Used Ebu Hk 40 F for sale (51,106)

Year of construction: 1987, condition: used, pressure 40 t throat 270 mm stroke 4-100 mm no. of strokes 130 Hub/min Iaodpfop Syctjx Ag Iet ram - range of adjustment 80 mm table surface area 670x540 mm ram surface 460x300 mm hole in the table Ø 100 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1500x2300x3300 mm

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Ijdpfx Aoy Hqz Ssg Ijat Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Iedpfoiuxwqex Ag Ijat Höhe 3.600 Breite 1.660 Tiefe 2.400 Gewicht 12.100 kg

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Iedpfx Agsxq Exwo Isat

Year of construction: 1987, condition: used, pressure 63 t throat 300 mm stroke 8-140 mm Ijdpfx Agep Sycwe Ieat no. of strokes 70 Hub/min ram - range of adjustment 100 mm table surface area 750x620 mm ram surface 500x340 mm hole in the table Ø 180 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 2100x1500x3300 mm

Year of construction: 1986, condition: used, pressure 100 t throat 340 mm stroke 8-140 mm no. of strokes 50 Hub/min ram - range of adjustment 110 mm table surface area 1000x700 mm ram surface 650x450 mm hole in the table Ø 180 mm Isdpfx Asp Syczeg Ijat table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 10,5 t dimensions of the machine ca. BxTxH 2300x1600x3500 mm

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Iajdsvbk Rwspfx Ag Ijt Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: used, Year of construction: 1990, Pressure 250 t stroke 16 - 160 mm no. of strokes 33 / 50 /min Throat 410 mm distance table/ram, max. stroke up, adjustment up 540 mm table surface area 1100 x 790 mm Hole in the table 660 x 320 mm table height over floor 720 mm Passage to the back 590 mm ram surface 800 x 500 mm Iedpfxoy Ruqro Ag Ieat ram adjustment 120 mm power requirement 16,0 / 23,0 kW weight 28,5 t dimensions (WxDxH) 2,1 x 3,2 x 3,4 m polumschaltbar with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, motoric centralized lubrication

Condition: excellent (used), mileage: 111,579 km, first registration: 10/2009, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, power mirror, retarder, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Low noise - Speed limiter - Refrigerator - Air horn - Sun visor - Stability control - Toolbox = Further Information = Axle Configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Twin tires Rear axle 2: Twin tires Weights Unladen weight: 31,480 kg Functional Mast: Telescopic (4 sections) Mast length: 47.8 m Lifting capacity: 40,000 kg Lifting height: 4,780 cm Crane: FAUN HK40 + JIB, year of manufacture 2009, rear-mounted Body brand: FAUN HK40 + JIB CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request SCANIA P420 8X4 WITH FAUN HK 40 CRANE + JIB EURO 5 L PACKAGE 420 HP DRIVE 8X4 WHEELBASE 490 CM DIFFERENTIAL LOCKS LEAF SUSPENSION MANUAL TRANSMISSION RETARDER CP19 SLEEPER CAB WITH AIR CONDITIONING, REFRIGERATOR FAUN HK40 CRANE + JIB Max. lifting capacity 40 t Telescopic boom 38 m Max. working height with jib 45.5 m Max. radius 40 m Technical data Iaodpeyiuqzofx Ag Iet Max. lifting capacity 40 t Telescopic boom from 10.5 m Telescopic boom up to 35.2 m Crane engine/make: Mercedes-Benz Crane engine: 4-cylinder diesel Full ballast pat system 3-sheave hook Toolboxes FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) General information about the item: Iaodpfx Agepgndgs Ijt This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Ijdpfxey St Ncs Ag Ieat Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . new UVV-tested .

Condition: new, maximum load weight: 1,590 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 4,064 mm, loading space width: 1,774 mm, loading space height: 2,000 mm, total width: 2,292 mm, total height: 2,634 mm, Year of construction: 2026, Box trailer - HK 254018-20P FlexxZurr Our special price – €7,250 incl. 19% VAT, incl. 6.4% delivery fee, incl. registration documents! Description: The tandem plywood box trailer impresses with its well-thought-out detailed solutions and versatile range of applications. The chassis and running gear are made from hot-dip galvanized steel, ensuring a long service life for the plywood box trailer series. The body is made entirely of 15 mm multi-layer plywood with a special plastic coating, which can be optionally covered with your company’s branding for an additional charge. For better visibility, an interior light is installed. All plywood box trailers are equipped with galvanized steel hinges and a lockable rotary bar lock. Rubber door seals ensure your goods can be transported protected from water ingress. Roof and lower front wall aluminum reinforcements give Humbaur plywood box trailers exceptional strength. The floor consists of special multi-bonded, waterproof plywood with an anti-slip phenolic resin coating and is 15 mm thick. The integrated side lashing system is fitted into the anodized side frame profiles. Each lashing point has a 400 kg load capacity (DEKRA certified). This system can be expanded if required and offers the transporter ample options for securing cargo. Edge profiles, a torsion-resistant rear portal, and rain gutters are made of anodized aluminum to provide the highest possible protection against corrosion. The tandem plywood box trailer from Humbaur – the ideal partner for transporting your goods. Technical Data: * Trailer type – Twin axle * Construction – Plywood * Unladen weight – 890 kg * Gross vehicle weight – 2,500 kg * Payload – 1,610 kg * Internal length – 4,064 mm * Total length – 5,546 mm * Internal width – 1,774 mm * Total width – 2,292 mm * Internal height – 2,000 mm * Total height – 2,634 mm * Loading height – 560 mm * Tyres – 15-inch Standard equipment: V-drawbar, fully hot-dip galvanized * 13-pin plug and reversing light Iodpfxjyxkg Ej Ag Ioat * 15 mm-thick floor panel * Side walls and roof made of 15 mm thick multi-layer plywood with UV-resistant plastic coating * Interior light fitted * Double rear wing door * Galvanized rotary bar lock and hinges * Lashing rings, infinitely adjustable in the frame profile, 400 kg pull force per ring, DEKRA certified * Automatic jockey wheel

Condition: used, Year of construction: 2008, pressure 40 t throat 230 mm stroke 4-100 mm table surface area 650x450 mm ram surface 420x220 mm Iajdpfx Agey I Ddvs Iot ram - range of adjustment 85 mm hole in the table 170x220 mm table height 800 mm no. of strokes 60 Hub/min dayligth 375 mm Dimensions (HxWxD) 2800x1200x1900 mm weight of the machine ca. 3,2 t

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: (For more extensive technical data, see PDF) Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 KK plungers. - Pre-evacuation system to reduce oxygen intake. - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/hour. - Performance range: 0.33l LN 3,000–13,500 bottles/hour, 0.5l NRW 3,000–12,000 bottles/hour. - Minimal oxygen intake: maximum 0.02 mg O2/l. - Conversion parts available for different bottle types (0.33l longneck, 0.33l Steini, 0.5l NRW). Advantages of the machine: The machine offers numerous advantages that enhance the quality of the filling process. - Gentle, product-friendly filling under CO2 atmosphere. - 50–60% less CO2 consumption compared to short tube filling systems. - High longevity thanks to reinforced drive components. Iedpfx Agjwqz Nnj Isat - Hygienic design for easy cleaning. - Short changeover times. - Convertible to cans according to manufacturer specifications (conversion kit not included). Low operating hours: 3 days per week, 7 hours each; rarely operated for 4 days per week. Annual maintenance by the manufacturer. The machine is immediately available; it was only removed from production about 5 months ago. Original purchase price was approx. €330,000.

Condition: good (used), We offer you here a used shelf connector of the manufacturer SSI Schäfer for sale. Technical data of the shelf connector: Manufacturer: SSI Schäfer Included in the scope of delivery: 01x shelf connector used material colour: blue Shelf spacing: approx. 250 mm L-profile: approx. 40 x 40 mm Isdpfed Ttz Rsx Ag Ieat Weight/pc: approx. 0.536 kg/pc. 02x hexagon head screws, M8 x 20 8.8. 02x hexagon nut, M8 02x washers, M8

Condition: good (used), The scope of delivery includes: 6x steel panels, used Manufacturer: SSI Schäfer Total depth: approx. 960 mm Inner depth: approx. 955 mm for stud depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material color: Sendzimir galvanized Frame profile: approx. 300 x 40 x 20 mm Weight per piece: approx. 7.940 kg Your contact persons: Mr. Andre Evening Ijdpsv R T Epefx Ag Isat Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 1996, pressure 40 t stroke 4 - 100 mm no. of strokes 130 /min throat 225 mm dayligth 475 mm table surface area 650 x 465 mm hole in the table 210 x 170 mm table height over floor 710 - 950 mm table adjustable 240 mm ram surface 430 x 240 mm ram adjustment 85 mm Iaedpfxey Rurpo Ag Iot power requirement 2,2 kW Weight 3,3 t dimensions (WxDxH) 1,1 x 1,9 x 2,2 m with motor, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, motoric centralized lubrication, two-hand and foot operation

Condition: used, Year of construction: 2009, pressure 40 t stroke 4 - 100 mm no. of strokes 130 /min throat 230 mm dayligth 475 mm table surface area 650 x 460 mm Isdpfsvzxpnex Ag Ijat hole in the table 205 x 165 mm table height over floor 710 - 950 mm table adjustable 240 mm ram surface 435 x 240 mm ram adjustment 85 mm power requirement 5,0 kW Weight 2,6 t dimensions of the machine ca. 1,2 x 1,7 x 2,3 m x m x m with motor, pneumatic hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, motoric centralized lubrication, adjustable table, two-hand and foot operation

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available Iaedpfxevuugcs Ag Ist

Condition: used, Year of construction: 1996, pressure 130 t distance between columns 1220/1070 mm stroke 22 - 96 mm no. of strokes 20 - 120 Hub/min dayligth (stroke and adjustment up) 518 mm column travel -side 600 mm table surface area 1220 x 880 mm hole in the table 450 x 250 mm table height over floor 950 mm ram surface 1180 x 800 mm Ijdpsvuubyofx Ag Isat power requirement 22,0 kW weight of the machine ca. 17,50 t required space 3,7 x 1,75 x 3,55 m ram adjustment 110 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting

Condition: used, machine/vehicle number: 008526, X axis working area: 4000 mm Y axis working area: 1100 mm Iedpfey Nx Ulsx Ag Ioat Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 29

Condition: used, Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Transfer: in the current condition as seen -Error: L3 power level defective -Manufacturer: AdPoS, UPS system -Type: UPS Maxi-J FH 40 kVA -Dimensions: 825/440/H1270 mm Iajdpjfngw Tsfx Ag Ijt -Weight: 154 kg

Condition: excellent (used), Year of construction: 2011, 5-axis working center in very good condition. Technical data will be updated soon. Iedpfx Agsx Ur Iij Ieat

Condition: used, max. grinding length: 300 mm max. grinding width: 150 mm table movement - longitudinal: 2 - 20 m/min grinding plate rotations: 3000 Upm electrical connection: 380 V, 1,1 kW Iaedpfxjr Nyato Ag Ijt space needed: 1500 x 1100 x 1750 mm weight: 920 kg

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono (see technical details on photos) Year of construction: 2021 - Rarely used Iaodpjyluuxjfx Ag Iet