Used Draabe Humidification for sale (73)

Year of construction: 1995, condition: used, Luftbefeuchtung - Humidification DRAABE AC 2040 Aqua-OffsetYear 1995 - Serial-No. 20 Online-Video-Inspection by Skype-Video Dodpfx Aish Ax Sgolocn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2009, The new, cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with a clear concept. Key features of the K-MT adsorption dryer series include: • Adsorber profiles manufactured in one piece • Separately controlled main and blow-down valves in a leak-proof design • Compact check valve combination, which guarantees continuous operational reliability while maintaining high availability. All adsorption dryers in the K-MT series feature: • Self-cleaning sieve beds on the wet side • High-quality desiccant During adsorption, the desiccant absorbs the moisture contained in the compressed air. Parker Zander uses only highly active desiccant of the molecular sieve type with high capacity. This desiccant guarantees a long service life, even at high inlet temperatures or low pressure dew points. Regeneration takes place in counterflow to the adsorption process. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerating adsorption dryers refers to: Operating pressure: 7 bar Dedpjypb Dusfx Ailecn Inlet temperature: 35°C Pressure dew point: -40°C in a cycle with: - 5 minutes adsorption - 4 minutes desorption - 1 minute pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load changes per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load changes per hour and therefore inevitably results in 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs while reducing wear and tear. Multitronic, the control system, with new, groundbreaking functions and a new design, is perfectly tailored to the cold-regenerating adsorption dryers of the K-MT series. It enables the highly effective adaptation of the adsorption dryer, even to extremely diverse operating conditions. From the permanently visually recognizable status to the pressure dew point control of the adsorption dryer, the benefits for the operator are clearly evident with multitronic. The multitronic system, housed in a clear and easily accessible control cabinet, offers: • A comfortable microprocessor control for all Parker Zander heatless dryer systems • Flexible adjustment of cycle times is possible. • LEDs on the front for the individual functions, such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as a synchronous control with the compressor Possible options: • Direct pressure dew point measurement including a digital display • A potential-free output for the pressure dew point limit value • The ability to set the desired dew point in the range of -25°C to -40°C. Technical data: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection Watt: 50 Year of manufacture: 2009 Manufacturer's price: €8,880

Year of construction: 2020, condition: used, machine/vehicle number: E22SJ20072839180, The iCombiPro is the latest combination oven from RATIONAL. The iCombiPro 20-2/1 electric model, with 20 GN 2/1 or 40 GN 1/1 trays, is also easy to operate for untrained personnel, as it achieves outstanding food quality without requiring constant monitoring. The super-fast intermediate and self-cleaning cycles keep your appliance sparkling clean. The combination oven has been completely refurbished in our in-house workshop and is therefore fully functional and free of defects. A 6-month warranty is provided on all electrical components. The iCombi Pro has only operated for 5834 operating cycles/hours! Manufacturer's recommended retail price: €37,640 net = €44,792 gross Offer price: €16,500 net = €19,635 gross Our service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional and competent advice – before and after purchase Flexible shipping or self-collection options Provision of operating instructions, connection diagrams & spare parts Complete range of accessories at attractive prices Condition: used, inspected, fully functional Dcodpfxozwu U Ij Ailsn Technical data: W x D x H: 1082 x 1117 x 1872 mm Minimum door opening dimensions for transport W x H: 1200x1900mm Serial number: E22SJ20072839180 Year of manufacture: 07/2020 Max. loading quantity / tray: 5 kg Max. total loading quantity: 100 kg Weight of electric appliance: 325 kg Electrical connection conditions: Voltage 3 NAC 400 V Electrical connection value: 67.9 kW Steam operation power: 54 kW Hot air power: 66 kW Fuse rating: 100 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Other information: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Detects the size, loading quantity and product condition and calculates the browning accordingly Learns which cooking habits are often used and implements them Determines the ideal cooking path for the desired result MyDisplay - user-adjustable, user-specific display TFT color display and touchscreen Application and operating manual can be accessed on the device display Core temperature sensor with automatic error correction in case of punctures and positioning aid Door compartment with glazed, energy-saving glass LED interior lighting Including energy consumption display Humidity control: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Humidification adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: rapid cooling of the cooking chamber Automatic adjustment to the installation location (altitude, climate etc.) Appliance door with ventilated triple-glazed pane and pivoting inner pane Fixed wastewater connection according to SVGW permissible Splash and spray water protection IP X 5 Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection with date and time adjustable Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Subject to changes and errors.

Condition: excellent (used), Carel HeaterSteam UR020HL10S isothermal steam humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. Dcodpfeu Eb A Njx Ailen It produces steam by heating heating elements that are immersed in a steam cylinder filled with water. This can be ordinary tap water or completely demineralized water. The heat generated by the heating elements heats the water to a temperature of 100 °C. Technical data: Dimensions (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Voltage supply: 400 V/3 Steam pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G external Steam distribution For optimal humidifier performance, the steam produced must be distributed homogeneously throughout the room to avoid droplet formation and condensate accumulation. This can be achieved either with ventilated steam distributors or steam lances. The choice of steam distributor depends on the room in which the steam is to be introduced. For direct room humidification (in rooms, factory halls, etc.), ventilated steam distributors (optional) with a motor fan should be used. If, on the other hand, the steam is to be distributed in a duct or in HVAC systems, steam lances must be used, which utilize the velocity of the air flowing through for humidification. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp Dodpfoz Idb Nex Ailecn - AD BLUE system - Weight: 20,000 kg - Remote control - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm - Teeth: 24

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Dodpfx Aisxbgrgjlecn Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total length: 6,700 mm, working width: 650 mm, total width: 1,100 mm, table length: 5,200 mm, Canol Make-Up-Line "Canolino" 5.2 (with about 670 cm overall length) Make-up-table / -line / dough-processing-line "Canolino" 5.2 with about 65 x 520 cm working belt, year 2004, designed to produce a wide variety of products like puff- pastry products with odr without filling, yeasted products and other pastry specialities. The "Canolino" line is easy to use and mounted on wheels, it comes with a dough-belt calibraion head, a huge varity of different cutting rollers (incl. croissant roller or special roller for "Stutenkerle" (=sweet-yeast-dough / gingerbread-man), a water-drop humidification station, a volumetric filler (V4 F) / electric screw-depositor with 4 outlets, suitable for dosing creamy products with spot, continuous or intermittent dosing, a motorised winding roller, for example for snails or other wound products, various winding and folding tools and pressure rollers as well as a motorised guillotine knife for cross-cutting. Perfect for the use in small and medium-sized bakeries. The wide range of easy-to-use and also easy to mount accessories can be changed in a short time nearly without tools. The electric guillotine can also be moved on the desired position. The make-up table is manual controlled for very simple operation and managing the various work functions. All components and accessories are electrically operated (also filler, guillotine knife) so there is generally no need to use compressed air. The make-up-line and all accessories (as shown in the photos) are in good "bakery-condition" and are offered for sale fully cleaned and ready for use. Dimensions: approx. 670 cm in total length, approx. 110 cm in width and approx. 195 cm in height (control unit and filling station) Dcsdpfxey Na T Ns Ailjn

Condition: like new (used), Year of construction: 2021, For sale Food Dryer - Dehumidifier. Used a few times. Max. indoor temperature: 60 degrees Celsius. Flow rate: 4500 m3/h Shell for products: 25 psc. Power required: 220V 50Hz Djdpfoibwb Tex Ailscn More parameters in photos. If you have an questions on this, please do not hesitate to contact us.

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climate Cycle Test Chamber Weiss SC 1000/+20 IU Corrosion Climate Cycle Test Chamber The test system is a combination of a climate testing chamber with variable temperature and humidity and a corrosion testing chamber with a salt spray test. In a time-lapse mode, vulnerable metallic components are tested for corrosion according to the relevant standards. Temperature operating range: Temperature: +20 °C ... +60 °C Time-dependent temperature deviation: +0.5 K Climate operating range: Temperature: +20 °C ... +60 °C Time-dependent temperature deviation: +0.5 K Relative humidity: 10...98 % RH Time-dependent humidity deviation: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (temperature range: ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray with a two-nozzle system, 1.5 x 0.5 mV80 cm? h) Control: Digital measuring and control system SIMCON/32*-Net with touch panel Interfaces: serial interface RS 232 C, parallel printer interface Operating modes adjustable via process controller: - Temperature control - Climate control - Salt spray test - Direct spraying with salt solution - Condensation load - Flushing of test chamber walls Dedpfjph U Dhex Ailocn - Drying/ventilating the test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measuring system tft’ (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions: Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between the heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, left-hinged Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load: 100 kg Brine storage tank: approx. 200 l, with level monitoring, located separately to the side/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connected power: 13 kW Weight: 1300 kg You can find more items - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Dsdpfjzp H Tysx Ailscn Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Year of construction: 1970, condition: ready for operation (used), Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible. Djdpfx Aiezghfljlscn

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Fitotron® modular plant growth chambers, Type HGC 1014 V, incl. HQI-T and Krypton lighting module Temperature range +5°C to +45°C for temperature testing Test chamber volume approx. 1300 L Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers feature a modular design. Individual modules can be added or exchanged as needed, allowing the units to be adapted for various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature fluctuation: ± 0.5 K Dedpfxszpv Iaj Ailecn Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption (without fresh air operation at 25°C / 75% RH): approx. 0.8 kW Specifications for climatic testing with irradiation Temperature range: +10°C to +45°C (with lights on) Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Humidification and dehumidification system; stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door unit with observation window Interface for computer connection Power supply: 3/N/PE 400V ±10% 50Hz CE marked, mobile, very good condition Cable/pipe port: Ø 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg (lighting module) Four units of this model are available for sale. Please feel free to contact us if you have any further questions.

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. Dodpfey Ua Rxsx Ailocn - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: like new (used), Year of construction: 2022, overall weight: 250 kg, BOGE DS 350 refrigerant air dryer Dodjxcb Edjpfx Ailjcn

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Dedpfxozcxbwo Ailjcn Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Condition: excellent (used), Huber & Ranner Air Handling Unit (AHU) For sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was used as a recirculating air unit for a paint booth and is in excellent, clean, and professionally maintained overall condition. The system controls the complete air climate (filtration, cooling, humidification, and air supply) and is ideally suited for production halls, paint shops, wood or metal processing, and large-scale industrial projects. Technical data of the complete system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System Reference: SPK ULA) Order Number: 19 0090 Z / P.010 Volume Flow / Air Capacity: 31,000 m³/h The modular components in detail: High-performance fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Max. frequency: 49.7 (54.4) Hz Integrated cooling coil (cooler): Cooling capacity: 50 kW Material: CU / AL (copper/aluminum) Refrigerant: R134a Highly efficient filter stage: Filter class: F9 / Standard (fine dust filter for the highest air purity) Filter type: TM 9U635A10-1 (Quantity: 9 pieces) Dedpfx Aiszrmctslecn Recommended final pressure: 250 Pa Humidifier & droplet separator module: For precise regulation of humidity, including an integrated droplet separator to prevent moisture transfer into the air duct. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs available upon request!

Condition: reconditioned (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE Dcedozx Rz Tjpfx Ailen - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Dcedpjytr Swjfx Ailsn Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: excellent (used), Year of construction: 2015, Refrigeration dryer BOGE DS 95 Capacity 9.5 m3/min Dcedpfok Nb T Dsx Ailen year of manufacture 2015, THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: used, Year of construction: 2009, Seeding station with discharge system, BmTEC, 2-row configuration Year of manufacture: 2009 Condition: refurbished Working width: 300 mm Infeed height: 820 mm Humidification belt with integrated water bath for humidifying the underside of the dough Immersion depth adjustable Tilting belt with adjustable tilting height for reliable turning of the dough pieces Sprinkling from above with adjustable sprinkling quantity Adjustable pressure roller for fixing the sprinkled material Automatic seed return Includes 2 spreading containers All belt speeds are adjustable Dcedjz A Sgcjpfx Ailen Fast and slow discharge possible Automatic sheet feed Max. discharge length: 800 mm External dimensions (L x W x H): 330 x 130 x 220 cm

Condition: used, Year of construction: 2009, Roll production line WP Multimatic MUS Rollmeister SC 51 Year of manufacture: 2009 Suitable for sliced rolls, round rolls, and long rolls Maximum hourly output: approx. 5,100 pieces Weight range (without proofing): 30-90g Weight range (sliced rolls): 40-65g Djdpfxoz A Sd Ij Ailecn Pre-proofing cabinet I (before long rolling): 6 minutes Pre-proofing cabinet II (after long rolling, before cutting): 6 minutes Dough divider and rounding machine Multimatic MUS, 4-row Pressure roller on spreading belts after the head machine Long rounding station Pressure roller before the cutting station, height-adjustable Cutting station Bypass for green operation without proofing cabinet Discharge device for Euro pallet sizes With heating and humidification With tunnel dryer

Condition: used, functionality: unexamined, For sale: Air Dryer Type FD 120 3x380/415V; 50Hz Serial no. 302210 Dodpeyutnpsfx Ailjcn Net price: EUR 1,100 negotiable.

Condition: used, Year of construction: 2018, Roll production line Fortuna Magnus S6 Profiline Dough divider and rounder Fortuna Magnus S6, year of manufacture: 2018 6-row head machine Weight range 50 g to 140 g Proofing cabinet with heating and humidifier, year of manufacture: 2012 Operation without proofing cabinet possible Long rolling station Cutting unit Punching unit Seeding station with humidification for one-sided seeding Depositor for baking trays or depositing onto a conveyor belt for further processing Dodpfxoz A R Ace Ailjcn More information, pictures and videos will follow...

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm Dedpezuzctofx Ailocn - Working height (constant): 900 mm - S

Condition: used, Year of construction: 2001, Seed station Kemper 800 mm Dcedpfsz A Skuox Ailsn Year of manufacture: 2001 Condition: refurbished Suitable for integration into production lines with a working width of up to 800 mm Standalone machine with its own control cabinet Adjustable spreading rate Adjustable spreading duration Return conveyor for unused seed Extendable mesh belt Humidification and seeding can be switched off Pressure rollers at the inlet and outlet with adjustable pressure height Turning station after humidification Includes 1x spreading container and 1x extendable mesh belt