Used Froehling Pinch Roll Unit/Strip Leveller/Crop Shea for sale (41,046)

Year of construction: 1980, condition: used, strip width 120 - 300 mm strip thickness 1 - 5 mm reference material (tensile strength) 800 N/mm² Iedpfx Aelil Epeg Ieat

Year of construction: 1980, condition: used, strip width 120 - 300 mm strip thickness 1 - 5 mm Ijdpfxjbidc Ue Ag Ioat reference material (tensile strength) 800 N/mm²

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 Ijdexc Hr Ajpfx Ag Ijat control as new

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 Iedpfsxc Htmjx Ag Ieat control as new

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 Iaodpoxc Ht Tjfx Ag Iot control as new

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 Iaodpsxc Hytofx Ag Iot No. of pinch rolls: 2 revised 1995

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995 Iaedpfxsxc Hygo Ag Ijt

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm Isdpfx Aoxc Hyyog Ioat speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm Iaedpogryl Asfx Ag Iet No. of pinch rolls: 2

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm No. of pinch rolls: 2 Isdpjgm E Rdefx Ag Ieat

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm Iaedogm E Rlspfx Ag Ist No. of pinch rolls: 2

Year of construction: 1983, condition: good (used), strip width 1.600 mm strip thickness 0,3 - 3 mm Iajdpfx Agobidg Eo Ijt reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length

Condition: excellent (used), Year of construction: 1980, strip width: max. 1.750 mm strip thickness: 0,5 – 3 mm speed: max. 160 m/min Iaodpfoxaz Sfex Ag Ijt No. of pinch rolls: 2

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm Isdou Ic Ewopfx Ag Isat dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: good (used), Manufacturer: Festo Machine Type: RSTC-U W40/7/500GL Overall size: 1600 x 900 x 1800 mm Iodpfx Aehwta Eeg Isat Plate width: 500 mm Number of castors: 6 Voltage: 380 V

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, type of input current: three-phase, Fortuna Primus K4 – 4-row roll production line – Pinning + Depositing + GEK Year of manufacture: 2011 Dough divider & rounder Condition: Fully operational, straight from ongoing production Applications: Bread rolls, Kaiser rolls, braided rolls, salted rolls, wheat & mixed doughs • Weight range: approx. 60–120 g • Hourly output: approx. 4,800 pcs/h • Moulding chamber height: approx. 10–35 mm • Moulding speed: Scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connected load: approx. 1.5 kW • Machine weight: 650–700 kg • Depositing: for 60×80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine Iajdpfx Agsy St U Se Iot • 4-row configuration • GEK intermediate proofer suitable for the line • Pinning/stamp sets: Kaiser roll, braided roll, salted roll • Complete depositing system • Ready for immediate operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics upgraded (new display) VIEWING and TEST RUN only possible by appointment.

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Noise level: 68-72 dB(A) Colour: blue, RAL5010 Including the following accessories: Iaedpfoy Sbc Rex Ag Iet Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options.

Condition: excellent (used), Year of construction: 2006, number of straightening rollers: 19, straightening roller diameter: 55 mm, working width: 1,600 mm, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm Ijdjy Nxv Njpfx Ag Ioat design: 6 hi/cassette No. of levelling rolls: 19 levelling roll Ø: 55 mm intermediate roll Ø: 30 mm

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine Ijdpfxey Azgwj Ag Ieat 2,500mm x 50mm plate capacity Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Iaodpfx Ajh U Rzgsg Iet Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, For sale: GSW decoiler and GSW straightening machine. Both units are in good used condition (on the decoiler, the motor brake is defective). Decoiler: GSW Serial No.: AHM 1000 433 Load capacity: 1,000 kg Max. coil diameter: 720 mm With arm extension: 1,120 mm Defect: motor brake (out of tolerance) Price: €3,500 negotiable Iaedsyxbmpspfx Ag Ijt GSW straightening machine: Serial No.: RMA 32 / 114 Max. sheet width: 290 mm Price: €3,500 negotiable Further information and technical details on the equipment are available upon request.

Condition: excellent (used), 13 rolls, Ø 150 mm Iaodpfxjv S Ad Do Ag Ist strip width: 600 - 2.000 mm strip thickness: 6 - 15 mm design: 4 hi cassette

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. Iedpfovptz Isx Ag Ieat This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Year of construction: 1978, condition: good (used), 17 rolls, Ø 66 mm strip width: max. 1.650 mm strip thickness: max. 3,5 mm Iedpfxsbifp Us Ag Isat

Condition: good (used), 5 rolls, Ø 100 mm Iedpfx Agsgq D Acs Isat strip width: 50 - 530 mm strip thickness: max. 5 mm