Used Excello 1000X1000Mm for sale (16)

Condition: used, table length 1000 mm table width 1000 mm Crsdpogrndiofx Ailsd table load / t weight 1100 kg table height 100 mm

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Csdpfx Aijt Hw D Djlord Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, table load: 400 kg, spindle speed (max.): 16,000 rpm, number of axes: 4, This 4-axis EXCELLO XHC 241 M/3 was manufactured in 2003. It features a maximum spindle speed of 16,000 RPM and a 500 mm pallet with a maximum load of 400 kg. The machine is equipped with a 120 station automatic tool changer and offers rapid traverse rates of up to 120 mm/min. If you are looking to get high-quality machining capabilities, consider the EXCELLO XHC 241 M/3 horizontal machining centre we have for sale. Contact us for further details. • Pallet size: 500 mm Credsy Ry Hlopfx Ailod • Pallet change time: 7 s • ATC capacity: 120 stations • Spindle taper: HSK-A63 • B-axis: 360,000 positions, 0.001° increment • Feed rate (X/Y/Z): up to 120 mm/min • Rapid traverse (X/Y/Z): 120 mm/min • B-axis rapid traverse rate: 100 (unit not specified)

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 docs available Csdjurt Tlspfx Ailjrd ball groove milling for CV constant velocity joints - homokinetic joints This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. Credjyw N Irepfx Ailsd TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Note: The door on the right pallet station is jammed.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Crodpfofnk Ehox Ailed Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: ready for operation (used), EXCELLO DLZ 500 LZ - 3 Meter Turning Length / Lead and Feed Screw Lathe - Centre height: 250 mm - Centre distance: 3000 mm - Swing diameter over bed: 500 mm - Swing diameter over cross-slide: 310 mm - Spindle bore: 65 mm - Spindle speeds: 28 - 1400 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric etc. - 3-jaw chuck 250 mm - 4-jaw chuck 250 mm Credpfx Aijyntkqeljd - Multifix toolholder with inserts - Steady rest - Tool cabinet - Documentation Dimensions (LxWxH): 5.5x1.4x1.6 meters / Weight: 3800 kg Subject to errors and input mistakes

Condition: used, Year of construction: 1960, centre distance 1200 mm Csdsx U A Igspfx Ailsrd 550 weight of the machine ca. 2,5 t

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 109 956, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS Workpiece Rack Length: max. 610 mm Workpiece Diameter: 38 mm Module Range: 0.3 – 1.3 Max. Slide Stroke: 1130 mm Max. Rolling Bar Length: 915 mm Max. Profile Outer Diameter (Standard): 50 mm Max. Profile Width (Standard): 125 mm Gear Cutting (Rollability): 0.3–1.25 Machine Cycle Times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling bars forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling bars return: 4.8 s Loading/Unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total Weight (without automation): 12,200 kg Overall Width: 5,014 mm Machine Width: 3,104 mm Depth without cantilever: 2,564 mm Depth with cantilever: 4,166 mm Hydraulic System Hydraulic Tank: 1,000 l Hydraulic Operating Pressure: 80 bar Electrical Equipment Operating Voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank Capacity: 260 l Pump Pressure: 3 bar Pump Flow Rate: 24 l/min Cooling Water Supply for Hydraulic Tank (Quantity): 10 l/min Cooling Water Connection for Hydraulic Tank (Temperature): 20 °C EQUIPMENT Full enclosure included Tailstock included Hydraulic system included Oil system included Csdpfjwx H R Tsx Ailord

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Cjdpfx Ajd Nw Ttoilord Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: good (used), Used stainless steel transport container / pressure vessel Article number: 10542 Quantity: 34 Last application: Foodstuffs Volume: 800L Type: Standing on four legs with forklift tunnel Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Dome lid, Ø 400mm Operating pressure according to nameplate: ATM Container dimensions: Outer diameter: 1000mm Overall height: 1550mm Overall width: 1000x1000mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Crodpfx Aiogx Hmroled Equipment: Nameplate: Yes Outlet diameter: DN 50 Outlet valve: Ball valve

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets Cjdpfjzhr Rhjx Ailjrd - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Ceramic measuring plate by Johannes Fischer Aschaffenburg Cjdpfx Aisix Ahqjlsrd in laboratory quality, 1000x1000mm Flatness below 1µm (!) Includes cabinet base with 2 doors Measurement protocol available upon request for an additional charge.

Condition: used, functionality: fully functional, 2500 heavy-duty mesh, various variants Used goods, very good condition, see pictures Material: hot-dip galvanized Weight load: approx. 450 kg/m² Codpfsvx Snxox Ailerd Support bar runs along the long side The following variants are currently available: Dimensions Mesh size Support bar height Material thickness Support bar 1000x1000mm 19x30mm 45mm 3mm 1410x1000mm 19x30mm 45mm 3mm 1335x1000mm 19x30mm 45mm 3mm 1335x485mm 19x30mm 45mm 3mm 1335x720mm 19x30mm 45mm 3mm 1410x720mm 19x30mm 45mm 3mm 1410x670mm 19x30mm 45mm 3mm 1335x885mm 19x30mm 45mm 3mm 1410x870mm 19x30mm 45mm 3mm 1410x885mm 19x30mm 45mm 3mm 1140x1000mm 19x30mm 45mm 3mm Negotiated price: € 45 per m² net from stock P10267 Larger quantities on request! Numerous gratings with different mesh sizes and support bars available! Goods are in stock. Transport and assembly available on request. Viewing possible at any time by arrangement. Further information on request. Over 5000 linear meters of pallet racking from numerous manufacturers always in stock. (Subject to changes and errors in the technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: good (used), total length: 1,600 mm, total width: 1,200 mm, plate height: 50 mm, Paletti Aluminum Clamping Plate - Dimension 1600 x 1200 x 50mm - Fixing Holes Grid 100x100mm (15x10 Holes) - Steel Insert Ø20mm x M12 fixing thread - 4x transportthreads M16 (for eye bolts) - one damage on one edge and slight cuts on the surface Crjdpfx Aisynwr Esljd - On demand alumium frame (1000x1000mm) for € 500,--

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm Cjdpsiulkqefx Ailord - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table