Used Ducomp Brd 7,5Kw for sale (78)

Condition: new, Year of construction: 2026, total length: 1,010 mm, total width: 680 mm, total height: 1,605 mm, power: 7.5 kW (10.20 HP), fuel type: electric, pressure (min.): 6 bar, pressure (max.): 8 bar, Equipment: CE marking, DUCOMP BRD 7.5kW - Screw compressor + Air Tank + Dryer In BRD Series Compressors, the compressor and dryer are mounted on the air tank and their Dkedpfx Aioygdk Ejwsl connections are made. It is shipped ready for operation thanks to its internal tank and dryer.

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 Spiral Casing Pumps in Process Design 1 unit has been fully overhauled; bearings in both the pump and the motor are brand new. The mechanical seal has been serviced by a professional specialist. All gaskets have been replaced with new ones. Pump specifications: - Flow rate: 6 m³/h - Delivery head: 25 m - Pump speed: 1440 rpm - Shaft seal: Double-acting mechanical seal - Seal manufacturer: Burgmann HRZ 13754-00 - Seal configuration: SIC/SIC/-CAR/SIC-VITON - Impeller type: Closed two-channel impeller - Impeller diameter: 277 mm - Bearing type: Rolling bearings - Impeller side: 1x NU411 - Drive side: 2x 7311 - Lubrication (drive side): Oil - Lubricant monitoring: Oil level regulator Materials: - Pump casing: Duplex steel Noridur 1.4593 (9.4460) - Wear plate: Duplex steel Noridur 1.4593 (9.4460) - Discharge cover: Duplex steel Noridur 1.4593 (9.4460) - Shaft: Tempered steel C45+N - Impeller: Duplex steel Noridur 1.4593 (9.4460) - Bearing bracket: Cast iron EN-GJL-250 - Shaft sleeve: Duplex steel 1.4462 Connections: - Inlet flange nominal bore: DN 80 - Discharge flange nominal bore: DN 40 - Nominal pressure, inlet: PN 10 - Nominal pressure, discharge: PN 10 Coupling: - Manufacturer: Flender - Coupling type: Eupex NH with spacer sleeve Baseplate: Cast iron Electric Motor: - Manufacturer: AEG AM 132 - Efficiency class: IE 0 - Motor speed: 1476 rpm - Frequency: 50 Hz - Rated voltage: 400 V - Rated output: P2 7.50 kW - Thermal class: F - Degree of protection: IP55 - Power factor cosφ: 0.82 Dimensions: - Length: 1270 mm - Width: 550 mm - Height: 570 mm - Weight: 300 kg Properties of material 1.4593 Noridur: Excellent for use in: - Chemical and process industries - Sulphuric and phosphoric acid applications - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulphurisation plants - Acidic, chloride-laden wash suspensions Dkedpfxjiuznus Aiwsl - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Condition: used, Pump, Wilo IPL50/175-7.5/2; 7.5 kW; Used machine Manufacturer: Wilo Type: IPL50/175-7.5/2 Overall dimensions: Width: 270 mm Dkedpfey Ezb Tsx Aiwsl Depth: 380 mm Height: 670 mm Electrical data: 400V; 13.6 A; 7.5 kW Maximum pressure: 10 bar Fluid temperature range: −20 °C … +120 °C Maximum flow rate: approx. 69 m³/h Maximum delivery head: approx. 38 m

Condition: excellent (used), Year of construction: 1996, I sell the ventilator OWENT OLKUSZ WTOP40 Dedpfx Aewun Hheiwjkl Ventilator 7,5 kW - 10 HP Total power 10.000 m3 / hr. Possible to sell immediately

Condition: new, Year of construction: 2025, functionality: fully functional, planing width: 630 mm, number of blades: 102, height adjustment type: electric, table width: 630 mm, Equipment: low noise, motor brake, For sale is a HOFMANN AD 635 jointer-thickness planer in premium industrial design. The machine features a HELIX spiral cutterhead (630 mm), a powerful 7.5 kW motor, and a thickness table positioning control. Equipment / Highlights: + HELIX cutterhead, 630 mm – 102 carbide reversible knives + Very quiet operation, reduced vibration + Excellent planed surface quality + Motor power: 7.5 kW (upgrade from standard) Dodpfx Asx Ir N Toiwjkl + Digital positioning control for the thickness table – sensor monitoring with photoelectric switch + Electronic start and braking unit + Two feed speeds: 7 / 14 m/min + Thickness table supported by 4 posts, quadruple guidance + Rubber-coated infeed and outfeed rollers + SUVAMATIC cutterhead guard + Integrated operating hours counter + Robust industrial construction Technical data: + Planing width: 630 mm + Cutterhead: HELIX, solid steel + Cutterhead speed: 5,800 rpm + Knives: 102 carbide reversible knives (37°) + Motor: 7.5 kW, 400 V / 50 Hz + Feed speed: 7 / 14 m/min + Extraction ports: 2 × Ø 160 mm Scope of delivery: + HOFMANN AD 635 Jointer-Thickness Planer + HELIX Spiral Cutterhead + SUVAMATIC Safety Guard + Positioning Control + Operation manual (German) HOFMANN AD 635 Jointer-Thickness Planer | HELIX | 7.5 kW | Display unit Manufacturer: HOFMANN Maschinenfabrik GmbH – Made in Germany HOFMANN AD 635, jointer-thickness planer, thickness planer, jointer, combination planer, HELIX cutterhead, spiral cutterhead, woodworking machine, joinery machine, carpentry machine, industrial planer, planer 630 mm Machine type: Joiner-thickness planer (combination machine) Model: AD 635 Year of manufacture: 2025 Condition: New / showroom machine Location: Haldensleben – Shipping available from stock

Condition: good (used), Year of construction: 1995, planing width: 630 mm, height adjustment type: electric, number of planer blades: 4, planing height: 250 mm, Equipment: motor brake, ⭐ MARTIN Thickness Planer T44 – 7.5 kW – Tersa – Digital Display – Electric Table Height Adjustment – Top Industrial Quality ⭐ For sale is a high-quality MARTIN T44 thickness planer from German industrial production – renowned for its exceptional smooth operation, precision, and durability. This machine is perfectly suited for professional joineries, timber construction companies, or demanding workshops seeking a reliable, heavy-duty machine. ✅ Technical Data & Features: +Manufacturer: MARTIN +Model: T44 +Planing width: 630 mm +Planing height: 2.8 – 250 mm +Year of manufacture: 1995 +Motor power: 7.5 kW (powerful industrial motor) +Tersa knife system – fast knife change without adjustments +Digital thickness table display for precise operation +Electric thickness table adjustment +Robust, low-vibration cast iron construction +Rubber-coated outfeed roller Djdpfsyh I Etox Aiwekl +Central lubrication +Very clean planed surfaces and quiet running ️ Condition: +Well-maintained used machine from ongoing production +Technically flawless +Ready for immediate use +Age-appropriate signs of use Inspection and test run possible by appointment – machine can be tested on site. Price: €9,200 net Location: 39340 Haldensleben Shipping by freight carrier available

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, planing width: 630 mm, number of planer blades: 4, Equipment: motor brake, Panhans Thickness Planer 436 DH 400 – 630 mm – Tersa – 7.5 kW – Excellent Condition For sale: Panhans thickness planer type 436 DH 400 in excellent condition. Robust, precise machine with electric height adjustment, digital display, and Tersa quick-change system. Technical data: Planing width: 630 mm Planing height: 250 mm Motor: 7.5 kW Feed speed: 7 + 14 m/min Table length: 1,110 mm Weight: approx. 700 kg Dodpfx Aow U Thijiwskl Price: €8,900 net (plus VAT) Shipping by freight company possible Available ex stock Haldensleben

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Dkedpfx Ajtx Aknjiwel Ready to use condition.

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Dedewr Ul Sspfx Aiwekl Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2008, condition: excellent (used), Elektromotor 7,5 Kw 1445 Ford Leroy Somer LS132MT mehr zu verkaufen Seriennummer: ctm: 165 Dodpohr Uw Sofx Aiwekl Leistung: 7,5 kW Drehzahl: 1445,-/min 400 V 50 Hz 15, 40 A Wellendurchmesser: 34mm doppelte Riemenscheibe Stummelschaftlänge: 90 mm Fußloch: Länge: 140mm Wind: 220mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Dksdjdtq Anepfx Aiwjl

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x847x790 mm Dsdpfx Aievz E Dlswskl Weight 250 kg Total power requirement 7,5 kw

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Dkodpfsufr H Asx Aiwjl

Condition: new, 3 waste bags capacity 8000 m3/h motor power 7.5 kW Dkodpjxnyltefx Aiwel bag shaking mechanism air return channel power supply 380V

Condition: excellent (used), For sale: VEM electric motor in industrial version. The motor is used, in good visual condition. Visible signs of use and deposits and rust on the flange resulting from operation and storage. The motor is operational. Ideal for industrial applications, machinery, pumps, fans, and production lines. Technical data: Manufacturer: VEM Power: 7.5 kW Dodpfx Aeyv Uuzsiwekl Rotational speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Supply: 3 phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: Used Signs of use Visible corrosion on parts

Condition: new, For sale: Industrial electric motor, 7.5 kW, flange-mounted design. The motor comes from warehouse stock and has never been used. Visible storage marks and significant rust on the housing – condition as shown in the photos. Ideal for industrial applications, pumps, fans, machinery, and production equipment. Technical data: Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 380–420 V Frequency: 50 Hz Power supply: 3-phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 65 kg Flange-mounted design Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: New old stock Dedpoyv Utkjfx Aiwskl Never used Visible rust on the housing

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully until the end!! The pump is not suitable for: Water, food industry, or non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are more appropriate. Attention!! The pump does not have explosion protection certificates. Dksdoigqutepfx Aiwsl It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal is also not EX-certified! The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chromium-nickel steels are no longer sufficiently corrosion-resistant. It is especially used where chloride-induced pitting and crevice corrosion or stress corrosion cracking could be an issue. Alloy 59 is used for: environmental technology, chemical industry (chemical processes involving oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Grade 2.4605 is predominantly used in the chemical industry, the pulp and paper industry, and in flue gas desulphurization plants. Excellent resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid, especially to mixed sulfuric/hydrochloric acid environments. Typical applications include: - Plant components for organic chemical processes with chloride-containing media, especially when catalysts based on chlorides are used - Multipurpose installations in the chemical industry - Plant parts in the fine chemical and pharmaceutical industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulphurization units (FGD) in fossil-fuel power plants and waste incineration plants - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brine applications - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulphuric acid coolers - Piping in geothermal power plants - Components in flue gas desulphurization units Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings new, mechanical seal reconditioned by specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Dedpfx Aijd N Dn Djwokl Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: used, Year of construction: 2000, used, top condition, low hours Make: Schuko Model: TSK 250 CE Year of manufacture: 2000 Machine no.: Motor: 7.5 kW Connection diameter: 250 mm Pressure approx. 2725 m³/h Air flow rate: 4595 m³/h Steel impeller Belt drive Dkjdoycxh Repfx Aiwjl Vibration dampers Space requirement approx. 1300 x 700 x 1300 mm Weight approx. 200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-inspected condition, without warranty or guarantee.

Condition: used, Year of construction: 1995, used, good condition manufactured by Luftus type LRM - WTS built in 1995 Masch.-No. 950071 for chips low speed ca. 1400 rpm motor 7,5 kW connection diameter 300 mm pressing pa. 2000 m³/h air capacity 6000 m³/h steel wheel required space ca. 1200 x 800 x 1200 mm weight ca. 250 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - Djdjvwfbpopfx Aiwokl

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: Dkodpjyk I U Asfx Aiwel - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: good (used), Pull cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, multi-purpose cylinders -Manufacturer: Enerpac, Hydraulic Cylinder Double Acting Pressure Force 9 Ton -Type: BRD96 Dksdpfx Aiovq Ii Nswsl -Stroke: 150 mm -Piston rod: Ø 25.4 mm / M22 x 1.5 -Dimensions: 350/63.5/H100 mm -Weight: 6.8 kg

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, Hydraulic unit -Motor: VEM 7.5 kW / 1430 rpm -Individual components: Hydac Hawe Hoerbiger see photos -Dimensions: 860/320/H420 mm Dksderanngepfx Aiwsl -Weight: 97 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 170 mm, number of blades: 13, total length: 1,476 mm, total height: 1,886 mm, total width: 1,009 mm, rotor length: 400 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 12 mm, warranty duration: 12 months, We are a company with over 30 years of experience in the trade of machines for the plastics processing industry. All machines offered are available at our premises and can be tested on your material. Djdpfxsyanf Ho Aiwjkl The GCV series machine is a modern device that combines the functions of initial shredding and final granulation of plastics. This allows various types of plastics, and more, to be processed in a single operation. The upper section of the machine is responsible for pre-shredding: material is fed onto rotating knives which precisely cut it. An additional special feeding system ensures the efficient introduction of material into the machine. The lower section is the grinding zone, where the rotor construction and the method of material feeding can be adjusted depending on the type of material, its properties, and the desired throughput and final regrind size. Importantly, after processing, the material does not require any additional transfer between devices. The machine has a compact design, requires little space, and offers an excellent price-to-performance ratio. Shredder specifications: Shredder motor power: 11 kW Rotor knives: 13 + 2 Fixed knives: 4 Granulator specifications: Granulator motor power: 7.5 kW Rotor knives: 6 Fixed knives: 2 Weight: 1,110 kg Cutting chamber dimensions: 400 × 550 mm If you are interested in GENOX machines from the UK, Germany, Portugal, Hungary, Spain, Russia, France, or Turkey, please contact the local Genox dealer in these countries. If you are from another country, please contact us, and we will assist you in selecting a machine and conducting tests in Poland.

Condition: ready for operation (used), Siemens 1HU3056-0AC01 SN: BRD57608701003 Permanent Magnet Motor, used, normal signs of use, 100% functional, scope of delivery as per photos. Dksdpfx Aisx Dvfzswol