Used Hagen Und Goebel Hg 12E for sale (6,357)

Condition: good (used), Thread cutting machine, Hahn und Goebel HG 12E Spindle speed: 180-900 rpm 380V Lsdpfed Rkbrsx Amaehk Machine no. 1917/16 M4-M65

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Lhedpfx Amozhi Tasask

Condition: ready for operation (used), HAGEN & GOEBEL / Internal thread cutting machine -Type HG 22 EB -Speed range 180 - 1120 rpm -Thread size up to max. M22 / steel -Thread size / cast iron up to max. M 27 -Thread size aluminum / brass max. M 33 -Smallest thread size M6 Lodjzu Nzwepfx Amaehk -Single stroke / continuous stroke -Table dimensions 600x500mm Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1000 kg Errors and omissions excepted.

Condition: excellent (used), Cutting range: M3-M10 in steel M3-M16 in cast iron Lhedpfeyg Dhwex Amajk M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm Includes 1 new tap chuck Everything works smoothly and well.

Condition: used, Internal threading machine, Hagen & Goebel, type HG 124 Lhjdpfxehgnd Aj Amaok Machine No. 4112, Year of manufacture approx. 1980 Threading capacity in steel: M3 to M10 Threading capacity in cast iron: M3 to M15 Threading capacity in brass: M3 to M17.5 Overhang: 250 mm Tailstock travel: 80 mm Table size: 345 x 245 mm Spindle speed: 200 - 1000 rpm Motor power: 0.55 / 1.0 kW Power supply: 380 Volts, 50 Hz - 6 speed stages via belt change (3 stages via belt + 2 motor speeds) - Thread pitch via lead screw - 2 lead screws with 0.8 mm and 28 threads per inch - Table height adjustment with rack and pinion via hand crank on the round column - Spindle mount with taper Ø 14.8 to 16 mm - Gear-type drill chuck Ø 1 to 13 mm Space requirement L x W x H: 900 x 500 x 1800 mm Weight: 260 kg Good condition

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch Lodpfx Ameupbf Dsaehk - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, thread dia. 3 - 10 mm Tools speed 120 - 600 U/min table-size 250 x 350 mm throat 250 mm Ljdpfjlwlk Asx Amaohk voltage 380 V threading length 80 mm total power requirement 0,55 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,7 x 0,7 x 1,9 m

Condition: good (used), Max. threading performance: metric thread, brass M33, cast iron M16, steel M14, including accessories. Ledpfeibmn Eox Amaehk

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 Lsdpfxozt Ai Ee Amaehk the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), functionality: fully functional, Thread-cutting performance in ST 60: M10 – M42 Lsdpezm U Rzjfx Amaohk Tool holder: MK 4 Motor power: 4 kW Drill chuck taper: B24 6 speeds: 35 – 185 rpm Switching frequency – max. threads per hour: 800 Quill stroke approx.: 120 mm Overhang, guide/spindle: 300 mm Table clamping surface: 645 x 500 mm

Condition: used, Year of construction: 2026, functionality: fully functional, load capacity: 1,500 kg, construction width: 1,200 mm, Rotating device Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Lhjdpfx Ajzhp Dfsmask Technical condition: New Description: Rotating device, 205 degrees, for complete emptying of all containers, load capacity 1500 kg, support arm permanently mounted/foldable, incl. hoses & quick couplings, available from stock.

Condition: good (used), Threading machine, bench drill, pillar drill Lodeyvfzwjpfx Amaehk Manufacturer: Hagen

Condition: used, Year of construction: 1993, functionality: fully functional, input frequency: 50 Hz, input voltage: 380 V, Equipment: documentation/manual, Grinder for sharpening saw blades and CrV saw discs. Lhjdpfx Aezv H Uwsmask

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH Lhedjzubtlspfx Amask • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Year of construction: 2020, operating hours: 6,134 h, condition: like new (used), functionality: fully functional, We are offering this like-new Bedo and Lantech carton erector/carton sealer with a conveyor system, manufactured in 2020. Manufacturer: Bedo and Lantech Model: Carton erector/carton sealer/conveyor system Year of manufacture: 2020 Condition: like new Machine type: Carton erector/carton sealer Ledpfxszbix Dj Amashk If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2007, REF: MM6439 Wick und Schaefer GmbH flow-meter rotary filler set up for 500ml PET sports cap filler with bottle cap Infeed/sorter and bottle cap tightener. Manufacturer - Wick und Schaefer GmbH. Model - MIN.FM.Servo. Date of manufacture - 2007. 2-stage filling - stage 1 is main fill and stage 2 is final top up fill. With attachment for CIP. Previously used for vitamin enhanced flavoured water. Lsdpfsza Eyuox Amajhk Overall dimensions - 3600mm long x 2130mm wide x 2300mm high.

Condition: used, empty load weight: 1,860 kg, maximum load weight: 6,140 kg, overall weight: 8,000 kg, axle configuration: 2 axles, first registration: 09/1985, loading space length: 4,500 mm, loading space width: 2,440 mm, loading space height: 500 mm, total length: 6,350 mm, total width: 2,500 mm, total height: 1,800 mm, suspension: steel, tire size: 10R17.5, color: blue, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body, 2 axles, BPW axles, tandem axle, leaf spring suspension. Lhedpfxji Rm Uye Amaok ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Oversize vibrating screen Chain conveyor to dryer Belt dryer Chain conveyors from dryer Ledpjxa Drhofx Amaehk Vibration separator

Condition: used, Year of construction: 1980, functionality: fully functional, We are offering this used universal drilling and milling machine, ALF 80, manufactured in 1980. Drilling machine SORALUCE ALG80, including technical documentation. Heidenhain ND70 control system. Tilting table for drilling machine, complete with tooling for the drilling machine. Manufacturer: Universal Drilling and Milling Machine Type: ALF 80 Year of manufacture: 1980 Machine no.: 55/5-110 Date: 10.11.1980 Lhsdpfezl Rqhex Amajk If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 65487, Equipment: documentation/manual, For sale is an Innomatec LTC-802 M Leak Test Computer in like-new condition, from our company’s inventory. The device was factory-calibrated by Innomatec in 2026 and will be sold including a current factory calibration certificate. According to the manufacturer, there are currently no restrictions regarding service or spare parts availability. Manufacturer: Innomatec Mess und Schnellanschluss Model: LTC - 802 M Year of manufacture: 2019 Condition: like new Category ID: 404 Type ID: 2224 Type: Measuring system Technical data Manufacturer: Innomatec Model: LTC-802 M Year of manufacture: 2019 Mass flow method Pressure range: 0.05 to 5 bar Single-channel leak test device Configurable testing system Suitable for large-volume components Factory calibration 2026 Scope of delivery: Innomatec LTC-802 M Original power supply Accessories as shown in the photos Factory calibration certificate Operating instructions (as shown in the photos) Lodpfx Aozltyfemaohk Application areas Automotive industry Medical technology Industrial manufacturing Quality assurance Leak testing Automated production systems Condition Like-new condition Factory-calibrated by Innomatec (2026) Completely cleaned Ready for immediate use Note: The photos of the current factory calibration certificate are part of the listing and can be found in the attached images. Sale is made by a company with an invoice. Inspection possible by appointment. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Georgian bar assembly table Complete In very good and clean condition Good working order, tested As it is Available immediately Lsdpfxsztyzrs Amajhk

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, For sale: a drilling and milling machine from Alzmetall. Type: Plus 3 DG. Inspection and test run possible at any time. Ljdpfszk U Dpox Amajhk Forklift available for loading.

Year of construction: 1990, condition: used, functionality: fully functional, For sale is a robust and fully operational roll forming machine for the production of corrugated and tile-profile sheets made of aluminum. The system is suitable for the continuous production of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and impresses with its solid industrial design. Thanks to the integrated profiling line, the cutting and embossing tool, and the automatic stacking device, an efficient production process is possible, from the coil to the finished profile. The system is particularly designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, thus offering a versatile range of applications in the field of sheet metal processing and profile manufacturing. System components: Lsdpfxjy Sxhwe Amajhk - Coil - Profiling line - Cutting and embossing tool - Automatic stacking device Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugated profile 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm and 1.0 mm Condition & Inspection: The system is ready for production, is in fully operational condition, and is currently still used for production. This allows the functionality to be verified on-site if desired. The roll forming machine can be inspected at any time by arrangement at our location in Krostitz, Hilchenbacher Straße 2A. The system is immediately available and ready for sale. We will gladly provide further technical information, images or details upon serious interest.

Condition: used, Year of construction: 2000, Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks. Additional title: vertical, conical stainless steel tanks Capacity: 3000 l/tank Width: 1,55 m Height: 3 m Weight: 600 kg Material: V4A stainless steel Position: vertical, standing on feet Base construction: cylindrical tanks with dished top and conical bottom Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam Lhsdpfx Aozty H Ijmaok

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Lhedpezdc D Sofx Amaek Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual