Used Essemtec Pantera Xv for sale (363)

Year of construction: 2011, condition: good (used), Essemtec Pantera XV Pick and Place Machine Year of manufacture: 2011 0201 components Top-down image processing Intelligent tape feeder (8 to 56 mm) Placement speed: 4,500 cph User-friendly graphical software Optical alignment on the fly Upward-vision system for component inspection Feeder package: 9 × 740i paper 8 mm 1 × 740i blister 8 mm 5 × 741i 12 mm 7 × 742i 16 mm 1 × vibration feeder 1 × strip tape feeder Iiodpfx Aaoyxc I Us Esd

Year of construction: 2006, condition: good (used), functionality: fully functional, Machine width: approx. 1.90 m with track/transport path approx. 1.25 m without track/transport path Machine depth: approx. 1.35 m incl. main switch approx. 1.20 m without main switch Machine height: approx. 2.00 m with superstructures/signal light approx. 1.50 m without superstructures Note: The dimensions are measured manually and may differ from official manufacturer specifications. 2. Work area / component placement area Iedpfx Ajzl R R Ioa Eoid Work area in the component placement area: approx. 600 × 600 mm Note: This is the measured mechanical area in the machine room or in the component placement area. The maximum processable printed circuit board size may differ from this and must be confirmed separately via machine data and software settings.

Year of construction: 2017, operating hours: 157 h, condition: used, functionality: fully functional, machine/vehicle number: 0000014/21, Essemtec pick-and-place machine paraquda.g2 with dual head Accessories: 8x 8mm double high-speed feeder; 10x 12mm high-speed feeder; 6x 16mm high-speed feeder 3x 16/24mm high-speed feeder; 2x 32/44mm high-speed feeder; 3x 8mm 10-lane feeder Iiedpfew U Dpqex Aa Ejd 1x 8/12mm 8-lane feeder

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Inline + Dispense Preparation including 6 CLM Feeders Operational machine! Isdsw Ewfzepfx Aa Eeid

Year of construction: 2008, condition: ready for operation (used), Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible. Iiedpfx Aaeymfcpo Ejd

Condition: ready for operation (used), An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible. Isdpfsw Snd Hox Aa Esid

Condition: used, Year of construction: 2008, Perfect binding line Müller Martini Pantera (1577) Year: 2008-2000 - 1991 Consisting of Gathering machine Müller Martini 1571 Year: 2000 Description: - Hand feeding station - Number of gathering stations: 12 - ASAC automatic self adjusting calliper - Excluding pump(s) - Set up element - Transfer into the binder Perfect binder Müller Martini Pantera (1577) Year: 2008 Description: - Colour monitor with touch screen - Hand feeding - Number of clamps: 12 - Milling and roughening station Iedpfx Aasy R Ty Ee Eeid - Dust extraction system - PUR spine gluing unit - PUR premelter for PUR spine glue unit: MOD 30 POT (2007) - Hotmelt side glue - Premelter for side glue unit: Nordson Durablue 4 - Gauzing station - Drum cover feeder - Scoring station - Nipping and pressing station - Lay down device Max. mechanical speed: up to 4.000 cycles/h Maximum size range: 380 x 320 x 50 mm Minimum size range: 120 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Documents

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, type of input current: three-phase, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Iodextau Ejpfx Aa Eoid Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Isdpfx Aaeb A H Dys Eeid -Movitrac: 204 xv -Power output: 4.8 kVA -Input: 380 - 50/60 Hz -Output: D 20 - 380 V -2 - 100 Hz -Number: 1 converter available -Weight: 13 kg

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis YCM XV 560A was manufactured in 2011. It features a table size of 700 x 420 mm and impressive X, Y, and Z travels of 560 mm, 410 mm, and 450 mm, respectively. The machine is equipped with an 11 kW spindle power and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the YCM XV 560A vertical machining centre we have for sale. Contact us for further details. • Table size: 700 x 420 mm • Condition: Very good; low hours; used in 1-shift production Ijdpfx Aaoy Duxvs Eeid

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders - Machine weight: 17.5 tons Iiedpfx Aasv Nhyfo Ejd - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Condition: excellent (used), Year of construction: 2016, operating hours: 6,500 h, functionality: fully functional, 12 Gathering Stations Müller Martini 3692 Tensioning/Handfeeding unit 3692 ASAC Automatic Caliper Control 3715 Reject Delivery Automatic Signature Recognition Cameras: ASIR 3 12 clamps Muller Martini 1577 Pantera Touchscreen control with automatic set-up Hotmelt spine & Side gluing unit with premelter Hotmelt side glue with premelter PUR Nozzle Spine Gluing Unit Curved conveyor system 90 Muller Martini 3520 Conveyor belt Muller Martini 3520 Conveyor belt with escape gate 3520 Iisdpfxoyufk As Aa Eod Müller Martini Granit 3 Knife Trimmer 3676 Müller Martini UNO Stacker 1534

Year of construction: 2001, condition: ready for operation (used), Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation. Iiedpfxsnxk H Nj Aa Eed

Condition: used, functionality: fully functional, empty load weight: 1,395 kg, overall weight: 3,150 kg, axle configuration: 4x4, color: white, suspension: steel, number of seats: 3, Year of construction: 2011, operating hours: 2,849 h, Equipment: all wheel drive, cabin, trailer coupling, Tipper: + Fort + Pantera L24A + Switchable all-wheel drive + Reduction gear + First registration: 14.11.2011 + 2,884 operating hours + Lombardini 4-cylinder diesel engine, type LDW1404 + 38 hp; 1,371 cc + 3-way tipper + Cabin protection grille + Steel floor + Prepared for trailer hitch Iedpfsx Agvusx Aa Eeid + 5-speed manual transmission + 3-seater + Rear window + Storage box + Unladen weight: 1,395 kg; GVW: 3,150 kg + 3665 mm x 1570 mm x 2130 mm (LxWxH) + Platform dimensions: 2430 mm x 1570 mm + Max speed 40 km/h + Municipal vehicle from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: new, functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, spindle speed (max.): 10,000 rpm, XV 1060 Control SINUMERIK 828 D - ShopMill with 15.6" touch screen Clamping surface 1,160 x 600 mm, number of T-slots: 5 X-axis: 1,000 mm, Y-axis: 600 mm, Z-axis: 650 mm Min. distance spindle nose - table: 130 mm, max. 780 mm SK 40 taper, spindle max. speed 10,000 rpm Double-arm tool changer, 24 tools Standard features: - Rigid tapping - Swiveling operator panel - Sliding door with interlock - Viewing windows in work area enclosure - Control cabinet with heat exchanger - 2 LED work area lights - 3-color machine status indicator light - Portable electronic handwheel - Central automatic grease lubrication for all linear axes and X, Y, Z ball screws - Power-off after program end - Compressed air at main spindle for chip removal - Chip flushing system with rinse gun - Spindle cooler for 10,000 rpm - Air gun - Coolant nozzles at spindle Iijdexugyqepfx Aa Eed - Work area lighting on/off switch - 1 set of leveling elements - Electrical system in accordance with VDE regulations

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. Isdpsxcgy Hsfx Aa Eoid The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain, rotational speed (max.): 12,000 rpm, Vertical machining center YCM NXV600A - demonstration machine Iiedpfevvuh Ajx Aa Eed Control: Heidenhain TNC620 Spindle: 12,000 rpm SK40 17kW Coolant system with IKZ20 bar Handwheel Tool changer: 24-way Chip conveyor The machine is located at our location in Soltau and can be viewed in operation at any time!

Condition: new, new ! twin shaft paddle mixer all stainless steel variable speed microcontroller 13,2 kW Max. loading volume: ± 500L 2 mixing directions inspection gantry safety lid Iiedpfxszly Atj Aa Eed Easy clean CE-approved with vacuum pump Büsch 6,2 kW + Loader for eurobins

Condition: used, Year of construction: 2022, total length: 2,020 mm, lifting height: 4,350 mm, load capacity: 1,600 kg, · Bedienung Geh/Stand · Batterie min. 201kg max. 260kg · Initialhub 115mm · Nenntragfähigkeit 1600 (2000)kg · Lastschwerpunktabstand 600 mm · Lastabstand 724/646 mm · Achslast mit Last antriebsseitig/lastseitig 979/1850 kg · Achslast ohne Last antriebsseitig/lastseitig 962/268 kg · Bereifung Polyurethan · Reifengröße antriebsseitig mm ⌀ 230 x 90 · Reifengröße lastseitig mm ⌀ 85 x 85 (⌀ 85 x 60) · Stützrollengröße mm ⌀ 150 x 50 · Spurweite antriebsseitig/lastseitig 534// 380/500 mm · Höhe Deichselgriff in Fahrstellung min./max. 1175/1380 · mm · Gabelhöhe gesenkt mm 86 · Arbeitsgangbreite bei Palette 800 x 1200 längs 2390 / · 2777 mm · Wenderadius 1507/1894 mm · Fahrgeschwindigkeit mit/ohne Last km/h 4,0/4,0 6,0/6,0 8,0/10,0 · Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 · Senkgeschwindigkeit mit/ohne Last m/s 0,40/0,35 · Max. Steigfähigkeit kB 5 mit/ohne Last %: 10,0/22,0 Iijdpfjzluwfjx Aa Esd · Betriebsbremse Elektromagnetisch · Fahrmotor, Leistung S2 = 60 min kW 2,3 · Hubmotor, Leistung bei S3 = 15 % kW 3,2 · Batterie nach DIN 43531/35/36 A, B, C, nein 2PzS · Batteriespannung/Nennkapazität K V/Ah 24/230 · Li-Ion: 24/205 · Batteriegewicht ±5 % (herstellerabhängig) kg 212 · Energieverbrauch nach DIN EN 16796 kWh/h 0,84 · Art der Fahrsteuerung AC-Steuerung · Schalldruckpegel (Fahrerohr) dB(A) ≤66

Condition: used, functionality: fully functional, input voltage: 230 V, Hello, we are offering a used paint shaker/agitator from the German manufacturer Collomix, model VIBA 25. The device is in good condition and fully functional. It is suitable for containers up to 25 kg. The paint is brought into vibration by a shaking motion, which causes it to mix itself perfectly. We have used this system to mix screen printing inks. However, the system can also be used for a wide variety of paints and coatings. The pre-set time of 1, 2 or 3 minutes can be selected using the selector buttons. The system is currently located in our warehouse in 93476 Blaibach, Bavaria. Iiedpfezmcqijx Aa Eed If you have any questions, please feel free to write to us.

Condition: used, Year of construction: 2019, operating hours: 2,300 h, lifting height: 3,330 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 2,140 mm, total length: 1,740 mm, total width: 810 mm, color: silver, Empty weight: 750 kg Lifting capacity: 1.200 kg Iisdpfxezk H Sfs Aa Eod - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: F20272V01657 - Operating hours: 2300 - Type: Pedestrian stacker - Lifting capacity: 1200kg - Lifting height: 3324mm - Overhead clearance: 2215mm - Free lift: 0mm - Fork length: 1150mm - Fork width: 560mm - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 02 EPZB 0200 SC - └ Battery year of construction: 2019 - └ Capacity: 200Ah - └ Battery voltage: 24V - Transport dimensions: 1740mm x 810mm x 2140mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Year of construction: 2016, operating hours: 3,461 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, empty load weight: 1,600 kg, mileage: 3,461 km, Electric triple-mast stacker. Brand: Still (Germany). Year of manufacture: 2016. 3,461 operating hours. Capacity: 1,400 kg. Lifting height: 5,016 mm. Mast height (unloaded): 2,165 mm. Equipped with: FREELIFT. Battery: 2018, with charger. Automatic filling system. Watch the video on YouTube. Iijdpszk Hm Njfx Aa Ejd

Condition: good (used), Year of construction: 2018, operating hours: 93 h, lifting height: 1,844 mm, fuel type: electric, mast type: duplex, construction height: 1,415 mm, empty load weight: 1,200 kg, mileage: 93 km, Duplex stackerBrand: Still | (Germany)Year of manufacture: 2018Hours: ONLY 93Capacity: 1,400 kgLifting height: 1,844 mmDrive-through height: 1,415 mmInitial lift!Battery: automatic filling systemExternal charger Iodpfx Aajzk Hmps Eeid

Condition: good (used), Year of construction: 2020, operating hours: 239 h, load capacity: 1,200 kg, lifting height: 3,824 mm, fuel type: electric, mast type: duplex, construction height: 2,465 mm, empty load weight: 880 kg, mileage: 239 km, Electric stacker Brand: Still (Germany) Year of manufacture: 2020 Load capacity: 1,200 kg Lifting height: 3,824 mm Isdszk Hmijpfx Aa Eeid Mast lowered height: 2,465 mm Hours: 239 Battery: 2020 Automatic filling system Equipped with an external charger.

Condition: used, Year of construction: 2020, operating hours: 7,516 h, lifting height: 5,170 mm, free lift: 1,550 mm, fuel type: electric, mast type: duplex, fork length: 1,140 mm, total height: 2,270 mm, total length: 2,200 mm, total width: 960 mm, color: silver, Empty weight: 1.850 kg Lifting capacity: 1.400 kg Iodpfx Aaezkufyj Eoid - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: W42374X00021 - Operating hours: 7516 - Type: Sit stacker - Lifting capacity: 1400kg - Lifting height: 5165mm - Overhead clearance: 2270mm - Free lift: 1550mm - Fork length: 1140mm - Fork width: 560mm - Options: Vrije-heffing, Doppelstock, Joystick - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 3PzS375 - └ Battery year of construction: 2020 - └ Capacity: 375Ah - └ Battery voltage: 24V - └ Tray length [mm]: 780 - └ Tray width [mm]: 210 - └ Tray height [mm]: 600 - Transport dimensions: 2200mm x 960mm x 2270mm (l x w x h) - Transport weight [kg]: 1850kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom