Used Drying Cylinder for sale (9,975)

Year of construction: 1981, condition: ready for operation (used), diameter 800 mm roll surface width 1800 mm heating system Sattdampf 0 0 860 Liter 0 5 bar max. temperature 168 ° C Rodsw Tm Tijpfx Aahow range L-W-H 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works.

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit Rsdpfxey Nkqxe Aahsw The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Rsdpezgc Uhjfx Aahew Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine Rodezgc Ubspfx Aahsw This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine Rjdpfx Aszc Rxboahew A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: excellent (used), I am offering a professional LUKAS LZR 12/550 hydraulic rescue cylinder, used by fire brigades and in technical rescue operations. This equipment is from the renowned German brand LUKAS, designed for rescue work during road accidents and technical operations – very robust and durable construction. Condition: The item is used. Normal signs of use are visible (scuffs, worn label – see photos). Technical condition is unknown – sold as untested / for inspection. Technical data (from markings): Model: LZR 12/550 Manufacturer: LUKAS (Germany) Type: hydraulic cylinder / spreader Application: technical rescue, hydraulic power Equipped with working tips Set includes: LUKAS LZR 12/550 hydraulic cylinder Mounting element as shown in the photos Applications: Fire brigades (voluntary and state) Road rescue operations Technical and maintenance work Can also be used in hydraulic power applications. Rodpfsyxtabjx Aahsw

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Rjdpjwzyg Hofx Aahow

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: Rjdpoq Nd Rbsfx Aahew - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Redpswmy Risfx Aahjw Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Year of construction: 2015, operating hours: 8,286 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: Drymex S 5, Beautiful, robust drying system consisting of 2 units, 1 large stainless steel drying chamber with perforated floor, including piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food products (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), permitted for indoor use only. The individual segments of the perforated floor can be lifted up separately for cleaning. Excellent condition, very solid construction. Dimensions: Units – 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301. Unit 1: Year of manufacture 2012, Unit 2: Year of manufacture 2014, Drying chamber: Year of manufacture 2015. Price negotiable. Rjdpfx Asyffqqjahsw

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Rsdpsya Hvqefx Aahow Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Rjdpfew Eb Uaox Aahsw Automatic Stacker: SPS AUTOSTACK 2

Condition: used, Trolley 12 levels Rsdpfxewbtvus Aahew - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. Rodpoxfkbaefx Aahsw - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. Rodpfeu S N R Eex Aahsw - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Year of construction: 2022, condition: new, Shelves: 17 Clear distance between tubes: 60 mm Tube length for support: 650 mm Redpfx Aasd Ry I Njhow Length: 200 - 2000 mm Steering rollers: Polyamide, 4 pieces Depth: 870 - 1180 mm Height: 198 mm Load capacity: 400 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder Redpfx Aezhlcqjahjw -Manufacturer: Linde, double-acting hydraulic cylinders for forklifts -Item No.: 613596 -Stroke: 75 mm -Piston rod: Ø 22 mm -Hole: Ø20 mm / Hole spacing 287 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 345/68/H90 mm -Weight: 3.9 kg/pc.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Baumann, double-acting hydraulic cylinder from side loader -Stroke: 1275 mm -Piston rod: Ø 40 mm -Hole: Ø25 mm / Hole spacing 1525 mm -Quantity: 1 cylinder available -Dimensions: 1575/80/140 mm Redpfx Aezg Ud Ujahow -Weight: 36 kg/pc.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Baumann, double-acting hydraulic cylinder from side loader -Stroke: 180 mm -Piston rod: Ø 60 mm -Hole diameter: Ø25 mm / Hole spacing 400 mm -Number: 2 cylinders available Rodpfx Aozg Udzoahsw -Price: per piece -Dimensions: 455/127/164 mm -Weight: 20 kg/pc.

Condition: used, Year of construction: 2013, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Rjdpsvwfhiofx Aahew

Condition: good (used), functionality: fully functional, Pfeiffer Vacuum Technology AG dry vacuum pump, Ed. 15, ADP 122 P Model: ADP122P Condition: Used Rsdezh I S Uspfx Aahjw Technical data: 200-208V General: Multi-stage, dry-running rotary vane vacuum pump Water cooling Nominal pumping speed: 95 m³/h (50 Hz), 112 m³/h (60 Hz) Ultimate pressure (without N₂ purge): up to approx. 1.5 × 10⁻² mbar Motor power: 1.5 kW N₂ purge: available (P-version) Inlet (suction side): DN 50 ISO-KF Outlet: DN 40 ISO-KF Integrated electronics with frequency converter Power connection cable with Hubbell HBL2421 NEMA L6-20P twist-lock plug, 20 A / 250 VAC, L=80cm Accessories: Adixen control panel / display unit P/N 119419, firmware V3.06.07, with LCD display and foil keypad Note on item condition: Gases that have been pumped: NF₃/N₂

Condition: excellent (used), The PFAFF 335 H3 2/27 is a high-quality German sewing machine equipped with a cylindrical arm, a work table, and an EFKA Variostop drive. This model is used for sewing leather, upholstery, leather goods, footwear, suitcases, and other items with complex shapes. Technical specifications: Manufacturer: PFAFF Rjdpfezgt Tuex Aahjw Model: 335 H3 2/27 Cylindrical arm EFKA Variostop VD24 drive Power supply: 220 / 380 V Motor power: 370 W Rotational speed: 1400 / 1700 rpm 50 / 60 Hz Work table included Bobbin stand Foot control Condition: Used machine. In good visual condition. Condition as shown in the photos.

Condition: excellent (used), mileage: 573,415 km, power: 206 kW (280.08 HP), first registration: 01/1979, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, Year of construction: 1979, Front axle: Steering Rear axle: Double wheels Number of cylinders: 6 Technical condition: very good Visual appearance: very good Registration number: 1BRK466 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam Rjdpozhxmvefx Aahsw IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, CORMAK DI08 Dry Ice Blasting Machine The CORMAK DI08 is an ultra-portable, light-duty dry ice blasting machine designed for automotive detailers, vehicle service centers, and professional industrial workshops. Thanks to its lightweight construction and compact design, the machine is easy to transport, position in confined spaces, and use on a wide variety of surfaces without the risk of damage. Rjdpfx Ajzht Eaeahsw The unit operates with 2.5–3.0 mm dry ice pellets, providing precise and safe cleaning of delicate and technical components. An adjustable dry ice feed rate and controllable blasting pressure allow the cleaning process to be tailored to the type of contamination and the specific surface being treated. KEY FEATURES Ultra-portable design – weighs only 9 kg with compact dimensions of 310 × 190 × 320 mm Compact and easy to use – ideal for workshops, service centers, and field applications Adjustable dry ice feed rate: 0–0.13 kg/min Versatile applications – suitable for cleaning machinery, tools, electronics, industrial equipment, and automotive components Safe and environmentally friendly cleaning method – no chemicals, no water, and no risk of scratching surfaces APPLICATIONS The CORMAK DI08 is ideal for: Automotive and motorcycle detailing Maintenance of industrial machinery and equipment Cleaning molds, tools, and precision components Cleaning electronic circuit boards Preventive maintenance and industrial equipment servicing PACKAGE CONTENTS You receive a brand-new CORMAK DI08 Dry Ice Blasting Machine, ready for operation with dry ice pellets, supplied with: CORMAK DI08 dry ice blasting machine 3 kg dry ice pellet hopper A selection of nozzles in various shapes and sizes for precise adjustment of the blasting stream The different nozzle shapes and sizes allow the blasting pattern to be matched to the workpiece and application, increasing the machine's versatility for everyday use. TECHNICAL SPECIFICATIONS Power: 42 W Power Supply: 230 V AC, 50 Hz Compressed Air Consumption: 0–2.0 m³/min Dry Ice Feed Rate: 0–0.13 kg/min (adjustable) Hopper Capacity: 3 kg Weight: 9 kg Dry Ice Type: 2.5–3.0 mm pellets Dimensions (L × W × H): 310 × 190 × 320 mm

Condition: used, The comfortable Varioflex rack trolley is designed for flexible and gentle storage of painted workpieces. Additionally, its 4 swivel castors allow for the transport of the workpieces. Its stable tubular frame construction can be adjusted from 200 to 2000 mm. With 17 inner and 17 outer support tubes per side, the trolley can handle weights of up to 400 kg with evenly distributed loads. The plug-in inner and outer support tubes can be optionally removed and re-inserted at the rear. When not in use, the rack trolley can be collapsed to save space. Optional accessories: - Plastic-coated support tubes - Additional rack Redpjy Dkg Asfx Aahew Technical data: Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1855 mm Support tube length: 650 mm - extendable up to: 1150 mm Clear spacing between tubes: 70 mm Load capacity: 400 kg Availability: short-term Location: Röllbach