Used Flow Flow Mach 100- 4020 for sale (45,359)

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Technical data Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Ndodpfx Aohw Nfqohksa Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) Ndjdpfsx Sz A Rox Ahkoa • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided Nsdey Urziopfx Ahkoda – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,900 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 178 mm, table length: 4,000 mm, table width: 2,000 mm, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, rapid traverse Z-axis: 12,700 m/min, 💧 FLOW MACH 4 4020 – 5-Axis Waterjet Cutting Machine Year of manufacture: 2015 Working area: 4000 × 2000 mm (4 × 2 m) Cutting head: 5-axis (XD/dynamic bevel head) Pump hours: approx. 9,000 h Condition: Very good Service status: Regularly serviced, fully operational 🔧 Machine Overview The Flow Mach 4 4020 is a high-performance industrial waterjet cutting system tailored for demanding production environments. With its 5-axis XD cutting head, it enables dynamic bevel cutting, taper compensation, and precise 3D geometries—ideal for accuracy-driven and advanced applications. Despite its year of manufacture, the machine is in outstanding technical condition and has received professional, scheduled maintenance throughout its lifespan. All servicing has been performed on time, guaranteeing reliable, stable operation. ⚙️ Key Features - Working area: 4000 × 2000 mm - 5-axis XD cutting head – enables bevel cutting and taper compensation - Robust gantry construction for high precision Nedpfx Ahoyaiqqoksda - Industrial CNC control system - Capable of processing metals, stone, composites, glass, and technical materials 💦 High-Pressure System - Pump operating time: approx. 9,000 hours - Pump and high-pressure components serviced in accordance with manufacturer guidelines - Stable pressure and consistent cutting performance ✅ Condition & Maintenance - Machine in very good overall condition - Continuously maintained during operation - No outstanding maintenance tasks - Ready for immediate integration into production 🎯 Summary This Flow Mach 4 4020 represents a well-maintained, proven industrial waterjet cutting solution with powerful 5-axis capability. It offers an excellent opportunity for companies seeking a dependable, high-precision system without the cost associated with new equipment. 📩 Contact us for further technical information, additional photos, or a customized commercial quotation. Included equipment: - Abrasive delivery system - Special tool for pump cylinder disassembly (FLOW hydraulic wrench) - Various spare parts The machine is fully functional, features low operating hours, and is immediately ready for use. It is the ideal solution for organizations seeking a reliable, large-format waterjet cutting system—including all essential accessories.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Ndsdpfx Ahszhkmuokea Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: good (used), Year of construction: 2013, operating hours: 18,600 h, functionality: fully functional, water pressure: 4,000 bar, Waterjet FLOW MACH 3 Ndsdpfx Ajwmcmtohkoa Year of production: 2013 Working area: 3000x2000 Working hours: 18600 Advantage of the machine DWJ - automatic compensation of the verticality of the cut Availability: 6 months Location: Croatia Parity: EXW Belišće

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area Ndjdpevvl Ugofx Ahkoa • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Application Types Cutting Ndedox D Rxpepfx Ahksa

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Nsdeyz Dhzspfx Ahkjda Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones. Ndedpfjzdtquox Ahkea

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series Oi-MB, total height: 2,200 mm, total width: 2,500 mm, table load: 850 kg, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 3,200 mm, number of axes: 3, This 3-axis MIND MACH T. VMC 1000/A was manufactured in 2007. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the MIND MACH T. VMC 1000/A vertical machining center we have for sale. Contact us for further details. Ndjdpfx Ajy T R Hbohkoa • Rotary table: No • Table size: 1200 x 600 mm Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Professionally designed crossflow ultrafiltration membrane system, engineered, built, and fully instrumented by a membrane specialist. 12 membrane modules in 3 parallel stages of 4 modules each, active membrane area 2.16 m². PVDF ultrafiltration membranes, separation limit 100 kDa, in PVC module tubes. Membrane stages can be individually shut off. Designed for diafiltration and pure concentration. Hygienic centrifugal pump, approximately 11 m³/h at approximately 2.5 bar feed pressure, crossflow up to 2.5 m/s. Retentate-side pressure adjustment via automatic proportional valve, stainless steel heat exchanger for temperature control. Ideally operated in conjunction with two feed tanks. Technical data: - Total membrane area: 2.16 m² (12 modules, 3 stages of 4) - Membrane type: PVDF-UF, separation limit 100 kDa; module tubes PVC, stages can be individually shut off Nedpfx Aezmapvehkjda - Circulation rate: approx. 11 m³/h at approx. 2.5 bar; crossflow up to 2.5 m/s - Permeate rate: 20–120 l/h·m² (depending on suspension/concentration) - Interfaces: Inlet/Outlet, each DN50 (DIN 11851) - Instrumentation: Flow rate (feed/permeate), pressure and temperature sensors, proportional valve, stainless steel heat exchanger - Commissioned in June 2023; well-maintained, operational condition, regularly CIP-cleaned (last cleaning on 02/02/2026) More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the client through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: refurbished (used), Year of construction: 2011, operating hours: 15,620 h, functionality: fully functional, center width: 1,400 mm, center height: 500 mm, center height in crank: 500 mm, spindle motor power: 30,000 W, total length: 4,560 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 2,200 rpm, quill diameter: 70 mm, quill stroke: 750 mm, feed force X-axis: 65,000 N, feed force Z-axis: 65,000 N, feed length X-axis: 310 mm, feed length Z-axis: 600 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, workpiece weight (max.): 1,100 kg, input voltage: 400 V, power: 45 kW (61.18 HP), warranty duration: 12 months, The machine is in very good condition and has been completely overhauled by us. We offer a 12-month warranty. We would also be happy to provide installation, commissioning, and training services. Ndsdpfxjzluh Ro Ahkja Training in metal forming or product development is also available and offered separately. The machine is equipped with a Sinumerik 840 D CNC control system, including playback software.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. Nsdpfxezr H Aas Ahkjda The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: used, Year of construction: 2001, MACH MIND VMC 1000 - A MACHINING CENTER CNC FANUC SERIES O – MD TABLE SIZE: 1,200 mm x 600 mm MAXIMUM ALLOWED TABLE LOAD: 850 KG TRAVELS: X: 1,020 mm Ndjdpfxeyuqape Ahkoa Y: 610 mm Z: 610 mm MAX. DISTANCE TABLE – SPINDLE: 135 – 745 mm SPINDLE TAPER: BT 40 SPINDLE SPEED: 60 – 8,000 RPM TOOL MAGAZINE: 24 POSITIONS CHIP COLLECTION TANK WEIGHT: 6,000 KG COMPLETE WITH FULL DOCUMENTATION YEAR: 2001

Condition: used, This listing is for Quattro Fluid SystemFlow 1000S Nedoxhfp Ropfx Ahkoda The unit is in full working condition and ready for immediate use This four-piston quaternary diaphragm pump offers gentle, low-pulsation fluid transfer ideal for delicate biological materials, proteins, and cell suspensions in bioprocess applications

Condition: used, functionality: limited functionality, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Ndsdpfszivhtjx Ahksa Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Ndsdpfxozucxco Ahkoa Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 4052, Horizontal flow pack packaging machine sold with: - Conveyor - Labeling machine - Inkjet printer Very little used, in excellent condition. ALL WRAP RCN270 packaging machine, year 2012 Linear speed: up to 25 m/min Bag width: from 30 to 270 mm Bag length: from 50 mm to unlimited Product height: up to 25 mm Production rate: up to 150 cycles/min per lane Reel diameter: 400 mm (standard) AVERY DENISON labeling machine, type ALX 734LH: Print speed: 50 to 400 mm/s Max print width: 104 mm Ribbon width: 20-140 mm Label output: up to 400 labels Label width: 30 to 134 mm Label length: 25 to 225 mm Core diameter: 38, 76, 102 mm Roll diameter: 300 or 400 mm DOMINO A320i inkjet printer Conveyor: Conveyor belt width: 100 mm Nodpfx Aey A Hf Sohkjda Conveyor belt length: 2000 mm Dimensions: 2000x595 H 1240 mm

Condition: used, Year of construction: 2002, total height: 2,400 mm, total length: 2,000 mm, total width: 950 mm, Colour: Blue Weight: 1.500 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AY11051 - Saw direction: vertical - Main motor power [kW]: 15.0 - Wheel diameter [mm]: 915 - Max. cutting to feed roller opening [mm]: 230 - Max. cutting to stop opening [mm]: 260 - Max. cutting width to column [mm]: 300 - Max. total opening [mm]: 480 - Max. cutting height [mm]: 330 - Table width [mm]: 1010 - Table length [mm]: 740 - Max. band saw width [mm]: 100 - Min. band saw length [mm]: 5385 Ndodpfx Aszudb Eohksa - Max. band saw length [mm]: 5485 - Min. band saw thickness [mm]: 0.8 - Max. band saw thickness [mm]: 1 - Feed roller type: Manual - Extraction port diameter [mm]: 150 - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.0 - Transport dimensions: 2000mm x 950mm x 2400mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1984, total length: 1,800 mm, total width: 1,250 mm, total height: 2,100 mm, Colour: Beige Empty weight: 2.250 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 12873 - Drive system: Conventional - Drive: Hydraulic Nodpfx Aeztcqpjhkeda - Punching force [ton]: 100 - Punch throat depth [mm]: 300 - Punch speed [rpm]: 28 - Notching width [mm]: 250 - Max. plate thickness notching [mm]: 16 - Round bar cutting capacity [mm]: 50 - Shearing width [mm]: 600 - Max. plate thickness shearing [mm]: 20 - Options: Length stop - Transport dimensions: 1800mm x 1250mm x 2100mm (l x w x h) - Transport weight [kg]: 2250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2001, Used Ecotack thermal laminating machine Maximum sheet format: 102x142 cm Maximum speed: 75m/ minute Complete with vacuum register station Ndodjzt R Enepfx Ahksa Calender diameter: 450mm with oil heated central Roll elevator Automatic separator Spared rubberized roller Automatic separator Cooling roller with refrigerator Corrugated for light paper Automatic stacker

Condition: used, Year of construction: 1993, total length: 2,360 mm, total width: 1,450 mm, total height: 1,820 mm, For sale: Simo deboning machine, type HD 100/225, year 1993. Serial no.: 93-08702. Dimensions: 2360x1450x1820 mm. Hopper: 1120x940 mm. Net price: €9,000. Price negotiable. Nsdpfx Aey Hizkshkoda

Condition: excellent (used), Machining Center MASTERWOOD TF 100 2.0 -used- Through-feed processing, Ball screw spindles on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measuring sensor, New drill set, New grooving saw blade, Clamex option available, Door processing option available ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles in X-direction: 2 pcs, Number of horizontal double drilling spindles in Y-direction: 1 pc, Saw blade diameter of saw unit: 120 mm, Number of tools in the changer: 6 pcs, Nodpfx Ahey Eylwokeda Extraction port diameter: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Quality Information: - Full basic cleaning - Electrical system checked - Pneumatic system checked - Set according to manufacturer's specifications - Immediately ready for operation

Condition: ready for operation (used), Year of construction: 2012, Offered is a horizontal flow wrap packaging machine (HFFS). Material types: heat-sealable films (BOPP, PET/PE, Alu/PE), cold-seal films, film width max.: 500mm, roll diameter max.: 350mm, core holder: 75mm, product dimensions X/Y/Z: 40mm-350mm/10mm-220mm/0mm-100mm, production output: 120-150bags/min. Viewing possible by appointment. Nsdpfx Aoy Ax Ulehkoda