Used Hahn+Kolb 12 Station Indexing Table Automat for sale (53,619)

Year of construction: 1979, condition: not inspected (used), Hahn & Kolb Variomatic 12 station indexing table automat -WKG 443- Nedpehg Nkrefx Ag Ijlh Offered here is an automatic indexing plate machine from the company Hahn&Kolb. Technical data: Manufacturer: Hahn&Kolb Type: Variomatic T 4-12 Year of manufacture: 1979 Table: Ø 630mm Units: 1x spindle unit, 1x slide unit, 8x quill units Chuck outer diameter: 135mm Max. Workpiece clamping width: 80mm Max. Drilling capacity in steel: 16mm

Condition: ready for operation (used), Year of construction: 1985, A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible. Nlodpfx Agjwaa Iue Ioh

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Nlodpfe Adzhrjx Ag Ish Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Access: 2 side doors, safety light curtain, release mechanism Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Condition: used, Rotary transfer table, rotary indexing table with 16 stations Rotary transfer machine + hydraulic press TOX Rotary transfer machine, special-purpose machine with several assembly stations Manufacturing and assembly system using a rotary transfer process From the special-purpose machine manufacturer "AKE-technologies GmbH" Nsdpfx Aogd D U Eeg Ijlh Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS, type TC500, with 16 stations - pressing station with TOX power unit - vibratory conveyor - conveyor belts - inspection stations - some stations are still visible in the pictures but have already been dismantled Space requirement L x W x H approx. 3500 x 2750 x 2300 mm Weight approx. 3000 kg All in like-new condition - The system has never been used in series production.

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, Nlsdpfjqmfv Sox Ag Ijh 5.5 kW motors, gripper clamping system, switch cabinet

Condition: like new (used), Year of construction: 2020, FIBRO FIBROTOR EM12 Rotary Indexing Table 6+ units available Manufacturer: FIBRO Model: FIBROTOR EM12 Type: Rotary Indexing Table / Indexing Drive Condition: Installed in IMA line that was never commissioned. Almost new condition Application: Automated production, assembly, machining, handling and indexing systems EM.12.0220.9.152.08.0.0.3 0008143150-010-01 Description FIBRO FIBROTOR EM12 rotary indexing table, designed for high-precision intermittent rotary positioning in automated manufacturing and production machinery. The FIBROTOR range is widely used in industrial automation applications where accurate, repeatable indexing and positioning of workpieces or tooling is required. The EM12 provides a robust mechanical indexing solution and is suitable for integration into automated assembly lines, machining systems, transfer machines, packaging equipment and other special-purpose machinery. Key Features: Nljdpfxez Nahbs Ag Ieh FIBRO FIBROTOR EM12 rotary indexing table Precision intermittent rotary indexing Robust industrial construction Suitable for automated production machinery Repeatable positioning Designed for continuous industrial operation Suitable for assembly, machining, handling and transfer applications Compact mechanical indexing solution FIBRO quality engineering Keywords: FIBRO, FIBROTOR, EM12, rotary indexing table, indexing table, rotary indexer, indexing unit, rotary table, indexing drive, automation, industrial automation, machine tool, assembly machine, transfer machine, CNC, manufacturing, production line, industrial machinery, precision indexing, mechanical indexer.

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool. Nledpfx Agodzp T No Ijh

Condition: ready for operation (used), Lapping machine, Hahn & Kolb - LHD 0 - Machine from a state institution / original condition - Lapping disk diameter 400 mm - Max. workpiece height 120 mm - Max. distance between the cast lapping disks 80 mm - Speed range 40-80-160 rpm - Speed - drive motor 700/1400/2800 rpm - Total power 1.8 - 2.7 kW - Turning device - manually operated - Various lapping mandrels - Documentation Nsdpfx Aezbz Ttsg Ijlh Dimensions: L x W x H 1.4 x 1.3 x 1.9 meters / Weight 1700 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, Year of construction: 1989, operating hours: 4,109 h, machine/vehicle number: 4113, overall weight: 6,600 kg, Hydraulic press brake Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Max. working width: 2500 mm Max. clamping force: 100 t Nsdpfxszyanls Ag Ijlh Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Tools

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Nlodpfxjr I E Its Ag Ish Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: good (used), functionality: fully functional, machine/vehicle number: 542, Equipment: Precision six-jaw chuck -- Cylindrical grinding device -- Dividing device -- Coolant device -- Grinding wheel holder -- Grinding wheels --- Operating instructions Nledpfx Agezutnzj Ijh .

Condition: used, WSM Stationary Screwing Unit, Screwing Station Assembly of parts for car radios and navigation systems, as well as testing of these parts. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with a holding (locking) function. In automatic operation, the doors are locked and can only be opened when the automatic cycle is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic cycle cannot be started with the door open. Functional sequence: The station is supplied with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a single unit passing through. In normal operation, all 3 stations work in parallel. - Positioning the unit with the pre-assembled unit in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparing with the database - Checking the correct locking of the FFC in the connector Nedpfxoibicho Ag Ielh - Raising the carrier and lowering the unit onto the belt - Positioning the unit with the pre-assembled unit in station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the unit onto the belt - Positioning the unit with the pre-assembled unit in station 2.3 - Lowering the light protection cover and establishing contact, positioning the carrier with the test sensors from below - Type-dependent testing of the lighting of the SD and CD slots and buttons - Function test of the CD eject button - Lowering the unit onto the belt > continue If errors occur during the test, they are displayed on the screen and can be corrected if possible. To do this, switch to manual mode and open the doors. After the repair and starting the automatic cycle, the unit is tested again in the station. If no repair is possible (e.g. screwing error), the unit is marked as NIO (Not In Order) in the control system and is not processed further. A manual NIO marking and removal is also possible. More assembly stations, new and used – find them in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Nlsdpfxsxxv D He Ag Ieh If you have any further questions, please feel free to contact us!

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Turning data Turning length: approx. 700 mm Center height above bed: 160 mm Turning diameter above bed: 320 mm Center height above carriage: 100 mm Turning diameter above carriage: 200 mm Spindle bore: approx. 36 mm Nsdpfx Agj Ad E Suo Islh MACHINE DETAILS Manufacturer: Hahn und Kolb Machine type: Lead screw and feed screw lathe Length: 1,800 mm Width: 500 mm Height: 1,500 mm Weight: 1,000 kg

Condition: used, No. 720: Seldom used pneumatic rotary indexing table, 270 mm, 8 positions No. 721: Machine vice, jaw width 125 mm, clamping width 250 mm, rotatable, 360-degree scale Nlodpfjyvqc Isx Ag Ijh No. 722: Bending roll, 350 mm diameter, throat 50 x 60 mm, bending groove 20 mm diameter No. 723: Mounting plate, 500 mm diameter x 30 mm, flange 230 x 30 mm, second side 120 x 25 mm, mounting holes 6 positions No. 724: Flange 350 x 55 mm, collar 230 x 5 mm, 4 x M16 PCD 275 mm, bore 40 mm, bottom side recess 200 x 15 mm No. 725: Press brake tool, 90 degrees, bending length 250 mm, tool length 550 mm No. 726: Flange 250 x 30 mm, 4 bolts PCD 130 mm, 3 holes PCD 210 mm, bore 102 mm, lower side collar 200 x 5 mm No. 727: Festo feed unit BV 100200 with control block, max. belt width 60 mm, max. feed 200 mm No. 109: Electromechanical rotary indexing table, 8 stations, table 850 x 850 x 830 mm, 2 control cabinets Prices on request All dimensions are non-binding; if you require exact measurements, please inquire.

Condition: used, Year of construction: 1982, Multi-spindle lathe Brand: TORNOMAT Model 2 C Nlodpfx Agsyll Atj Ieh

Condition: used, Year of construction: 2001, operating hours: 17,511 h, functionality: fully functional, machine/vehicle number: 1-5341/641134, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,690 mm, total length: 1,900 mm, table width: 600 mm, quill stroke: 400 mm, quill diameter: 100 mm, quill travel distance: 400 mm, type of input current: three-phase, distance table to quill: 400 mm, table length: 800 mm, table height: 340 mm, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 320 mm, input voltage: 380 V, overall weight: 2,500 kg, table load: 500 kg, input frequency: 50 Hz, working range: 500 mm, tank capacity: 500 l, input current: 5 A, stroke length: 400 mm, Equipment: documentation/manual, Charmilles Roboform 35P Wire EDM Machine – Year of Manufacture 2001 For sale is a Charmilles Roboform 35P wire EDM machine, manufactured in 2001. The machine is in used condition, commensurate with its age, and is ideally suited for use in tool and mold making, as well as for general EDM applications. Nlodpfx Asz Hb Dfog Ioh Machine Data - Manufacturer: Charmilles - Type: Roboform 35P - Year of Manufacture: 2001 - Machine Type: Wire EDM - Condition: Used - Operation: CNC control with handheld operating device - Work table: 500 x 400 mm - Dimensions (H x L x W): 2400 x 1900 x 1690 mm - Tool changer - Extinguishing system TECHNICAL DETAILS Travel (X, Y, Z): 350, 250, 300 mm Max. manual feed rate: 900 mm/min Electrode weight: max. 20 kg Workpiece weight: max. 40 kg Magazine configuration: 54/8 Electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Workpiece dimensions: (4x) 320 x 320 x 270 mm, (4x) 320 x 320 x 170 mm The machine can be seen in its entirety in the photos. Please refer to the pictures for the optical condition and equipment.

Condition: used, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine is characterized by an extremely robust mechanical basic structure and is ideally suited for production facilities, workshops, or as a perfect base for a modernization project. Technical data (according to the nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: Nodszni Rxepfx Ag Ijlh Electrical connection: 380 V (CEE plug available) Pneumatic connection: 6 bar "Everything from a single source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet 1 coolant tank Nodpfxsnvdmws Ag Iolh

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Nsdpjz Hfcljfx Ag Ijlh Factory No.: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 units Gear ratio: 1:1 Spindle spacing (center of spindle to center of spindle, diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collet chucks Overall height from tool holder (bottom) to gearbox housing, outer edge (top): 218 mm - 4 spindle drives with collet chuck holders (collet chucks are not included in the scope of supply) - 4 tool spindles can be adjusted steplessly by rotating within the spindle spacing - Ideal for 4 drill holes in a square arrangement from 32 x 32 mm to 97 x 97 mm Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Good condition

Condition: used, Corpus lifting and aligning device Strip-feed table with lifting and aligning device Fezer vacuum lifter Control system: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm You can find more items – new and used – in our shop! Nlsdpjvdcmvjfx Ag Ish International shipping costs available upon request!

Condition: used, Year of construction: 1990, Weight 1,3 t turning length 40 mm cylinder 0-0,5 Nodpfxszndt Uj Ag Ielh rapid traverse 3,7 m/min

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Year of manufacture: 2015 Nlsdpeukg Srofx Ag Ioh Weight: 66 kg Table size: 400x620mm

Condition: used, machine/vehicle number: 65333, Equipment: type plate available, Rotary indexing machine No. 171 Coil winding machine Blume & Redecker 8 stations, double flyer, max. wire diameter: 2 x 1 mm No. 170 Coil winding machine Blume & Redecker 8 stations, single flyer, max. wire diameter: 1.4 mm Nodoylx Tlepfx Ag Ijlh

Condition: used, Year of construction: 2017, Rotary indexing table Manufacturer: Expert Tünkers Type: EDX810/0250/8 Year of manufacture: 2017 Nedpfx Agsyl Swws Ijlh 8-station table (45° indexing) 191026ä