Used Grifols Grifols Dg-224 Blood Typing Solution for sale (41,284)

Condition: used, This listing is for a Grifols DG-224 Blood Typing Solution. The unit is in full working condition and is ready for intimidate release. The Grifols DG-224 is a sophisticated diagnostic instrument designed for use in clinical laboratories, particularly in blood typing and antibody investigations. It is an integral part of the DG Gel system, which employs column agglutination technology (CAT) to deliver precise and reliable testing results. Below are detailed insights into the features and specifications of the DG-224. Key Features: Manual Testing System: The DG-224 delivers efficient testing procedures, making it suitable for both patient and donor testing while maintaining a comprehensive assay menu. Compatibility with DG Gel Cards: This instrument works exclusively with DG Gel cards, which utilize 8-column gel technology to facilitate accurate blood group typing and detection of unexpected antibodies. Load Capacity: The DG-224 is designed to accommodate up to 24 DG Gel cards, allowing for high-throughput testing in busy laboratory environments. Removable and Interchangeable DG Spin Head: The device features a unique spin head that can be easily removed and replaced, ensuring ease of maintenance and versatility. Pre-Programmed Centrifugation Conditions: The DG-224 includes pre-set centrifugation parameters specifically optimized for use with DG Gel cards. Centrifugation Speed: The instrument operates at a centrifugation speed of 990 rpm ±10 rpm, ensuring effective separation and analysis. Ledpfx Afjxxz N Ue Sshl Digital Display and Alarm System: The DG-224 is equipped with a digital display for easy monitoring of the testing process. It also features an alarm system to signal any operational issues. Safety Features: Built-in safety systems include out-of-balance control to prevent misuse in case of improper loading and detection mechanisms for door opening during operation, enhancing user safety. Technical Specifications: Voltage: 100-240V, allowing for use in a variety of international settings. Frequency: 50-60 Hz, compatible with global power specifications. Maximum Input Power Consumption: 50 W, indicating low energy consumption. Fuses: Requires 2 x T 2A L 250 V fuses.

Condition: used, This listing is for a Grifols DG-224 Blood Typing Solution. The unit is in full working condition and is ready for immediate release. The Grifols DG-224 is a sophisticated diagnostic instrument designed for use in clinical laboratories, particularly in blood typing and antibody investigations. It is an integral part of the DG Gel system, which employs column agglutination technology (CAT) to deliver precise and reliable testing results. Below are detailed insights into the features and specifications of the DG-224. Key Features: Manual Testing System: The DG-224 delivers efficient testing procedures, making it suitable for both patient and donor testing while maintaining a comprehensive assay menu. Compatibility with DG Gel Cards: This instrument works exclusively with DG Gel cards, which utilize 8-column gel technology to facilitate accurate blood group typing and detection of unexpected antibodies. Load Capacity: The DG-224 is designed to accommodate up to 24 DG Gel cards, allowing for high-throughput testing in busy laboratory environments. Removable and Interchangeable DG Spin Head: The device features a unique spin head that can be easily removed and replaced, ensuring ease of maintenance and versatility. Pre-Programmed Centrifugation Conditions: The DG-224 includes pre-set centrifugation parameters specifically optimized for use with DG Gel cards. Centrifugation Speed: The instrument operates at a centrifugation speed of 990 rpm ±10 rpm, ensuring effective separation and analysis. Ledpfx Afoxxx Ize Sehl Digital Display and Alarm System: The DG-224 is equipped with a digital display for easy monitoring of the testing process. It also features an alarm system to signal any operational issues. Safety Features: Built-in safety systems include out-of-balance control to prevent misuse in case of improper loading and detection mechanisms for door opening during operation, enhancing user safety. Technical Specifications: Voltage: 100-240V, allowing for use in a variety of international settings. Frequency: 50-60 Hz, compatible with global power specifications. Maximum Input Power Consumption: 50 W, indicating low energy consumption. Fuses: Requires 2 x T 2A L 250 V fuses.

Condition: used, This listing is for a Grifols DG Therm Incubator Lodjxxwapepfx Af Sehl The DG Therm is a digital incubator designed for efficient gel card processing. It can hold up to 24 DG Gel cards and 24 test tubes across two independent incubation zones. The on-screen display shows the remaining incubation time and temperature, and it features a programmable alarm and removable trash bin.

Condition: excellent (used), Year of construction: 2022, overall weight: 790 kg, chuck outer diameter: 1,000 mm, bolt circle diameter: 145 mm, total height: 140 mm, total width: 1,000 mm, total length: 1,000 mm, Metal cutting Tooling TDG Solutions - PGI 1000 MACH-ID 9418 Make: TDG Solutions Type: PGI 1000 Year: 2022 Diameter: 1000mm Lhsdpfozcnm Ajx Af Sjl 4 chuck: Yes Spindle bore:145mm Max. speed: 611Rpm Length: 1000mm Width: 1000mm Height: 140mm Weight: 790kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 2,050 kg, total length: 158,200 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, clear span: 2,700 mm, load capacity: 4,100 kg, frame height: 4,000 mm, load per truss pair (max.): 2,050 kg, Pallet racking system: Ljdpfoz Anktex Af Sehl 7 x double rows, each with 4 bays 4 m high, each with 2 beam levels (clear span 2700) Scope of supply: 70 frames, 4 m high (RM4011) 280 floor anchors 70 spacers for double rows 224 beams, 2.7 m long, 0.09 m high (TR27094) 14 load capacity signs Delivery free to construction site Frames are bolted, not pre-assembled Freight / Delivery: - max. 20 working days after payment receipt - free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; - excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Lhsderzq Arjpfx Af Sjl Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: new, Year of construction: 2025, LG WATER SOLUTIONS LG SW 400 GR REVERSE OSMOSIS MEMBRANES – 36 UNITS Lot of 36 new and unused LG Water Solutions reverse osmosis membrane elements. All units remain sealed and originate from the surplus spare-parts stock of a PET manufacturing plant. TECHNICAL DATA Manufacturer: LG Water Solutions Model: LG SW 400 GR Equipment type: Reverse osmosis membrane elements Application: Seawater reverse osmosis (SWRO) Lhjdpfx Ajzvlrzef Sol Dimensions: 8 × 40 inches Certification: NSF certified Quantity available: 36 units Condition: New, unused and sealed Origin: Surplus spare-parts stock from a PET manufacturing plant

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Ljdpfx Afezt H Ras Sshl Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 2,050 kg, total length: 158,200 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, clear span: 2,700 mm, load capacity: 4,100 kg, frame height: 4,000 mm, load per truss pair (max.): 2,050 kg, Pallet racking system: Lhedpfx Afszlccpo Sjl 7 x double rows, each with 4 bays 4 m high, each with 2 beam levels (clear span 2700) Scope of supply: 70 frames, 4 m high (RM4011) 280 floor anchors 70 spacers for double rows 224 beams, 2.7 m long, 0.09 m high (TR27094) 14 load capacity signs Delivery free to construction site Frames are bolted, not pre-assembled Freight / Delivery: - max. 20 working days after payment receipt - free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; - excluding islands! Deliveries to EU countries are subject to individual agreement.

Year of construction: 2021, operating hours: 1,800 h, condition: used, functionality: fully functional, clamping diameter: 200 mm, laser power: 3,000 W, machine/vehicle number: WS-13.04.2021-31-F, laser source manufacturer: Raycus, We offer this used Weni Solution WS6020TL tube laser, manufactured in 2021. Brand: Weni Solution Model: WS6020TL Laser power: 3000 W Lsdjzdza Ropfx Af Sohl Working area: 6000 × 200 mm Year of manufacture: 2021 Input voltage: 400 V/50 Hz ±5% Weight: 3000 kg Power consumption: 27 kVA Matching extraction system also available. Inspection and functional testing before purchase are highly recommended (dismantling on 07/06/2026). Sale exclusively to businesses, excluding any warranty, guarantee, right of return, or conversion, to the extent permitted by law. The machine is sold in its current condition (“as inspected” or “as is”). Information on technical data, condition, operating hours, accessories, and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations, and official requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer’s warranties, or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Construction Material: Stainless Steel Horsepower: 1.5 kW Jacket: No Ledpezfh U Dsfx Af Sohl

Condition: new, (made by N & N) new ! all stainless steel capacity 300 L. (= ± 10CF) 3 x 400V, 5,5kW double Ribbon mixing arm dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved Lodpez Eilhsfx Af Sohl adjustable speed 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: spices, ingredients, powders,…

Condition: used, all stainless steel with top hold down belt Lhedpfx Afsz Eilbe Sol water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm Lsdpfxoz Eikwj Af Sshl belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: used, Year of construction: 2004, Technical details: x-travel: 2700 mm y-travel: 1000 mm z-travel: 1050 mm Ledpoz Egckofx Af Sehl T-slots: 7x22 feed speeds: 10000 mm/min - Pallet Diameter : 3.300x1.000 mm - Max. Feedrate X/Y/Z: 10.000 mm/min *

Condition: ready for operation (used), Year of construction: 2008, turning diameter 500 mm swing dia. 800 mm turning diameter over bed 450 mm turning length 800 mm x-travel 360 mm Lhsdoz Ebvxepfx Af Sel z-travel 980 mm spindle turning speed range 3200 U/min max. torque on the spindle 235/939 Nm spindle bore 110 mm turret (x-stations) 12 control Fanuc 31i tailstock quill taper MT 4 total power requirement 30 kW weight of the machine ca. 7,6 t dimensions of the machine ca. LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor - Incl. additional high-pressure pump

Condition: ready for operation (used), Year of construction: 2013, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm • Controller: E 355 (2-Axis Control) Lsdeyv H Tispfx Af Sehl • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 18,000 rpm, travel distance X-axis: 1,020 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 805 mm, controller manufacturer: FANUC, controller model: 31i-b5, spindle motor power: 22,000 W, table load: 800 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Number of axes: 5 (X, Y, Z, A, C) • Simultaneous 5-axis machining • Absolute feedback system (absolute pulse coder on A- and C-axis) • Table diameter: 800 mm • Maximum workpiece diameter: 1,000 mm • Maximum workpiece height: 630 mm • Spindle motor power: 22 / 18.5 kW • Spindle taper: HSK-A63 • Tool holder type: HSK63A • Flood coolant pump: 2.5 kW / 0.44 MPa / 100 L/min • Through-spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Tool load monitoring • Portable MPG handwheel • Automatic power off Lhjdpjzlg Ngefx Af Sjl • Program storage: 10,240 m (4 MB) • 1,000 program capacity • 400 tool offset pairs • 48 work coordinate systems • Large capacity memory: 2 GB • Data server & memory card: 2 GB • Embedded Ethernet • iHMI easy operating system (EZI & Machining Cycle) • DSQ1 (AICC II – 200 blocks) Additional equipment • Hinged belt chip conveyor (rear side) • Cyclone filter system • Renishaw probe ready (RMI-Q) + software • External power transformer • Electrical line filter • Machine lifting hooks

Condition: used, Year of construction: 2007, Technical details: spindle diameter: 160 mm x-travel: 6500 mm y-travel: 3000 mm W-axis (spindle longitudinal): 1000 mm dimension of the ram: 400 x 420 mm ram stroke: 1000 mm bore spindle turning speed range: 1 - 2000 U/min spindle taper ISO: 50 feed speeds: 2 - 6000 - 8000 mm/min rapid speed: 8/10 m/min total power requirement: 100 kW Ljdpfx Aszuy Sgjf Sjhl weight of the machine ca.: 76 t dimensions of the machine ca.: 12 x 4 x 7,5 ( 5,4 ü.F. ) m with CNC Steuerung HEIDENHAIN iTNC 530 autom. toolchanger 40-pockets autom. Pickup Station for universal milling head, and facing head rotary table 2500 x 2500 mm , max load 25 to. 1500 mm longitudinal movement floor plate 4000 x 2000 mm measuring probe, chip conveyor and coolant attachment *

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm Lhjdov Rdzbopfx Af Sol y-travel: 1500 mm z-travel: 1460 mm milling spindle motor: 35/30 kW spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories *

Condition: good (used), Year of construction: 2002, functionality: fully functional, Machine-Details Stock-No. 1022-E06190 Ledpfx Afez D Uwge Sshl Type of machine Planer-Type Milling M/C - Double Column Make HEYLIGENSTAEDT Type Heynumill 2700-PF Year of manufacture 2002/2018 retrofit Type of control CNC Storage location Germany Country of origin Germany Delivery time Immediately Freight basis ex foundation Technical details x-travel 3000 mm y-travel 4000 mm z-travel 1500 mm Control Heidenhain TNC 430 M total power requirement 120 kVA weight of the machine ca. 83,2 t Additional information 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the seller's plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Working range Travels X-axis 3000 mm Y-axis 4000 mm Z-axis 1500 mm Max. column passage 2700 mm Max. Distance between work table and spindle nose: Lower edge of ram interface min./max. 660 mm / 2160 mm Workpiece table Length 3000 mm Width 2000 mm Load 4 t/m² T-slots 28 H8 Rapid traverse X-axis 15000 mm/min Y-axis 15000 mm/min Z-axis 15000 mm/min Equipment: CNC control Heidenhain TNC 430 M Milling heads: Straight milling head type FK 120/450 Outside diameter 280 mm Tool holder SK 50 power max. 67 kW max. speed 5000 rpm Coolant supply through the spindle, via adjustable nozzles 1-axis fork-type milling head type FK 100/2D tool holder SK50 power max. 67 kW max. speed 4000 rpm swiveling range A/B axis +105°/-95° Coolant supply via adjustable nozzles Coolant tank 1.000 l Chip conveyor system Change head station Weight specifications: 1 Y-slide 7000 kg 2 ram 10000 kg 3 column 1 8000 kg 4 column 2 8000 kg 5 crossrail 28000 kg 6 Bed/table 20000 kg 7 Hydraulic power unit 1000 kg 8 Cooling unit 1200 kg 9 Coolant tank ??? Total 83200 kg

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm 4 individually adjustable jaws Mounting: Long taper, diameter 80 mm with external thread 125 x 3 mm Keyway 10 mm Lhodpfsfimg Hox Af Sol Overall length with flange and jaws 193 mm Weight 29 kg Age is estimated.

Condition: excellent (used), Year of construction: 2012, Four-jaw chuck Manufacturer: Röhm Diameter: 315 mm Bolt circle: 120 mm Individually adjustable jaws Centering bore: 120 mm Pitch: 625/4 threads per inch Lsdpofklf Ujfx Af Sohl

Condition: excellent (used), Four-jaw chuck make Röhm Lodpfx Afopk A A Hj Sjhl diameter 315 mm single adjustable jaws bolt circle 120 mm

Condition: excellent (used), Three-jaw chuck Make Röhm diameter 200 mm Jaws are centrally and individually adjustable Mounting MK 4 Lsdpjtr Engsfx Af Sohl Weight 25 kg