Used Grid Supports for sale (14,302)

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: Dkedpsttu Sgofx Aileu - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: new, High-quality grid decking with high load capacities, a cost-effective alternative to grid grating – new product – Prices available upon request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (so, for a 2.70m beam, 3 deckings are required = 2,655mm) 1335mm Frame depths: 1.05m 1.10m 1.20m Other depths available upon request! Uniformly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1,000kg, i.e., also per pallet Grid spacing: 50 x 100 or 25x100mm When making an inquiry, please also specify the type of beam (crossbeam) you have! I.e., whether it is a box profile (or IPE beam) 50 or 40mm, or whether you have crossbeams with a step. Advantages: no sharp edges 200% safety factor – independent of the shelving beams Tested for permissible deflection and structural failure Dkodoiuvxbjpfx Aileu Wide selection of standard sizes and load capacities MantaMESH is our market-leading wire mesh decking solution. MantaMESH provides assurance with more than 70% open area and a safety factor of 200%, exceeding the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR sprinklers. Compatible with ANSI MH 26.2 - 2007 Made in Germany Pre-welded, hemmed support channels Pre-galvanized finish Maximum deflection independent of the rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of the beam: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration – we would be happy to create a configuration for your application! Depth 1102mm Width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the beams Front: folds out 30mm Rear: folds down 30mm on the outside Item weight 9.43kg

Condition: excellent (used), You are buying mesh shelves for pallet racking with end station. Size: 1320*850 mm and 890*850 mm Height (L shape): 22 cm Material thickness: 4.24 mm Pitch: 92*48 mm Load capacity: approx. 600 kg/m2 If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Dkedopu Ad Dopfx Ailou Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale!

Condition: like new (used), Year of construction: 2023, operating hours: 127 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 400 kg, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, table width: 2,000 mm, total height: 4,100 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 2,100 kg, product height (max.): 200 mm, Equipment: safety light barrier, 3-axis waterjet cutting machine, CMS Smartline 2040 model, manufactured in 2023. It has a travel range of 4,000 mm on the X-axis, 2,000 mm on the Y-axis, and a maximum cutting thickness of up to 220 mm. The machine features a robust work table with dimensions of approximately 4,150 × 2,080 mm and is equipped with a high-pressure pump. If you are looking for cutting performance to high standards, we recommend our offer for the CMS Smartline 2040. Contact us for more details. • Maximum work table size: approx. 4,150 × 2,080 mm • Cutting system • Technology: abrasive waterjet • Cutting head: 3-axis waterjet cutting head (CMS Tecnoucut) • Maximum cutting thickness: up to 220 mm (depending on the material) • CNC interpolated cutting for complex shapes • Automatic height adjustment on the Z-axis • Axes and movement • CNC-controlled axes: X, Y, Z • Motors: brushless • Guides: linear guides with ball recirculation • Drive system: rack and pinion (X/Y), ball screw (Z) • Positioning accuracy: ±0.05 mm • Repeatability accuracy: ±0.03 mm • Waterjet pressure system • Maximum operating pressure: approx. 4,150 bar (60,000 psi) • Pump power: approx. 22.5 kW • Note: 30 HP high-pressure pump included; see additional options • Control and software • CNC: OSAI Open • HMI interface: CMS Active • CAD/CAM: compatible with EasyCut / EasyPump • Control panel with touchscreen on a mobile stand • Work table and loading • Support surface: steel grid table • Max. load on table: approx. 400 kg/m² • Electricity and connections • Power supply: 400 V / 50 Hz / 3 phases • Installed power: approx. 35–40 kVA (depending on configuration) • Protection rating: IP54 (electrical cabinet) Csblf Hjzh Itxjhm Derh • Safety and equipment • Safety systems and optical barriers Dodpfx Aisz I Sagsleku • Automatic lubrication system (X, Y, Z) • Collision detection system for the cutting head • Laser pointer for setting the zero point • Electrical cabinet and control panel Additional equipment • High-pressure pump (30 HP) • Abrasive feeding system (capacity 270 kg)

Condition: used, 2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm Dksdpfx Asz I A Hqsilou V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit Ideal for positioning large rotors

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has seen only a few hours of operation. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamps; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. opening) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in X-direction without clamping: X = 1500 mm Max. contour milling dimension in Y-direction: Y = 985 mm, less milling cutter radius Max. drilling dimension horizontally in X-direction: H = 1168 mm Z-axis stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling spindle 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearing (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic, max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y directions, only for special bevel gear 7869 with HSK holder Vertical spindles can be activated individually Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: alternating right/left n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - parallel seat 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Holder: M 10 thread, parallel seat 11 mm Total drill length max. 63 mm from mounting end without tool, without holder Dkodjz In Ugepfx Ailsu Sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis “CLAMEX” tool set - Incl. original tool set consisting of 2 pcs. P-system slot milling cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling arbor for P-system slot milling cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling arbor for P-system slot milling cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P, L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders

Condition: good (used), Vogelsang MP 825 Pallet Racking System Vogelsang pallet racking system (type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per bay (distributed across 4 levels with 3 Euro pallets side-by-side, with a bay width of 2,700 mm). The system consists of 1 base bay and 7 extension bays, resulting in a total length of approximately 22 meters. Thanks to the grid decking, the racking is extremely versatile – also suitable for individual items, picking goods, or damaged pallets. The push-through guards and back panel grates included in the scope of delivery ensure maximum safety. Perfect protection against accidental pushing through or dropping of pallets and loads. Manufacturer: Vogelsang Type: MP 825 Length: 22,000 mm Height: 6,200 mm Depth: 1,200 mm Bay width: 2,700 mm Bays: 8 Levels: 4 incl. ground-level space Crossbeam type: INP 100 Load per beam: 3,000 kg Load per bay: 14,000 kg Scope of delivery: 09 x Support frame 6,200 x 1,200 mm, blue 48 x Pallet racking crossbeam 2,700 mm, red 24 x Push-through guard 2,700 mm 32 x Back panel grate 2,700 x 1,200 mm 48 x Grid decking 1,330 x 1,200 mm Your partner for safe storage logistics: Assembly, disassembly & racking inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed correctly and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a renovation, or a warehouse liquidation – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving systems for small parts and archives - Storage platforms for optimal use of space Racking inspection & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (in accordance with DGUV rule 108-007): - Inspection for deformations and damage. - Inspection of safety pins and load signs. - Creation of a legally sound test report including a test label. Dkjdpfx Aiezrlp Selsu "We offer you a suitable financing option for your project from a single source." You can find more articles – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Dodpfoz Iyvpox Ailsku

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Dkedpfxozhx A Rj Ailou Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2003, Max. cutting width: 4300 mm Max. cutting height (horizontal): 2100 mm Max. cutting height (vertical): 2200 mm Max. processing thickness: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm Support below: fixed rollers Material support: aluminum slat grid with plastic supports Small parts support: Yes Measuring system: scale Dsdpfx Aszx E T Rsileku Swiveling saw head: manual Weight (approx.): 750 kg Motor power: 5.5 kW Dust extraction diameter: 160 mm Location:

Condition: good (used), Year of construction: 2002, Striebig panel saw Evolution 6224, manufactured in 2002 Type 6224 Year of manufacture: 2002 Motor: 5.5 kW Cutting length: approx. 5300 mm Cutting height: approx. 2100 / 2240 mm Digital display in the Y-axis Center support Cutting depth: 80 cm Saw blade diameter: approx. 303 mm Wall mounting Adjustable slat grid Wooden back panel Dust extraction connection: D 120 mm Space requirement: approx. 6300 mm x 1250 mm x 2720 mm Weight: approx. 1200 kg Total connected load: approx. 5.5 kW Dkodpfx Aiszuyf Telou Location: available from warehouse 54634 Bitburg, free loading, unpacked Handover in the current condition as inspected without warranty

Condition: like new (used), Schechtl HBM 310 in like-new condition The machine is equipped with: ✅ a roller shear ✅ a foot pedal for single-person operation ✅ an angle stop for highly accurate repeat bending ✅ a support grid with depth setting ✅ a sheet metal bending rail for greater bending flexibility Condition: • like-new technical condition Dkedpfx Aioz H I Hmelou • like-new visual condition • immediately available, no delivery time required • weight: 1480 kg ☑️An inspection and test run are possible upon request.☑️

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Dedpfx Aozp Nt Aoileku Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Dsdpfx Aiezzfr Esloku Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2023, Max. cutting width: 4600 mm Max. cutting height, horizontal: 1958 mm Max. cutting height, vertical: 2070 mm Max. processing thickness: 60 mm Saw blade diameter: 250 mm Motor power: 4 kW Saw blade arbor: 30 mm Bottom support: fixed rollers Material support: aluminum lath grid with plastic pads Small parts support: yes Dkedpfxsz Hp Ede Ailsu Measuring system: scale Saw head swivel: manual Mounting: free-standing Extraction: external extraction required Weight approx.: 910 kg Extraction diameter: 2x100 mm Storage location:

Year of construction: 2011, condition: good (used), Storemaster Regal, Master Tower SL 19, with double-sided pull-out and 6m crane – used: Price at location: €22,500 (net), disassembled and loaded Manufacturer: Storemaster Type: Master Tower SL 19 Year of manufacture: 2011 Max. possible load per drawer with uniform distribution: 1,200 daN Max. possible load per shelf block with uniform distribution: 60,000 daN Max. possible payload under the vacuum device attached to the 6m crane jib: 400 daN PROJECT NO.: 1101 AS 11459 TwenTower SL with 19 large-format drawers, each with a load capacity of 1.2 tons, filling height: 50 mm, Double-sided pull-out – continuous locking not possible, Pull-out roller guides in MasterTower® SL – - Standard design with pivoting function OverheadTop with 5 large-format stacking bays, each with a capacity of 3 tons, Overall height: 4,135 mm (bridge crane height 3,500 mm!!!) Djdpfx Aioz Dtu Rsleku Tower crane system-integrated for max. 400 kg sheet weight with a 6 m operating radius (from 350 kg sheet weight and fully electrified for safety reasons) ... manual version Additional cost for electric trolley for sheet weights ≥ 350 kg (large format 10 mm) Additional cost for electric crane arm swivel for sheet weights ≥ 350 kg (large format 10 mm) VacuMaster special for use with storemaster® drawer systems with a max. of 750 kg storemaster heavy-duty drawer rack system: MasterTower SL 19 (TwenTower base) Surface: Frame zinc-plated and drawers painted according to NCS-S6500-N (dark gray) Item in stock Drawing No.: 1 shelf block for large-format sheet packs, consisting of: 2 side walls 2,200 x 1,785 x 1,000 + welded top plate 220/100/10 19 welded rails in a 100 mm grid 4 side doors made of HEB100x2 200x1,535x650 with hinges 1 top beam pair: front 1x HEB 180 x 3,730 mm rear 1 x IPE 180 x 3,810 mm each with 4 supporting deep-web girders IPE 80 x 1,500 mm 1 frame extensions: 1,500x1,785x3,810 front 2 x HEB 140 x 1,500 (with 1,500 -C85SL length) rear 2 x IPE 180 x 1,500 (with 1,500 -C85SL length) each with 4 supporting deep-web girders IPE 80 x 1,500 mm 3 bracket beam levels IPE 120 x 1,100 with flange plate incl. end face each with 4 connecting bolts (1 piece per bracket arm shoe) each with 2 attached head-deep girders UNP 120 x 1,714 mm each with 2 insert deep girders IPE 80x 1,572 mm 1 top beam pair front 1x HEB 100 x 3,730 mm rear 1 x HEB 100 x 3,810 mm each with 4 supporting deep-web girders IPE 80 x 1,500 mm 19 drawers St-rollers UNP 80 x 3,300 x 1,750 (H*W*D) with ryt gf tiv 080 43 6 recessed deep-web girders QR 40/4, 3 mm from UK 1 tower crane, with electric rotation, electric travel and electric lifting, consisting of: a crane column QR 140/14 x 3,740 mm long (mounted on the right side), a pivoting crane 6,000 mm nominal length x 225° x 500 kg 1 VacuSheet - vacuum lifting device x 750 kg 1 machine nameplate 1 operating manual VacuMaster Basic and VacuMaster Comfort Technical data Due to its modular design, the VacuMaster Basic and VacuMaster Comfort can be individually configured for any application. The technical data of the device depend on the chosen configuration. Below, you can determine initial technical parameters for your VacuMaster based on preconfigured lifting devices for standard workpiece formats. Here's how to proceed: 1. Select the type of handling: e.g. Horizontal handling 2. Select the maximum load capacity: e.g. 250 kg 3. Select the workpiece format: e.g. 2,000 x 1,000 mm Condition: good Available: immediately Location: 87719 Mindelheim

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Dsdpeyfta Tsfx Aileku Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Dsdpfx Aiougpwnolsku Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, This listing is for an Astoria-Pacific 311 Chemistry Analyser The unit is in full working condition and is ready for immediate use This combination is for 1. Astoria-Pacific 311 AutoSampler 2. Model 302D Micropump - Computer controlled 3. Model 303 Flow System 4 Model 305D Digital Detector Overview of the Astoria-Pacific 311 Sampler The 311 XYZ Sampler is a core component of Astoria‑Pacific's modular segmented flow analysis systems, such as the Astoria and Astoria2 analysers: Functionality It acts as a random-access sample introduction system in an XYZ grid format, enabling automated handling of samples in liquid analysis workflows Integration & Automation It is typically integrated with detectors, peristaltic pumps, and cartridge bases to form a complete automated analyzer capable of walk‑away operation and high throughput, with assay results available within 15–20 minutes upon sample loading Throughput & Sensitivity When paired with the Astoria Analyzer, systems using the 311 sampler can process between 90 to 120 samples per hour, delivering part-per-billion detection capabilities along with efficient reagent usage (up to 10× lower compared to traditional SFA systems) System Flexibility The 311 sampler offers flexibility and ease of use, allowing automatic insertion of check calibrants and compatibility across different system configurations (e.g., Astoria2, SFA3000) Dkjdpsxhftiefx Ailou Support Modules For optimal performance, it can be paired with auxiliary modules such as the 322 Auxiliary Pump, which serves as a dedicated wash pump for the sampler4115 302D 303 305D Autosampler +

Condition: excellent (used), Year of construction: 2017, operating hours: 5,607 h, Mazak Optiplex Nexus 3015 Fiber 3KW laser cutting machine Manufacturer: Mazak Type: Optiplex Nexus 3015 Fiber 3KW Year of manufacture: 2017 Condition: Very good, operational Operating hours: Laser: 11,282 hours Beam: 5,607 hours Power: 3KW CNC control: MAZATROL PREVIEW 3 Weight: 15,500 kg Dimensions: 8,490 mm x 3,485 mm x 2,010 mm Axis travel: 3,100 mm x 1,580 mm x 110 mm GENERAL MACHINE OPTIONS - Automatic calibration system - Focus position adjustment - Nozzle cleaning brush - Collection container for material scrap - Transformer for the European market - Protection window for multi-control cutting head - Programming function on the control panel via fixed programs - Cutting table layer detection - 1 set of adjustment tools - Machine feet / leveling shoes - Non-contact height measurement with repeat function Dodpfx Aszza Hkjilsku - Manual workpiece clamping - Preparation for 3kW resonator - Additional selector switch for cutting gas - NC monitoring for protective gas pressure - Machine status indicator light - Support grid (distance between struts 100mm) will be newly installed - Preparation for dust extraction system - Work area lighting - Machine with CE marking - Automatic shutdown via circuit breaker activation - 2-position pallet changer - NC repeat function - Relocation detector - Mazatrol Preview 3 control - 15" Xga Color TFT monitor - LAN interface - USB interface for PC Special equipment - Automatic nozzle changer magazine with 8 positions - Intelligent monitoring + focus point detection - Extraction system for laser cutting machine Donaldson DFPRO4 Scope of delivery - Set of manuals in electronic form on CD - NOZZLES will all be included / customer cannot use these on the new machine - Lens for multi-control cutting head - Multi-control cutting head - 3rd auxiliary gas line (30 bar)

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. Dksdpfev Iaqysx Ailju TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2021, Suitable for (model): Unimog, truck, UNIMOG. We are selling one used Schmidt Stratos S 30 - 24 VEP 490 spreader, manufactured in 2021. STRATOS S30 Schmidt silo spreader STRATOS S 30 (24), 3.0 m³ stainless steel container Dksdsyq Ar Aopfx Ailsu Auger conveyor ("S") Protective grid 40x40 mm, steel (for S/F/D25-30) Folding roof Profi, stainless steel (for 25-30) Container in orange RAL2011 (standard) Auger cover (for S17 - S30) Stainless steel ladder (standard for stainless steel spreader) Rear cover, stainless steel FS preparation (additional valve on the hydraulic block) Drive via vehicle hydraulics ("V") Connections at the front of the unit (for V) Hydraulic couplings, leak-proof ISO16028, P=Size 2(M) R=Size 3 Control system Evolution Professional "EP", incl. electric adjustment of the spreading pattern Premium spreading disc "490" (spreading width 2 - 10 m) Ball joint frame for Unimog 405.125 Support feet (4 pcs.), 3 t., crank drive in the center, incl. lateral supports Rotating beacon (1 piece) Warning tape red-white, at the top of the container Marking "Winter service" (German) Contour marking according to UN ECE R48 Splash guard 2,000 mm Minimum flow connection on the valve block, without pressure gauge Flow rate detection with load sensing pump (for V) Location: 93095 Hagelstadt

Year of construction: 1999, condition: used, functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Dkjdpfsiffpxox Ailou Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Feed-through line – yes Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Working depth700 mm Passage height max 40 mm Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Drilling spindles per support – 2 CE marking – yes Weight 1.600 kg

Condition: used, This listing is for the Julabo FL601 Recirculating Cooler/Chiller The unit is in full working condition and is ready for immediate use The Julabo FL601 is a recirculating chiller engineered for routine cooling applications in laboratories and process environments. Designed for space-saving integration, energy efficiency, and ease of operation, the FL601 delivers precision temperature control with an extensive range of safety and connectivity features. Performance & Control Temperature Range: −20 °C to +40 °C Temperature Stability: ±0.5 °C via microprocessor PID control Cooling Capacity: Up to 600 W at +20 °C Pump Flow Rate: Up to 23 L/min at 1 bar Return Line Temp Limit: +80 °C The FL601 features reliable PID temperature control, making it suitable for continuous operation in demanding environments such as analytical instrumentation, rotary evaporators, and closed-loop process cooling. Design & Ergonomics The FL601 emphasizes ease of use and maintenance: Splash-proof keypad with large, bright LED display Accessible top-mounted filling port with lift-up cover Dodexhf A Djpfx Ailoku Second hinged document tray for the user manual or install documents Removable front venting grid for quick cleaning of the condenser Front-facing drain tap for easy fluid replacement Integrated stainless steel bath tank with level indicator Compact footprint with front and rear ventilation only — no side vents — allowing side-by-side placement with other devices Smart Features & Connectivity RS232 interface for PC/lab system connectivity Potential-free alarm output (max. 30 VA) for external device integration IP21-rated housing (IEC 60529) for splash protection Optical and audible low-level alarm system for added safety Key Advantages at a Glance Feature Benefit Microprocessor PID control Stable, accurate temperature regulation Front-facing vents Space-saving design; units can be placed side-by-side Easy access filling & draining- Reduces downtime for maintenance Integrated stainless steel bath tank Corrosion-resistant and durable Audible/visual alarms Ensures safe operation and early fault detection RS232 & alarm contact Ready for system automation and remote monitoring Quiet operation (~55 dBA) Suitable for sensitive lab environments Robust construction (~48 kg) Long-lasting performance in daily use Common Applications Rotary evaporators Refractometers Spectrophotometers Distillation units Jacketed reactors Heat exchangers Laser cooling and OEM equipment support

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimensions 2,240 x 880 mm, Dkodpfx Ajul Uy Heilou motorized height-adjustable counter supports, 4 pressure beams, individually switchable on and off, 4 swing grids, available from Seevetal location, sold "as is" and as inspected, Ex works, excluding transport, subject to prior sale.