Used Graule - Sofort Verfügbar - - Zs 200 N Mit Rlh Und Ro for sale (71,984)

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Nedpsk H Ic Ujfx Af Solg The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Condition: new, Year of construction: 2026, Product Details Crosscut and miter saws Type ZS 200NF Crosscut and miter saw with a maximum cutting height of 200 mm Stable gray cast iron construction Precise ball bearing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick miter adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard can be connected to an extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on the left and right Left side with scale and stop slide Technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Nsdpfx Ajcnz Rvjf Solg Cutting height 200 mm (at 90°) Miter range horizontal 45° - 90° - 25° Miter range vertical 60° - 90° - 30° Saw blade diameter 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Available from stock in 54634 Bitburg - Immediately available - Upon request, we will also be happy to offer you the saw blade.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. Nsdpfx Afszt Ai Es Sjlg with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Vertical miter range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Nledpfx Afoy S Rq Rj Sjg Machine width: Weight: 300 kg

Condition: used, Year of construction: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Nlodpfx Aoy S Rrbef Seg Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 200 mm, saw blade diameter: 520 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, workpiece height (max.): 200 mm, feed length X-axis: 420 mm, length stop: 8,800 mm, pressure: 5 bar, space requirement length: 8,800 mm, space requirement width: 1,200 mm, Equipment: double-sided, Mobile saw base frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 - 5960 mm, with digital LED measurement display, measuring length including extension approx. 8800 mm, Nsdpev Hhg Tefx Af Sjlg Saw base frame with 6 crank supports ensure safe standing when working. With electrical power distribution and 3-way socket 230 V Mobile saw base frame Beck ESF 1, saw ZS 200 mounted on base frame

Condition: excellent (used), functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 295 mm, saw blade diameter: 520 mm, saw blade bore: 50 mm, rotational speed (max.): 2,800 rpm, overall weight: 300 kg, cutting depth: 200 mm, extraction nozzle diameter: 100 mm, Further technical data Cutting width: 90° 420 mm | swivelled at 45° 295 mm Cutting depth: tilted at 45/90 degrees 140 mm | 200 mm Nlsdpfx Asxtpuuef Sog Special equipment 1019 Machine tiltable on both sides from the front via hand crank 1002 Hydraulic feed brake 1049 HM circular saw blade for wood 520x4.0x50 mm / 60 teeth negative

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Nledpfx Aon R A Ewof Sjg Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height.

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Nljdpevxr Thjfx Af Ssg

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, We offer this used GRAULE ZS 200 - F miter saw, year of construction 2003. Manufacturer: GRAULE Nlodezx N T Ispfx Af Sog Model: ZS 200 - F Serial number: 2003/3-13 Year of manufacture: 2003 Saw blade diameter: 520 mm Bore diameter: 50 mm Rated voltage: 400/230 V Rated current: 6.4 A Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2024, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal mitre angle range: 45° - 90° - 25° Vertical mitre angle range: 60° - 90° - 30° Infeed roller table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Machine length: Machine width: Weight: 300 kg Nlsdpfxjiuld Ss Af Seg

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm Cutting width: 420 mm at 90° 295 mm at 45° Cutting height: 200 mm at 90° Nljdpfx Afjkwhmfs Ssg 140 mm at 45° The saw can be tilted to an acute angle of approximately 25° on one side and tilted flat to the left up to 30°. Saw blade diameter: 520 mm x 50 mm Dust extraction port diameter: 100 mm Weight: 250 kg With the following optional equipment: - Carbide-tipped circular saw blade 520x4.0/2.8 x 50, 60 teeth, for wood - Machine can be tilted on both sides from the front using a hand crank Availability: short notice / 2022 Location: Solingen

Condition: new, Year of construction: 2026, Miter and compound miter saw with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontal adjustable fixed stops lower saw blade guard, can be connected to a dust extraction system Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees -90 degrees Model-----Saw blade-----Dust extraction port-----Weight ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories available upon request: Roller conveyor / fence type RO, RL, RLK, RLH and RLHK for processing aluminum and PVC profiles and for wood profile board processing the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with at least 2 support feet 3 m type RLK: roller conveyor fence with a fence slide that can be folded back - Machine stand - Main switch with lock Nsdpfx Aecnz N Hef Sslg - Infeed roller conveyor Ro-St60 3 meters, right - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Heavy-duty fence/roller conveyor mm - scale on the rear beam, measuring slide with magnifying glass and fence flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock at 54634 Bitburg - free loading - - immediately available - Location: In stock at 54634 Bitburg - free loading - - immediately available -

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Nlodpfx Aoi Dfidjf Sjg Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. Nodpfx Aeyq Rdyof Selg The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Nsdpswcgr Ejfx Af Sslg Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Nljdpfxsu R Sypj Af Ssg - new exhibition machine -

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional solution for crosscuts, miter cuts, and bevel cuts The ZS 200 N is ideally suited for crosscuts, miter cuts, and bevel cuts. Materials such as wood, PVC, and aluminum profiles can be processed cleanly and precisely. The saw unit runs on a hardened guide arm and can be swiveled horizontally on both sides for miter cuts. The "N" stands for "Neigung" (inclination) and indicates that the saw unit can also be tilted vertically on the side – thus, bevel cuts can also be carried out easily. Fact Check ZS 200 N Crosscut and miter saw with a maximum cutting height of 200 mm Stable cast iron construction Precise ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Fast miter adjustment up to 65° horizontally and up to 60° vertically Adjustable stops and lower saw blade guard Can be connected to a dust extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical Details: Motor 400 V / 5.0 kW Speed 2800 rpm Nledpfx Ajh Nu Iujf Ssg Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45°-90°-25° Miter range vertical 60°-90°-30° Saw blade diameter 520 mm Weight 310 kg Scope of delivery: Miter and bevel saw ZS 200 N Machine stand Machine can be tilted on both sides from the front Hydraulic feed brake Circular saw blade HM Z 60 negative Operating tool and hand crank

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW Nljdpfx Afoxaaxds Sjg weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible Nlodpfx Ajykuh Nsf Ssg TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Nedpfxoyh Nfue Af Solg Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW, 7.5 hp Cutting height 200 mm Nododxw U Iepfx Af Selg Tilts up to 60° to the left, up to 30° to the right via hand crank from the front Cutting height when tilted at 45°: 140 mm Cutting width 420 mm, cutting width when swiveled at 45°: 290 mm Swivels up to 60° to the left, up to 45° to the right Includes saw blade for wood 6,000 mm heavy-duty outfeed roller table, mounting side on the left, adjustable stop with handwheel from the machine in length, pneumatically lockable, length digitally readable, digital display in 230V version 4,000 mm heavy-duty infeed roller table, mounting side on the right Machine can be tilted on both sides from the front via hand crank and worm gear On request, various options are available, e.g., larger cutting height (215 mm and 240 mm), pneumatic material clamping, and laser cutting indicator With appropriate modifications, also suitable for aluminum processing The roller tables, type RLH-ST60 and RO-ST60, can be supplied in longer or shorter versions upon request.

Condition: used, Year of construction: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Nodpfx Ajy Hqdaef Selg Extraction connection: 100 mm Weight: 490 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Nsdpfx Afozu Azdo Sslg Hydraulic feed brake Pneumatic material clamping system, on both sides from above Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Crosscut fence for cutting angled pieces Machine stand

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Nodjy Hmfyspfx Af Sjlg Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.