Used Fanuc Ff4000I-A for sale (68,898)

Condition: like new (used), functionality: fully functional, Year of construction: 2016, laser type: fiber laser, laser power: 4,000 W, input voltage: 220 V, Equipment: CE marking, Manufacturer: FANUC Corporation Model: FF4000i-A Machine type: Fiber laser Laser power: 4 kW Laser technology: Fiber laser Manufacture date: June 2016 Power supply: 200 V / 220 V Frequency: 50 / 60 Hz Rated power: 28 kVA Rated current: 16 A Short-circuit current: 5 kA Country of Manufacture: Japan Accessories: Transformer FANUC LX80L-0003-0611 Ljdpfxjz Dk U Uo Abzsag Transformer power: 30 kVA Primary voltage transformer: 400 V ±5 % Secondary voltage transformer: 200 V Transformer frequency: 50 / 60 Hz Transformer weight: 125 kg Standard: EN61558-2-13 Scope of delivery: Laser source, transformer, two fiber optic cables Location: Fulda The laser has only been used as a demonstration unit at a trade fair in 2018, therefore very few operating hours.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Thielmanni nozzle cleaner SICK curtains Ledpfx Abszu Irnezjag Installed 2021 Robot station is fully operational, in good condition and can be seen in use.

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, You get two machines for the price of one. One is fully functional and in good condition for its age, equipped with a collecting system (sliding slats). The other can be made functional again with minimal effort, but the new owner can also use it for spare parts (all electrical cards are intact; the pump system and wiring harness require repair). Lodpfxszcww Rj Abzoag The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision of the German Matra machine tool engineering.

Condition: good (used), Year of construction: 2013, It was disassembled from a working machine, all is working. Ljdpfx Abjurk E Sozjag All cards shown in the picture are for sale.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Lajdpfx Aez Aplxjbzog Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00617, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Ledpfxez D I Tnj Abzjag Warranty term (months): 12   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: excellent (used), Year of construction: 2007, Fanuc R2000iB/210F, 20% discount when ordering more than one robot. Lasdpjzxbm Tsfx Abzog DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH was founded in 2005 in Gütersloh. Since 2015, GSG Robotics GmbH has been based in Marl, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00675, load capacity: 7 kg, arm reach: 717 mm, controller manufacturer: R-30iB Mate, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC LR Mate 200iD manufactured in 2016.11. The robot comes with an R-30iB Mate controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: LR Mate 200iD Model Number: A05B-1142-B202 Year of Manufacture Robot: 2016.11 Warranty term (months): 12   Payload (kg): 7 Reach (mm): 717 Repeatability (mm): ± 0.018 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 25   Controller: R-30iB Mate Year of Manufacture Cabinet: 2016.10 Lajdpez Dz Dtjfx Abzjg RCC Length (m): 7   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment Lodpfjzktkzjx Abzjag 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian)

Condition: ready for operation (used), Year of construction: 1998, CNC control complete Ledpfx Abomn Th Ejzeag of tool grinding machine SCHNEEBERGER GEMINI Fabr.GE FANUC SERIES 160-M year 1998 with dongle Complete with controller.

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control Ljdpszkttcefx Abzeag 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Condition: like new (used), Year of construction: 2015, operating hours: 18,500 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 300 mm, workpiece width (max.): 600 mm, workpiece length (max.): 1,000 mm, overall weight: 3,600 kg, Equipment: compressor, cooling unit, documentation/manual, We are selling a slightly used Fanuc ROBOCUT α-C600ia. The machine is in working condition and connected to the power grid. A test run is possible during inspection. Lasdpfjzy D Aysx Abzsg

Condition: used, Year of construction: 2008, functionality: unexamined, overall weight: 1,270 kg, load capacity: 210 kg, arm reach: 2,650 mm, pivoting range: 360 °, controller manufacturer: FANUC, controller model: R-J3iB, teach pendant manufacturer: FANUC, teach pendant model: A05B-2452-C154 (abgebildet), input voltage: 380 V, type of input current: three-phase, repeat accuracy: 0.3 mm, A total of 7 FANUC R-2000iA/210F heavy-duty industrial robots are for sale. Available years/months: - 2 units: 08/2006 - 1 unit: 06/2007 - 3 units: 02/2008 - 1 unit: 03/2008 Individual sales are possible. The stated price applies net per unit, EXW Kirkel. For the purchase of multiple units, we offer an additional package discount upon agreement. Technical data: - Design: 6-axis articulated arm robot, floor mounting - Maximum payload at the wrist: 210 kg - Reach: 2,650 mm - Repeatability: ±0.3 mm - Mechanical weight of the robot: 1,270 kg - Axis speeds J1–J6: 95 / 90 / 95 / 120 / 120 / 190 °/s - Protection rating: Wrist and J3 arm IP67, other robot parts IP54 - Controller: FANUC SYSTEM R-J3iB - Controller power supply: 380–415 / 440–500 V AC, 3-phase, 50/60 Hz, 12 kVA - Weight of the FANUC control cabinet: approx. 180 kg - Teach pendant / handheld device included Lsdpfszzr I Tsx Abzeag Scope of supply as shown in the images or upon agreement: - FANUC R-2000iA/210F robot arm with base - FANUC R-J3iB controller - FANUC teach pendant - Connection cables - Bosch Rexroth control cabinet with PSB6000 component shown in the photo for the pictured package The photos show an example unit from 02/2008 (robot type A05B-1324-B215). Equipment, nameplates and scope of supply may vary per unit and will be confirmed before the sale. Condition: used, with visible signs of wear and tear as well as paint damage due to age and use. The robots were functional until the time of dismantling. No further functional testing was carried out after dismantling. Therefore, the functionality is indicated as unverified for precautionary reasons. Operating hours are not documented. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fanuc M20iA, R30iA robot, complete (R12601394) Year of manufacture: 8/2012 Controller: R30iA Number of axes: 6 Max. payload: 20 kg Max. working range: approx. 1811 mm Profibus Serial number: R12601394 Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. Laedpfx Aozl Af Rsbzog Spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify the country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: refurbished (used), A06B-6117-H105 Servo Amplifier, FANUC, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, you can also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us! Lsdezi Sv Hopfx Abzoag

Condition: ready for operation (used), Year of construction: 2011, Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center - CE marking - Year of manufacture: 2011 - Control: Fanuc Oi-MD - Travel X / Y / Z: 720x480x530mm - Distance spindle nose / table: 100-630mm - Table size: 800x480mm Ljdpsztymhjfx Abzsag - Max. table load: 500kg - Spindle taper: BT-40 - Spindle speed: 8000 rpm - Spindle motor: 7.5 / 5.5 kW - Rapid traverse X / Y / Z: 48 m/min each - Feed rate: 1-10000 mm/min - Tool changer: 24 positions - Tool change time (T-T): 3 sec - Max. tool weight: 7kg - Max. tool diameter: 80mm - Work light - Coolant system - Chip conveyor - Electronic handwheel Dimensions (LxWxH): 2.8x2.2x2.8 meters / Weight: 4400kg Subject to errors and omissions.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 Lasdpfx Abszq Tzaozog * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors Lasdpezzxk Uofx Abzjg AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: excellent (used), Year of construction: 2015, operating hours: 13,300 h, functionality: fully functional, machine/vehicle number: E15731769, overall weight: 220 kg, controller model: R-30iB, Robot for sale, in working condition, stored disassembled. Lasdpfezhknxox Abzog

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 30 kg, arm reach: 650 mm, pivoting range: 360 °, teach pendant manufacturer: Fanuc, Fanuc SR6IA-30P-C-CENR Robot complete with Controller. 8+ units available from October 2026 Robots were installed in an IMA line that was created for a special project but never commissioned. So even though the robots have been installed in the line, they were never commissioned prior to the special project being terminated. Lines are still in their original crate from IMA. FANUC SR-6iA - Type: SCARA Ljdpfx Abszzplcezjag - Axes: 4 — J1, J2, J3, J4 - Payload: 6 kg - Horizontal reach: 650 mm - J3 vertical stroke: 210 mm - J1 range: ±148° - J2 range: ±150° - J4: ±360° - Repeatability: approximately ±0.01 mm for J1/J2/J3 - Robot weight: 30 kg - Typical applications: pick & place, assembly, inspection and packaging - Controller: R-30iB Plus for the current configuration.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ Ljdpfozzpuwex Abzjag The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. - Robot: M-1iA/0.5A - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Fanuc LR Mate 200iC Robot, R-30iA Mate Robot Controller Year of manufacture: 2011 Scope of delivery: Robot LR Mate 200iC, Type A05B-1139-B204 I Pendant, A05B-2518-C202#EGN Fanuc System R-30iA Mate, Type A05B-2553-B061 Cable Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two weeks commissioning guarantee. No further warranty. Lsdpjzmqp Tjfx Abzoag In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify delivery address.

Condition: used, Year of construction: 2011, functionality: fully functional, overall weight: 120 kg, input voltage: 230 V, For sale is a FANUC M-1iA/0.5A robot with an R-30iA controller and an additional axis. The robot is fully functional. Scope of delivery: 1. FANUC robot M-1iA/0.5A 2. R-30iA Mate controller 3. Teach pendant 4. Additional axis 5. Required connection cables Not included in the scope of delivery (can be acquired upon request): 1. Base frame Ledpfx Aozrd T Aobzeag 2. Control cabinet on the back 3. Signal light 4. Other mounting parts Inspection possible in 45659 Recklinghausen.

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00580, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-20iA manufactured in 2013.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2013.05 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Ledpfx Ajz Anlksbzsag Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00686, load capacity: 350 kg, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/350 manufactured in 2012.08. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Year of Manufacture Robot: 2012.08 Warranty term (months): 12 Laodpfx Ajz Ag Ttobzog   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.08 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10