Used Feutron 3702/06 for sale (5,256)

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Ibedpfxjzd Sdms Ahyjc Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Isdpozd Sdgofx Ahysbc Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: good (used), Feutron Temperature Testing Chamber -40 to +100°C The Feutron TPK 3403/125, thanks to its robust design, is a reliable workhorse for standardized temperature tests. The main application areas for this model are: Isdpfx Ahsy Nynaoyjbc 1. Electronics and Component Testing This is the most common application. It involves testing how components react to extreme temperatures: Functional testing: Does the circuit board still function flawlessly at -40 °C or +150 °C? Burn-in tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. 2. Material Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp in the heat? Storage tests: How stable do chemical substances or adhesives remain over long periods at a constant temperature? 3. Quality Assurance (QA) Sample testing: Tests carried out during production to ensure that the production process meets the specified temperature ranges. Standard testing: Conducting tests according to common industry standards (e.g., DIN EN 60068), which prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power connection: 220/280V-3-50Hz Supply line fuse: 25 A Protection class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, FEUTRON Ibsdpfez Hl Dvox Ahysc Temperature Test Chamber / Climate Simulation Chamber Feutron 3416/16-Ex / TPK 200 Temperature range: -75 °C to +150 °C Water-cooled cascade refrigeration system For sale is a used temperature test chamber from the manufacturer Feutron Klimasimulation GmbH. The temperature test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Feutron Klimasimulation GmbH Type: 3416/16-Ex Series: TPK 200 Device type: Temperature test chamber Test chamber volume: 280 liters Temperature range: -75 °C to +150 °C Temperature deviation over time: ≤ ±0.5 K Temperature change rate: Heating: up to approx. 3.0 K/min on average Cooling: up to approx. 1.0 K/min on average Test chamber material: Stainless steel, material no. 1.4301 Test chamber insulation: CFC-free multi-layer insulation Number of shelves: 3 Lighting: 50 W Refrigeration system: Water-cooled semi-hermetic cascade system Refrigerant 1: R507 Refrigerant quantity: 2.5 kg Refrigerant 2: R23 Refrigerant quantity: 0.5 kg Cooling water connection: Cooling water pressure: min. approx. 2.0 bar / max. 6.0 bar Max. cooling water temperature inlet: approx. 18 °C Cooling water temperature outlet: approx. 30 °C Cooling water consumption on average: approx. 0.3 m³/h Power connection: 400 V / 3/N/PE AC / 50 Hz Max. simultaneous power consumption: 5.6 kW Fuse: 3 × 16 A, characteristic C Protection class: IP20 Feedthroughs: 1 × Ø 75 mm with cover cap 2 × Ø 75 mm on the side 1 × Ø 100 mm on the side Dimensions: approx. 1,500 × 1,075 × 2,140 mm (W × D × H) Weight: approx. 680 kg Equipment: Programmable Feutron control system LCD display Program and manual operation Up to 20 programs can be stored RS-232 interface Temperature monitoring 3 stainless steel shelves Test chamber lighting Observation window Several feedthroughs for test specimens Compressed air connection Cooling water supply and return Additional temperature controller Accessories according to images Areas of application: Temperature testing Environmental simulation Material testing Electronics testing Component testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Device starts Control system and display are active Optical condition according to images Scope of delivery: 1 × Feutron 3416/16-Ex temperature test chamber 3 × stainless steel shelves Fan / accessories according to images Documentation according to images The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Ijdpfey E Ilxjx Ahyebc Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Number of shelves: 3 units Maximum permissible load: 90 kg, evenly distributed across 3 shelves Maximum load per shelf: 30 kg Test chamber material: Stainless steel Wst.-Nr. 1.4301

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 20 h, machine/vehicle number: 2306267, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: P40T, working width: 3,100 mm, cutting angle (min.): 1.5 °, stroke rate (min.): 18 1/min, stroke rate (max.): 23 1/min, sheet thickness (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table height: 865 mm, back gauge adjustment: CNC-controlled, back gauge: 1,044 mm, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, operating pressure: 220 bar, overall weight: 6,400 kg, total length: 4,630 mm, total width: 2,965 mm, total height: 1,990 mm, number of support arms: 14, pump pressure: 220 bar, Equipment: documentation/manual, emergency stop, foot remote control, For Sale: LeMans Hydraulic Guillotine Shear B 06-3100 (2023) Like-new condition with only ~20 operating hours. Equipped with an automatic backgauge controlled via a modern ELGO P40T touchscreen, allowing quick and precise cutting length adjustments. Ijdpfex An D Tox Ahyebc Features include 3100 mm cutting length, 6 mm max thickness, 11 kW motor, 220 bar hydraulic system, and 400V / 3-phase power. Extremely solid 6400 kg construction ensures high precision and stability. Ideal for workshops seeking a powerful, nearly unused hydraulic shear with modern controls.

Condition: ready for operation (used), Heidenhain .344 712-01 A5 card, 323257-06, serial number 10454064A. Circuit board, used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Isdpfx Aez Tbfkohyjbc

Condition: not inspected (used), functionality: unexamined, Year of construction: 1994, machine/vehicle number: 7099, overall weight: 2,000 kg, total length: 5,600 mm, total width: 700 mm, total height: 1,600 mm, TRANSFLURID DB 2060 pipe bending machine Iodpfoz Sprcox Ahysbc - Bending capacity: 20 - 60 mm FCA D-35614 Aßlar - loaded onto a truck.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 6.922.191.908, controller model: Cybelec D-Touch 7, working width: 4,100 mm, sheet thickness (max.): 6 mm, overall weight: 10,470 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Iodpfxjz Nippo Ahyebc Max. working width: 4,100 mm Type of back gauge: Electric Back gauge depth: 1,000 mm MACHINE DETAILS Control system: CNC Control system brand: Cybelec Control system type: D-Touch 7 Drive type: Hydraulic Power: 11.0 kW Dimensions & Weight Dimensions (L x W x H): 5,100 x 2,300 x 2,400 mm Weight: 10,470 kg Transport packages: 1 unit EQUIPMENT Pneumatic sheet support system Fixed finger guard with flip-up protection Ball-bearing table Angle adjustment: Motorized Cutting clearance adjustment: Motorized CE marking

Condition: used, axle configuration: 1 axle, first registration: 10/2026, color: other, Year of construction: 1997, Empty weight: 4.740 kg Ibsdoz H Ul Aspfx Ahysc Axle 1: left 12 mm right 12 mm Axle 2: left mm right mm Axle 3: left mm right mm

Year of construction: 2018, condition: good (used), ASYS TDM 06 * Year of manufacture: 2018 * Dimensions (L × W × H): 1,590 × 1,000 × 950 mm * Transport height: 850 mm * Overall height including signal light: 2,050 mm * Weight: 235 kg * Passageway width: 790 mm * PCB size: 70–460 × 50–460 mm * PCB thickness: 0.8–4.5 mm * PCB weight: 0–3 kg Ibsdpozqbkvofx Ahyjc * Maximum component height: ±40 mm * Power connection: 230 V / 50 Hz * Pneumatics: 6 bar supply pressure, 5 bar working pressure, oil-free compressed air * Sound pressure level: < 75 dB(A) * Complete documentation available

Condition: good (used), Year of construction: 1987, operating hours: 800 h, functionality: unexamined, 1pc. Cam-controlled multi-spindle automatic lathe Schütte AF51 Series 09-06 Year 1987 8-spindles ø max. 51mm. 1pc. IEMCA PRA bundle loader (interface available) Ibedpfxeu Edp Sj Ahyjc 33 different cam sets included (see accessories list for details) 1 pc. Balluff Mini Controller BMC 1 pc. Chip conveyor 10 different change gear sets (see accessories list for details) 8 ø28mm round collets (see accessories list for details) Paint finish light blue & light gray

Operating hours: 3,822 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 2,844 mm Fork length: 1,150 mm Initial lift: Yes Battery voltage: 24 V Battery capacity: 240 Ah Battery voltage in idle state: 24.6 V Operating hours: 3,822 h MACHINE DETAILS Manufacturer: Linde Type: L16i Year of manufacture: 2019 Mast type: Duplex Length: 2,200 mm Width: 800 mm Height: 1,915 mm Weight: 1,300 kg Ibjdpoz R D Nyjfx Ahysc EQUIPMENT Initial lift for simultaneously lifting 2 pallets Increased ground clearance for uneven floors Formerly a Linde full-service machine All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of non-timely collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 375

Condition: refurbished (used), Year of construction: 1973, functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Ibedpfx Ahstqf Dbsyjc Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Test books, tools, drawings available!

Condition: good (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, Hezinger B 06 - 4000 hydraulic guillotine shear, year of manufacture: 2024, NC control ELGO P 40 T with touch screen, sheet thickness at 400 N/m²: 6 mm, sheet thickness at 700 N/m²: 4 mm, cutting angle: 1.5°, stroke rate: 13 / min, throat depth: 250 mm, 18 hold-downs, backgauge: 1,000 mm, traversing speed: 80 mm/s; accuracy: +/- 0.1 mm, cutting gap adjustment, cutting length limitation, Ibjdpjyxgbxsfx Ahyec controlled backgauge, cutting line illumination with shadow, max. cutting capacity: 6 mm, max. hydraulic pressure: 220 bar, machine weight approx. 11,000 kg, max. cutting length: 4,000 mm,

Condition: used, functionality: unexamined, Ferwood Code: RU0012132 - Manufacturer Code: 4-086-06-3073 - Condition: Used - Functionality: Not tested - Compatible Machine: HOMAG - If interested, we offer a refurbishment service, please contact us. Ijdpfx Ahezmhzgsyjbc

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 32231, control type: CNC control, sheet thickness (max.): 6 mm, LVD MVS 6/4050 Guillotine Shear / Sheet Metal Shear – Year of Manufacture 2008 For sale is a robust and reliable guillotine shear from the renowned manufacturer LVD. Technical Data: Manufacturer: LVD Company n.v. Model: MVS 6/4050 Year of Manufacture: 05/2008 Maximum Cutting/Pressing Force: 197 kN Max. Sheet Thickness / Capacity: approx. 6 mm (typical for the model, depending on material) Working Length: approx. 4050 mm Max. Force: 10,000 daN Connection: 400 V / 50 Hz Power: 10.1 kW Description: The machine is in good used condition and is fully functional. It is ideally suited for precise cutting operations in steel and metal construction as well as industrial sheet metal processing. Its solid construction ensures high cutting quality and long service life. Features / Highlights: Industrial design High cutting accuracy Easy to maintain Proven LVD quality Fields of Application: Metal construction Sheet metal processing Workshops & production Ibedpfx Asywpkaohyec Viewing by appointment. The machine is currently inbound from England. Export, import, and transport can be arranged by us for an additional fee.

Operating hours: 4,538 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 2,844 mm Fork length: 1,150 mm Operating hours: 4,538 h MACHINE DETAILS Year of manufacture: 2019 Manufacturer: Linde Type: L16i Own weight: 1,300 kg Overall length: 2,200 mm Overall width: 800 mm Overall height: 1,915 mm Battery voltage: 24 V Battery capacity: 375 Ah Battery year of manufacture: Week 35/2019 Battery voltage in idle state: 24.8 V EQUIPMENT Initial lift Integrated scale Ibsdez R D Ehopfx Ahysc Battery charger Previously a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 316

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 500 kg, total height: 2,750 mm, total width: 1,200 mm, total length: 1,400 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, overall weight: 1,800 kg, input voltage: 230 V, table width: 700 mm, table height: 600 mm, table length: 1,000 mm, year of last overhaul: 2026, maximum load weight: 500 kg, Equipment: documentation/manual, Nikon LKV 10.7.6 – complete 3D measuring system with scanner and probe For sale: Nikon LKV 10.7.6 in very good condition, complete with a Nikon LC15Dx 3D laser scanner and a Renishaw TP200 probe system. The combination of scanning and probing makes this measuring machine very versatile. The LC15Dx scanner is ideal for quickly and digitally capturing complex shapes and surfaces. This allows large amounts of measurement points to be collected in a short time, enabling efficient mapping of shape, contours, and deviations. The TP200 probe is suitable for highly accurate contact measurements, for example, of holes, surfaces, edges, and other geometric features. This allows both freeform shapes and critical dimensions to be accurately checked. With PolyWorks software, this machine is very easy and quick to program, so that measurements from both the probe and the scanner can be performed together in one program and included in the same report. The machine is offered complete, including: New PolyWorks|Inspector license High-end workstation computer Complete installation and configuration with calibration according to ISO-10360 Training and explanation Delivered ready for use A complete solution for 3D inspection, dimensional control, and quality control, allowing you to both scan quickly and probe with high precision. The machine is in very good condition and can be viewed and demonstrated by appointment. You are welcome to come and see the machine and discuss its capabilities. Iedpjzvyrcefx Ahyebc Please feel free to contact us for more information or to schedule an appointment.

Operating hours: 13,483 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,600 kg Mast Mast type: Triplex mast with full free lift Lifting height: 5,255 mm Forks Fork length: 1,200 mm Fork positioner: hydraulic Side shifter: included Hydraulics Additional hydraulics: 3rd and 4th valve Drive and battery Ibodpfoz R Dw Rox Ahyec Drive type: Electric Battery voltage: 48 V Battery capacity: 500 Ah Battery manufacturer: Hawker Battery date: 05/26/2026 (?) Battery resting voltage: 50.1 V MACHINE DETAILS Manufacturer: Linde Type: E16-02 EVO Year of manufacture: 2017 Operating hours: 13,483 h Own weight: 3,400 kg Overall length: 3,200 mm Overall width: 1,150 mm Overall height: 2,321 mm Service valid until: 06/2027 UVV (Industrial Safety Regulations) valid until: 05/2027 (?) EQUIPMENT Full cabin Heater Windshield wiper Facelift model with tilt angle indicator LED work light front LED work light rear Safety light rear Comfort seat with lumbar support Seat heating Previously a Linde full-service unit All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not completed on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 154

Condition: ready for operation (used), machine/vehicle number: 90-58-07, functionality: fully functional, planing width: 240 mm, overall weight: 4,200 kg, spindle diameter: 50 mm, planing height: 240 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 120 mm Infeed table length: 1,440 mm Number of spindles: 6 pcs. Spindle diameter: 50 mm Iodpez Ni Edjfx Ahyobc Planer shaft speed: 6,000 rpm Max. planer block diameter: 200 mm Spindle 1 Spindle position: Bottom Motor power: 7.5 kW Spindle 2 Spindle position: Right Motor power: 7.5 kW Spindle 3 Spindle position: Left Motor power: 15 kW Spindle 4 Spindle position: Top Motor power: 15 kW Spindle 5 Spindle position: Top Motor power: 11 kW Spindle 6 Spindle position: Bottom Motor power: 15 kW Conveyor motor power: 5.5 kW Conveyor drive: Cardan drive Feed speed: Manual Min. feed speed: 5 m/min Max. feed speed: 35 m/min Feed speed control: Stepless Diameter of feed rollers: 1,400 mm Diameter of extraction nozzle: 150 mm MACHINE DETAILS Voltage: 400 V Current consumption: 128 A Power: 80 kW Dimensions & Weight Dimensions (L x W x H): 1,900 x 3,900 x 1,800 mm Weight: 4,200 kg Transport packages: 1 pc. EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5511141, cutting width (max.): 550 mm, Cutting machine EBA 551-06 LT, working width 55 cm, with light barriers, air table, program control, rear table cover, year of manufacture 2011, machine number 5511141, in good condition, immediately available. Ijdpfx Ahjzkcgljyjbc If you are interested, we will be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility, subject to prior appointment.

Operating hours: 3,380 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 2,000 kg Forks Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery voltage at rest: 24.7 V Operating data Ibodpsz R D Hrsfx Ahyoc Operating hours: 3,380 h MACHINE DETAILS General Manufacturer: Linde Type: T20AP Year of manufacture: 2020 Own weight: 900 kg Dimensions Overall length: 2,000 mm Overall width: 800 mm Overall height: 1,400 mm Inspection UVV valid until: 06/2027 (?) EQUIPMENT Safety light at the front Safety light at the rear All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 342

Condition: used, mileage: 603,000 km, first registration: 09/2026, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, Year of construction: 2013, Axle 1: left 14 mm right 14 mm Axle 2: left 7-7mm right 7-7 mm Axle 3: left mm right mm Ibodpfx Ahozzi Rreyec

Year of construction: 2018, condition: ready for operation (used), Comp Air screw compressor incl. refrigeration dryer Comp Air screw compressor L 06 5.5 kW Year of manufacture: 2018 10 bar Iedey Amknopfx Ahyobc Delivery rate: 0.67 m³/h Refrigeration dryer PT 9