Used Fasti 2095 - 20 - 3 for sale (78,257)

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg Iedpfjxz Emvox Aa Eeti

Condition: used, Year of construction: 1993, Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Itsdpfx Aoyhqhtea Eji Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bent rail and machine in top condition Weight: approx. 3000 kg

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually. Itjdozi S U Aspfx Aa Eei

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Isdpfx Aaettc Uae Esti

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005, Empty weight: 3.750 kg Iedsucxu Iepfx Aa Eoti Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Itjdpfxeyyl Nks Aa Esi Polished bending rail Weight: approx. 1000 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Polished bending rail Itedpfeyyl Nqjx Aa Eji Weight: approx. 1000 kg

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Iodpsum Ttzofx Aa Esti Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), functionality: fully functional, Year of construction: 1985, Swivel bending machine Manufacturer: FASTI Type: 212 50/3 Itsdpfxjzmnace Aa Eei Year of manufacture: 1984 Control system: FASTIMATIK Max. bending length: 5040 mm Max. sheet thickness: 3 mm Smallest inner radius: 4.5 mm Smallest internal flange height: 24 Opening angle: 350 mm Stroke speed: 16 mm/s Drive: mechanical Lower die: fixed Height above floor: 900 mm Adjustable bending die: 80 mm Swivel angle: 180 degrees Rear stop: 6 - 2000 mm Dimensions: 6250 x 4000 mm, height 1940 mm Weight: 12,700 kg

Condition: good (used), motorized limit stop behind foot switch Ijdpjhtq N Nefx Aa Eoti Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm Iedpfx Aszgu Tija Eoti - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display Itjdpfxsza D Eie Aa Eji - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: used, machine/vehicle number: 76271002, sheet width:2040 mm plate thickness:1,2 mm Iodpfx Aajcxxq Ee Eoti total power requirement:2,5 kW weight of the machine ca.:2,0 t dimensions of the machine ca.:3,0 x 1,6 x 1,7 m

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Itedpfsy T H N Ssx Aa Eji Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Mechanical adjustment of the bending arm with digital display (setting of sheet thickness) Manual rear stop with spring fingers up to 1500 mm 5700 kg

Condition: used, Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Maximum projection: 500 mm Ijdpfx Ajy R S Eaea Esti Stepless speed adjustment via handwheel Right and left rotation Hydraulic delivery via foot switch Weight: approx. 550 kg Additional tool on request

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Isdpfsy Em Dgjx Aa Eoti Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: used, Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual rear stop up to 500 mm Side stops and table extensions Itedpfoukhnnox Aa Eoi knife sharpened 1900 kg

Condition: used, Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Maximum projection: 500 mm Right and left rotation Weight: about 500 kg Isdpfx Aoywx Hdsa Esti Further sets of rollers available on request

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94-417-008, Offer 24356 Technical data: - max. material thickness at 40 kg/mm² strength 3 mm - Max. projection 500 mm - Working depth 430 mm - hydr. infeed of the top roller - Roller center distance 125 mm - Working speeds infinitely variable 3 to 15 m/min - Right + left rotation - Drive 400 V 1.5 / 2.5 kW - Space requirement approx. W 630 x H 1450 x D 1200 mm - Weight approx. 550 kg - with: - E - foot switch for top roller feed - E - foot switch for right - left rotation Itedpfx Ast Sucnoa Eei - Various roller sets - Stop apron

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper cheek stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail in top condition Iodpfx Aox Ebt Tja Ejti Manual backgauge with spring fingers 4000 kg

Condition: used, Year of construction: 1997, sheet width 2540 mm plate thickness 3 mm Itsdpfxex Harms Aa Eei distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories and PLC control made by Alba.

Condition: good (used), functionality: fully functional, machine/vehicle number: 02212007, control type: CNC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, Swing bending machine in excellent condition. It is powered on and can be inspected at any time. Iedex Eiw Tepfx Aa Esti

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2017, total length: 9,730 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 7,790 mm, color: grey, Year of construction: 2017, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Rear axle 1: Alloy wheels; Max. axle load: 9000 kg Rear axle 2: Alloy wheels; Max. axle load: 9000 kg Rear axle 3: Alloy wheels; Max. axle load: 9000 kg Weights Empty weight: 3.600 kg Carrying capacity: 35.400 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 12/2026 Itjdpfezl Eaqox Aa Eoi Condition Technical condition: good Visual appearance: good Damages: none Identification Registration number: OP-62-ZL Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - ADR - Air suspension - Disc brakes - EBS - Twist-locks = Remarks = ADR: EX/II EX/III FL AT Valid till:

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.3 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H115 mm Itjdpfxev D Dw Aj Aa Eoi -Total weight: 14.5 kg

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head -Type: Model A 3 L 1018/20 Iodpfxjxc T Rlj Aa Eeti -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm -Weight: 3.6 kg