. VAT Related keywords: snow blower, cordless snow blower, Milwaukee M18, snow remover, snow thrower, winter service, driveway clearing, sidewalk snow, janitor equipment, professional snow blower

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower Ncjdjwnccqspfx Afajr -Manufacturer: Elektror, pressure blower radial fan type RD 92 -Drive: 15 kW -Speed: 2950 rpm -Volume flow rate: 7500 m³/h -Pressure: 8300 Pa -Inlet connection: Ø 220 mm -Outlet connection: Ø 220 mm -Protection class: IP 54 -Fan wheel: Ø 720 x 60 mm Quantity: 1 piece available -Dimensions: 960/910/H1075 mm -Weight: 210 kg

Condition: used, 20 ft Containerised Water Heater (Kerosene fuel) Used to provide hot water for 33 bedroom and 2 kitchen venue whilst works undertaken for new integral boiler/plant room. 2 x 150kw output boilers Nedpfxjyhzawe Afaocr Currently decommissioned but can be recommissioned for demonstration with deposit payment. Buyer to collect only and prepare for collection. Ready for immediate collection. Located in Lincolnshire. Offers considered. Viewings available by prearranged appointment. Any questions, please ask.

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Make: DMUK Capacity: 1000-1000 L/h Nsdpoy E H Eqefx Afajcr Temperatures: Regulated by the controls Circulation Pump: Included Control Panel: Included VDF: Included Condition: Excellent

Condition: used, Year of construction: 2017, functionality: fully functional, Air volume: 6.300 m³/h Nodey Dth Ajpfx Afascr Air velocity: 1,94 m/s Isolation: 50 mm Filter M5 and F7 ventilator active power: 2.840 kW Heaters - temp. Air inlet / outlet: -12 / 22 °C Coolers - temp. Air inlet / outlet: 32 / 20 °C dimensions (LxWxH): 3.900 x 1.050 x 1.050 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Nedpfx Aeqvlvmsfaocr Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low-noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Ncsdpfx Afsqvlw Ijasr Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Njdpfx Aoqvlu Eofascr Clean combustion - no chimney required very economical - fuel consumption approx. 2.5 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. Ncodpsvu Ad Aofx Afaer The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Precision and Performance The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Standard Equipment powder-coated steel housing 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Adjustable extraction for lathes with a wheeled base, ensuring effective extraction of dust and chips. The set includes a 56-liter chip bag and a 230 x 125 mm connector. The perfect choice for professional turners and hobbyists, ensuring a clean and safe workshop. Product characteristics: The sawdust extractor for wood lathes is a reliable tool that guarantees effective extraction of dust and chips when processing materials. Its main feature is the adjustable nozzle, which allows you to precisely adjust the suction to specific needs and working conditions. This allows you to effectively keep the area around the lathe clean, eliminating potential health and safety hazards. The extractor is equipped with a solid base with wheels, which allows it to be easily moved and placed in different places in the workshop. Regardless of whether the machine is used in a fixed location or requires frequent relocation, the extractor will certainly meet your expectations in terms of mobility and comfort of use. The scope of delivery of the extractor includes a chip bag with a diameter of 380 mm and a length of 530 mm, with a capacity of 56 liters. Thanks to the large capacity of the bag, you can easily work for a long time without having to empty it frequently. Additionally, the set includes an extraction stub with dimensions of 230 mm (length) by 125 mm (height), which ensures reliable and effective connection of the extraction device to the lathe. No matter whether you are a professional turner or a hobbyist, a lathe extraction device with an adjustable spigot and a mobile base will certainly help you keep your workshop clean and ensure safe working conditions. This extract will also work: Planers Planners Thickness gauges Milling machines Nedpfjvu Aprex Afaecr Banding machines Format saws Technical data ENGINE POWER 0.75kW TENSION 230V / 50Hz WASTE BAG CAPACITY 56 years old SUCCATION PERFORMANCE 1000 m3/h SUCTION PIPE DIAMETER 100 mm FAN DIAMETER 230 mm VACUUM 1030 Pa SOUND PRESSURE LEVEL

Condition: new, functionality: fully functional, Year of construction: 2026, The FM300SN transport fan is a technologically advanced unit designed for extracting sawdust, wood chips, and wood dust in industrial environments. With a 2.2 kW motor and an airflow capacity of 3900 m³/h, the unit performs exceptionally well as a sawdust blower in dust extraction systems, ensuring effective air filtration and purification directly at the source of contamination. Its reliability, high performance, and compatibility with various woodworking machines make it an ideal choice for professional wood processing facilities. Key Advantages 2.2 kW motor – designed for intensive continuous operation High extraction capacity of 3900 m³/h – efficient removal of sawdust, chips, and dust Impeller speed 2950 rpm – optimal airflow with stable operation Universal suction ports – 1 × 150 mm and 3 × 100 mm for connecting multiple machines simultaneously Steel construction – resistant to mechanical damage and adapted for industrial conditions Design and Technology The FM300SN is based on a welded construction made of thick, powder-coated steel, ensuring resistance to impacts, vibration, and heavy-duty use. The aluminum impeller is mounted directly on the motor shaft, providing high efficiency and minimal energy loss. The fan is designed for three-phase 400 V / 50 Hz power supply, ensuring stable operation in industrial facilities without the risk of system overload. Nodpfjvu Amkox Afascr The suction port system (3 × 100 mm and 1 × 150 mm) allows multiple machines to be connected simultaneously or enables the use of reducers depending on the dust extraction system requirements. Precision and Performance The FM300SN stands out for its high efficiency in transporting sawdust and dust, even in heavily contaminated environments. Carefully optimized aerodynamic parameters ensure constant airflow, minimizing the risk of blockages within the system. As a result, the fan not only maintains a clean working environment but also extends the service life of connected machines by reducing their exposure to process dust. Applications The FM300SN is designed for environments requiring highly efficient sawdust and chip extraction systems during woodworking operations. It is particularly recommended for: carpentry workshops furniture manufacturing plants production of solid wood panels and components central dust extraction systems in production halls Compatible with machines such as: planers and jointers thickness planers spindle moulders sliding table saws edge banders Standard Equipment powder-coated steel housing three-phase 400 V motor aluminum impeller with direct drive suction ports: 1 × 150 mm and 3 × 100 mm Optional Equipment flexible hoses Ø100 mm, Ø120 mm, Ø150 mm filter bags Technical Specifications Parameter Value Motor power 2.2 kW Speed 2950 rpm Extraction capacity 3900 m³/h Inlet diameter 150 mm / 3 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 440 × 430 × 450 mm Weight 30 kg