Used Goedhart** Vcs-145610 for sale (125)

Condition: good (used), Air cooler, cold storage, refrigerated container, cold room -equipped with: 4x fans Iaodpfjb Nx Hmjx Aquju -Cooling capacity: 70 kW -Air flow rate: 39,673 m³/h -Area: 348 m² -Slat spacing: 10 mm -Fan diameter: 500 mm -Lamb spacing: 10 mm -Housing: made of stainless steel -Drip tray -Quantity: 1x cooler available -Price: per piece -Dimensions: 4550/1100/H940 mm -Weight: 600 kg/piece

Condition: used, Two-side evaporator Goedhart -Type: DRS 52504 -Cooling capacity: 22.7 kW -Fin spinning: 4 mm -Fans: 2 x 500 mm -Dimensions: 2260 x 1600 x 530 mm -Stainless steel housing and block -Volume: 28 L -Quantity in stock: 5 -Reference number: CH 571 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work Ijdpfexpughsx Aqueau

Condition: used, Evaporator Goedhart -Type: VNS 65407 E Iaedsyybd Dopfx Aqusu -Cooling capacity: 27 kW at -8°C -Fin spinning: 7 mm -Electric defrost -Fans: 5 x 400 mm -Dimensions: 4200 x 800 x 600 mm -Volume: 44 L -Weight: 310 kg -Quantity in stock: 9 -Reference number: CH 598 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: excellent (used), Two side evaporator GEA KUBA -Type: DRS 34637 -Cooling capacity: 46 kW at DT8 -Fin spinning: 7 mm -Fans: 4 x 630 mm -Dimensions: 4500 x 1450 x 700 mm -Block made of stainless steel -Refrigerant: NH3 -Volume: 54 L -Weight: 580 kg -Quantity in stock: 2 -Reference number: CH 535 Iasdpfx Aov E Hckjquju -Condition: Used in good condition

Condition: used, Two-side evaporator Goedhart -Type: FC38Dp 453-7-230 -Cooling capacity: 25 kW at DT8 -Fin spinning: 7 mm -Fans: 3 x 450 mmm -Dimensions: 2850 x 1050 x 470 mm -Place for electric defrost -Volume: 32 L -Weight: 260 kg -Refrigeration: Freon Iaodoyttc Depfx Aquou -Quantity in stock: 7 -Reference number: CH 596 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: excellent (used), Two side evaporator GEA KUBA Iodpfx Asvw Np Rsqujau -Type: DRS 44637 -Cooling capacity: 60.7 kW at DT8, 58 kW at DT7 -Fin spinning: 7 mm -Fans: 4 x 630 mm -Dimensions: 4500 x 1550 x 700 mm -Block made of stainless steel -Volume: 72 L -Weight: 650 kg -Quantity in stock: 3 -Reference number: CH 535 -Condition: Used

Condition: used, Two-side evaporator Goedhart Iasdpfxey Ifb Ne Aqusu -Type: DVS-p-82637 -Cooling capacity: approx. 43 kW -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 2600 x 1820 x 750 mm -Volume: 76 L -Weight: 470 kg -Quantity in stock: 1 -Reference number: CH 604 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger -Manufacturer: Goedhart, industrial cooler type DVS-O 614010 -Fan diameter: 400 mm -Operating pressure: max. 5 bar -Operating temperature: max. 50°C Iajdsqva Nyepfx Aquou -Dimensions: 1410/1170/H700 mm -Weight: 129 kg

Year of construction: 2007, condition: excellent (used), Evaporator GOEDHART, type VRZ 126310-GFP - 2 identical pcs. in stock. PJV071924-01 and PJV071924-02 Qo=39.3kW, Vo.x=25750 m3/h, F=262m2, 2 fans with diameter 630mm, s=10mm, dimensions of the cooler: LxBxH: 286 х 126 х 111 cm; Coolant (NH3) Very good condition Price Euro 1800 Euro + VAT per piece, negotiable, ExWorks: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare Iedpfx Ajip Ungequeau We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: PJV111654, overall weight: 536 kg, total length: 6,500 mm, total height: 700 mm, total width: 1,050 mm, lamellar spacing: 7 mm, cooling capacity: 63.2 kW (85.93 HP), Used Goedhart VNS 66507 G evaporator on Freon with hot gas defrost. Complete with 6 Ziehl-Abegg fans - 50 Hz - 0,83/0,55 kW - 1330/940 RPM - diameter 500 mm and a total air flow of 42.380 m³/h. Iedpfx Aqev Ua Uxjueau

Condition: used, Year of construction: 2007, Used Goedhart ZFB-1125612 evaporator on NH3 with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 19.200 m³/h. Isdpfx Aqorlk Dgjuoau

Condition: used, Year of construction: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator for Freon/Glycol. Complete with 3 Ziehl-Abegg .A7P2 fans - 50/60 Hz - 1,0 kW - 1550 RPM - diameter 500 mm and a total airflow of 25.000 m³/h. Iedpferlk Dcex Aqueau

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 4, This 4-axis VOORTMAN VCS Thermo was manufactured in 2013. It features a multi-axis automated chamfering/bevel head and is equipped with a Hypertherm HPR260XD plasma source with Truehole technology. The machine includes an integrated Beckhoff operator console and Beckhoff nesting software. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VCS Thermo plasma cutting machine we have for sale. Contact us for further details. - Cutting Head Setup: Multi-axis automated chamfering/bevel head- Plasma Source: Hypertherm HPR260XD with Truehole technology- CNC Control: Integrated Beckhoff operator console- Software: Beckhoff nesting software including security dongle- Extraction Unit: TEKA Cube filter extraction unit- Filter Condition: Minor defect reported; will be repaired and sold in fully operational condition- Additional Equipment: cutting nozzles and two heads Iodozd Abpjpfx Aqujau

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,888 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 200 mm, spindle motor power: 3,700 W, total height: 1,705 mm, total width: 700 mm, overall weight: 1,500 kg, controller manufacturer: MITSUBISHI, controller model: FCA 70 LPC-V (M70V series), product length (max.): 1,683 mm, number of axes: 2, Horizontal turning machine manufactured in 2017. This Citizen MIYANO VC-03 features a maximum turning diameter of 45 mm and a turning length of 50 mm. It includes a rapid traverse rate of 20 m/min for the X-axis and 30 m/min for the Z-axis, along with a robust spindle speed of up to 8000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Citizen MIYANO VC-03 machine we have for sale. Contact us for further details. - Operating Hours (Power ON): 8494 h- Cutting Time / Operating Time: 3888 h- Number of Processed Workpieces: 8536- Input Voltage: AC 200 V, 3 Phase, 50/60 Hz- Rated Power Capacity: 11 kVA- Full Load Current: 32 A- Short Circuit Interrupt Rating: 2.5 kA- Max. Turning Diameter: φ45 mm (High-precision air chuck) / φ40 mm (Draw collet chuck)- Max. Turning Length: 50 mm- Max. Turning Length with Loader: 40 mm (Fixed: 35 mm)- Spindle Nose Form: Extra flat- Max. Spindle Speed: 8000 min⁻¹ (Standard: 60 - 6000 min⁻¹)- Spindle Draw tube ID / Through-hole Diameter: Ø10 mm- Number of Tool Slides: 1- Slide Form: Comb tool type, horizontal- Number of Controlled Axes: 2 Axes (X and Z axes simultaneously)- X-Axis Feed Motor: 2.7 kW- Z-Axis Feed Motor: 5.8 kW- Rapid Traverse Rate (X-Axis): 20 m/min- Rapid Traverse Rate (Z-Axis): 30 m/min- Tool Size / Shank Size: 20 mm (Options: 10, 12, 16)- Number of Tools (Standard): 5- Tool Boring Hole Size: φ20 mm- Coolant Tank Capacity: 90 Liters- Coolant Pump Flow Rate: 110 / 145 L/min (50/60 Hz)- Coolant Pump Power: 0.18 kW- Pneumatic Air Supply Pressure: 0.5 MPa- Lubrication Unit Tank Capacity: 0.8 Liters- Lubrication Pump Type: MLZ (Discharge amount per shot: 1.5 - 2.5 ccm)- Spindle Center Line Height: 875 mm- Loader Type: Gantry Loader (R Type) - 2 controlled axes, 1 slide, 2 grippers- Loader Max. Workpiece Size: φ40 x 40 mm- Loader Max. Workpiece Weight: 250 g- Loader Feed Speed (Left/Right): 108 m/min- Loader Feed Speed (Up/Down): 90 m/min- Loader Drive System: Rack and pinion drive- Automation Equipment optional not included: Feeding system by Fa. Steyer, separating unit/feeding via conveyor belt, discharge conveyor belt with finished part buffer- Included Features: Oscillating cutting (LFV), Pneumatic power chuck, Tool holders, Splash guard interlock, Machine light, Air blow (Tool & Spindle), CE specification, Coolant level switch, Automatic power shut off, LED warning light Iodpfezb Idlex Aqusau Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details. • Programming: Siemens ShopMill-OPERATE (conversational) • Spindle: in-line direct drive (Combi-Drive); pull studs DIN 69872-A Ijdeyifm Djpfx Aqueau • Coolant: Internal coolant supply (IKZ; noted as high-pressure) • Rapid traverse: 36 m/min • Guideways: Linear guides on X/Y/Z • Tool changer: High-speed double-arm, 24 stations; spindle taper blow-out device • Enclosure: Full splash guard housing • Standard equipment: Coolant system, workspace lighting • Installation: Leveling elements included • Finish: Two-tone paint RAL 7035 (light grey) / RAL 5008 (grey-blue) • Condition: Approx. 100 spindle hours (prototype use; like-new) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, controller manufacturer: FANUC, controller model: i Series, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 650 × 375 mm • Spindle Power: 5.5 / 7.5 kW • Total Part Count (Pezzi Totali): 114,937 parts • Operating Time (Tempo Lav): 858 h 41 min 59 sec • Cutting Time (Tempo Taglio): 3,329 h 25 min 12 sec • Power On Time (Acceso): 13,604 h 41 min • Cycle Time (Tempo Cic): 0 h 1 min 59 sec • Documentation: Instruction manuals and CE declaration of conformity included Iedpfx Aey Uwzbsquoau Additional equipment • D'Andrea TRM/50 boring head attachment • Gerardi vise (345 × 120 mm) • Chip conveyor system Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VCS 430A was manufactured in 2014. It features a maximum spindle speed of 12,000 rpm and a table size of 900 x 430 mm. The machine is equipped with a Mazatrol Smart CNC and has a tool capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A vertical machining centre we have for sale. Contact us for further details. • Table size: 900 x 430 mm Additional equipment • On-board tool presetter • Through-spindle coolant (refrigerant inside the spindle) Iasdpsy Ncyfefx Aquju

Condition: ready for operation (used), Year of construction: 2012, Technical data: Product number: V-VC 75 Year of manufacture: 2012 Motor power: 2.2 kW Capacity: 84 m³/h MAX vacuum: 0.2 mbar Noise level: 74 dB Rotational speed: 1500 rpm Iedpfx Aqsy H Swnsusau Weight: 90 kg Dimensions [H x L x W]: 6011 x 281 x 310 mm The pump achieves a vacuum of 0.2 mbar, as confirmed by the sensor measurement shown in the attached video below. A display reading of 2.8 -1 on the sensor means a vacuum of 2.8 x 10⁻¹, which equals 0.28 mbar. After full overhaul/major service The pump is in perfect condition - New oil - New exhaust separators Oil-lubricated vacuum pump, suction unit – a device used in vacuum technology for removing gases (creating a vacuum) in a closed space. Pumps are classified based on their operating principle as: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: - Ultimate pressure (lowest pressure the pump can achieve), - Pumping speed and its dependency on pressure, - Capacity (usually measured in m³ of evacuated gas per unit of time).

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 41 kVA, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 9,271 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – Well-maintained, inspected & ready for immediate use For sale is a Mazak VCS 530C vertical machining center in excellent, well-maintained technical condition. The machine has undergone regular servicing and is in outstanding optical and mechanical shape. It is fully functional, thoroughly checked, and immediately ready for operation. The Mazak 530C stands out with its high-quality features, including a 4th axis, allowing complex workpieces to be machined precisely and efficiently, providing enhanced flexibility. Additionally, the automatic door offers increased user comfort, resulting in reduced setup times and increased safety during operation. The integrated coolant system (KSS unit) ensures optimum chip evacuation, which in turn leads to longer tool life and excellent surface finishes. Combined, these features deliver a powerful package focused on productivity, precision, and reliability. With our all-inclusive service package, we can personally handle the complete process upon request—from delivery to commissioning of your new machine. This includes unloading, placement, and precise alignment of the machining center. Thereafter, our experienced service technicians will carry out professional commissioning, perform all necessary function checks, and ensure that your Mazak VCS 530C operates reliably and accurately. We also offer tailored training programs for your staff so you can make optimal use of the machine from day one. Even after installation, we remain your competent point of contact—whether for maintenance, technical questions, or future upgrades. With our all-inclusive package, you have nothing to worry about—we ensure everything runs smoothly so you can focus completely on your production. Additionally, you can acquire extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units to make your production even more efficient and cleaner. Iaodpfx Aqoy E Hhfeueu Our service commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialized in Mazak machinery and other equipment. We place great emphasis on personal support and are happy to assist you any time, even after your purchase. You are also welcome to inspect and test the machine under power at our facility at any time. You are cordially invited to visit us and see for yourself the condition and functionality of the machine. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All specifications are subject to change without notice.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,800 mm, total width: 2,100 mm, table load: 1,000 kg, overall weight: 6,800 kg, spindle speed (max.): 10,000 rpm, tool weight: 7,000 g, product length (max.): 2,900 mm, number of axes: 3, This 3-axis TBI VC 1060 HH was manufactured in 2020. It features an X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1100 x 500 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the TBI VC 1060 HH vertical machining centre we have for sale. Contact us for further details. • Rigid tapping (no compensation holder required) • Manual handwheel • Table size: 1100 × 500 mm • Distance spindle to table: 150–800 mm • Through-spindle coolant: 20 bar • Coolant tank capacity: 330 l; flow: 200 l/min • Rapid traverse (X/Y/Z): 36 / 36 / 36 m/min • Positioning accuracy: ±0.005 mm • Repeatability: ±0.003 mm • Linear guideways X/Y/Z (roller type) • Telescopic covers for X/Y/Z axes • Pneumatic counterbalance on Z-axis • Digital axis drives Ijdpfxoyyxqhj Aqueau • Tool magazine: 24 positions (SK40), double arm • Max tool diameter: 80 mm; max tool length: 300 mm • Tool change time: 1.5 s (fast double-arm tool changer) • Spindle temperature stabilization • Spindle air purge system • Tool cooling: air and coolant • Central lubrication system • Electrical cabinet cooling • Data interface: V.24 / RS232-C / USB • Chip flushing system (bottom) • Total power: 35 kVA Additional equipment • Integrated chip conveyor with bin • Oil skimmer Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 4, This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details. • Working area: 3000 mm (length) x 1500 mm (width) • Machine structure: Heavy steel frame construction; portal gantry design • Material support: Sectional support bed • Plasma cutting unit: Kjellberg HiFocus 280i • Max plasma thickness: up to approx. 70 mm Isdpfx Aeyu Th Asqujau • Cutting capacity (steel): 6 / 12 / 20 / 25 / 30 / 40 / 50 / 70 mm • Cutting speed range: approx. 0–5200 mm/min • Positioning speed: approx. 12,000 mm/min • Positioning accuracy: ±0.1 mm • Control system: VACAM CNC control • Software: VACAM Machine Edition; VACAD; VANEST • Industrial PC: Intel Core 2 Duo; 2 GB RAM; SSD storage; Ethernet connection; touchscreen monitor; keyboard; USB ports • Automatic torch height control: HT4000 PCS • Laser pointer: Yes • Electrical connection: 230 V, 1 phase, 50 Hz • Compressed air requirement: Operating pressure approx. 6 bar • Noise level (idle): approx. 70 dB • Safety equipment: Emergency stop buttons; emergency stop cable; protective safety systems • Material types: Steel; structural steel; sheet metal Additional equipment • TEKA Filtercube 4H extraction unit (filter system)

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 6800 kg Measurements height 2808 mm Dimensions Machine Length 2929 mm Isdpfxjx E Edxe Aqueau Table Table load 1200 kg Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 18.5 kW Movement X-Axis Movement 1050 mm Z-Axis Movement 510 mm Y-Axis Movement 530 mm Tools Max weight 8 kg This 3-axis Mazak VCS 530C vertical machining centre was manufactured in 2014. It features a table size of 1300x550 mm, X/Y/Z travels of 1050/530/510 mm, and a maximum spindle speed of 12000 min⁻¹. The machine supports a table load up to 1200 kg and includes a 30-tool magazine with a rapid tool change time of 2.8 seconds. Consider the opportunity to buy this Mazak VCS 530C vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, total height: 2,500 mm, total width: 1,800 mm, table load: 250 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, product length (max.): 2,400 mm, This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details. • Condition: Operational; reportedly very low usage • Control: To be confirmed • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s • Coolant system: 250 L • Spindle hours: Unknown (reported very low) Additional equipment Iedpfsykt T Djx Aqueau • New 4th axis (included, never installed, unused, still in box) • Complete tooling set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Technical Specification Taper Size SK 40

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 - Spindle speeds : 12.000 [rpm] - Spindle power : 18,5 [kW] LINEAR AXES - Travels on X/Y/Z axes : 1050 / 530 / 510 [mm] - Rapid traverses rates (X/Y/Z) : 42 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 8000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 1300 x 550 [mm] - Maximum weight upon table : 1200 [kg] - Distance table / spindle nose (min./max.) : 150 - 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41.15 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.880 x 2.950 [mm] - Machine height : 2.808 [mm] - Machine weight : 6800 [kg] MACHINE HOURS - Number of hours under power : 16317 [h] - Number of working hours : 3904 [h] EQUIPMENT - CNC : MAZATROL MATRIX NEXUS 2 - Interface : PCMCIA / RS232 Iajdpfxsycxuds Aqueu - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Tool probe - Workpiece probe

Condition: excellent (used), Vötsch Iedpeygvn Njfx Aqusau Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With temperature change rate of 5 K/min Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation in the center of the usable space: ±1% to ±3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) Exterior dimensions (W x D x H): 870 x 1700 x 1775 mm Test chamber dimensions (W x D x H): 580 x 765 x 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm and 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-side fuse: 63 A slow-blow Refrigerant: R404A / R-23 Weight approx. 570 kg For your security as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) Further questions can be answered by phone.