Used Hagen & Göbel Hg 6 for sale (48,918)

Condition: good (used), Threading machine, bench drill, pillar drill -Manufacturer: Hagen & Göbel, Thread drilling machine type HG 6 with guide plate device -Clamping table: 350 x 290 mm -Travel distance: 310 mm -Spindle mount: Ø 12 mm -Projection: 235 mm -Speeds: 710/1120/1800/2800 rpm -Column: Diameter 85 mm -Spindle stroke: 35 mm -Motor: 0.37 kW Ljdpfx Apoyvfzwjvsrl -Accessories: incl. machine vice, see photos -Dimensions: 685/490/H1340 mm -Weight: 212 kg

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge Lredpfsupbf Dox Apvel - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: good (used), functionality: fully functional, Thread cutting capacity in ST 60 M 22 Thread cutting capacity in cast iron M 27 8 speeds 180 - 1120 rpm Console version with height-adjustable head . with - or - without ROMAI multi-spindle Lredpfjy Hf Aksx Apvjl .

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Lrodpfjy Hdm Uex Apvjl

Condition: good (used), Threaded snowing machine Hahn and Goebel HG 12E Spindle rotation 180-900 rpm 380v MaschNr.1917/16 M4-M65 Lredpfx Apsd Rkbrevsl

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 Lrsdpfxshgnd Ae Apvjl throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: used, thread dia. 3 - 10 mm Tools speed 120 - 600 U/min table-size 250 x 350 mm Ljdpfx Apolwlk Aevorl throat 250 mm voltage 380 V threading length 80 mm total power requirement 0,55 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,7 x 0,7 x 1,9 m

Condition: good (used), max. tapping capacity, metric thread brass M33, cast iron M16, steel M14, incl. accessories Lredpjibmn Esfx Apvsl

Condition: used, mileage: 181,500 km, power: 115 kW (156.36 HP), first registration: 08/2011, fuel type: diesel, overall weight: 7,490 kg, tire size: 205/75R17.5, axle configuration: 4x2, wheelbase: 3,150 mm, next inspection (TÜV): 11/2026, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, Equipment: ABS, additional headlights, cabin, fog lights, low noise, power assisted steering, trailer coupling, Vehicle location: in transit / en route, registration "Haus", double bench seat, rear window, electric mirrors, heated mirrors, 6-speed manual transmission, ABS (anti-lock braking system), constant throttle, power take-off (PTO), fog lights, rotating beacon, leaf suspension, low-noise G1, side aluminum underride protection, green environmental badge. Lrodpfx Aoy N Tb Tspvsl Wheelbase: 3150 mm Body: Waste collection body Hagemann & Partner HG 6 HK HL 1100 approx. 6m³, 2.5 t front axle, rear axle H2 5.6 t, ring gear 312, ABS, reinforced stabilizer front and rear axle, additional sound insulation, automatic daytime running lights, air-operated engine brake, reinforced front parabolic springs stage I, reinforced rear parabolic springs stage II, floor insulation, driver airbag, gearbox lock for PTO, PTO MB 56-2c. All information is provided without guarantee as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Year of construction: 2008, condition: used, Permissible total weight 38.000 kg diameter of tires 385/65R 22,5 160 J Brake system Scheibenbremse KD113 Rear steering axle The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Lrsdpfsyqvz Rox Apvjl please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: HG, Manometer 0 - 0.016 bar, unused, original packaging -Type: Ø 160 mm 0-160 mmWs -Quantity: 1x pressure gauge available Lrjdpeyfm H Tofx Apvjl -Cardboard dimensions: 200/180/H50 mm -Weight: 1.6 kg.

Condition: good (used), Year of construction: 2002, functionality: fully functional, input frequency: 50 Hz, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Lrsdpfx Apeu A Illevel Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm weight 110 kg

Condition: used, Year of construction: 1997, machine/vehicle number: HGS-Single A 97 03 005 Pos.6, Description for the diagram: 1 – Infeed table with cleaning unit (air blower) and crosswise brush for table width, collects residual dust from components 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 4,5 – UV lamp with conveyor – one lamp illuminating from above Lrsdpfoy Sn Srjx Apvel 6 – Quick Wood System RO1400 brushing machine 7 – Venjakob spray booth – 8 spray guns 8,9,10,11,12 – Drying tunnel with mechanical top air supply via nozzles, temperature and airflow can be regulated in 3 zones 13,14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, curing the edges as well 15 – Four-shaft brushing machine with individual height and speed adjustment for each shaft 16 – Intermediate sanding outfeed table 17 – Cleaning unit (air blower) for light surface dust removal 18 – Venjakob spray booth – single-circuit, but can be switched to a second by exchanging the entire spray gun rack (a spare is included) and switching the pump (two pumps included) 19 – Roller conveyor; lineup supported by photoelectric sensors for loading the dryer 20 – 14-shelf drying oven 22 – Outfeed table with two speed levels depending on the unloading speed required by the finishing line.

Condition: used, Year of construction: 1995, sheet width 3060 mm plate thickness 6,0 mm distance between columns 3060 mm max. 730 mm cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 11,0 kW weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 260 x 2,55 m Hydraulic guillotine shear with Lrsdsy Ezz Hepfx Apvsl - ELGO control for backgauge - Cutting gap adjustment - Cutting length adjustment - Cutting line illumination - Side gauge - 2 support brackets

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s Lrodpfxjyq Szme Apvsl - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Condition: used, Year of construction: 2008, sheet width 3100 mm Lodpfevuz Tpsx Apverl plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions

Condition: good (used), functionality: fully functional, Year of construction: 2012, Used 3-meter guillotine shear from Ermaksan Model: HDG 3100 x 6 Lodoyu H Hxjpfx Apverl Year of manufacture: 2012 Steel capacity: 3100 x 6 mm Cybelec control for the backgauge

Condition: new, functionality: fully functional, empty load weight: 115 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, KARCHER HG 64 HEATER TECHNICAL DATA: Model: HG 64 Manufacturer: KARCHER Catalog number: 1.030-510.0 Type: Hot water generator Country of manufacture: Germany Series: Professional Condition: NEW Power supply type (Ph/V/Hz): 1 / 230 / 50 Connected load (kW): 0.3 Inlet temperature (max): 80°C Minimum inlet volume: 400 l/h Water pumping capacity (l/h): 400-1300 Safety valve operating pressure (max): 220 bar Hot water operating temperature (max): 95°C Burner power: 64 kW Fuel oil consumption (max): 5.9 kg/h Fuel tank: 20 L Fuel type: EL heating oil or diesel Operating weight: 115 kg Dimensions (L x W x H) (mm): 880 x 680 x 860 ADVANTAGES OF THE KARCHER HG 64: Robust and durable device - High-performance burner manufactured using "Made in Germany" technology. Proven Kärcher safety technology guarantees protection for the device and user. Increased cleaning performance thanks to the use of hot water - Shorter cleaning times and lower labor costs. More effective removal of oils, fats, and grease. Effective germ removal and protection of delicate surfaces. Exceptionally easy maintenance - Easy access to all parts requiring service and maintenance. Integrated fuel filter and removable fuel tank for cleaning. KARCHER HG 64 KIT EQUIPMENT: Lsdpfx Apjxykwwsvjrl Karcher Classic gun – M22 thread Karcher 1050 mm spray lance 10 m hose – DN8 – 250 bar – 100°C – M22/M22 Connecting hose (high pressure washer – water heater): 3 m – DN8 – 315 bar – 60°C

Condition: used, Year of construction: 2000, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes 20 Hub/min oil volume 160 ltr. cutting angle 1.6 ° Control ELGO Number of working hours ~ 1.100 h total power requirement 11.0 kW weight 5250 kg range L-W-H 3800 x 1940 x 1560 mm from a maintenance workshop with only approx. 1.100 operating hours (!!) Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit Lsdpfxoxacfae Apverl * for electric back stop * Input of target/actual position value possible - NC electro-motoric back stop * travel path of back stop X = 750 mm * back stop ball screw with no play * travel speed 100 mm/sec - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/interference protection - 1x side stop with T-slot & millimeter scale - 2x front support arms - original operating instructions including CE declaration

Condition: good (used), geared motor, electric motor Lsdoc Nt Rcjpfx Apvorl -Speed: 26/80 rpm -Power: 0.18/0.55 kW -Design: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Brake -Dimensions: 525/200/H200 mm -Weight: 28 kg

Condition: good (used), Year of construction: 1992, cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. Lodpfxor R Abpo Apvorl -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm Lsdpfx Apexaa D Hjverl distance between columns 3100 mm down holder 14 Stück oil volume 150 ltr. no. of strokes 18 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück no. of strokes 18 Hub/min Ljdpsxabzgofx Apverl oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC CybTouch total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device (monoblock)

Condition: new, sheet width 2100 mm plate thickness 6,0 mm ST 42 thickness at "Niro-steel" 4,0 mm VA cutting angle 1,2 Grad no. of strokes 28 Hub/min oil volume 150 ltr. Lrsdpfexaa Acex Apvel down holder 11 Stück control CYBELEC CybTouch engine output 11,0 kW back stop - adjustable 1.000 mm table height 800 mm weight 4.500 kg range L-W-H 3.010 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 4100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 18 Stück no. of strokes 15 Hub/min oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC Cybtouch back stop - adjustable 1000 mm work height max. 800 mm engine output 11,0 kW weight 8.100 kg. range L-W-H 5000 x 2410 x 1650 mm ----- Lrjdpfx Aoxaa R Tjpvol electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German