Used Fabrikat Esterer Lsh 65 for sale (7,258)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: Iodoyl Afrjpfx Akxetf This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: excellent (used), Spare parts for creel LSH 65, partly as good as new, new and used. Swing, stilts, hydraulic cylinders, chain drives, feed gears, Itjdpfx Akji T Egpjxjf guides, solenoid valves, overhang parts. Saw frame top and bottom, Saw hook with insert hinges. Pulleys. Spare parts also available for Esterer sash gang SS 71.

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife Itodpfxeyhduyj Akxef - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: excellent (used), Cross-country trac/multi-saw receiver Rollers width 1160mm Number of drawing rollers 14 Distance between rollers 550mm Drop chains with takers 4pcs Itodpotrq S Hsfx Akxsf Longest element 820cm Use behind a sawmill or a multi-saw

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge Itedpfx Ajw Dn S Aokxof With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: good (used), Hydraulic power unit for Esterer LSH saw frame year 2006 Type: RP 63 WÜ feed for LSH also available fully functional - good condition - immediately available Itjdpfeg R Sm Dsx Akxof Location: Austria, near Ried im Innkreis Visit also my other advertisements. I am looking forward to your inquiry.

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm Iodpfsyg Im Rsx Akxstf - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Year of construction: 1980, condition: used, passage width 560 mm passage height 560 mm stroke 600 mm Itodpfx Aecvhndekxof Speed max. 320 1/ min. The creel is completely mechanized with new Moehringer high speed infeed.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Iedsrmmqzjpfx Akxjtf

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws with roller infeed with lath head with sliver separator with drive motor (45 kW) Isdpfxoy Da Iie Akxstf with control cabinet with saw blades Location: Germany, near Lake Chiemsee

Condition: used, Esterer DKE Trim Saw Passage width: 600 mm Itedpfjy Da Hfex Akxef Passage height: 160 mm with roller feed with roller table/outfeed table Location: Germany, near Chiemsee

Condition: used, Frame Saw Esterer S71 700 mm frame width 500 mm stroke with frequency-controlled feed with saw blades with hydraulic saw tensioner (+spare bar) with drive motor with intermediate gear with riving knife (Arta-C) Itjdey Da Enepfx Akxof Location: Germany, near Chiemsee

Condition: ready for operation (used), Year of construction: 2020, Immediately available ex location: Horizontal surface grinding machine, make Holzmann Model SPM 30 FUM Itsdpfx Asy Da Ebekxjf Year of manufacture: 2020 Grinding length: 400 mm Grinding width: 200 mm Table: 600 x 300 mm Automatic feed Magnetic chuck Coolant system Weight: 2 t Offered at a price of EUR 2,250 plus VAT ex location.

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Iedpsmqkr Defx Akxstf

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Itjdpfx Aet Hg Hujkxjf Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: good (used), Hydraulic clamping trolley Type VS. Track width 790 mm. Trolley height 390 mm. With auxiliary trolley HEH or HKE. Itedpexwn Rvsfx Akxjf

Condition: excellent (used), functionality: fully functional, Complete hydraulic feed unit for EWD Esterer creel type HDE. Very well maintained. Infinitely variable from 0 - 12m / min. Isdperrxtpjfx Akxetf

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Isdpsxw Ubnjfx Akxetf

Condition: excellent (used), functionality: fully functional, Base plate for Esterer sash cutters type SS 71 or HD 71 with main shaft and bearings. Itsdpfsth Udmex Akxof Equipped with full and idle pulleys.

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Isdpfx Akjxw Uf Tjxetf

Year of construction: 1990, condition: excellent (used), 1 piece mass balancer for creel. With complete accessories and attachments. Ijdpfxjfm Ev Rj Akxotf Little been in use.

Condition: excellent (used), 2 pieces stilts for Esterer creel type EHD 30. Itsdpfxoip Uf Ue Akxef Only 6 years in use. Also for other Esterer creel types stilts and spare parts available.

Condition: good (used), Year of construction: 1971, Esterer frame saw with many spare parts and at least 40 new and used saw blades. Itedpfxencfiyj Akxef The gang saw is in a good, ready to use condition with minimal bearing play. After agreement the saw blade grinders can be sold with the saw.

Year of construction: 2017, condition: ready for operation (used), Belt length: 2900 mm belt width: 360 mm Belt speed infinitely variable drive motor Itodpfxedzx E Uo Akxef table height adjustable by: +/- 500 mm space requirement: 2000 x 600 x 650/700 mm

Condition: used, maximum load weight: 27,920 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/1993, next inspection (TÜV): 02/2027, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, * Fixed tank with 6 compartments, total capacity 40,320 liters * 7,360 l / 7,430 l / 6,750 l / 5,400 l / 5,880 l / 7,500 l (compartments 1-6) * FMC MultiFlow tanker control system * FMC GMV Z1000 tanker hydraulics * Epson printing unit * Hose reel at rear right ----* Knorr braking system with ABS * BPW axles with drum brakes Ijdpfx Asyx R Hrokxstf * 1st axle liftable * Central lubrication system * ADR certificate as per 9.1.1.2: FL & AT * Tank coding according to 45.3.3.1 ADR: LGBF ----* Tire size: 385/65R22.5 * Technical gross weight: 34,000 kg * Unladen weight: 6,080 kg * Total length: 11,350 mm * Tank periodic inspection due: 02/2026 * Tank hydraulic pressure test due: 02/2029 * Next safety inspection due: 08/2026 ----Vehicle number: 11955----Subject to errors and prior sale----Advertising and various lettering digitally removed. -----We are happy to assist you with all the administrative procedures involved in purchasing a vehicle. Simply let us know your requests and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicleTÜV/Safety Inspection approvalComplete export handlingBrokerage of financingApplication for export license platesTransfer of vehiclesRegistration of vehiclesRecovery and vehicle transport----Your VTS Team